[Bug 1894356] Re: could not acquire name on session bus by simultaneous login by XDMCP and keyboard
** Bug watch added: Debian Bug tracker #969564 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=969564 ** Also affects: lightdm (Debian) via https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=969564 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894356 Title: could not acquire name on session bus by simultaneous login by XDMCP and keyboard To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm/+bug/1894356/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1752091] Re: gvfsd-metadata[1703]: g_udev_device_has_property: assertion 'G_UDEV_IS_DEVICE (device)' failed
In my case, the bug apparead when I mounted an Cryptomator volume and began to navigate on it. Ubuntu 18.04 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1752091 Title: gvfsd-metadata[1703]: g_udev_device_has_property: assertion 'G_UDEV_IS_DEVICE (device)' failed To manage notifications about this bug go to: https://bugs.launchpad.net/gvfs/+bug/1752091/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894356] [NEW] could not acquire name on session bus by simultaneous login by XDMCP and keyboard
Public bug reported: This symptom is observed with Ubuntu Mate 20.04. 1. Create /etc/lightdm/lightdm.conf.d/10-xdmcp.conf as [XDMCPServer] enabled=true and restart lightdm. 2. Login as a normal user from keyboard. 3. Login as the same user as 2 from XDMCP gives "Could not acquire name on session bus" and I cannot login from XDMCP. Without Step 2, XDMCP login succeeds. The same symptom is reported at https://github.com/neutrinolabs/xrdp/issues/1559#issuecomment-623977001 which recommends removal of "dbus-user-session" Ubuntu package. I worked around the above issue by putting "unset DBUS_SESSION_BUS_ADDRESS" in /etc/X11/Xsession.d/ The same issue is also reported at https://bugs.launchpad.net/ubuntu-mate/+bug/1769353 ** Affects: lightdm Importance: Undecided Status: New ** Affects: ubuntu-mate Importance: Undecided Status: New ** Affects: lightdm (Ubuntu) Importance: Undecided Status: New ** Tags: ubuntu ** Also affects: lightdm (Ubuntu) Importance: Undecided Status: New ** Also affects: ubuntu-mate Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894356 Title: could not acquire name on session bus by simultaneous login by XDMCP and keyboard To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm/+bug/1894356/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894354] Re: Xubuntu has no OEM-Config slideshow
This bug has been reported on the Ubuntu ISO testing tracker. A list of all reports related to this bug can be found here: http://iso.qa.ubuntu.com/qatracker/reports/bugs/1894354 ** Tags added: iso-testing -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894354 Title: Xubuntu has no OEM-Config slideshow To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xubuntu-artwork/+bug/1894354/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894355] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894355 Title: Ubuntu 20.04 Microphone Background Noise To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894355/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1325337] Re: track queue doesn't work on different playlist
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: clementine (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1325337 Title: track queue doesn't work on different playlist To manage notifications about this bug go to: https://bugs.launchpad.net/clementine/+bug/1325337/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894355] [NEW] Ubuntu 20.04 Microphone Background Noise
Public bug reported: The microphone sounds just fine when I booted up with Windows 10, but in Ubuntu 20.04 the background noise is pretty loud. I have already tried enabling noise cancellation with PulseAudio, but it doesn't seem to work. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-45-generic 5.4.0-45.49 ProcVersionSignature: Ubuntu 5.4.0-45.49-generic 5.4.55 Uname: Linux 5.4.0-45-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jerwellescusa 4380 F pulseaudio /dev/snd/pcmC0D0c: jerwellescusa 4380 F...m pulseaudio /dev/snd/pcmC0D0p: jerwellescusa 4380 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sat Sep 5 12:39:31 2020 InstallationDate: Installed on 2020-08-06 (29 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13d3:5a02 IMC Networks EasyCamera Bus 001 Device 002: ID 0cf3:e500 Qualcomm Atheros Communications Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: LENOVO 81G2 ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-45-generic root=UUID=d6d16fb4-3439-4299-985d-5b1592314d74 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-45-generic N/A linux-backports-modules-5.4.0-45-generic N/A linux-firmware1.187.3 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/13/2018 dmi.bios.vendor: LENOVO dmi.bios.version: 8KCN16WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0K13455 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo ideapad 330-14IKB dmi.modalias: dmi:bvnLENOVO:bvr8KCN16WW:bd04/13/2018:svnLENOVO:pn81G2:pvrLenovoideapad330-14IKB:rvnLENOVO:rnLNVNB161216:rvrSDK0K13455WIN:cvnLENOVO:ct10:cvrLenovoideapad330-14IKB: dmi.product.family: ideapad 330-14IKB dmi.product.name: 81G2 dmi.product.sku: LENOVO_MT_81G2_BU_idea_FM_ideapad 330-14IKB dmi.product.version: Lenovo ideapad 330-14IKB dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894355 Title: Ubuntu 20.04 Microphone Background Noise To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894355/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894352] Re: bash-completion not working properly with directories with spaces in them when using some commands
The attachment "File containing the patch that corrects the regression" seems to be a patch. If it isn't, please remove the "patch" flag from the attachment, remove the "patch" tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the team. [This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issues please contact him.] ** Tags added: patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894352 Title: bash-completion not working properly with directories with spaces in them when using some commands To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bash-completion/+bug/1894352/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1886528] Re: BIND9: unable to set effective uid to 0: Operation not permitted
[Expired for bind9 (Ubuntu) because there has been no activity for 60 days.] ** Changed in: bind9 (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1886528 Title: BIND9: unable to set effective uid to 0: Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bind9/+bug/1886528/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882447] Re: Touchpad and sound doesn't work after the kernel update
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1882447 Title: Touchpad and sound doesn't work after the kernel update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1882447/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1886387] Re: Tried installing Ubuntu Linux, said not enough space, crashed
[Expired for ubiquity (Ubuntu) because there has been no activity for 60 days.] ** Changed in: ubiquity (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1886387 Title: Tried installing Ubuntu Linux, said not enough space, crashed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1886387/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1886331] Re: [amdgpu] Cannot boot sometimes - black screen with a mouse pointer.
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1886331 Title: [amdgpu] Cannot boot sometimes - black screen with a mouse pointer. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886331/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1886246] Re: Sometimes on my lock screen, my mouse stops for a moment
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1886246 Title: Sometimes on my lock screen, my mouse stops for a moment To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886246/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1885574] Re: Lenovo Ideapad S740 touchscreen is not working
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1885574 Title: Lenovo Ideapad S740 touchscreen is not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1885574/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1746738] Re: резервное копирование не удалось
[Expired for deja-dup (Ubuntu) because there has been no activity for 60 days.] ** Changed in: deja-dup (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1746738 Title: резервное копирование не удалось To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/deja-dup/+bug/1746738/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894353] [NEW] Crash: ValueError: could not convert string to float:
Public bug reported: Download https://media.prusaprinters.org/media/prints/2311/gcodes/32655_6e299825 -7afc-4f1c- ad73-811c8a61c99b/sierpinski-o6-s1_5-cleaned_02mm_pla_mk3s_14h32m.gcode#_ga=2.132405134.1452443573.1599278018-867410761.1597947727 From: https://www.prusaprinters.org/prints/2311-spiral-vase-mode-sierpinski-pyramid/files yagv /tmp/mozilla_whitis0/sierpinski-o6-s1_5-cleaned_02mm_pla_mk3s_14h32m.gcode & [1] 11433 whitis@cervantes:~/limbo_work_area/firearms/fosscad/FOSSCAD_MEGA_PACK_v4.8_(Ishikawa)$ Yet Another GCode Viewer v0.4 loading file '/tmp/mozilla_whitis0/sierpinski-o6-s1_5-cleaned_02mm_pla_mk3s_14h32m.gcode' ... Parsing '/tmp/mozilla_whitis0/sierpinski-o6-s1_5-cleaned_02mm_pla_mk3s_14h32m.gcode'... [WARN] Line 12: Unknown code 'M73' (Text:'M73 P0 R872') [WARN] Line 13: Unknown code 'M73' (Text:'M73 Q0 S872') [WARN] Line 14: Unknown code 'M201' (Text:'M201 X1000 Y1000 Z1000 E5000 ; sets maximum accelerations, mm/sec^2') [WARN] Line 15: Unknown code 'M203' (Text:'M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec') [WARN] Line 16: Unknown code 'M204' (Text:'M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2') [WARN] Line 17: Unknown code 'M205' (Text:'M205 X8.00 Y8.00 Z0.40 E1.50 ; sets the jerk limits, mm/sec') [WARN] Line 18: Unknown code 'M205' (Text:'M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec') [WARN] Line 19: Unknown code 'M107' (Text:'M107') [WARN] Line 20: Unknown code 'M115' (Text:'M115 U3.7.2 ; tell printer latest fw version') [WARN] Line 22: Unknown code 'M83' (Text:'M83 ; extruder relative mode') [WARN] Line 23: Unknown code 'M104' (Text:'M104 S215 ; set extruder temp') [WARN] Line 24: Unknown code 'M140' (Text:'M140 S60 ; set bed temp') [WARN] Line 25: Unknown code 'M190' (Text:'M190 S60 ; wait for bed temp') [WARN] Line 26: Unknown code 'M109' (Text:'M109 S215 ; wait for extruder temp') Traceback (most recent call last): File "/usr/bin/yagv", line 500, in App().main() File "/usr/bin/yagv", line 39, in main self.load(path) File "/usr/bin/yagv", line 67, in load self.model = parser.parseFile(path) File "/usr/share/yagv/gcodeParser.py", line 22, in parseFile self.parseLine() File "/usr/share/yagv/gcodeParser.py", line 45, in parseLine getattr(self, "parse_"+code)(args) File "/usr/share/yagv/gcodeParser.py", line 79, in parse_G28 self.model.do_G28(self.parseArgs(args)) File "/usr/share/yagv/gcodeParser.py", line 55, in parseArgs coord = float(bit[1:]) ValueError: could not convert string to float: [1]+ Exit 1 yagv /tmp/mozilla_whitis0/sierpinski-o6-s1_5-cleaned_02mm_pla_mk3s_14h32m.gcode apt-cache policy yagv yagv: Installed: 0.4~20130422.r5bd15ed+dfsg-4 Candidate: 0.4~20130422.r5bd15ed+dfsg-4 Version table: *** 0.4~20130422.r5bd15ed+dfsg-4 500 500 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu bionic/universe i386 Packages 100 /var/lib/dpkg/status lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 18.04.4 LTS Release:18.04 Codename: bionic ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: yagv 0.4~20130422.r5bd15ed+dfsg-4 ProcVersionSignature: Ubuntu 5.4.0-42.46~18.04.1-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.16 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Sep 5 00:01:15 2020 InstallationDate: Installed on 2019-05-02 (491 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: yagv UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: yagv (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894353 Title: Crash: ValueError: could not convert string to float: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/yagv/+bug/1894353/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894352] Re: bash-completion not working properly with directories with spaces in them when using some commands
In case the copy and paste of the text of the patch isn't usable, I have attached the file to this bug to make it easier to evaluate. Thank you! Very sincerely, Jason A. Pfeil ** Attachment added: "File containing the patch that corrects the regression" https://bugs.launchpad.net/ubuntu/+source/bash-completion/+bug/1894352/+attachment/5407781/+files/patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894352 Title: bash-completion not working properly with directories with spaces in them when using some commands To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bash-completion/+bug/1894352/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894352] [NEW] bash-completion not working properly with directories with spaces in them when using some commands
Public bug reported:
Good evening!
Unfortunately, I need to report an issue with Ununtu 20.04's bash-
completion (bash_completion version 2.10). It can't properly expand
directories with spaces when there are multiple options when using some
commands. Here is an example:
$ mkdir -p "p00p/p00p 1"
$ mkdir -p "p00p/p00p 2"
$ ls -d p00p/p00p\ 1 p00p/p00p\ 2
'p00p/p00p 1' 'p00p/p00p 2'
$ ls p00p/p0
p00p 1/ p00p 2/
$ ls p00p/p01 # <-- works: yields the expanded command: ls
p00p/p00p\ 1/
$ wine p00p/p0 # <-- does NOT work: fails to show possible
expansions: p00p 1/ p00p 2/
$ wine p00p/p01 # <-- does NOT work: fails to expand to: wine
p00p/p00p\ 1/
I temporarily fixed it by patching the portion of bash_completion which
invokes plusdirs with the version from my raspberry pi OS
(bash_completion version 2.8). Here's the patch that fixes it:
--- /usr/share/bash-completion/bash_completion 2020-09-04 20:39:18.453560935
-0700
+++ /home/xxx/bash_completion 2020-09-04 20:39:13.625394958 -0700
@@ -563,37 +559,28 @@
_tilde "$cur" || return
local -a toks
-local reset
+local x reset
-if [[ "$1" == -d ]]; then
reset=$(shopt -po noglob); set -o noglob
toks=( $(compgen -d -- "$cur") )
-IFS=' '; $reset; IFS=$'\n'
-else
+eval $reset
+
+if [[ "$1" != -d ]]; then
local quoted
_quote_readline_by_ref "$cur" quoted
# Munge xspec to contain uppercase version too
# http://thread.gmane.org/gmane.comp.shells.bash.bugs/15294/focus=15306
-local xspec=${1:+"!*.@($1|${1^^})"} plusdirs=()
-
-# Use plusdirs to get dir completions if we have a xspec; if we don't,
-# there's no need, dirs come along with other completions. Don't use
-# plusdirs quite yet if fallback is in use though, in order to not ruin
-# the fallback condition with the "plus" dirs.
-local opts=( -f -X "$xspec" )
-[[ $xspec ]] && plusdirs=(-o plusdirs)
-[[ ${COMP_FILEDIR_FALLBACK-} ]] || opts+=( "${plusdirs[@]}" )
-
+local xspec=${1:+"!*.@($1|${1^^})"}
reset=$(shopt -po noglob); set -o noglob
-toks+=( $(compgen "${opts[@]}" -- $quoted) )
-IFS=' '; $reset; IFS=$'\n'
+toks+=( $( compgen -f -X "$xspec" -- $quoted ) )
+eval $reset
# Try without filter if it failed to produce anything and configured to
[[ -n ${COMP_FILEDIR_FALLBACK:-} && -n "$1" && ${#toks[@]} -lt 1 ]] &&
{
reset=$(shopt -po noglob); set -o noglob
-toks+=( $(compgen -f "${plusdirs[@]}" -- $quoted) )
-IFS=' '; $reset; IFS=$'\n'
+toks+=( $( compgen -f -- $quoted ) )
+eval $reset
}
fi
Unfortunately, to apply the patch with patch -p0, I had to type in the
name of the file to patch because the patch I saved was only a subset of
the patch produced by "diff -u -w" and my diff-fu isn't good enough to
know how to fix it. But, providing the name of the file to be patched
when prompted (/usr/share/bash-completion/bash_completion) made it work
and after I sourced the new file the issue was fixed.
Thus, this appears to be a regression of sorts but my bash programming
skills aren't good enough to fix it myself while ensuring that any
functionality provided by the portions that I replaced isn't lost.
Thank you!
Very sincerely,
Jason A. Pfeil
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: bash-completion 1:2.10-1ubuntu1 [modified:
usr/share/bash-completion/bash_completion]
ProcVersionSignature: Ubuntu 5.4.0-45.49-generic 5.4.55
Uname: Linux 5.4.0-45-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
ApportVersion: 2.20.11-0ubuntu27.8
Architecture: amd64
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
Date: Fri Sep 4 20:50:10 2020
Dependencies:
EcryptfsInUse: Yes
InstallationDate: Installed on 2020-08-29 (7 days ago)
InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731)
PackageArchitecture: all
ProcEnviron:
TERM=xterm-256color
PATH=(custom, no user)
XDG_RUNTIME_DIR=
LANG=en_US.UTF-8
SHELL=/bin/bash
SourcePackage: bash-completion
UpgradeStatus: No upgrade log present (probably fresh install)
** Affects: bash-completion (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug focal
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1894352
Title:
bash-completion not working properly with directories with spaces in
them when using some commands
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash-completion/+bug/1894352/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894354] [NEW] Xubuntu has no OEM-Config slideshow
Public bug reported: During an OEM install test the Groovy Gorilla installer was observed to show the regular slideshow during the first half of the install. During the second half of the install the oem-config portion shows Ubuntu's slideshow instead to the end-user. This is an artwork conflict. ** Affects: xubuntu-artwork (Ubuntu) Importance: Undecided Status: New ** Tags: groovy usability -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894354 Title: Xubuntu has no OEM-Config slideshow To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xubuntu-artwork/+bug/1894354/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894351] Re: Artwork is not updated for Groovy Gorilla
This bug has been reported on the Ubuntu ISO testing tracker. A list of all reports related to this bug can be found here: http://iso.qa.ubuntu.com/qatracker/reports/bugs/1894351 ** Tags added: iso-testing -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894351 Title: Artwork is not updated for Groovy Gorilla To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xubuntu-artwork/+bug/1894351/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1855621] Re: Documentation refers to apt-offline which no longer ships in Focal Fossa
This bug has been reported on the Ubuntu ISO testing tracker. A list of all reports related to this bug can be found here: http://iso.qa.ubuntu.com/qatracker/reports/bugs/1855621 ** Tags added: iso-testing -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1855621 Title: Documentation refers to apt-offline which no longer ships in Focal Fossa To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xubuntu-docs/+bug/1855621/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893028] Re: /usr/share/glib-2.0/schemas/org.ayatana.indicator.datetime.gschema.xml:4:1 Error on line 4 char 1: already specified. This entire file has been ignored.
For the 'ayatana-indicator-datetime' package, the issue resolved (no more schema error as above) after removing 'indicator-datetime' package. Possible conflicts. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893028 Title: /usr/share/glib-2.0/schemas/org.ayatana.indicator.datetime.gschema.xml:4:1 Error on line 4 char 1: already specified. This entire file has been ignored. To manage notifications about this bug go to: https://bugs.launchpad.net/ayatana-indicator/+bug/1893028/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893244] Re: ayatana-indicator-datetime crash no clock visiable on panel
Issue resolved upon removing 'indicator-datetime' package. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893244 Title: ayatana-indicator-datetime crash no clock visiable on panel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ayatana-indicator-datetime/+bug/1893244/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
@Coiby Xu (coiby) ,
on my windows 10 ,
it report error!
Microsoft Windows [Version 10.0.19042.450]
(c) 2020 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>logman create trace -n HID_WPP -o
%SystemRoot%\Tracing\HID_WPP.etl -nb 128 640 -bs 128
Error:
Data Collector already exists.
C:\WINDOWS\system32>logman update trace -n HID_WPP -p
{E742C27D-29B1-4E4B-94EE-074D3AD72836} 0x7FFF 0xFF
The command completed successfully.
C:\WINDOWS\system32>logman start -n HID_WPP
Error:
The filename, directory name, or volume label syntax is incorrect.
C:\WINDOWS\system32>logman stop -n HID_WPP
Error:
Data Collector Set is not running.
C:\WINDOWS\system32>logman update trace -n HID_WPP -p
{47c779cd-4efd-49d7-9b10-9f16e5c25d06} 0x7FFF 0xFF
The command completed successfully.
C:\WINDOWS\system32>logman start -n HID_WPP
Error:
The filename, directory name, or volume label syntax is incorrect.
C:\WINDOWS\system32>logman update trace -n HID_WPP -p
{896f2806-9d0e-4d5f-aa25-7acdbf4eaf2c} 0x7FFF 0xFF
The command completed successfully.
C:\WINDOWS\system32>logman start -n HID_WPP
Error:
The filename, directory name, or volume label syntax is incorrect.
C:\WINDOWS\system32>logman update trace -n HID_WPP -p
{07699FF6-D2C0-4323-B927-2C53442ED29B} 0x7FFF 0xFF
The command completed successfully.
C:\WINDOWS\system32>logman start -n HID_WPP
Error:
The filename, directory name, or volume label syntax is incorrect.
C:\WINDOWS\system32>logman update trace -n HID_WPP -p
{0107cf95-313a-473e-9078-e73cd932f2fe} 0x7FFF 0xF
The command completed successfully.
C:\WINDOWS\system32>logman start -n HID_WPP
Error:
The filename, directory name, or volume label syntax is incorrect.
C:\WINDOWS\system32>logman stop -n HID_WPP
Error:
Data Collector Set is not running.
C:\WINDOWS\system32>
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1887190
Title:
MSFT Touchpad not working on Lenovo Legion-5 15ARH05
To manage notifications about this bug go to:
https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1752251] Re: Missing mcelog userspace package in bionic - or maybe linux kernel config should disable mcelog_legacy
** Tags added: groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1752251 Title: Missing mcelog userspace package in bionic - or maybe linux kernel config should disable mcelog_legacy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752251/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1872001] Re: 5.3.0-46-generic - i915 - frequent GPU hangs / resets rcs0
Confirming, only Blender is affected in my case. Kernel 5.4.0-42, Intel UHD Graphics 620 (rev 07). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1872001 Title: 5.3.0-46-generic - i915 - frequent GPU hangs / resets rcs0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1872001/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1853277] Re: Lenovo ThinkBook 14-IML Touchpad not showing up in /proc/bus/input/devices
Forgot to say please un-blacklist elan_i2c. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1853277 Title: Lenovo ThinkBook 14-IML Touchpad not showing up in /proc/bus/input/devices To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1853277/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1887826] Re: CURLFile POST missing Content-Length header
** Merge proposal linked: https://code.launchpad.net/~bryce/ubuntu/+source/php7.4/+git/php7.4/+merge/390343 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1887826 Title: CURLFile POST missing Content-Length header To manage notifications about this bug go to: https://bugs.launchpad.net/php/+bug/1887826/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894325] Re: [FFe] Fence Agents should be upgraded to v4.6.0 in Groovy
Bileto looks good: https://bileto.ubuntu.com/excuses/4245/groovy.html So waiting on release team for the FFe now. Thank you! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894325 Title: [FFe] Fence Agents should be upgraded to v4.6.0 in Groovy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fence-agents/+bug/1894325/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894351] [NEW] Artwork is not updated for Groovy Gorilla
Public bug reported: Upon testing the live session test case in Microsoft Hyper-V the wallpaper was observed to have not been updated since the 20.04 release. A fossa is still depicted. ** Affects: xubuntu-artwork (Ubuntu) Importance: Undecided Status: New ** Tags: groovy usability -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894351 Title: Artwork is not updated for Groovy Gorilla To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xubuntu-artwork/+bug/1894351/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884860] Re: How to set default applications has changed in Ubuntu 20
The proposal was merged, and will land in groovy once we upgrade to a new upstream release. ** Changed in: gnome-user-docs (Ubuntu) Status: Triaged => In Progress ** Changed in: gnome-user-docs (Ubuntu) Assignee: (unassigned) => Gunnar Hjalmarsson (gunnarhj) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884860 Title: How to set default applications has changed in Ubuntu 20 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-user-docs/+bug/1884860/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1880211] Re: Logwatch package points to wrong location for zfs utils
** Description changed:
+ [Impact]
+ Logwatch fails to print info for ZFS due to invalid paths to binaries.
+
+ [Test Case]
+ With ZFS installed, run logwatch and note the missing ZFS information.
+
+ [Regression Potential]
+ Since logwatch filters logs for errors pertinent to administrators,
+ standard things to watch out for are undesired changes in this filtering
+ behavior, such as flagging or failing to flag issues differently than
+ before, other than the specific messages being filtered with this
+ change.
+
+ [Discussion]
In /usr/share/logwatch/scripts/services/zz-zfs line 54 and 55 are the
following.
my $pathto_zpool = $ENV{'pathto_zpool'} || '/usr/sbin/zpool';
my $pathto_zfs = $ENV{'pathto_zfs'} || '/usr/sbin/zfs';
In Ubuntu, the zfs utilities are in /sbin, not /usr/sbin. This causes
logwatch to not print info for ZFS even if you're using it.
The fix is just to point to /sbin instead. This is what fixed it for me.
my $pathto_zpool = $ENV{'pathto_zpool'} || '/sbin/zpool';
my $pathto_zfs = $ENV{'pathto_zfs'} || '/sbin/zfs';
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1880211
Title:
Logwatch package points to wrong location for zfs utils
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1880211/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894290] Re: 'dieharder' autopkgtest is a pointless multi-hour test
This bug was fixed in the package haveged - 1.9.8-4ubuntu2 --- haveged (1.9.8-4ubuntu2) groovy; urgency=medium * d/t/control, d/t/dieharder, d/t/run-tests: - Remove dieharder test, as it takes hours (12+ on armhf) and doesn't really "test" any part of haveged - Add autopkgtest to just run make check - LP: #1894290 -- Dan Streetman Fri, 04 Sep 2020 12:44:43 -0400 ** Changed in: haveged (Ubuntu Groovy) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894290 Title: 'dieharder' autopkgtest is a pointless multi-hour test To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/haveged/+bug/1894290/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894347] Re: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell
** Description changed: + Try to remove just "ubuntu-wallpapers" in Synaptic. + It will mark for removal "gnome-shell", "ubuntu-desktop", "ubuntu-artwork" and 3 other packages. + It should remove only "ubuntu-wallpapers" and "ubuntu-wallpapers-bionic". + + Experiments with "depends" have to stop now! I don't want to remove gnome-shell just because of wallpapers! - Who made this change? Fire him!!! - --- + + + --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.17 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DisplayManager: gdm3 DistroRelease: Ubuntu 18.04 EcryptfsInUse: Yes GsettingsChanges: - b'org.gnome.shell' b'enabled-extensions' b"['disable-force-q...@kingodz.gmail.com', 'temperature@xtranophilist', 'freon@UshakovVasilii_Github.yahoo.com', 'systemmoni...@gnome-shell-extensions.gcampax.github.com']" - b'org.gnome.shell' b'command-history' redacted by apport - b'org.gnome.shell' b'favorite-apps' redacted by apport - b'org.gnome.desktop.interface' b'toolkit-accessibility' b'true' - b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" + b'org.gnome.shell' b'enabled-extensions' b"['disable-force-q...@kingodz.gmail.com', 'temperature@xtranophilist', 'freon@UshakovVasilii_Github.yahoo.com', 'systemmoni...@gnome-shell-extensions.gcampax.github.com']" + b'org.gnome.shell' b'command-history' redacted by apport + b'org.gnome.shell' b'favorite-apps' redacted by apport + b'org.gnome.desktop.interface' b'toolkit-accessibility' b'true' + b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" InstallationDate: Installed on 2016-06-30 (1527 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) Package: ubuntu-wallpapers PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 4.15.0-115.116-generic 4.15.18 Tags: third-party-packages bionic Uname: Linux 4.15.0-115-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip docker lpadmin plugdev sambashare sudo _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894347 Title: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1894347/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894347] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1894347/+attachment/5407778/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894347 Title: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1894347/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894347] Re: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell
apport information ** Tags added: apport-collected bionic third-party-packages ** Description changed: Experiments with "depends" have to stop now! I don't want to remove gnome-shell just because of wallpapers! Who made this change? Fire him!!! + --- + ProblemType: Bug + ApportVersion: 2.20.9-0ubuntu7.17 + Architecture: amd64 + CurrentDesktop: ubuntu:GNOME + DisplayManager: gdm3 + DistroRelease: Ubuntu 18.04 + EcryptfsInUse: Yes + GsettingsChanges: + b'org.gnome.shell' b'enabled-extensions' b"['disable-force-q...@kingodz.gmail.com', 'temperature@xtranophilist', 'freon@UshakovVasilii_Github.yahoo.com', 'systemmoni...@gnome-shell-extensions.gcampax.github.com']" + b'org.gnome.shell' b'command-history' redacted by apport + b'org.gnome.shell' b'favorite-apps' redacted by apport + b'org.gnome.desktop.interface' b'toolkit-accessibility' b'true' + b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" + InstallationDate: Installed on 2016-06-30 (1527 days ago) + InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) + Package: ubuntu-wallpapers + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 4.15.0-115.116-generic 4.15.18 + Tags: third-party-packages bionic + Uname: Linux 4.15.0-115-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip docker lpadmin plugdev sambashare sudo + _MarkForUpload: True ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1894347/+attachment/540/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894347 Title: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1894347/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894347] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1894347/+attachment/5407779/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894347 Title: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1894347/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894347] Re: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please execute the following command only once, as it will automatically gather debugging information, in a terminal: apport-collect 1894347 When reporting bugs in the future please use apport by using 'ubuntu- bug' and the name of the package affected. You can learn more about this functionality at https://wiki.ubuntu.com/ReportingBugs. FYI: There are reasons for the *depends* rules, and the bug report is written like you're just trolling, so currently it's likely to get closed. You may find it helpful to read "How to report bugs effectively" http://www.chiark.greenend.org.uk/~sgtatham/bugs.html. We'd be grateful if you would then provide a more complete description of the problem. We have instructions on debugging some types of problems at http://wiki.ubuntu.com/DebuggingProcedures. At a minimum, we need: 1. The specific steps or actions you took that caused you to encounter the problem. 2. The behavior you expected. 3. The behavior you actually encountered (in as much detail as possible). Please also ensure that you include the release and flavour of Ubuntu that you are using. Thank you! ** Changed in: gnome-shell (Ubuntu) Status: New => Incomplete ** Changed in: ubuntu-wallpapers (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894347 Title: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1894347/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894343] Re: libzypp1702: Depends on cruft package libsolv0
** Changed in: libzypp (Debian) Importance: Undecided => Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894343 Title: libzypp1702: Depends on cruft package libsolv0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libzypp/+bug/1894343/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894342] Re: crystal build depends on library packages
** Changed in: crystal (Debian) Importance: Undecided => Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894342 Title: crystal build depends on library packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/crystal/+bug/1894342/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1887187] Re: [MIR] nftables
(subscribing ubuntu-mir even though this isn't done yet, just in case that was overlooked :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1887187 Title: [MIR] nftables To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nftables/+bug/1887187/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893906] Re: smbclient ignores included config files
Ok, after a few starting hiccups, I managed to get our management system to support groovy and install a VM. I have only tested the behaviour of the workgroup setting with smbclient -L localhost since it does not rely on any external servers etc. I can confirm that the behaviour is unchanged in groovy (samba version 2:4.12.5+dfsg-3ubuntu3). I.e. the workgroup setting is ignored in the included file but works in the top-level. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893906 Title: smbclient ignores included config files To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1893906/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1892714] Re: Microphone not working on HP Omen 17
Indeed it got overwritten on the update! My "5.4.0-42-generic" also started to freeze. Because before (and now again after the update) the "sof-cfl.ri" was just a symbolic link to "sof-cnl.ri" which is a symbolic link to "signed/sof-cnl-signed-intel.ri". I put the new "sof-cfl.ri" now and "5.4.0-45-generic" is not freezing. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1892714 Title: Microphone not working on HP Omen 17 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1892714/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894341] Re: Ubuntu Installer language selector for Persian is horribly displayed
Neither plymouth nor ubiquity are involved in the F2 display of language names. Reassigning to gfxboot-theme-ubuntu. Note that in groovy and beyond, we also no longer use isolinux / gfxboot; so this is a non-issue there. ** Package changed: plymouth (Ubuntu) => gfxboot-theme-ubuntu (Ubuntu) ** Changed in: ubiquity (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894341 Title: Ubuntu Installer language selector for Persian is horribly displayed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gfxboot-theme-ubuntu/+bug/1894341/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894348] [NEW] package wine 5.0-3ubuntu1 failed to install/upgrade: installed wine package pre-removal script subprocess returned error exit status 2
Public bug reported: attempting to remove wine ProblemType: Package DistroRelease: Ubuntu 20.04 Package: wine 5.0-3ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-45.49-generic 5.4.55 Uname: Linux 5.4.0-45-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.4 AptOrdering: winetricks:amd64: Remove wine:amd64: Remove NULL: ConfigurePending Architecture: amd64 CasperMD5CheckResult: skip Date: Fri Sep 4 17:40:05 2020 ErrorMessage: installed wine package pre-removal script subprocess returned error exit status 2 InstallationDate: Installed on 2020-09-03 (1 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) PackageArchitecture: all Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: wine Title: package wine 5.0-3ubuntu1 failed to install/upgrade: installed wine package pre-removal script subprocess returned error exit status 2 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: wine (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894348 Title: package wine 5.0-3ubuntu1 failed to install/upgrade: installed wine package pre-removal script subprocess returned error exit status 2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wine/+bug/1894348/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894347] [NEW] Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell
Public bug reported: Experiments with "depends" have to stop now! I don't want to remove gnome-shell just because of wallpapers! Who made this change? Fire him!!! ** Affects: gnome-shell (Ubuntu) Importance: Undecided Status: New ** Affects: ubuntu-wallpapers (Ubuntu) Importance: Undecided Status: New ** Tags: packaging ** Also affects: gnome-shell (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894347 Title: Can't uninstall ubuntu-wallpapers and ubuntu-wallpapers-bionic without gnome-shell To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1894347/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860592] Re: Test t/06190 hangs on arm64
Comment #5 indicates that 4096M of memory was used for test and I wonder how much memory was used in the test on scaleway mentioned in comment #7. The Ubuntu autopkgtest infrastructure by default runs on systems with 2G of memory. I ran this on a m1.large system (8G of memory) and the test passed so I've added gscan2pdf to "big_packages" on arm64. https://git.launchpad.net/autopkgtest-cloud/commit/worker-config- production?id=73c749d95286c0f3394b87aed8e507b5022404ee Once this is deployed the tests should be retried and I suspect they will pass. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860592 Title: Test t/06190 hangs on arm64 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gscan2pdf/+bug/1860592/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
And for those who have the Synaptics touchpad, I've found a way to make
the touchpad almost work. You can apply the following patch which will
make kernel use hid-rmi handle the device without blacklisting hid-
mulitouch,
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index a8e3b2796be8..9984e31c8914 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1102,6 +1102,7 @@
#define I2C_VENDOR_ID_SYNAPTICS 0x06cb
#define I2C_PRODUCT_ID_SYNAPTICS_SYNA2393 0x7a13
+#define I2C_PRODUCT_ID_SYNAPTICS_SYNA7f28 0x7f28
#define USB_VENDOR_ID_SYNAPTICS0x06cb
#define USB_DEVICE_ID_SYNAPTICS_TP 0x0001
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index a65aef6a322f..a11366f6ccd8 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -568,6 +568,7 @@ static const struct hid_device_id hid_have_special_driver[]
= {
{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_REZEL) },
+ { HID_I2C_DEVICE(I2C_VENDOR_ID_SYNAPTICS,
I2C_PRODUCT_ID_SYNAPTICS_SYNA7f28) },
#endif
#if IS_ENABLED(CONFIG_HID_ROCCAT)
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) },
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 7f41213d5ae3..e74b54f1b0c4 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -759,6 +759,7 @@ static const struct hid_device_id rmi_id[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_REZEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS,
USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5),
.driver_data = RMI_DEVICE_OUTPUT_SET_REPORT },
+ { HID_I2C_DEVICE(I2C_VENDOR_ID_SYNAPTICS,
I2C_PRODUCT_ID_SYNAPTICS_SYNA7f28) },
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) },
{ }
};
One left issue is the single clicking is not sensitive enough. I need to
let my finger linger on the touchpad for a while (like 0.5s). I'll send
the patches upstream after fixing this issue.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1887190
Title:
MSFT Touchpad not working on Lenovo Legion-5 15ARH05
To manage notifications about this bug go to:
https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894346] [NEW] Livepatch should not be reported as available in a Docker container
Public bug reported: A Docker container, like an LXD container (bug 1759257), cannot load kernel modules, so it should not report Canonical Livepatch as being available in the motd. $ docker run --rm -it ubuntu:18.04 root@12d1934cc2df:/# apt-get update root@12d1934cc2df:/# apt-get install lsb-release ubuntu-advantage-tools root@12d1934cc2df:/# /etc/cron.daily/ubuntu-advantage-tools root@12d1934cc2df:/# /etc/update-motd.d/80-livepatch * Canonical Livepatch is available for installation. - Reduce system reboots and improve kernel security. Activate at: https://ubuntu.com/livepatch root@12d1934cc2df:/# exit $ docker run --rm -it ubuntu:20.04 root@b9959e2f6ae9:/# apt-get update root@b9959e2f6ae9:/# apt-get install ca-certificates ubuntu-advantage-tools root@b9959e2f6ae9:/# ubuntu-advantage status SERVICE AVAILABLE DESCRIPTION cc-ealno Common Criteria EAL2 Provisioning Packages esm-apps yesUA Apps: Extended Security Maintenance esm-infra yesUA Infra: Extended Security Maintenance fips no NIST-certified FIPS modules fips-updates no Uncertified security updates to FIPS modules livepatch yesCanonical Livepatch service This machine is not attached to a UA subscription. See https://ubuntu.com/advantage ** Affects: ubuntu-advantage-tools (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894346 Title: Livepatch should not be reported as available in a Docker container To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-advantage-tools/+bug/1894346/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
Hi Stefano Galassi (iltoga) and wangjun (biggerchina) Thank you for providing the info! So this ELAN touchpad's HID reporter descriptors could be read and parsed but it couldn't be started at all since no HID reports are received. Now the only way I can think of to tackle this issue is to install Windows Driver Kit to capture HID reports to see what reports are sent/received from/by the Windows driver while playing with the touchpad under Windows? But my laptop comes with the Synnaptics touchpad, I couldn't do this on my own computer. Is it possible for you to do it for me? Here's the how-to https://techcommunity.microsoft.com/t5/microsoft-usb-blog/how-to-capture-and-read-hid-traces-in-windows-8-1/ba-p/270839. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 To manage notifications about this bug go to: https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1890751] Re: unmatched entry for securetty on focal
** Merge proposal linked: https://code.launchpad.net/~bryce/ubuntu/+source/logwatch/+git/logwatch/+merge/390212 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1890751 Title: unmatched entry for securetty on focal To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1890751/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1890749] Re: Missing perl 'Sys' module in system config summary on focal
** Merge proposal linked: https://code.launchpad.net/~bryce/ubuntu/+source/logwatch/+git/logwatch/+merge/390212 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1890749 Title: Missing perl 'Sys' module in system config summary on focal To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1890749/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1829568] Re: [GL703VD, Realtek ALC295, Black Headphone left and right ] No sound at all
The same issue on ASUS GL703GE, headphones doesn't work. It was working some how on Ubuntu 18.04. Now I have installed Ubuntu 20 and this headache back again. Anybody, please help. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1829568 Title: [GL703VD, Realtek ALC295, Black Headphone left and right ] No sound at all To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1829568/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1892879] Re: python-ubuntutools package is empty.
I think @mwhudson's upload in the bionic queue for bug 1887638 addresses this? https://launchpadlibrarian.net/489460611/ubuntu-dev-tools_0.175~18.04.2_source.changes http://launchpadlibrarian.net/489460619/ubuntu-dev- tools_0.175~18.04.1_0.175~18.04.2.diff.gz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1892879 Title: python-ubuntutools package is empty. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-dev-tools/+bug/1892879/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894290] Re: 'dieharder' autopkgtest is a pointless multi-hour test
** Description changed: [impact] the 'dieharder' test eats entropy from haveged for hours, and hours, and hours. On armhf it takes over 12 hours and fails the test because it times out. There is no point to running this test to verify haveged is able to provide entropy. - - Instead just check entropy_avail to make sure haveged is providing some - entropy. [test case] run haveged autopkgtest, especially on armhf, e.g.: https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-groovy/groovy/armhf/h/haveged/20200901_232740_e112e@/log.gz [regression potential] - this just tests a different way, so any regression would likely involve - incorrectly failed (or passed) autopkgtest. + this change just runs the haveged build tests, so any regression would + likely involve incorrectly failed (or passed) autopkgtest. [scope] this is needed on b/f/g; there are no autopkgtests for haveged on x. I don't think debian has the same test hardware, so they likely only test on arm64, which takes a few hours, but passes, so this is only - required in debian to reduce ubuntu delta. + required in debian to reduce ubuntu delta. However the 'dieharder' test + is just as pointless on debian. ** Tags added: block-proposed-bionic block-proposed-focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894290 Title: 'dieharder' autopkgtest is a pointless multi-hour test To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/haveged/+bug/1894290/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893906] Re: smbclient ignores included config files
@Paride: Good catch. The second file's contents are: # Global ttde samba config. Do not edit. [global] workgroup = TEL include=/etc/samba/dhcp.conf encrypt passwords = true # ICT don't like us to rebroadcast printers all over the shop load printers=no show add printer wizard=no disable spools=yes client min protocol = NT1 [Home] comment = /home on %h path = /home writeable = yes However, connecting with smbclient -L localhost asks for WORKGROUP\seb's password not TEL\seb's. So it's definitely not just the client min protocol. However, the above command *does* list the home share. So its also not the entire file that is being ignored. I'd also like to point out that I'm not sure this is a new issue! I only noticed it when I tried to put in the client min protocol which is needed since 20.04. @Christian: I'll try, but that will take a moment longer since I have not yet set our management system up for Groovy since we typically stay with the LTSs and I haven't even managed to get us onto 20.04. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893906 Title: smbclient ignores included config files To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1893906/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1493188] Re: "overlayfs" no longer exists
Proposed branch is up for xenial handling overlayfs issues. https://code.launchpad.net/~chad.smith/ubuntu/+source/cloud-utils/+git /cloud-utils/+ref/upload-xenial-handle-missing-overlayfs The review has been approved and a test ppa is setup with cloud-utils version 0.27-0ubuntu25.2 on Xenial which should resolve this issue. If there is an opportunity to this this to confirm the fix, that would be great: Verification procedure: sudo add-apt-repository ppa:chad.smith/cloud-utils-uploads -y sudo apt-get update sudo apt-get install cloud-utils=0.27-0ubuntu25.2 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1493188 Title: "overlayfs" no longer exists To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-initramfs-tools/+bug/1493188/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894341] Re: Ubuntu Installer language selector for Persian is horribly displayed
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ubiquity (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894341 Title: Ubuntu Installer language selector for Persian is horribly displayed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1894341/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894341] Re: Ubuntu Installer language selector for Persian is horribly displayed
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: plymouth (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894341 Title: Ubuntu Installer language selector for Persian is horribly displayed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1894341/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1891473] Re: cryptsetup ftbfs in focal
After some investigation, seems we were able to narrow down the issue.
* tl;dr: After the upgrade of the PPA builder to Bionic, the memlock limit
(ulimit -l) was bumped from a ridiculous low value (64) to something bigger
(16M). Happens that cryptsetup then succeeded in its call to mlockall(), so all
allocations got restricted by such limit, which is still a bit low and it ends
up leading to allocation failures.
When the limit is very low (like in Xenial), the lock procedure fails, and
cryptsetup allocations are not subject to this restriction, so everything just
works.
See section "Conclusion" for alternatives on how to fix this
* Details:
I manage to reproduce that by collecting the luks2-validation images in a local
environment, running a Bionic VM + LXD (a Focal container). By collecting the
strace of luksDump in both environments, we got the following:
### LXD - NOT working
...
openat(AT_FDCWD, "./luks2-metadata-size-4m.img", O_RDONLY|O_DIRECT) = 5
fstat(5, {st_mode=S_IFREG|0644, st_size=16777216, ...}) = 0
fstat(6, {st_mode=S_IFREG|0644, st_size=16777216, ...}) = 0
lseek(5, 0, SEEK_SET) = 0
read(5, "LUKS\272\276\0\2\0\0\0\0\0@\0\0\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\0"...,
4096) = 4096
mmap(NULL, 4194304, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
-1 EAGAIN (Resource temporarily unavailable)
brk(0x55e789c38000) = 0x55e78982d000
mmap(NULL, 4325376, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
-1 EAGAIN (Resource temporarily unavailable)
lseek(5, 16384, SEEK_SET) = 16384
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4096) = 4096
lseek(5, 32768, SEEK_SET) = 32768
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4096) = 4096
lseek(5, 65536, SEEK_SET) = 65536
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4096) = 4096
...
### VM - working
...
openat(AT_FDCWD, "./luks2-metadata-size-4m.img", O_RDONLY|O_DIRECT) = 5
fstat(5, {st_mode=S_IFREG|0644, st_size=16777216, ...}) = 0
fstat(6, {st_mode=S_IFREG|0644, st_size=16777216, ...}) = 0
lseek(5, 0, SEEK_SET) = 0
read(5, "LUKS\272\276\0\2\0\0\0\0\0@\0\0\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\0"...,
4096) = 4096
mmap(NULL, 4194304, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x7f6b06031000
lseek(5, 4096, SEEK_SET)= 4096
mmap(NULL, 4198400, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x7f6b05c3
So: as mmap fails, lseeks start to be attempted with wrong sizes, 2K^N,
where N=4,5,...
In cryptsetup code: on luks2_disk_metadata.c, function
LUKS2_disk_hdr_read(), we fail and try all known offsets, as per the
below code:
[...]
* No header size, check all known offsets.
*/
for (r = -EINVAL,i = 0; r < 0 && i < ARRAY_SIZE(hdr2_offsets);
i++)
[...]
This explains why we see that many lseeks in the LXD failing case, with
multiple offsets.
But then, why we fail? In the failing case, on funtion
LUKS2_disk_hdr_read(), we fail right in the first header read, as per
code in lib/luks2/luks2_disk_metadata.c:
[...]
* Read primary LUKS2 header (offset 0).
*/
state_hdr1 = HDR_FAIL;
r = hdr_read_disk(cd, device, _disk1, _area1, 0, 0);
[...]
The failure comes in a malloc(), specifically in hdr_read_disk():
[...]
r = hdr_disk_sanity_check_pre(cd, hdr_disk, _json_size, secondary,
offset);
if (r < 0) {
return r;
}
/*
* Allocate and read JSON area. Always the whole area must be read.
*/
*json_area = malloc(hdr_json_size);
if (!*json_area) {
return -ENOMEM;
}
[...]
Without the json_area allocated we end-up looping, in search of the
proper header size, and failing the test. This malloc is the one
generating the following entry on strace:
mmap(NULL, 4194304, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = -1 EAGAIN (Resource temporarily unavailable)
* Conclusion: we have 2 avenues for fixing that, I personally consider (a)
[below] the more correct one.
(a) We could increase the builders memlock limit to 64M - Focal has that
as a default now. This seems to me the proper approach, given that in
real life cryptsetup is performing the memory lock, so we should
exercise it like that during the build tests.
(b) It's possible to fallback to the same scenario of Xenial builder by
_reducing_ the memlock limit and having cryptsetup not setting the
memory lock at all during the build. The bonus of this approach is its
simplicity - we can decrease such limit from the package itself, but at
the same time, we don't exercise the real life usage anymore during the
build tests.
By following the approach (b) above, I've managed to make the build
work: https://launchpad.net/~gpiccoli/+archive/ubuntu/crypt-
groovy/+build/19913720
I'll
[Bug 1891473] Re: cryptsetup ftbfs in focal
** Changed in: cryptsetup (Ubuntu Focal) Status: Confirmed => In Progress ** Changed in: cryptsetup (Ubuntu Groovy) Status: Confirmed => In Progress ** Changed in: cryptsetup (Ubuntu Focal) Assignee: (unassigned) => Guilherme G. Piccoli (gpiccoli) ** Changed in: cryptsetup (Ubuntu Groovy) Assignee: (unassigned) => Guilherme G. Piccoli (gpiccoli) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1891473 Title: cryptsetup ftbfs in focal To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1891473/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1892275] Re: [sync][sru] sos upstream 4.0
Test report:
- Tested collection of logs, all looks OK.
- Tested obfuscation, extracted obfuscated sosreport and checked *some* of the
obfuscated files, all looks OK.
- I obfuscated the original sosreport again, this time I provided a keyword
(--keyword ubuntu) to obfuscate and did it OK. It added the word 'ubuntu' to
the mapfile:
"keyword_map": {
"ubuntu": "obfuscatedword0"
}
Possible issues:
1) On the 2nd obfuscated sosreport, I still noticed 'ubuntu' in some files:
- installed-debs
- sos_commands/dpkg/dpkg_-l
- sos_commands/snappy/snap_--version
I realize this was a trick word and not a real-world example, but wanted
to point it out.
2) I started from scratch, I created a new report, obfuscated it again,
this time I did NOT pass any keywords, but it still obfuscated the word
'ubuntu' (and reported it in the mapfile). Is there a cache or something
I need to clean up from the previous run? If so, probably needs to be
documented.
Jose
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1892275
Title:
[sync][sru] sos upstream 4.0
To manage notifications about this bug go to:
https://bugs.launchpad.net/sosreport/+bug/1892275/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894341] Re: Ubuntu Installer language selector for Persian is horribly displayed
I can not do much for the Language name in list. But I recently fixed Persian texts in options (After selecting فارسی). I don't know if it has been fixed to downstream yet or not. ** Also affects: plymouth (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894341 Title: Ubuntu Installer language selector for Persian is horribly displayed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1894341/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894343] [NEW] libzypp1702: Depends on cruft package libsolv0
Public bug reported: Imported from Debian bug http://bugs.debian.org/960619: Package: libzypp1702 Version: 17.7.0-1+b1 Severity: serious The current build of libzypp1702 (17.7.0-1+b1 on amd64) Depends on libsolv0, while the current version of src:libsolv builds only libsolv1. This also cannot be resolved with a new binNMU: src:libzypp Build-Depends on libsolv0-dev, while the current version of src:libsolv builds only libsolv1-dev. -- Daniel Schepler ** Affects: libzypp (Ubuntu) Importance: Undecided Status: New ** Affects: libzypp (Debian) Importance: Undecided Status: New ** Tags: update-excuse ** Bug watch added: Debian Bug tracker #960619 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=960619 ** Changed in: libzypp (Debian) Remote watch: None => Debian Bug tracker #960619 ** Tags added: update-excuse -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894343 Title: libzypp1702: Depends on cruft package libsolv0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libzypp/+bug/1894343/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1823200] Related fix proposed to cinder (stable/stein)
Related fix proposed to branch: stable/stein Review: https://review.opendev.org/750052 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1823200 Title: Improper handling of ScaleIO backend credentials To manage notifications about this bug go to: https://bugs.launchpad.net/cinder/+bug/1823200/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894342] [NEW] crystal build depends on library packages
Public bug reported: Imported from Debian bug http://bugs.debian.org/966014: Source: crystal Version: 0.34.0+dfsg-1 Severity: serious Tags: ftbfs crystal build depends on the library packages libgc1c2 and libgmpxx4ldbl. This is wrong, and also the root cause of https://buildd.debian.org/status/package.php?p=crystal The correct library packages are arready being installed by the dependencies on the corresponding -dev packages. ** Affects: crystal (Ubuntu) Importance: Undecided Status: New ** Affects: crystal (Debian) Importance: Undecided Status: New ** Tags: update-excuse ** Bug watch added: Debian Bug tracker #966014 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=966014 ** Changed in: crystal (Debian) Remote watch: None => Debian Bug tracker #966014 ** Tags added: update-excuse -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894342 Title: crystal build depends on library packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/crystal/+bug/1894342/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1823200] Related fix proposed to cinder (stable/ussuri)
Related fix proposed to branch: stable/ussuri Review: https://review.opendev.org/750050 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1823200 Title: Improper handling of ScaleIO backend credentials To manage notifications about this bug go to: https://bugs.launchpad.net/cinder/+bug/1823200/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1823200] Related fix proposed to cinder (stable/train)
Related fix proposed to branch: stable/train Review: https://review.opendev.org/750051 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1823200 Title: Improper handling of ScaleIO backend credentials To manage notifications about this bug go to: https://bugs.launchpad.net/cinder/+bug/1823200/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1880211] Re: Logwatch package points to wrong location for zfs utils
** Merge proposal linked: https://code.launchpad.net/~bryce/ubuntu/+source/logwatch/+git/logwatch/+merge/390214 ** Merge proposal linked: https://code.launchpad.net/~bryce/ubuntu/+source/logwatch/+git/logwatch/+merge/390213 ** Merge proposal linked: https://code.launchpad.net/~bryce/ubuntu/+source/logwatch/+git/logwatch/+merge/390212 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1880211 Title: Logwatch package points to wrong location for zfs utils To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1880211/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1644057] Re: Excessive Disconnect unmatched entries from sshd
** Merge proposal linked: https://code.launchpad.net/~bryce/ubuntu/+source/logwatch/+git/logwatch/+merge/390214 ** Merge proposal linked: https://code.launchpad.net/~bryce/ubuntu/+source/logwatch/+git/logwatch/+merge/390213 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1644057 Title: Excessive Disconnect unmatched entries from sshd To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1644057/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1890751] Re: unmatched entry for securetty on focal
** Merge proposal unlinked: https://code.launchpad.net/~bryce/ubuntu/+source/logwatch/+git/logwatch/+merge/390212 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1890751 Title: unmatched entry for securetty on focal To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1890751/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1877176] Autopkgtest regression report (systemd/229-4ubuntu21.29)
All autopkgtests for the newly accepted systemd (229-4ubuntu21.29) for xenial have finished running. The following regressions have been reported in tests triggered by the package: systemd/229-4ubuntu21.29 (i386, amd64) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/xenial/update_excuses.html#systemd [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1877176 Title: 64-char hostname causes dhcp server to reject lease To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1877176/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894341] [NEW] Ubuntu Installer language selector for Persian is horribly displayed
Public bug reported: After booting Ubuntu Desktop installer, if you press F2 to select another language for the installer, the text for Persian language is displayed entirely wrong (see the attached screenshot). This is most probably since the bootloader (maybe ISOLINUX?) could not show bidi-rtl- text properly. Other bidi-rtl languages avoided this issue simply by showing the language name in Latin alphabet at this stage (e.g. Arabic). Persian speaking users would either miss that option, or will avoid selecting it since they assume that the entire Persian translations would be broken. I suggest that string to be changed to `Persian` or `Farsi` for the time. ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Attachment added: "Installer Screenshot - Wrong text highlighted" https://bugs.launchpad.net/bugs/1894341/+attachment/5407767/+files/photo_2020-09-05_01-37-12.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894341 Title: Ubuntu Installer language selector for Persian is horribly displayed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1894341/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876018] Autopkgtest regression report (systemd/229-4ubuntu21.29)
All autopkgtests for the newly accepted systemd (229-4ubuntu21.29) for xenial have finished running. The following regressions have been reported in tests triggered by the package: systemd/229-4ubuntu21.29 (i386, amd64) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/xenial/update_excuses.html#systemd [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876018 Title: 40-vm-hotadd.rules attempts to set non-existent sysfs parameters To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1876018/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1698388] Autopkgtest regression report (systemd/229-4ubuntu21.29)
All autopkgtests for the newly accepted systemd (229-4ubuntu21.29) for xenial have finished running. The following regressions have been reported in tests triggered by the package: systemd/229-4ubuntu21.29 (i386, amd64) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/xenial/update_excuses.html#systemd [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1698388 Title: Assertion failure in journal-remote-parse.c To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1698388/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1881312] Autopkgtest regression report (systemd/229-4ubuntu21.29)
All autopkgtests for the newly accepted systemd (229-4ubuntu21.29) for xenial have finished running. The following regressions have been reported in tests triggered by the package: systemd/229-4ubuntu21.29 (i386, amd64) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/xenial/update_excuses.html#systemd [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1881312 Title: systemd-run does not make the new scope unit part of the slice specified via the --slice arg To manage notifications about this bug go to: https://bugs.launchpad.net/systemd/+bug/1881312/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894340] [NEW] Use correct netbios name when leaving a domain joined with net ads
Public bug reported: WHen a domain was joined using samba as the join software (i.e., net ads join was used), and a custom computer name was specified, then this same name should be used when leaving the domain with the -r option, to remove the computer. Otherwise the "net ads leave" command will try to use the hostname and won't find it in AD: # joining with a custom name of GG, whereas hostname is g-adclient1: root@g-adclient1:~# realm -v join ad1.example.com --client-software=winbind --computer-name=GG * Resolving: _ldap._tcp.ad1.example.com * Performing LDAP DSE lookup on: 10.51.0.5 * Successfully discovered: ad1.example.com * Unconditionally checking packages * Resolving required packages * Joining using a manual netbios name: GG * LANG=C LOGNAME=root KRB5CCNAME=/var/cache/realmd/realm-ad-kerberos-8GVPQ0 /usr/bin/net -s /var/cache/realmd/realmd-smb-conf.6BYEQ0 -k ads join ad1.example.com DNS update failed: NT_STATUS_INVALID_PARAMETER Using short domain name -- AD1 Joined 'GG' to dns domain 'ad1.example.com' No DNS domain configured for gg. Unable to perform DNS Update. * LANG=C LOGNAME=root KRB5CCNAME=/var/cache/realmd/realm-ad-kerberos-8GVPQ0 /usr/bin/net -s /var/cache/realmd/realmd-smb-conf.6BYEQ0 -k ads keytab create * /usr/sbin/update-rc.d winbind enable * /usr/sbin/service winbind restart * Successfully enrolled machine in realm Computer entry created with the name GG: root@g-adclient1:~# ldapsearch '(|(cn=GG)(cn=G-ADCLIENT1))' dn dn: CN=GG,CN=Computers,DC=ad1,DC=example,DC=com Leaving fails to find the computer, as it looks for g-adclient1: root@g-adclient1:~# realm -v leave ad1.example.com --client-software=winbind -r Password for Administrator: * LANG=C LOGNAME=root /usr/bin/net -s /var/cache/realmd/realmd-smb-conf.JRDKQ0 -U Administrator ads leave Enter Administrator's password:Host account for g-adclient1 does not exist.
[Bug 1876600] Autopkgtest regression report (systemd/229-4ubuntu21.29)
All autopkgtests for the newly accepted systemd (229-4ubuntu21.29) for xenial have finished running. The following regressions have been reported in tests triggered by the package: systemd/229-4ubuntu21.29 (i386, amd64) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/xenial/update_excuses.html#systemd [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876600 Title: cookie overruns can cause org.freedesktop.systemd1 dbus to hang To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1876600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1892440] Re: Shell text is too small in mutter 3.36.4-0ubuntu0.20.04.2
I have AMD graphics, and I'm affected by this too. Ubuntu 20.04.1 LTS AMD Ryzen 5 3500U Radeon Vega 8 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1892440 Title: Shell text is too small in mutter 3.36.4-0ubuntu0.20.04.2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1892440/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1826233] Re: package plymouth 0.9.2-3ubuntu13.5 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: plymouth (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1826233 Title: package plymouth 0.9.2-3ubuntu13.5 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1826233/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1761096] Re: dnsmasq starts with error on Ubuntu Xenial amd64 when squid installed
** Merge proposal linked: https://code.launchpad.net/~sergiodj/ubuntu/+source/squid3/+git/squid3/+merge/390333 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1761096 Title: dnsmasq starts with error on Ubuntu Xenial amd64 when squid installed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1761096/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1761096] Re: dnsmasq starts with error on Ubuntu Xenial amd64 when squid installed
I'm marking the dnsmasq bug as Invalid since this is a problem with squid/systemd. ** Changed in: squid (Ubuntu Xenial) Assignee: (unassigned) => Sergio Durigan Junior (sergiodj) ** Changed in: dnsmasq (Ubuntu Xenial) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1761096 Title: dnsmasq starts with error on Ubuntu Xenial amd64 when squid installed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1761096/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1761096] Re: dnsmasq starts with error on Ubuntu Xenial amd64 when squid installed
** Description changed: + [Impact] + + When using dnsmasq along with squid on Ubuntu Xenial, the user will + experience a deadlock while performing on every second execution of the + "systemctl start dnsmasq.service" command. The deadlock will be caused + by an attempt to invoke, by nss-lookup.target, a "systemctl reload + squid.service", which will itself try to start the nss-lookup.target, + which will be waiting on squid, therefore eventually leading to a + timeout. + + The underlying cause of this deadlock is related to how systemd used to + handle dependencies between multiple jobs being started in the same + transaction. + + [Test Case] + + One can reproduce the issue on a Xenial container: + + $ lxc launch ubuntu-daily:xenial squid-bug1761096 + $ lxc shell squid-bug1761096 + # apt update + # apt install squid dnsmasq -y + + It is quite possible that during "apt install" the bug will manifest, + and dnsmasq will fail to start due to a timeout. The user might see a + message like: + + Job for dnsmasq.service failed because a timeout was exceeded. See + "systemctl status dnsmasq.service" and "journalctl -xe" for details. + + If the bug doesn't manifest itself during installation, the following + commands in sequence should trigger it: + + # systemctl restart dnsmasq.service + # systemctl restart dnsmasq.service + + [Regression Potential] + + This change only touches the mechanism by which squid has its + configuration reloaded in case of a DNS resolver change. Because + "systemctl reload --no-block" returns practically immediately, if + squid's configuration file is invalid the user won't see any + notifications. However, this behaviour is already present currently, + because "systemctl reload squid" invokes "/etc/init.d/squid reload"; the + user has to check "journalctl -u squid.service" if she wants to verify + whether there were any failures during the reload. + + Other than that, and because systemctl will offload the service to the + SysV script as usual (in the case of squid), I don't foresee any + potential regressions. + + [Original Description] + Setup to reproduce: Ubuntu Xenial amd64 net install iso from http://archive.ubuntu.com/ubuntu/dists/xenial/main/installer- amd64/current/images/netboot/mini.iso Install system with mostly defaults + LVM + OpenSSH server Note that this bug applies to both DHCP and static IP+DNS network configurations Once server rebooted and is available, log in and install dnsmasq + squid: apt-get update && apt-get install squid dnsmasq output of this can be found at https://pastebin.com/9Atuipju journalctl -xe output at https://pastebin.com/uLhfM4jN Furthermore at this point I can run alternating errors root@ubuntu-min:~# date ; service dnsmasq start ; date Wed Apr 4 09:18:07 CEST 2018 Wed Apr 4 09:18:07 CEST 2018 root@ubuntu-min:~# date ; service dnsmasq stop ; date Wed Apr 4 09:18:39 CEST 2018 Wed Apr 4 09:18:39 CEST 2018 root@ubuntu-min:~# date ; service dnsmasq start ; date Wed Apr 4 09:19:10 CEST 2018 Job for dnsmasq.service failed because a timeout was exceeded. See "systemctl status dnsmasq.service" and "journalctl -xe" for details. Wed Apr 4 09:20:40 CEST 2018 root@ubuntu-min:~# date ; service dnsmasq start ; date Wed Apr 4 09:42:57 CEST 2018 Wed Apr 4 09:42:57 CEST 2018 root@ubuntu-min:~# date ; service dnsmasq stop ; date Wed Apr 4 09:43:14 CEST 2018 Wed Apr 4 09:43:14 CEST 2018 root@ubuntu-min:~# date ; service dnsmasq start ; date Wed Apr 4 09:43:26 CEST 2018 Job for dnsmasq.service failed because a timeout was exceeded. See "systemctl status dnsmasq.service" and "journalctl -xe" for details. Wed Apr 4 09:44:56 CEST 2018 and so on... Each and every 1 out of 2 stop/start cycle fails in 1m30s timeout Complete journalctl -xe output attached -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1761096 Title: dnsmasq starts with error on Ubuntu Xenial amd64 when squid installed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1761096/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1853277] Re: Lenovo ThinkBook 14-IML Touchpad not showing up in /proc/bus/input/devices
Nothing new happened. It still doesn't work I attached the new dmesg.log file ** Attachment added: "dmesg.log" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1853277/+attachment/5407766/+files/dmesg.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1853277 Title: Lenovo ThinkBook 14-IML Touchpad not showing up in /proc/bus/input/devices To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1853277/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894338] [NEW] Earphones Volume Control doesn't work
Public bug reported: My earphones are the one coming with Samsung Galaxy S8 (here: https://www.samsung.com/us/mobile/mobile-accessories/phones/samsung- earphones-tuned-by-akg--gray-eo-ig955bsegus) and on my Ubuntu 18.04 (dual-boot with Windows 10, Secure Boot enabled) I have two issues with them (possibly should report a new bug for the second one?) 1) Trying to set the volume from my earphones' controls doesn't work, no modification on the volume, the sound bar on Ubuntu doesn't appear in order to indicate volume change. I would like to change the master volume, or whatever my common laptop controls do when I up/down the volume controls on my earphones, like it happens on Windows 10. Why does the erroneous behavior of being unable to set volume from my earphones happen? 2) Every time I boot or reboot my system and leave the earphones on, without unplugging them, i.e. when Ubuntu boots with the headphone plug already occupied, I don't get any sound from my headphones, no matter how much up and down I turn the volume (from my laptop sound controls), i.e. the sound bar moves up and down and I hear no sound. I have to unplug and re-plug my earphones and only then does Ubuntu recognize them and ask me to select "Headset/Headset with mic/Mic". How can I fix it, so that I don't have to replug every time I boot? ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: pulseaudio 1:11.1-1ubuntu7.10 ProcVersionSignature: Ubuntu 4.15.0-115.116-generic 4.15.18 Uname: Linux 4.15.0-115-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.17 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jason 3523 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Fri Sep 4 23:29:52 2020 InstallationDate: Installed on 2018-09-28 (706 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=el_GR.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/17/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.16.0 dmi.board.name: 02P5YY dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.16.0:bd02/17/2020:svnDellInc.:pnInspiron7570:pvr:rvnDellInc.:rn02P5YY:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 7570 dmi.sys.vendor: Dell Inc. ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894338 Title: Earphones Volume Control doesn't work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1894338/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894329] Re: ZFS revert from grub menu not working.
The attachment "zfs_patch" seems to be a patch. If it isn't, please remove the "patch" flag from the attachment, remove the "patch" tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the team. [This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issues please contact him.] ** Tags added: patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894329 Title: ZFS revert from grub menu not working. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1894329/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1333694] Re: realmd samba-common-bin dependencies
All this being said, on trusty this bug is valid and still happens. Likely because there are many samba updates available, and it is incorrectly selecting an old one: root@trusty:~# apt-cache policy samba-common samba-common: Installed: (none) Candidate: 2:4.3.11+dfsg-0ubuntu0.14.04.20 Version table: 2:4.3.11+dfsg-0ubuntu0.14.04.20+esm8 0 -32768 https://esm.ubuntu.com/ubuntu/ trusty-infra-security/main amd64 Packages 2:4.3.11+dfsg-0ubuntu0.14.04.20 0 500 http://archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ trusty-security/main amd64 Packages 2:4.1.6+dfsg-1ubuntu2 0 500 http://archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages Yet it selected 2:4.1.6+dfsg-1ubuntu2. Xenial (which has 0.16.2) and later behave like in my previous comment. It stops if the required packages are not installed, and packagekit is also not available, and if packagekit is available, it installs what is needed without failing. Since trusty has reached the normal EOL, I suggest to use the workaround that is to manually install the required packages before invoking the realm tool. ** Also affects: realmd (Ubuntu Trusty) Importance: Undecided Status: New ** Changed in: realmd (Ubuntu Trusty) Status: New => Won't Fix ** Changed in: realmd (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1333694 Title: realmd samba-common-bin dependencies To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/realmd/+bug/1333694/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894336] [NEW] package nvidia-340 (not installed) failed to install/upgrade: intentando sobreescribir `/lib/udev/rules.d/71-nvidia.rules', que está también en el paquete nvidia-kernel-common-390
Public bug reported: instalando driver de nvidia-340, la ultima actualización tiene problemas de resolución gráfica ProblemType: Package DistroRelease: Ubuntu 20.04 Package: nvidia-340 (not installed) ProcVersionSignature: Ubuntu 5.4.0-45.49-generic 5.4.55 Uname: Linux 5.4.0-45-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.8 Architecture: amd64 CasperMD5CheckResult: skip Date: Fri Sep 4 20:56:57 2020 ErrorMessage: intentando sobreescribir `/lib/udev/rules.d/71-nvidia.rules', que está también en el paquete nvidia-kernel-common-390 390.138-0ubuntu0.20.04.1 InstallationDate: Installed on 2020-05-12 (115 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: nvidia-graphics-drivers-340 Title: package nvidia-340 (not installed) failed to install/upgrade: intentando sobreescribir `/lib/udev/rules.d/71-nvidia.rules', que está también en el paquete nvidia-kernel-common-390 390.138-0ubuntu0.20.04.1 UpgradeStatus: Upgraded to focal on 2020-05-13 (114 days ago) ** Affects: nvidia-graphics-drivers-340 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894336 Title: package nvidia-340 (not installed) failed to install/upgrade: intentando sobreescribir `/lib/udev/rules.d/71-nvidia.rules', que está también en el paquete nvidia-kernel-common-390 390.138-0ubuntu0.20.04.1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-340/+bug/1894336/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1853277] Re: Lenovo ThinkBook 14-IML Touchpad not showing up in /proc/bus/input/devices
Please try this: https://people.canonical.com/~khfeng/lp1853277-hack-4/ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1853277 Title: Lenovo ThinkBook 14-IML Touchpad not showing up in /proc/bus/input/devices To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1853277/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1880309] Re: "Save Configuration" and "Export" don't work when panel has unconfigured launchers
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: xfce4-panel-profiles (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1880309 Title: "Save Configuration" and "Export" don't work when panel has unconfigured launchers To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4-panel-profiles/+bug/1880309/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1333694] Re: realmd samba-common-bin dependencies
I believe this is fixed since quite some time now. At some point software-properties-common was added to the ubuntu-server metapackage, and that pulls in packagekit. Still, if you don't have it installed, realm complains like this: root@g-adclient1:~# realm -v join ad1.example.com * Resolving: _ldap._tcp.ad1.example.com * Performing LDAP DSE lookup on: 10.51.0.5 * Successfully discovered: ad1.example.com Password for Administrator: * Unconditionally checking packages * Resolving required packages ! PackageKit not available: The name org.freedesktop.PackageKit was not provided by any .service files ! Necessary packages are not installed: sssd-tools sssd libnss-sss libpam-sss adcli realm: Couldn't join realm: Necessary packages are not installed: sssd-tools sssd libnss-sss libpam-sss adcli If selecting winbind, then: root@g-adclient1:~# realm -v join ad1.example.com --client-software=winbind * Resolving: _ldap._tcp.ad1.example.com * Performing LDAP DSE lookup on: 10.51.0.5 * Successfully discovered: ad1.example.com Password for Administrator: * Unconditionally checking packages * Resolving required packages ! PackageKit not available: The name org.freedesktop.PackageKit was not provided by any .service files ! Necessary packages are not installed: winbind libpam-winbind samba-common-bin realm: Couldn't join realm: Necessary packages are not installed: winbind libpam-winbind samba-common-bin So you can either install those packages, or install packagekit and let it do it for you: root@g-adclient1:~# realm -v join ad1.example.com --client-software=winbind * Resolving: _ldap._tcp.ad1.example.com * Performing LDAP DSE lookup on: 10.51.0.5 * Successfully discovered: ad1.example.com Password for Administrator: * Unconditionally checking packages * Resolving required packages * Installing necessary packages: samba-common-bin libpam-winbind winbind * LANG=C LOGNAME=root /usr/bin/net -s /var/cache/realmd/realmd-smb-conf.WZ5TQ0 -U Administrator ads join ad1.example.com Enter Administrator's password: Using short domain name -- AD1 Joined 'G-ADCLIENT1' to dns domain 'ad1.example.com' * LANG=C LOGNAME=root /usr/bin/net -s /var/cache/realmd/realmd-smb-conf.WZ5TQ0 -U Administrator ads keytab create Enter Administrator's password: * /usr/sbin/update-rc.d winbind enable * /usr/sbin/service winbind restart * Successfully enrolled machine in realm Since it tells you what is missing if packagekit isn't installed, and doesn't crash in a bad way, I think adding a dependency or even a recommends on packagekit is too hard, but I can settle for a Suggests. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1333694 Title: realmd samba-common-bin dependencies To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/realmd/+bug/1333694/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1292693] Re: Wrong configuration for service handling
This isn't happening anymore. ** Changed in: realmd (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1292693 Title: Wrong configuration for service handling To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/realmd/+bug/1292693/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894172] Re: isc-dhcp-server using wrong env variable for INTERFACES
see also https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1774342 Thanks -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894172 Title: isc-dhcp-server using wrong env variable for INTERFACES To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1894172/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1766143] Re: webcamoid segfaults (error 4 in libQt5Core.so.5.9.5)
webcamoid 8.1.0+dfsg-7 Ubuntu 18.04.5 LTS $ webcamoid Segmentation fault (core dumped) $dmesg |tail -n 1 [91347.789362] webcamoid[30555]: segfault at 10 ip 7f9b6ff3 sp 7fff62e4bc70 error 4 in libQt5Core.so.5.9.5[7f9baa7ed000+53b000] -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1766143 Title: webcamoid segfaults (error 4 in libQt5Core.so.5.9.5) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webcamoid/+bug/1766143/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1878419] Re: clean up breaks/replaces and packages that are no longer needed
This bug was fixed in the package nova - 2:22.0.0~b2~git2020073014 .2f3a380c3c-0ubuntu2 --- nova (2:22.0.0~b2~git2020073014.2f3a380c3c-0ubuntu2) groovy; urgency=medium [ Chris MacNaughton ] * d/control: Remove Breaks/Replaces that are older than Focal (LP: #1878419). [ Corey Bryant ] * d/control, d/nova-compute-ironic.conf, d/rules: Add nova-compute-ironic binary package. -- Corey Bryant Thu, 03 Sep 2020 16:25:06 -0400 ** Changed in: nova (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1878419 Title: clean up breaks/replaces and packages that are no longer needed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/aodh/+bug/1878419/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894325] Re: Fence Agents should be upgraded to v4.6.0 in Groovy
Alright, got this reviewed by @ahasenack and looks like gawk change isn't needed anymore (skipped me). This way, this is a sync and I just need to wait bileto to finish to check if the sync will cause any autopkgtest regressions or not only. ** Summary changed: - Fence Agents should be upgraded to v4.6.0 in Groovy + [FFe] Fence Agents should be upgraded to v4.6.0 in Groovy ** Description changed: Unfortunately upstream release did not align well with our freeze date for fence-agents. This package is a dependency ONLY for pacemaker: $ apt-cache rdepends fence-agents fence-agents Reverse Depends: - pacemaker + pacemaker and, despite the version bump, and a core code that is very mature, and does not change much, the development of fence-agents is mostly directed to development and fixes of old and existing fencing agents. With that said, the delta is not big: $ git log v4.5.2..v4.6.0 --no-merges --oneline | wc -l 47 and 1/3 of them are fixes. In regards to the other 2/3 of the delta, they enable two important fence agents we have to support sooner than later. - fence_aws agent being backported to Bionic (LP: #1894323) - X (LP: #1889070) Most commits are towarding: fence_aws fence_azure_arm fence_ibmz fence_ipmilan fence_lpar fence_mpath fence_openstack fence_redfish/fence_vmware_soap fence_scsi fence_skalar fence_vbox fence_virsh fence_vmware_cloud fence_vmware_rest fence_vmware_soap And fence_aws, fence_azure_arm, fence_mpath and fence_scsi are important to our HA supportability plans, described at: https://discourse.ubuntu.com/t/ubuntu-ha-pacemaker-fence-agents- supportability/ + + --- + + NOTE: This package will also become a SYNC after this FFe (the delta has + been fixed in latest Debian version). ** Description changed: Unfortunately upstream release did not align well with our freeze date for fence-agents. This package is a dependency ONLY for pacemaker: $ apt-cache rdepends fence-agents fence-agents Reverse Depends: pacemaker and, despite the version bump, and a core code that is very mature, and does not change much, the development of fence-agents is mostly directed to development and fixes of old and existing fencing agents. With that said, the delta is not big: $ git log v4.5.2..v4.6.0 --no-merges --oneline | wc -l 47 and 1/3 of them are fixes. In regards to the other 2/3 of the delta, they enable two important fence agents we have to support sooner than later. - fence_aws agent being backported to Bionic (LP: #1894323) - X (LP: #1889070) Most commits are towarding: fence_aws fence_azure_arm fence_ibmz fence_ipmilan fence_lpar fence_mpath fence_openstack fence_redfish/fence_vmware_soap fence_scsi fence_skalar fence_vbox fence_virsh fence_vmware_cloud fence_vmware_rest fence_vmware_soap And fence_aws, fence_azure_arm, fence_mpath and fence_scsi are important to our HA supportability plans, described at: https://discourse.ubuntu.com/t/ubuntu-ha-pacemaker-fence-agents- supportability/ --- NOTE: This package will also become a SYNC after this FFe (the delta has - been fixed in latest Debian version). + been fixed in latest Debian version). The merge attempt done at: + + https://launchpad.net/~ci-train-ppa- + service/+archive/ubuntu/4245/+packages + + has built correctly (bileto is on going).. only difference from that + merge and the sync is to abandon a change from gawk back to awk (which + will also work). ** Description changed: Unfortunately upstream release did not align well with our freeze date for fence-agents. This package is a dependency ONLY for pacemaker: $ apt-cache rdepends fence-agents fence-agents Reverse Depends: pacemaker and, despite the version bump, and a core code that is very mature, and does not change much, the development of fence-agents is mostly directed to development and fixes of old and existing fencing agents. With that said, the delta is not big: $ git log v4.5.2..v4.6.0 --no-merges --oneline | wc -l 47 and 1/3 of them are fixes. In regards to the other 2/3 of the delta, they enable two important fence agents we have to support sooner than later. - fence_aws agent being backported to Bionic (LP: #1894323) - - X (LP: #1889070) + - Add LPAR fence agent to Pacemaker (LP: #1889070) Most commits are towarding: fence_aws fence_azure_arm fence_ibmz fence_ipmilan fence_lpar fence_mpath fence_openstack fence_redfish/fence_vmware_soap fence_scsi fence_skalar fence_vbox fence_virsh fence_vmware_cloud fence_vmware_rest fence_vmware_soap And fence_aws, fence_azure_arm, fence_mpath and fence_scsi are important to our HA supportability plans, described at: https://discourse.ubuntu.com/t/ubuntu-ha-pacemaker-fence-agents-
[Bug 1874464] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1874464 Title: NETDEV WATCHDOG: enp5s0 (r8169): transmit queue 0 timed out To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1874464/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894334] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894334 Title: GK104 [Geforce GTX 760 GTK] won't work for me with latest Kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894334/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894333] Re: package maas-region-api 2.6.0-7802-g59416a869-0ubuntu1 failed to install/upgrade: installed maas-region-api package post-installation script subprocess returned error exit status 1
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894333 Title: package maas-region-api 2.6.0-7802-g59416a869-0ubuntu1 failed to install/upgrade: installed maas-region-api package post-installation script subprocess returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/maas/+bug/1894333/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894334] [NEW] GK104 [Geforce GTX 760 GTK] won't work for me with latest Kernel
Public bug reported: When migrating from the Kernel 5.4.0-42-lowlatency to 5.4.0-45-lowlatency my Graphic card stopped working properly. My second Monitor went dark. even little things like moving the mouse was just a slide show. When using Grub to load with the previus Kernel (5.4.0-42-lowlatency) my Graphics card worked just fine again. My Bios version is "heavily outdated" as I was told. I'll try to update it to V2.13 soon, maybe that helps run newer Kernel in the future. My Hardware: Mainboard: Z77A-G43 the command "sudo dmidecode -s bios-version" returned: "V2.5" Graphic card: Geforce GTX 760 GTK Driver package: NVIDIA driver metapackage nvidia-driver-435 UbuntuStudio 20.04.1 LTS Kernel 5.4.0-45-lowlatency PS: Thanks for your awesome Work. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-45-lowlatency 5.4.0-45.49 ProcVersionSignature: Ubuntu 5.4.0-45.49-lowlatency 5.4.55 Uname: Linux 5.4.0-45-lowlatency x86_64 ApportVersion: 2.20.11-0ubuntu27.8 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Fri Sep 4 20:51:16 2020 InstallationDate: Installed on 2020-01-26 (222 days ago) InstallationMedia: Ubuntu-Studio 19.10 "Eoan Ermine" - Release amd64 (20191017) IwConfig: lono wireless extensions. enp3s0no wireless extensions. MachineType: MSI MS-7758 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-45-lowlatency root=UUID=58aefce8-42fe-4333-81ae-31d2c867846e ro quiet splash vt.handoff=1 RelatedPackageVersions: linux-restricted-modules-5.4.0-45-lowlatency N/A linux-backports-modules-5.4.0-45-lowlatency N/A linux-firmware 1.187.3 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to focal on 2020-06-21 (75 days ago) dmi.bios.date: 08/31/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V2.5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z77A-G43 (MS-7758) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV2.5:bd08/31/2012:svnMSI:pnMS-7758:pvr1.0:rvnMSI:rnZ77A-G43(MS-7758):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: To be filled by O.E.M. dmi.product.name: MS-7758 dmi.product.sku: To be filled by O.E.M. dmi.product.version: 1.0 dmi.sys.vendor: MSI modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-01-28T17:00:58.663417 ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894334 Title: GK104 [Geforce GTX 760 GTK] won't work for me with latest Kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894334/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
