[Bug 1559836] Comment bridged from LTC Bugzilla
--- Comment From vaish...@in.ibm.com 2016-07-07 02:40 EDT--- == comment from Pavithra == Hi, Issue could be reproduced in 16.04.01 build. ubuntu@tuleta4u-lp14:~$ uname -a Linux tuleta4u-lp14 4.4.0-24-generic #43-Ubuntu SMP Wed Jun 8 19:25:36 UTC 2016 ppc64le ppc64le ppc64le GNU/Linux Log === root@tuleta4u-lp14:/home/ubuntu/xfstests# ./check btrfs/041 FSTYP -- btrfs PLATFORM -- Linux/ppc64le tuleta4u-lp14 4.4.0-24-generic MKFS_OPTIONS -- /dev/loop1 MOUNT_OPTIONS -- /dev/loop1 /mnt/scratch btrfs/041[failed, exit status 1] - output mismatch (see /home/ubuntu/xfstests/results//btrfs/041.out.bad) --- tests/btrfs/041.out 2016-06-15 07:26:04.347320804 -0400 +++ /home/ubuntu/xfstests/results//btrfs/041.out.bad2016-06-15 08:00:41.948122839 -0400 @@ -11,30 +11,5 @@ wrote 100/100 bytes at offset 99000 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) 67edd038aaa42adb5a1aa78f2eb1d2b6 SCRATCH_MNT/foo -67edd038aaa42adb5a1aa78f2eb1d2b6 -Testing restore of file compressed with zlib -wrote 10/10 bytes at offset 0 -XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) ... (Run 'diff -u tests/btrfs/041.out /home/ubuntu/xfstests/results//btrfs/041.out.bad' to see the entire diff) Ran: btrfs/041 Failures: btrfs/041 Failed 1 of 1 tests Thanks, Pavithra -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1559836 Title: BTRFS: Testing restore of file compressed with lzo falied To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/btrfs-tools/+bug/1559836/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568573] Re: [Lenovo Thinkpad T460] Ultra Dock external displays not detected after suspend/resume cycle
As per my previous comment, 4.6.0-040600-generic #201606030904 is not effected by this bug. I've been using it for a month without issue. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568573 Title: [Lenovo Thinkpad T460] Ultra Dock external displays not detected after suspend/resume cycle To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1568573/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599496] Re: Tomcat7 applications not running after unattended security-upgrade to 7.0.52-1ubuntu0.6 (over 7.0.52-1ubuntu0.3) on Ubuntu 14.04.4 LTS
About restoring and blacklisting, the same situation here. What log files would you need? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599496 Title: Tomcat7 applications not running after unattended security-upgrade to 7.0.52-1ubuntu0.6 (over 7.0.52-1ubuntu0.3) on Ubuntu 14.04.4 LTS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/tomcat7/+bug/1599496/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1598102] Re: Xorg crashed with SIGABRT in OsAbort()
*** This bug is a duplicate of bug 1543192 *** https://bugs.launchpad.net/bugs/1543192 Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: nvidia-graphics-drivers (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1598102 Title: Xorg crashed with SIGABRT in OsAbort() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/1598102/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1593213] Re: snap install --channel=beta not working when snap already installed
(note that the website message has been changed since the bug was opened to match reality). Indeed, the error message has to change. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1593213 Title: snap install --channel=beta not working when snap already installed To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1593213/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1596391] Re: pdal ftbfs because cmake on Ubuntu points to multi-arch directories
** Changed in: cmake (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1596391 Title: pdal ftbfs because cmake on Ubuntu points to multi-arch directories To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cmake/+bug/1596391/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1563155] Re: No Application Data Found
None of the above worked for me. Instead, there were several plugins that gave the following error: Failed to parse /usr/share/app-info/xmls/org.freedesktop.fwupd.xml file: cannot process file of type application/x-go+xml I later got a similar error at /var/cache/app-info/xmls/fwupd.xml For the time being, I removed the fwupd.xml files (after making a backup) and all works fine again. When I check the mimetype it shows application/xml; I'm not sure where the application/x-go+xml is coming from. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1563155 Title: No Application Data Found To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1563155/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1470250] Re: [Hyper-V] Ubuntu 14.04.2 LTS Generation 2 SCSI Errors on VSS Based Backups
Both crashed, 3.15rc1 after about 20h, 3.14 only after 66h I am starting to wonder if it might be a good idea to run the good(?) 3.13.0-86(+revert) kernel for a week or two to make sure its actually good. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1470250 Title: [Hyper-V] Ubuntu 14.04.2 LTS Generation 2 SCSI Errors on VSS Based Backups To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1470250/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599695] Re: When running cmake from QtC on a webbrowser-app branch it fails
I’m not seeing that on my up-to-date xenial setup. Do you have xvfb installed? ** Changed in: webbrowser-app (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599695 Title: When running cmake from QtC on a webbrowser-app branch it fails To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1599695/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1546565] Re: Ownership/Permissions of vhost_user sockets for openvswitch-dpdk make them unusable by libvirt/qemu/kvm
Hi Michael, this seems to confuse people regularly, so instead of just answering questions as last time I went over the whole bug again to summarize. Thanks for being persistent pitti and mwhudson! TL;DR please unsubscribe sponsors and SRU Verification Summary: Upstream DPDK & Openvswitch (and libvirt): This is a back and forth discussion who should fix it and who not. It is essentially looping around with no project accepting a fix yet and leaving the overall solution (OVS+DPDK on KVM Guests) unusable for end users. That is why we carry the delta for now - DPDK to provide the option, Openvswitch to show an example how to exploit the option. DPDK (fix to make option available): - fixed in Yakkety 2.2.0-0ubuntu9 - fixed in Xenial 2.2.0-0ubuntu8 - Debian (I'm co-leading the Debian effort, the fix is in there already) neutron-openvswitch Juju Charms Collection (exploit this from charms): - already fixed in 4f6e2ca2 by James Page Openvswitch (just add example to default config): - the debdiff of #6 should have gone to Xenial - since we now have yakkety I'll add another debdiff for yakkety - Debian needs to get a recent Openvswitch first and the DPDK with the patch before we can push - given that: - upstream hasn't decided on a solution yet - it is only the example that we wanted to be extended - it is covered in https://help.ubuntu.com/16.04/serverguide/DPDK.html#dpdk-openvswitch => I think we can drop this for now. ** Changed in: openvswitch (Ubuntu) Status: Incomplete => Won't Fix ** Changed in: openvswitch (Ubuntu Xenial) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1546565 Title: Ownership/Permissions of vhost_user sockets for openvswitch-dpdk make them unusable by libvirt/qemu/kvm To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpdk/+bug/1546565/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1414218] Re: Remove extraneous trace in linux/dhcp.py
** Changed in: neutron (Ubuntu Trusty) Importance: Undecided => Low -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1414218 Title: Remove extraneous trace in linux/dhcp.py To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1414218/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1565679] Re: [Dell PowerEdge 1850] No front VGA console/display output after boot
Christopher, thanks for pointing me to the correct upstream project. Bug was reported and can be found here: https://bugs.freedesktop.org/show_bug.cgi?id=96838 ** Bug watch added: freedesktop.org Bugzilla #96838 https://bugs.freedesktop.org/show_bug.cgi?id=96838 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1565679 Title: [Dell PowerEdge 1850] No front VGA console/display output after boot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1565679/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1586799] Re: Maximised windows do not return to their original position
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: compiz (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1586799 Title: Maximised windows do not return to their original position To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1586799/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1598503] Re: [needs-packaging] xfdashboard
** Changed in: ubuntu Status: New => In Progress ** Changed in: ubuntu Assignee: (unassigned) => Jeremy Bicha (jbicha) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1598503 Title: [needs-packaging] xfdashboard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1598503/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599685] Re: package language-pack-gnome-en-base 1:16.04+20160627 failed to install/upgrade: package language-pack-gnome-en-base is already installed and configured
*** This bug is a duplicate of bug 1407757 *** https://bugs.launchpad.net/bugs/1407757 ** This bug has been marked a duplicate of bug 1407757 multi-arch packages cannot be installed due to dpkg wrongly detecting them as already installed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599685 Title: package language-pack-gnome-en-base 1:16.04+20160627 failed to install/upgrade: package language-pack-gnome-en-base is already installed and configured To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/1599685/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1380364] Re: lightdm writes XDISPLAY instead of tty device name to utmp record
I'm really struggling to find the correct behaviour here. What I know: - man utmp shows: charut_line[UT_LINESIZE]; /* Device name of tty - "/dev/" */ - GDM 2.20 only put the tty into this field - GDM git does: /* * Set ut_line to the device name associated with this display * but remove the "/dev/" prefix. If no device, then use the * $DISPLAY value. */ if (display_device != NULL && g_str_has_prefix (display_device, "/dev/")) { strncpy (u->ut_line, display_device + strlen ("/dev/"), sizeof (u->ut_line)); } else if (x11_display_name != NULL) { strncpy (u->ut_line, x11_display_name, sizeof (u->ut_line)); } - 'w' (the version in procps anyway) does: if (*u->ut_line == ':') /* idle unknown for xdm logins */ printf(" ?xdm? "); - xdm (1.1.11) doesn't set ut_line at all. - AccountsService only stores ut_line and ut_tv (the timestamp) as a login record. - gnome-control-center checks the history via AccountsService and checks if ut_line has the prefix ":" or "tty" So while this clearly wasn't intended when utmp/wtmp was designed it seems everyone is using ut_line with ttyN for text logins and :n for X logins. That suggests we should revert the patch in LightDM. I haven't been able to get GDM to work on my machine, can someone confirm the output of w in a modern GDM? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1380364 Title: lightdm writes XDISPLAY instead of tty device name to utmp record To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm/+bug/1380364/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1592229] Re: Install grub-efi-ia32 on i386/efi platforms
** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1592229 Title: Install grub-efi-ia32 on i386/efi platforms To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1592229/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599191] Re: [LTCTest][Opal][OP820] update_flash -d option is throwing /usr/sbin/update_flash_nv: 595: [: x47: unexpected operator
--- Comment From pavsu...@in.ibm.com 2016-07-07 00:22 EDT--- I have installed the proposed powerpc-utils package from the link provided: https://launchpad.net/ubuntu/xenial/ppc64el/powerpc-ibm-utils/1.3.1-2ubuntu0.1 root@ltc-garri2:~# dpkg --list | grep powerpc-utils ii powerpc-utils 1.3.1-2ubuntu0.1ppc64el utilities for maintenance of PowerPC platforms (metapackage) root@ltc-garri2:~# which update_flash /usr/sbin/update_flash root@ltc-garri2:~# dpkg -S /usr/sbin/update_flash powerpc-ibm-utils: /usr/sbin/update_flash root@ltc-garri2:~# update_flash -d Firmware version: Product Name : OpenPOWER Firmware Product Version : IBM-garrison-ibm-OP8_v1.9_2.1 Product Extra :op-build-dcacfac Product Extra :buildroot-bc248fa Product Extra :skiboot-5f25590 Product Extra :hostboot-4c63029-6034fa6 Product Extra :linux-4.4.9-openpower2-ebc7b6d Product Extra :petitboot-v1.1.1-fc477ec Product Extra :garrison-xml-b453a81 Product Extra :occ-19a3ebc Product Extra :hostboot-binar The issue is resolved with the powerpc-utils_1.3.1-2ubuntu0.1 package. ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599191 Title: [LTCTest][Opal][OP820] update_flash -d option is throwing /usr/sbin/update_flash_nv: 595: [: x47: unexpected operator To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/powerpc-utils/+bug/1599191/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1579331] Re: A problem occurred while installing the package language-selector-common 0.165.1.
[Expired for language-selector (Ubuntu) because there has been no activity for 60 days.] ** Changed in: language-selector (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1579331 Title: A problem occurred while installing the package language-selector- common 0.165.1. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/language-selector/+bug/1579331/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1560696] Re: [ASUSTeK COMPUTER INC. G750JM] hibernate/resume failure [non-free: nvidia_uvm nvidia_modeset nvidia]
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1560696 Title: [ASUSTeK COMPUTER INC. G750JM] hibernate/resume failure [non-free: nvidia_uvm nvidia_modeset nvidia] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1560696/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1379867] Re: totally remove assossiated in synaptic
[Expired for synaptic (Ubuntu) because there has been no activity for 60 days.] ** Changed in: synaptic (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1379867 Title: totally remove assossiated in synaptic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/synaptic/+bug/1379867/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1522976] Re: [NVIDIA GeForce 7100] X freezes after opening Amazon (Ubuntu Web Browser) or System Settings in Unity (also other situations)
[Expired for xserver-xorg-video-nouveau (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xserver-xorg-video-nouveau (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1522976 Title: [NVIDIA GeForce 7100] X freezes after opening Amazon (Ubuntu Web Browser) or System Settings in Unity (also other situations) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/+bug/1522976/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1597053] Re: linux: 4.2.0-42.49 -proposed tracker
Hardware Certification have begun testing this -proposed kernel. ** Changed in: kernel-sru-workflow/certification-testing Status: Confirmed => In Progress ** Changed in: kernel-sru-workflow/certification-testing Assignee: Canonical Hardware Certification (canonical-hw-cert) => Yung Shen (kaxing) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1597053 Title: linux: 4.2.0-42.49 -proposed tracker To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1597053/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599714] [NEW] Ubiquity Installer Crashes; Language Plugin Code 4
Public bug reported: In a live Linux ISO based on Ubuntu 16.04 created by Pinguy Builder (formerly Remastersys), Ubiquity (the installer) crashes with the language plugin error code 4. Any logs needed will be provided upon request (and instructions on how to get to them), and the test ISO uploaded to anyone who thinks they might be able to fix the issue. Just state that you're interested! This is the one bug that is holding up the release of 3S. ** Affects: pinguyos Importance: Undecided Status: New ** Affects: trenta-os Importance: Critical Status: New ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: ubiquity ** Also affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Also affects: pinguyos Importance: Undecided Status: New ** Description changed: - In a live Linux ISO based on Ubuntu 16.04 created by Pinguy Builder - (formerly Remastersys), Ubiquity (the installer) crashes with the - language plugin error code 4. Any logs needed will be provided upon - request (and instructions on how to get to them), and the test ISO - uploaded to anyone who thinks they might be able to fix the issue. Just - state that you're interested! + In a live Linux ISO based on Ubuntu 16.04 created by Pinguy Builder (formerly Remastersys), Ubiquity (the installer) crashes with the language plugin error code 4. Any logs needed will be provided upon request (and instructions on how to get to them), and the test ISO uploaded to anyone who thinks they might be able to fix the issue. Just state that you're interested! + This is the one bug that is holding up the release of 3S. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599714 Title: Ubiquity Installer Crashes; Language Plugin Code 4 To manage notifications about this bug go to: https://bugs.launchpad.net/pinguyos/+bug/1599714/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1548009] Re: [FFe] ZFS pools should be automatically scrubbed
It turns out this isn't actually working. The problem is the PATH in cron, which does not include /sbin, where the zpool command lives. I've attached a debdiff to fix this. I've tested to confirm that the PATH thing fixes it, but on Sunday, I'll know absolutely 100% by verifying that it works "in the wild". ** Patch added: "fix-scrubbing.debdiff" https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1548009/+attachment/4696723/+files/fix-scrubbing.debdiff -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1548009 Title: [FFe] ZFS pools should be automatically scrubbed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1548009/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1577170] Re: screen cannot be turned back on after being switched off after some time of inactivity
So the latest patch doesn't help for the VGA monitor not going off? Please attach the output of xrandr --verbose when both monitors are enabled. It doesn't matter whether or not any of my patches are enabled when you do that. The kernel panic is a kernel bug and probably not directly related to my patches or your issues. It may indicate that Xorg crashed though; was there anything interesting in Xorg.0.log.old after it happened? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1577170 Title: screen cannot be turned back on after being switched off after some time of inactivity To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/1577170/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1291427] Re: Baobab won't start: Failed to register: Timeout was reached
So how can we further diagnose the issue? I see it too. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1291427 Title: Baobab won't start: Failed to register: Timeout was reached To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/baobab/+bug/1291427/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1536165] Re: X server hangs on start when DisplayPort is connected
>I'm not sure what you are going on about, but you found an offense where none was given. "You're not allowed to be offended unless I say you're allowed to be offended." >Despite this, since you aren't interested in pursuing this further, there is nothing further to do with this report. Your commitment to the quality of the software you maintain is admirable. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1536165 Title: X server hangs on start when DisplayPort is connected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1536165/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1548009] Re: [FFe] ZFS pools should be automatically scrubbed
** Changed in: zfs-linux (Ubuntu) Status: Fix Released => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1548009 Title: [FFe] ZFS pools should be automatically scrubbed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1548009/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599707] [NEW] Grub failed during 16.04 install
Public bug reported: I had just set up all of the partitioning (only ext4 partitions plus a swap partition). I submitted the run for installation and came back to find that the Grub install had failed. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubiquity 2.21.63 [modified: lib/partman/automatically_partition/question] ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CasperVersion: 1.376 Date: Wed Jul 6 23:14:23 2016 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubiquity-2.21.63 ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599707 Title: Grub failed during 16.04 install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1599707/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1536165] Re: X server hangs on start when DisplayPort is connected
Jonathan Kamens, I'm not sure what you are going on about, but you found an offense where none was given. Despite this, since you aren't interested in pursuing this further, there is nothing further to do with this report. However, if you would like to see this pursued further, please do as previously requested and we may take it from there. ** Changed in: xorg (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1536165 Title: X server hangs on start when DisplayPort is connected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1536165/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1536165] Re: X server hangs on start when DisplayPort is connected
Good grief. I took the time to submit the bug. I took the time to upgrade my BIOS and report to you that it's still broken after doing so. I have a solution to my problem -- using the nvidia driver instead of nouveau -- so the marginal value to me in continuing to invest time and effort in this is minimal. I think I've done my duty here. Do something more about this or not; that's your call. I'm out. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1536165 Title: X server hangs on start when DisplayPort is connected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1536165/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1536165] Re: X server hangs on start when DisplayPort is connected
By the way, perhaps I would be more likely to be willing to help more if you hadn't made a snotty comment about bug-reporting etiquette when you asked me to update my BIOS. A comment which, oddly, appears to have disappeared. I find it quite disconcerting that people are apparently able to make passive-aggressive rude comments to bug reporters and then delete them without a trace. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1536165 Title: X server hangs on start when DisplayPort is connected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1536165/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1078068] Re: Video blinking blue during incoming call
@nacc Patch messed up my machine - all the Fn buttons stopped working and got non-responsive -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1078068 Title: Video blinking blue during incoming call To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/skype/+bug/1078068/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589056] Re: HDMI does not work
BTW When using nouveau driver, there is also an issue with suspend to RAM: after returning, visible mouse cursor does not follow mouse events, but stays still. You can operate by mouse, though, but it is hard, since the effective cursor is not shown where it should. Workaraund is same. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589056 Title: HDMI does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1589056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589658] Re: Ubuntu 16.04 The AlwaysShared option for lightdm does not work.
What did you expect to happen? You can do two remote logins to the same session? ** Changed in: lightdm (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589658 Title: Ubuntu 16.04 The AlwaysShared option for lightdm does not work. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1589658/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589658] Re: Ubuntu 16.04 The AlwaysShared option for lightdm does not work.
Note that LightDM actually handles the VNC connections - so this would never work. Closing this assuming this is what you expected. ** Changed in: lightdm (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589658 Title: Ubuntu 16.04 The AlwaysShared option for lightdm does not work. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1589658/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1592123] Re: org.freedesktop.packagekit.trigger-offline-update warning
I'm not getting the error when running from command line, but I see the errors in my syslog. Running 16.04 (gnome-software 3.20.1+git20160617.1.0440874.ubuntu- xenial-0ubuntu1~16.04.1) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1592123 Title: org.freedesktop.packagekit.trigger-offline-update warning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1592123/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1592123] Re: org.freedesktop.packagekit.trigger-offline-update warning
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: gnome-software (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1592123 Title: org.freedesktop.packagekit.trigger-offline-update warning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1592123/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599695] [NEW] When running cmake from QtC on a webbrowser-app branch it fails
Public bug reported: When running cmake from QtC on a webbrowser-app branch in Xenial it fails with the following error: CMake Error at src/Ubuntu/CMakeLists.txt:31 (message): Invalid chromium version: '' ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New ** Description changed: - When running cmake from QtC on a webbrowser-app branch it fails with the - following error: + When running cmake from QtC on a webbrowser-app branch in Xenial it + fails with the following error: CMake Error at src/Ubuntu/CMakeLists.txt:31 (message): - Invalid chromium version: '' + Invalid chromium version: '' -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599695 Title: When running cmake from QtC on a webbrowser-app branch it fails To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1599695/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599689] Re: [webapp-container] When sharing a photo to facebook, a "Ubuntu Web App" album is created and used as the target
** Also affects: webapps-core Importance: Undecided Status: New ** Changed in: webapps-core Assignee: (unassigned) => Alexandre Abreu (abreu-alexandre) ** Changed in: webapps-sprint Assignee: (unassigned) => Alexandre Abreu (abreu-alexandre) ** Changed in: webapps-core Importance: Undecided => Medium ** Changed in: webapps-sprint Importance: Undecided => Medium ** Changed in: webbrowser-app (Ubuntu) Importance: Undecided => Medium ** Changed in: webapps-core Status: New => Confirmed ** Changed in: webapps-sprint Status: New => Confirmed ** Changed in: webbrowser-app (Ubuntu) Status: New => Invalid ** No longer affects: webbrowser-app (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599689 Title: [webapp-container] When sharing a photo to facebook, a "Ubuntu Web App" album is created and used as the target To manage notifications about this bug go to: https://bugs.launchpad.net/webapps-core/+bug/1599689/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599690] Re: Overlay created as Popups should not have an "open in the webrowser" button
** Changed in: webapps-sprint Importance: Undecided => Medium ** Changed in: webbrowser-app (Ubuntu) Importance: Undecided => Medium ** Summary changed: - Overlay created as Popups should not have an "open in the webrowser" button + [webapp-container] Overlay created as Popups should not have an "open in the webrowser" button ** Changed in: webapps-sprint Status: New => Confirmed ** Changed in: webbrowser-app (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599690 Title: [webapp-container] Overlay created as Popups should not have an "open in the webrowser" button To manage notifications about this bug go to: https://bugs.launchpad.net/webapps-sprint/+bug/1599690/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599692] [NEW] [webapp-container] URLs dispatched from an app to a webapp are not opened
Public bug reported: There is again a failure when dispatching URLs from an app to a webapp. For example, if in the facebook webapp, one clicks on a specific twitter.com/* url that links to the Twitter webapp, the webapp opens but not to the desired URL. ** Affects: webapps-sprint Importance: High Assignee: Alexandre Abreu (abreu-alexandre) Status: New ** Affects: webbrowser-app (Ubuntu) Importance: High Assignee: Alexandre Abreu (abreu-alexandre) Status: New ** Also affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New ** Changed in: webapps-sprint Milestone: None => sprint-24 ** Changed in: webbrowser-app (Ubuntu) Assignee: (unassigned) => Alexandre Abreu (abreu-alexandre) ** Changed in: webapps-sprint Assignee: (unassigned) => Alexandre Abreu (abreu-alexandre) ** Changed in: webapps-sprint Importance: Undecided => High ** Changed in: webbrowser-app (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599692 Title: [webapp-container] URLs dispatched from an app to a webapp are not opened To manage notifications about this bug go to: https://bugs.launchpad.net/webapps-sprint/+bug/1599692/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599690] [NEW] Overlay created as Popups should not have an "open in the webrowser" button
Public bug reported: In the webapp container, overlays can be created through a href with target="_blank" or or window.open, the latter usually being used to open a popup window. Those should be treated differently than the usual overlay since they should be considered as part of the website flow and might communicate with the original website through e.g. window.postMessage. For those overlays, it does not make much sense to have a "open in webbrowser" button at the top right. An example of those popups & windows can be found in here maps. 1. go to https://maps.here.com 2. click 'signin' 3. a new overlay is created with the Oxide.NavigationRequest.DispositionNewForegroundTab disposition, 4. if you click 'login with facebook' a new overlay is created but it is created with Oxide.NavigationRequest.DispositionNewPopup disposition and the website uses window.postMessage to handle the full duplex communication between the windows, ** Affects: webapps-sprint Importance: Medium Assignee: Alexandre Abreu (abreu-alexandre) Status: New ** Affects: webbrowser-app (Ubuntu) Importance: Medium Assignee: Alexandre Abreu (abreu-alexandre) Status: New ** Changed in: webbrowser-app (Ubuntu) Assignee: (unassigned) => Alexandre Abreu (abreu-alexandre) ** Also affects: webapps-sprint Importance: Undecided Status: New ** Changed in: webapps-sprint Milestone: None => sprint-24 ** Changed in: webapps-sprint Assignee: (unassigned) => Alexandre Abreu (abreu-alexandre) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599690 Title: Overlay created as Popups should not have an "open in the webrowser" button To manage notifications about this bug go to: https://bugs.launchpad.net/webapps-sprint/+bug/1599690/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1536165] Re: X server hangs on start when DisplayPort is connected
Jonathan Kamens, to see if this is already resolved, could you please test http://cdimage.ubuntu.com/daily-live/current/ and advise to the results? ** Tags removed: bios-outdated-r01-a2 ** Tags added: latest-bios-r01-a4 ** Description changed: I just bought a new Acer Predator AG6-710, which supposedly comes with a NVIDIA GeForce GTX 980 graphics controller. It has four output plugs -- DVI, two mini DisplayPort, and HDMI. When I have only one monitor plugged in, on the DVI port using DVI-A, i.e., through a DVI-A -> VGA adapter and then a VGA cable, Ubuntu boots up just fine. However, when I have two monitors plugged in, the first as described above and the second through one of the DisplayPorts via a mini DisplayPort to DVI-I adapter and a DVI-A cable, the X server hangs on boot, and I end up with two blank screens and monitors claiming no signal is being sent. I've attached the Xorg log file when this happens. It happens every single time I boot, i.e., it is reliable. - Any additional debugging information I can provide or debugging steps I - can take, please ask, I will gladly help. + WORKAROUND: Use nvidia-352. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xserver-xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 4.2.0-25.30-generic 4.2.6 Uname: Linux 4.2.0-25-generic x86_64 .tmp.unity.support.test.1: - + ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Wed Jan 20 07:13:46 2016 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu DkmsStatus: - virtualbox, 5.0.10, 4.2.0-23-generic, x86_64: installed - virtualbox, 5.0.10, 4.2.0-25-generic, x86_64: installed + virtualbox, 5.0.10, 4.2.0-23-generic, x86_64: installed + virtualbox, 5.0.10, 4.2.0-25-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: - NVIDIA Corporation GM204 [GeForce GTX 970] [10de:13c2] (rev a1) (prog-if 00 [VGA controller]) -Subsystem: Device [196e:1131] + NVIDIA Corporation GM204 [GeForce GTX 970] [10de:13c2] (rev a1) (prog-if 00 [VGA controller]) + Subsystem: Device [196e:1131] InstallationDate: Installed on 2016-01-16 (4 days ago) InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) MachineType: Acer Predator G6-710 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.2.0-25-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 Renderer: Software SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/21/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: R01-A1 dmi.board.name: Predator G6-710 dmi.board.vendor: Acer dmi.chassis.type: 3 dmi.chassis.vendor: Acer dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrR01-A1:bd09/21/2015:svnAcer:pnPredatorG6-710:pvr:rvnAcer:rnPredatorG6-710:rvr:cvnAcer:ct3:cvr: dmi.product.name: Predator G6-710 dmi.sys.vendor: Acer version.compiz: compiz 1:0.9.12.2+15.10.20151015-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.64-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4 version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0+git20150819-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20150808-0ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu3 xserver.bootTime: Wed Jan 20 06:50:52 2016 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.17.2-1ubuntu9.1 xserver.video_driver: modeset ** Changed in: xorg (Ubuntu) Importance: Low => Medium ** Changed in: xorg (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1536165 Title: X server hangs on start when DisplayPort is connected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1536165/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1329510] Re: [Asus X200M] Changing Backlight not working
** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1329510 Title: [Asus X200M] Changing Backlight not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1329510/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599689] [NEW] [webapp-container] When sharing a photo to facebook, a "Ubuntu Web App" album is created and used as the target
Public bug reported: When sharing a photo to facebook through the content hub, once the upload is successful, one can notice that the photo had been automatically added to an album called "Ubuntu Web App". It seems that the creator of the OAuth token (that acts on behalf of the user), is used as the name of the album for the upload. I couldn't find a reference in the graph API reference anything about that specific behavior: https://developers.facebook.com/docs/graph-api/reference/v2.6/photo This comes from a user report that also mentions a few extra elements that I havent noticed in my tests, here it is for reference: "When you upload a photo to facebook the web app adds a hyperlink with the text "Ubuntu Web App" which takes you to http://not.a.real.website.com/ which redirects you to Website.com." ** Affects: webapps-sprint Importance: Undecided Status: New ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Assignee: Alexandre Abreu (abreu-alexandre) Status: New ** Tags: webapp-container ** Changed in: webbrowser-app (Ubuntu) Assignee: (unassigned) => Alexandre Abreu (abreu-alexandre) ** Also affects: webapps-sprint Importance: Undecided Status: New ** Changed in: webapps-sprint Milestone: None => backlog ** Summary changed: - When sharing a photo to facebook, a "Ubuntu Web App" album is created and used as the target + [webapp-container] When sharing a photo to facebook, a "Ubuntu Web App" album is created and used as the target ** Tags added: webapp-container -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599689 Title: [webapp-container] When sharing a photo to facebook, a "Ubuntu Web App" album is created and used as the target To manage notifications about this bug go to: https://bugs.launchpad.net/webapps-sprint/+bug/1599689/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1536165] Re: X server hangs on start when DisplayPort is connected
>1) Please provide the output of the following terminal command (not perform an >apport-collect): >sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date $ sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date [sudo] password for jik: R01-A4 05/18/2016 $ ** Changed in: xorg (Ubuntu) Status: Expired => New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1536165 Title: X server hangs on start when DisplayPort is connected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1536165/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1536165] Re: X server hangs on start when DisplayPort is connected
>If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? No. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1536165 Title: X server hangs on start when DisplayPort is connected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1536165/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1414218] Re: Remove extraneous trace in linux/dhcp.py
I've uploaded the patch to the trusty-proposed queue. Not sure how to handle the cloud-archive stuff! ** Also affects: neutron (Ubuntu Trusty) Importance: Undecided Status: New ** Changed in: neutron (Ubuntu) Status: New => Fix Released ** Changed in: neutron (Ubuntu Trusty) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1414218 Title: Remove extraneous trace in linux/dhcp.py To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1414218/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599683] Re: uvt-kvm wait stack trace
Probably related to: sarnold@wopr:~$ ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o CheckHostIP=no -l ubuntu 192.168.122.182 env UVTOOL_WAIT_INTERVAL=8.0 UVTOOL_WAIT_TIMEOUT=120.0 sh - Warning: Permanently added '192.168.122.182' (ECDSA) to the list of known hosts. Permission denied (publickey). I suspect that means I screwed up the keys when creating the image. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599683 Title: uvt-kvm wait stack trace To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/uvtool/+bug/1599683/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1085706] Re: pam_ecryptfs: seteuid error
I've some problem with ecryptfs, after setup this with issue when I unlock my PC unix_chkpwd[2596]: check pass; user unknown I've fixed this # ls -l /etc/shadow -rw-r- 1 root root 1096 июля 5 09:49 /etc/shadow # chgrp shadow /etc/shadow # ls -l /etc/shadow -rw-r- 1 root shadow 1096 июля 5 09:49 /etc/shadow -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1085706 Title: pam_ecryptfs: seteuid error To manage notifications about this bug go to: https://bugs.launchpad.net/ecryptfs/+bug/1085706/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1356526] Re: [HP Elitebook 755] wifi not working in 14.04 LTS
** Tags added: needs-apport-collect -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1356526 Title: [HP Elitebook 755] wifi not working in 14.04 LTS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1356526/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599685] Re: package language-pack-gnome-en-base 1:16.04+20160627 failed to install/upgrade: package language-pack-gnome-en-base is already installed and configured
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599685 Title: package language-pack-gnome-en-base 1:16.04+20160627 failed to install/upgrade: package language-pack-gnome-en-base is already installed and configured To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/1599685/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1534538] Re: AliasMatch directive does not accept long URI
Thank you for your contribution to Ubuntu! The patch looks OK to me (although I had to rebase it onto the current patch in trusty-proposed). I've uploaded it to the trusty queue, although I imagine it won't get into trusty-proposed until the current package there completes verification (which should be soon). Can you fill out the [regression potential] section of the description? ** Also affects: apache2 (Ubuntu Trusty) Importance: Undecided Status: New ** Changed in: apache2 (Ubuntu) Status: Triaged => Fix Released ** Description changed: - Description of problem: + [impact] When accessed long URI location that configured by AliasMatch directive, Apache failed to allocate memory and process aborted. It's same that https://bugzilla.redhat.com/show_bug.cgi?id=1120019. This fixed in upstream, http://svn.apache.org/viewvc?view=revision&revision=1583175. Can you please backports apache 2.4.10 from vivid or just fix in trusty ? Thanks. - === Details === - Description:Ubuntu 14.04.3 LTS - Release: 14.04 - apache2: 2.4.7-1ubuntu4.8 + [test case] + Config: - Cordially + ubuntu@ubuntu:/etc/apache2$ cat sites-available/alias.conf + +AliasMatch ^/alias-test/ /var/www/html/index.html + + + With old apache: + + ubuntu@ubuntu:/etc/apache2$ curl localhost/alias-test/short_uri + + + + TEST + + + ubuntu@ubuntu:/etc/apache2$ curl localhost/alias-test/very_l + ong_uri + curl: (52) Empty reply from server + ubuntu@ubuntu:/etc/apache2$ + + With new apache: + + ubuntu@ubuntu:/etc/apache2$ curl localhost/alias-test/short_uri + + + + TEST + + + ubuntu@ubuntu:/etc/apache2$ curl localhost/alias-test/very_l + ong_uri + + + + TEST + + + + [regression potential] + TBD ** Changed in: apache2 (Ubuntu Trusty) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1534538 Title: AliasMatch directive does not accept long URI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1534538/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568573] Re: [Lenovo Thinkpad T460] Ultra Dock external displays not detected after suspend/resume cycle
Ryan, to follow up, did the 4.6.0 kernel show the issue? Also, to keep this relevant to upstream, could you please test the latest mainline kernel (4.7-rc6) and advise to the results? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568573 Title: [Lenovo Thinkpad T460] Ultra Dock external displays not detected after suspend/resume cycle To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1568573/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1586046] Re: Unclaimed register detected after reading register 0x65f10
Dawid Wróbel, in order to allow additional upstream developers to examine the issue, at your earliest convenience, could you please test the latest upstream kernel available from http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D ? Please keep in mind the following: 1) The one to test is at the very top line at the top of the page (not the daily folder). 2) The release names are irrelevant. 3) The folder time stamps aren't indicative of when the kernel actually was released upstream. 4) Install instructions are available at https://wiki.ubuntu.com/Kernel/MainlineBuilds . If testing on your main install would be inconvenient, one may: 1) Install Ubuntu to a different partition and then test this there. 2) Backup, or clone the primary install. If the latest kernel did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this issue is fixed in the mainline kernel, please add the following tags by clicking on the yellow circle with a black pencil icon, next to the word Tags, located at the bottom of the report description: kernel-fixed-upstream kernel-fixed-upstream-X.Y-rcZ Where X, and Y are the first two numbers of the kernel version, and Z is the release candidate number if it exists. If the mainline kernel does not fix the issue, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-X.Y-rcZ Please note, an error to install the kernel does not fit the criteria of kernel-bug-exists-upstream. Also, you don't need to apport-collect further unless specifically requested to do so. Once testing of the latest upstream kernel is complete, please mark this report Status Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1586046 Title: Unclaimed register detected after reading register 0x65f10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1586046/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599685] [NEW] package language-pack-gnome-en-base 1:16.04+20160627 failed to install/upgrade: package language-pack-gnome-en-base is already installed and configured
Public bug reported: I don't even know what's going on ProblemType: Package DistroRelease: Ubuntu 16.04 Package: language-pack-gnome-en-base 1:16.04+20160627 ProcVersionSignature: Ubuntu 4.4.0-30.49-lowlatency 4.4.13 Uname: Linux 4.4.0-30-lowlatency i686 ApportVersion: 2.20.1-0ubuntu2.1 AptdaemonVersion: 1.1.1+bzr982-0ubuntu14 Architecture: i386 Date: Wed Jul 6 20:19:11 2016 DuplicateSignature: package:language-pack-gnome-en-base:1:16.04+20160627 Processing triggers for man-db (2.7.5-1) ... dpkg: error processing package language-pack-en-base (--configure): package language-pack-en-base is already installed and configured ErrorMessage: package language-pack-gnome-en-base is already installed and configured InstallationDate: Installed on 2016-06-24 (12 days ago) InstallationMedia: Ubuntu-Studio 16.04 LTS "Xenial Xerus" - Release i386 (20160420.1) PackageArchitecture: all RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.12~ubuntu16.04.1 SourcePackage: dpkg Title: package language-pack-gnome-en-base 1:16.04+20160627 failed to install/upgrade: package language-pack-gnome-en-base is already installed and configured UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: dpkg (Ubuntu) Importance: Undecided Status: New ** Tags: already-installed apport-package i386 need-duplicate-check package-from-proposed xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599685 Title: package language-pack-gnome-en-base 1:16.04+20160627 failed to install/upgrade: package language-pack-gnome-en-base is already installed and configured To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/1599685/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599686] [NEW] Broken dependencies in trusty
Public bug reported: When i try to install "libgnustep-base1.24" or "gnustep-base-runtime" 1.24.0-1 it won't install due to unmet dependencies, Using trusty tahr 14.04 kubuntu. ** Affects: gnustep-base (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599686 Title: Broken dependencies in trusty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnustep-base/+bug/1599686/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589418] Re: udisksd high CPU usage
Bones, to see if this is already resolved, could you please test for this via http://cdimage.ubuntu.com/daily-live/current/ and advise to the results? ** Tags removed: needs-apport-collect -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589418 Title: udisksd high CPU usage To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1589418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1596391] Re: pdal ftbfs because cmake on Ubuntu points to multi-arch directories
This is fixed in pdal (1.2.0-4). ** Changed in: pdal (Ubuntu) Status: Triaged => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1596391 Title: pdal ftbfs because cmake on Ubuntu points to multi-arch directories To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cmake/+bug/1596391/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1570923] Re: bacula-dir won't start with "undefined symbol: mysql_init"
Hi, I've read through the bug and while it seems good progress is being made, AFAICT there isn't anything to be uploaded yet and so I'm going to unsubscribe sponsors. Please give clear instructions when you re- subscribe the team :-) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1570923 Title: bacula-dir won't start with "undefined symbol: mysql_init" To manage notifications about this bug go to: https://bugs.launchpad.net/bacula/+bug/1570923/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599683] [NEW] uvt-kvm wait stack trace
Public bug reported: sarnold@wopr:~$ uvt-kvm wait jj --insecure Warning: Permanently added '192.168.122.182' (ECDSA) to the list of known hosts. Permission denied (publickey). Traceback (most recent call last): File "/usr/bin/uvt-kvm", line 35, in uvtool.libvirt.kvm.main_cli_wrapper(sys.argv[1:]) File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 717, in main_cli_wrapper main(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 712, in main args.func(parser, args) File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 645, in main_wait main_wait_remote(parser, args) File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 613, in main_wait_remote private_key_file=args.ssh_private_key_file, File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 497, in ssh ssh_call, preexec_fn=subprocess_setup, close_fds=True, stdin=stdin File "/usr/lib/python2.7/subprocess.py", line 541, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '[u'ssh', u'-o', u'UserKnownHostsFile=/dev/null', u'-o', u'StrictHostKeyChecking=no', u'-o', u'CheckHostIP=no', u'-l', u'ubuntu', u'192.168.122.182', u'env', u'UVTOOL_WAIT_INTERVAL=8.0', u'UVTOOL_WAIT_TIMEOUT=120.0', u'sh', u'-']' returned non-zero exit status 255 Repeatable, a few seconds later: sarnold@wopr:~$ uvt-kvm wait jj --insecure Warning: Permanently added '192.168.122.182' (ECDSA) to the list of known hosts. Permission denied (publickey). Traceback (most recent call last): File "/usr/bin/uvt-kvm", line 35, in uvtool.libvirt.kvm.main_cli_wrapper(sys.argv[1:]) File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 717, in main_cli_wrapper main(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 712, in main args.func(parser, args) File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 645, in main_wait main_wait_remote(parser, args) File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 613, in main_wait_remote private_key_file=args.ssh_private_key_file, File "/usr/lib/python2.7/dist-packages/uvtool/libvirt/kvm.py", line 497, in ssh ssh_call, preexec_fn=subprocess_setup, close_fds=True, stdin=stdin File "/usr/lib/python2.7/subprocess.py", line 541, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '[u'ssh', u'-o', u'UserKnownHostsFile=/dev/null', u'-o', u'StrictHostKeyChecking=no', u'-o', u'CheckHostIP=no', u'-l', u'ubuntu', u'192.168.122.182', u'env', u'UVTOOL_WAIT_INTERVAL=8.0', u'UVTOOL_WAIT_TIMEOUT=120.0', u'sh', u'-']' returned non-zero exit status 255 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: uvtool-libvirt 0~bzr99-0ubuntu1 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 Date: Wed Jul 6 18:22:57 2016 InstallationDate: Installed on 2016-04-04 (93 days ago) InstallationMedia: Ubuntu-Server 16.04 LTS "Xenial Xerus" - Beta amd64 (20160325) PackageArchitecture: all ProcEnviron: TERM=rxvt-unicode PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: uvtool UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: uvtool (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599683 Title: uvt-kvm wait stack trace To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/uvtool/+bug/1599683/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589056] Re: HDMI does not work
Jarno Suni, in order to allow additional upstream developers to examine the issue, at your earliest convenience, could you please test the latest upstream kernel available from http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D ? Please keep in mind the following: 1) The one to test is at the very top line at the top of the page (not the daily folder). 2) The release names are irrelevant. 3) The folder time stamps aren't indicative of when the kernel actually was released upstream. 4) Install instructions are available at https://wiki.ubuntu.com/Kernel/MainlineBuilds . If testing on your main install would be inconvenient, one may: 1) Install Ubuntu to a different partition and then test this there. 2) Backup, or clone the primary install. If the latest kernel did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this issue is fixed in the mainline kernel, please add the following tags by clicking on the yellow circle with a black pencil icon, next to the word Tags, located at the bottom of the report description: kernel-fixed-upstream kernel-fixed-upstream-X.Y-rcZ Where X, and Y are the first two numbers of the kernel version, and Z is the release candidate number if it exists. If the mainline kernel does not fix the issue, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-X.Y-rcZ Please note, an error to install the kernel does not fit the criteria of kernel-bug-exists-upstream. Also, you don't need to apport-collect further unless specifically requested to do so. Once testing of the latest upstream kernel is complete, please mark this report Status New. Please let us know your results. Thank you for your help. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589056 Title: HDMI does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1589056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589056] Re: HDMI does not work
** Tags added: latest-bios-f.20 ** Attachment removed: "ProcEnviron.txt" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1589056/+attachment/4676606/+files/ProcEnviron.txt ** Attachment removed: "JournalErrors.txt" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1589056/+attachment/4676605/+files/JournalErrors.txt ** Attachment removed: "Dependencies.txt" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1589056/+attachment/4676604/+files/Dependencies.txt ** Description changed: xrandr displays "HDMI-1 disconnected (normal left inverted right x axis y axis)" even if it is connected using a HDMI cable to a Samsung monitor - (model S27B350H) that has both HDMI and VGA connectors. Using Nvidia - driver the output works, though. + (model S27B350H) that has both HDMI and VGA connectors. + + WORKAROUND: Use the Nvidia proprietary driver. Graphics by lspci -vvv: 01:00.0 VGA compatible controller: NVIDIA Corporation G84GLM [Quadro FX 570M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 30c5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: Kernel driver in use: nouveau - ProblemType: Bug - DistroRelease: Ubuntu 15.10 - Package: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu3 - ProcVersionSignature: Ubuntu 4.2.0-36.42-generic 4.2.8-ckt8 - Uname: Linux 4.2.0-36-generic x86_64 - ApportVersion: 2.19.1-0ubuntu5 - Architecture: amd64 - CurrentDesktop: XFCE - Date: Sat Jun 4 10:58:35 2016 - EcryptfsInUse: Yes - InstallationDate: Installed on 2015-11-21 (195 days ago) - InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) - SourcePackage: xserver-xorg-video-nouveau - UpgradeStatus: No upgrade log present (probably fresh install) - --- + --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 BootLog: - root: clean, 247512/1281120 files, 1867600/512 blocks - [[0;1;31mFAILED[0m] Failed to start Automatically refresh installed snaps. - See 'systemctl status snapd.refresh.service' for details. - [[0;32m OK [0m] Started Authenticate and Authorize Users to Run Privileged Tasks. + root: clean, 247512/1281120 files, 1867600/512 blocks + [[0;1;31mFAILED[0m] Failed to start Automatically refresh installed snaps. + See 'systemctl status snapd.refresh.service' for details. + [[0;32m OK [0m] Started Authenticate and Authorize Users to Run Privileged Tasks. CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None DistUpgraded: 2016-06-24 18:11:48,939 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroRelease: Ubuntu 16.04 DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: - NVIDIA Corporation G84GLM [Quadro FX 570M] [10de:040c] (rev a1) (prog-if 00 [VGA controller]) -Subsystem: Hewlett-Packard Company G84GLM [Quadro FX 570M] [103c:30c5] + NVIDIA Corporation G84GLM [Quadro FX 570M] [10de:040c] (rev a1) (prog-if 00 [VGA controller]) + Subsystem: Hewlett-Packard Company G84GLM [Quadro FX 570M] [103c:30c5] InstallationDate: Installed on 2015-11-21 (228 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) Package: xorg 1:7.7+13ubuntu3 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=bdc3be24-dee9-4ead-bca0-c9b1e45a87e5 ro persistent quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Tags: xenial ubuntu Uname: Linux 4.4.0-28-generic x86_64 UpgradeStatus: Upgraded to xenial on 2016-06-24 (12 days ago) UserGroups: - + _MarkForUpload: True dmi.bios.date: 12/01/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68MVD Ver. F.20 dmi.board.name: 30C5 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 71.36 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68MVDVer.F.20:bd12/01/2011:svnHewlett-Packard:pn:pvrF.20:rvnHewlett-Packard:rn30C5:rvrKBCVersion71.36:cvnHewlett-Packard:ct10:cvr: dmi.product.version: F.20 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1ubuntu0.16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-n
[Bug 1584485] Re: Upgrading samba to latest security fixes together with winbind in nsswitch.conf can harm entire OS
Unsubscribing sponsors until a more viable approach appears. Good luck! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1584485 Title: Upgrading samba to latest security fixes together with winbind in nsswitch.conf can harm entire OS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1584485/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599681] [NEW] ceph-osd process hung and blocked ps listings
Public bug reported: We ran into a situation over the past couple of days where we had 2 different ceph-osd nodes crash in such a way that they caused ps listing to hang when enumerating the process. Both had a call trace associated with them: Node 1: Jul 4 07:46:15 provider-cs-03 kernel: [4188396.493011] ceph-osdD 882029a67b90 0 5312 1 0x0004 Jul 4 07:46:15 provider-cs-03 kernel: [4188396.590564] 882029a67b90 881037cb8000 8820284f3700 882029a68000 Jul 4 07:46:16 provider-cs-03 kernel: [4188396.688603] 88203296e5a8 88203296e5c0 0015 8820284f3700 Jul 4 07:46:16 provider-cs-03 kernel: [4188396.789329] 882029a67ba8 817ec495 8820284f3700 882029a67bf8 Jul 4 07:46:16 provider-cs-03 kernel: [4188396.891376] Call Trace: Jul 4 07:46:16 provider-cs-03 kernel: [4188396.939271] [] schedule+0x35/0x80 Jul 4 07:46:16 provider-cs-03 kernel: [4188396.989957] [] rwsem_down_read_failed+0xea/0x120 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.041502] [] call_rwsem_down_read_failed+0x14/0x30 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.092616] [] ? __clear_user+0x25/0x50 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.141510] [] ? __clear_user+0x25/0x50 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.189877] [] ? down_read+0x20/0x30 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.237513] [] __do_page_fault+0x398/0x430 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.285588] [] do_page_fault+0x22/0x30 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.332936] [] page_fault+0x28/0x30 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.379495] [] ? __clear_user+0x25/0x50 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.426400] [] copy_fpstate_to_sigframe+0x118/0x1d0 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.474904] [] get_sigframe.isra.7.constprop.9+0x12d/0x150 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.563204] [] do_signal+0x1e8/0x6d0 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.609783] [] ? __sys_sendmsg+0x42/0x80 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.656633] [] ? handle_mm_fault+0x250/0x540 Jul 4 07:46:16 provider-cs-03 kernel: [4188397.703785] [] exit_to_usermode_loop+0x59/0xa2 Jul 4 07:46:17 provider-cs-03 kernel: [4188397.751367] [] syscall_return_slowpath+0x4e/0x60 Jul 4 07:46:17 provider-cs-03 kernel: [4188397.799369] [] int_ret_from_sys_call+0x25/0x8f Node 2: [733869.727139] CPU: 17 PID: 1735127 Comm: ceph-osd Not tainted 4.4.0-15-generic #31-Ubuntu [733869.796954] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.3.6 06/03/2015 [733869.927182] task: 881841dc6e00 ti: 8810cc0a task.ti: 8810cc0a [733870.059139] RIP: 0010:[] [] task_numa_find_cpu+0x2cd/0x710 [733870.192753] RSP: :8810cc0a3bd8 EFLAGS: 00010257 [733870.260298] RAX: RBX: 8810cc0a3c78 RCX: 0012 [733870.389322] RDX: RSI: RDI: 8810210a0e00 [733870.517883] RBP: 8810cc0a3c40 R08: 0006 R09: 013e [733870.646335] R10: 03b4 R11: 001f R12: 881018118000 [733870.774514] R13: 0006 R14: 8810210a0e00 R15: 0379 [733870.902262] FS: 7fdcfab03700() GS:88203e60() knlGS: [733871.031347] CS: 0010 DS: ES: CR0: 80050033 [733871.097820] CR2: 7fdcfab02c20 CR3: 001029204000 CR4: 001406e0 [733871.223381] Stack: [733871.282453] 8810cc0a3c40 811f04ce 88102f6e9680 0012 [733871.404947] 0077 008f 00016d40 0006 [733871.527250] 881841dc6e00 8810cc0a3c78 01ac 01b8 [733871.649648] Call Trace: [733871.707884] [] ? migrate_page_copy+0x21e/0x530 [733871.770946] [] task_numa_migrate+0x43e/0x9b0 [733871.832808] [] ? page_add_anon_rmap+0x10/0x20 [733871.893897] [] numa_migrate_preferred+0x79/0x80 [733871.954283] [] task_numa_fault+0x7f4/0xd40 [733872.013128] [] handle_mm_fault+0xbc0/0x1820 [733872.071309] [] ? do_futex+0x120/0x500 [733872.128149] [] ? __fget_light+0x25/0x60 [733872.184044] [] __do_page_fault+0x197/0x400 [733872.239300] [] do_page_fault+0x22/0x30 [733872.293001] [] page_fault+0x28/0x30 [733872.345187] Code: d0 4c 89 f7 e8 95 c7 ff ff 49 8b 84 24 d8 01 00 00 49 8b 76 78 31 d2 49 0f af 86 b0 00 00 00 4c 8b 45 d0 48 8b 4d b0 48 83 c6 01 <48> f7 f6 4c 89 c6 48 89 da 48 8d 3c 01 48 29 c6 e8 de c5 ff ff [733872.507088] RIP [] task_numa_find_cpu+0x2cd/0x710 [733872.559965] RSP [733872.673773] ---[ end trace aec37273a19e57dc ]--- In the ceph logs for node 1 there is: ./include/interval_set.h: 340: FAILED assert(0) ceph version 0.94.7 (d56bdf93ced6b80b07397d57e3fa68fe68304432) 1: (ceph::__ceph_assert_fail(char const*, char const*, int, char const*)+0x8b) [0x56042ebdeceb] 2: (()+0x4892b8) [0x56042e9512b8] 3: (boost::statechart::simple_s
[Bug 1589128] Re: Please update Quassel to 0.12.4
I don't see any reason not to do that, but I am not really the decider of such things. It looks like the only difference is that the Ubuntu package puts the user in the Kubuntu IRC channel by default. I will ask the people from #kubuntu-devel to comment. -- You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to quassel in Ubuntu. https://bugs.launchpad.net/bugs/1589128 Title: Please update Quassel to 0.12.4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/quassel/+bug/1589128/+subscriptions -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 1574278] Re: AbiWord text cursor starts to flicker after adding some text
** Also affects: abiword via http://bugzilla.abisource.com/show_bug.cgi?id=13791 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1574278 Title: AbiWord text cursor starts to flicker after adding some text To manage notifications about this bug go to: https://bugs.launchpad.net/abiword/+bug/1574278/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1578201] Re: ampache does not work on xenial/php7
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ampache (Ubuntu Xenial) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1578201 Title: ampache does not work on xenial/php7 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ampache/+bug/1578201/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1578201] Re: ampache does not work on xenial/php7
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ampache (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1578201 Title: ampache does not work on xenial/php7 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ampache/+bug/1578201/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1596871] Re: [Bug] Legacy audio couldn't work after S3 resume on Kabylake
** Information type changed from Private to Public ** Changed in: linux (Ubuntu) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1596871 Title: [Bug] Legacy audio couldn't work after S3 resume on Kabylake To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1596871/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1546565] Re: Ownership/Permissions of vhost_user sockets for openvswitch-dpdk make them unusable by libvirt/qemu/kvm
I'm patch pilot today and a little confused. Can you check my summary of the situation? The reason this is on the sponsorship report is to get the patch in comment #6 uploaded to yakkety? Martin asked for it to be sent to Debian, but as there is no dpdk in debian yet, there is no support for it in openvswitch in debian either, so there is nowhere to send the patch. As such the patch seems reasonable to me. Hopefully when Debian does get support from dpdk they won't do anything gratuitously different to what Ubuntu did... ** Changed in: openvswitch (Ubuntu) Status: Triaged => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1546565 Title: Ownership/Permissions of vhost_user sockets for openvswitch-dpdk make them unusable by libvirt/qemu/kvm To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpdk/+bug/1546565/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589056] Re: HDMI does not work
I had to open the browser link manually. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589056 Title: HDMI does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1589056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589056] Re: HDMI does not work
The computer is HP Compaq 8510w Mobile Workstation. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589056 Title: HDMI does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1589056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589128] Re: Please update Quassel to 0.12.4
Hello, thank you for your contribution to Ubuntu (I'm a quassel user myself, so this is extra appreciated :-p)! However, I see that 0.12.4 is in Debian now. Is there any reason to prefer your package over syncing 0.12.4-2 from Debian? It seems that the Ubuntu delta is no longer applicable. ** Changed in: quassel (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589128 Title: Please update Quassel to 0.12.4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/quassel/+bug/1589128/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589401] Re: cannot view wifi networks after re-enabling wifi
Inactive to change distro for now. Can't use Ubuntu on my laptop now for work. I really hope this will be fixed soon. I haven't had a problem like this in years in Ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589401 Title: cannot view wifi networks after re-enabling wifi To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1589401/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1583437] Re: Directly after boot there is no network
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1583437 Title: Directly after boot there is no network To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1583437/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589379] Re: System frozen after resume, on Ubuntu 16.04 kernel 4.4.0-22
bastien, to keep this relevant to upstream, could you please test the latest mainline kernel (4.7-rc6) and advise to the results? ** Tags removed: needs-bisect ** Tags added: bisect-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589379 Title: System frozen after resume, on Ubuntu 16.04 kernel 4.4.0-22 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1589379/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1554509] Re: Screen remains black after resume from hibernation
YS1, to clarify, with 4.7-rc6, you hibernated, and then without any intervention, it immediately resumed from hibernation? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1554509 Title: Screen remains black after resume from hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1554509/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1596638] Update Released
The verification of the Stable Release Update for lsb has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1596638 Title: python2 cannot import lsb_release on yakkety and now xenial To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lsb/+bug/1596638/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1575899] Re: Text disappears after suspend
Henrik Blidh, please see https://wiki.ubuntu.com/Kernel/MainlineBuilds for kernels that Ubuntu bases off of. ** Changed in: xorg (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1575899 Title: Text disappears after suspend To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1574036] Re: Sleep with ubuntu 16.04 with kernel 4.4
claudio, this bug report is being closed due to your last comment https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1574036/comments/11 regarding this being fixed with an update. For future reference you can manage the status of your own bugs by clicking on the current status in the yellow line and then choosing a new status in the revealed drop down box. You can learn more about bug statuses at https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time to report this bug and helping to make Ubuntu better. Please submit any future bugs you may find. ** Changed in: linux (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1574036 Title: Sleep with ubuntu 16.04 with kernel 4.4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1574036/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599675] Re: The network installation with the mirror inside ubuntu-16.04-server-amd64.iso leaves several invalid sources.list entries(updates, security) in the installed system
Looking for help from debian-installer team on this one. ** Changed in: debian-installer (Ubuntu) Assignee: Taco Screen team (taco-screen-team) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599675 Title: The network installation with the mirror inside ubuntu-16.04-server- amd64.iso leaves several invalid sources.list entries(updates,security) in the installed system To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1599675/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599676] Re: package compiz 1:0.9.12.2+16.04.20160526-0ubuntu1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599676 Title: package compiz 1:0.9.12.2+16.04.20160526-0ubuntu1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1599676/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1596638] Re: python2 cannot import lsb_release on yakkety and now xenial
This bug was fixed in the package lsb - 9.20160110ubuntu0.2 --- lsb (9.20160110ubuntu0.2) xenial; urgency=medium * Revert changes to python2 vs. python3 installation of lsb_release.py, inadvertently breaking imports of lsb_release in python2. LP: #1596638. -- Steve Langasek Wed, 06 Jul 2016 08:18:48 -0700 ** Changed in: lsb (Ubuntu Xenial) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1596638 Title: python2 cannot import lsb_release on yakkety and now xenial To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lsb/+bug/1596638/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599676] [NEW] package compiz 1:0.9.12.2+16.04.20160526-0ubuntu1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration
Public bug reported: Isso ocorreu, quando o PC estava realizando varias funções como; o player de música ativo, realizando download, instalação de aplicativo e navegador aberto ocasionando o travamento do PC em que precisei dar um reset. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: compiz 1:0.9.12.2+16.04.20160526-0ubuntu1 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.1 AptOrdering: gnome-calendar: Install compiz: Configure gnome-calendar: Configure NULL: ConfigurePending Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed Jul 6 18:41:06 2016 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu DuplicateSignature: package:compiz:1:0.9.12.2+16.04.20160526-0ubuntu1 Processing triggers for libglib2.0-0:amd64 (2.48.1-1~ubuntu16.04.1) ... dpkg: error processing package compiz (--configure): package is in a very bad inconsistent state; you should ErrorMessage: package is in a very bad inconsistent state; you should reinstall it before attempting configuration GraphicsCard: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] GsettingsChanges: InstallationDate: Installed on 2016-07-06 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. PackageArchitecture: all ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=9e78afd6-0f4a-4e57-948a-7349c7cac86e ro quiet splash vt.handoff=7 RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.12~ubuntu16.04.1 SourcePackage: compiz Title: package compiz 1:0.9.12.2+16.04.20160526-0ubuntu1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/09/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080015 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080015:bd10/09/2012:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvn:rn:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. version.compiz: compiz 1:0.9.12.2+16.04.20160526-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1ubuntu0.16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Wed Jul 6 20:57:56 2016 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputLenovo Lenovo Low Profile USB Keyboard KEYBOARD, id 8 inputLenovo Lenovo Low Profile USB Keyboard KEYBOARD, id 9 inputSIGMACHIP Usb Mouse MOUSE, id 10 xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 49278 vendor PHL xserver.version: 2:1.18.3-1ubuntu2.2 ** Affects: compiz (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package compiz-0.9 need-duplicate-check ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1599676 Title: package compiz 1:0.9.12.2+16.04.20160526-0ubuntu1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1599676/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1294699] Re: Xubuntu desktop crashes in call to cairo after setting fixed-width bitmap (pcf) GTK font
Dammit, April *2019* of course... that's what happens when you have too many distro releases installed :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1294699 Title: Xubuntu desktop crashes in call to cairo after setting fixed-width bitmap (pcf) GTK font To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk2-engines-murrine/+bug/1294699/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1574278] Re: AbiWord text cursor starts to flicker after adding some text
Raised upstream as http://bugzilla.abisource.com/show_bug.cgi?id=13791 ** Bug watch added: AbiSource bug tracker #13791 http://bugzilla.abisource.com/show_bug.cgi?id=13791 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1574278 Title: AbiWord text cursor starts to flicker after adding some text To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/abiword/+bug/1574278/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1599675] [NEW] The network installation with the mirror inside ubuntu-16.04-server-amd64.iso leaves several invalid sources.list entries(updates, security) in the installed system
Public bug reported: ---Problem Description--- I tried to provision the x86_64 kvm guest with the mirror inside ubuntu-16.04-server-amd64.iso, the preseed lines to specify the mirror is: ### Mirror settings # If you select ftp, the mirror/country string does not need to be set. d-i mirror/country string manual d-i mirror/protocol string http d-i mirror/http/directory string /install/ubuntu16.04/x86_64 d-i mirror/http/proxy string # Suite to install. #d-i mirror/suite string testing # Suite to use for loading installer components (optional). #d-i mirror/udeb/suite string testing In the installed system, there are several invalid lines in the /etc/apt/sources.list root@bybc0605:~# cat /etc/apt/sources.list|grep -v "^#" deb http://xcatmn/install/ubuntu16.04/x86_64 xenial main restricted deb http://xcatmn/install/ubuntu16.04/x86_64 xenial-updates main restricted deb http://security.ubuntu.com/ubuntu xenial-security main restricted Since the mirror inside ubuntu-16.04-server-amd64.iso does not include "xenial-updates" and " xenial-security ", the 2 entries are invalid and apt-get update will complain error messages. Is there any preseed configuration to prevent writing the "xenial-updates" and " xenial- security " lines in /etc/apt/sources.list in the installed system? ---uname output--- Linux bybc0605 4.4.0-28-generic #47-Ubuntu SMP Fri Jun 24 10:09:13 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux Machine Type = x86_64 kvm guest ---boot type--- Network boot ---bootloader--- grub ---Kernel cmdline used to launch install--- ---Bootloader protocol--- http ---Install repository type--- CDROM ---Point of failure--- Problem during post-install (stage 2) configuration or other problem seen after reboot The whole preseed file: ### Localization d-i debian-installer/locale string en_US d-i localechooser/supported-locales multiselect en_US.UTF-8 # Keyboard Selection d-i console-setup/ask_detect boolean false d-i keyboard-configuration/layoutcode string en # Use the following settings if you wish to make use of the network-console # component for remote installation over SSH. This only makes sense if you # intend to perform the remainder of the installation manually. #UNCOMMENTOENABLESSH# d-i anna/choose_modules string network-console #d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key #UNCOMMENTOENABLESSH# d-i network-console/password password cluster #UNCOMMENTOENABLESSH# d-i network-console/password-again password cluster ### Network Configuration d-i netcfg/get_hostname string unassigned-hostname d-i netcfg/get_domain string unassigned-domain d-i netcfg/wireless_wep string d-i netcfg/dhcp_timeout string 120 ### Mirror settings # If you select ftp, the mirror/country string does not need to be set. d-i mirror/country string manual d-i mirror/protocol string http d-i mirror/http/directory string /install/ubuntu16.04/x86_64 d-i mirror/http/proxy string # Suite to install. #d-i mirror/suite string testing # Suite to use for loading installer components (optional). #d-i mirror/udeb/suite string testing # Use the following option to add additional boot parameters for the # installed system (if supported by the bootloader installer). # Note: options passed to the installer will be added automatically. d-i debian-installer/add-kernel-opts string console=tty0 console=ttyS0 ### Partitioning # This creates a small /boot partition, suitable # swap, and uses the rest of the space for the root partition: d-i partman-auto/method string regular d-i partman-lvm/device_remove_lvm boolean true d-i partman-md/device_remove_md boolean true #create the /tmp/partitionfile based on the uefi or legacy bios d-i partman/early_command string \ { \ wget http://`cat /tmp/xcatserver`/install/autoinst/getinstdisk; chmod u+x getinstdisk; ./getinstdisk; \ debconf-set partman-auto/disk ""; \ } >>/tmp/pre-install.log 2>&1 d-i partman-auto/expert_recipe_file string /tmp/partitionfile # This makes partman automatically partition without confirmation, provided # that you told it what to do using one of the methods above. d-i partman/confirm_write_new_label boolean true d-i partman/choose_partition select finish d-i partman/confirm boolean true d-i partman/confirm_nooverwrite boolean true #XCA_PARTMAN_ADDITIONAL_CFG# ### Account setup d-i passwd/root-login boolean true d-i passwd/make-user boolean false d-i passwd/root-password-crypted password $1$X96IRi06$i/Q4b76jcT7SjIvHhZDw9/ ### Clock and time zone setup d-i clock-setup/ntp boolean true d-i clock-setup/ntp-server string 10.5.107.196 d-i clock-setup/utc boolean true d-i time/zone string Etc/UTC ### Apt setup d-i apt-setup/multiverse boolean false d-i apt-setup/universe boolean false d-i apt-setup/backports boolean false d-i apt-setup/updates boolean false ### Boot loader installation d-i grub-installer/only_debian boolean true ### Package selection tasksel tasksel/first multiselect standard # gawk re
[Bug 1294699] Re: Xubuntu desktop crashes in call to cairo after setting fixed-width bitmap (pcf) GTK font
14.04 isn't EOL till April 2017, and yes, it can be reproduced there. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1294699 Title: Xubuntu desktop crashes in call to cairo after setting fixed-width bitmap (pcf) GTK font To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk2-engines-murrine/+bug/1294699/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1294699] Re: Xubuntu desktop crashes in call to cairo after setting fixed-width bitmap (pcf) GTK font
Sorry, I misread... it can be reproduced in 16.04, at least in Ubuntu MATE edition - I've tested it there. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1294699 Title: Xubuntu desktop crashes in call to cairo after setting fixed-width bitmap (pcf) GTK font To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk2-engines-murrine/+bug/1294699/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1596638] Re: python2 cannot import lsb_release on yakkety and now xenial
And this if it helps: | hloeung@steelix:~$ apt-cache policy lsb-release | lsb-release: | Installed: 9.20160110ubuntu0.2 | Candidate: 9.20160110ubuntu0.2 | Version table: | *** 9.20160110ubuntu0.2 500 | 500 http://archive.ubuntu.com//ubuntu xenial-proposed/main amd64 Package | 100 /var/lib/dpkg/status | 9.20160110ubuntu0.1 500 | 500 http://archive.ubuntu.com//ubuntu xenial-updates/main amd64 Packages | 9.20160110 500 | 500 http://archive.ubuntu.com//ubuntu xenial/main amd64 Packages -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1596638 Title: python2 cannot import lsb_release on yakkety and now xenial To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lsb/+bug/1596638/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1596638] Re: python2 cannot import lsb_release on yakkety and now xenial
Fixed in 9.20160110ubuntu0.2. Before update: | hloeung@steelix:~$ python2.7 | ... | >>> import lsb_release | Traceback (most recent call last): | File "", line 1, in | ImportError: No module named lsb_release | >>> After: | hloeung@steelix:~$ ls /usr/lib/python*/dist-packages/lsb* -l | lrwxrwxrwx 1 root root 38 Jul 6 16:29 /usr/lib/python2.7/dist-packages/lsb_release.py -> ../../../share/pyshared/lsb_release.py | lrwxrwxrwx 1 root root 38 Jul 6 16:29 /usr/lib/python3/dist-packages/lsb_release.py -> ../../../share/pyshared/lsb_release.py | hloeung@steelix:~$ python2.7 | >>> import lsb_release | >>> Thanks guys! ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1596638 Title: python2 cannot import lsb_release on yakkety and now xenial To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lsb/+bug/1596638/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1528028] Re: The package manager does not report installing a desktop environment as a dependency
** Changed in: gnome-software Status: Unknown => In Progress ** Changed in: gnome-software Importance: Unknown => Medium -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1528028 Title: The package manager does not report installing a desktop environment as a dependency To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-software/+bug/1528028/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1597267] Re: ThinkPad X260 connecting external DisplayPort hangs system
Tero Marttila, if you want your issue addressed as soon as possible, you will want to create a net new report, indicating that you need the commit(s) identified and backported to linux-stable so that it may be included in Ubuntu. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1597267 Title: ThinkPad X260 connecting external DisplayPort hangs system To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1597267/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1598503] Re: [needs-packaging] xfdashboard
** Changed in: debian Status: Unknown => New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1598503 Title: [needs-packaging] xfdashboard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1598503/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1598968] Re: Blurry album art
Hi Michael, the thumbnailer keeps images up to 1920x1920 at their original size. Thumbnails are delivered to the application as JPG, so there can be some quality loss during format conversion, but it should almost always be unnoticeable or very minor. If a source image is in a format with an alpha channel (GIF, PNG, etc.) or is in SVG, the thumbnail is delivered to the application as PNG, to preserve transparency. If you are seeing prominent scaling artefacts, it could be that the application has have asked for a thumbnail at a small size and then upscaled it for display. Alternatively, there might be a problem in the thumbnailer with image conversion. To be sure, could you please attach the original song that exhibits this problem, together with an exact description of how you navigated to the blurry image in the music app? With that, we can have a look at why things are not looking right. ** Changed in: thumbnailer (Ubuntu) Status: New => Incomplete ** Changed in: thumbnailer (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1598968 Title: Blurry album art To manage notifications about this bug go to: https://bugs.launchpad.net/music-app/+bug/1598968/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589056] Re: HDMI does not work
Jarno Suni, could you please provide the full computer model as noted on the sticker of the computer itself (not from the Bug Description)? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589056 Title: HDMI does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1589056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1574845] Re: Hardware accelerated video decoding causes GPU crash (radeon driver)
Daro, could you please specify how you made it work in 15.10? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1574845 Title: Hardware accelerated video decoding causes GPU crash (radeon driver) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1574845/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs