This bug is not fixed for me in 2:3.4.7~dfsg-1ubuntu3.5.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in Ubuntu.
https://bugs.launchpad.net/bugs/623342
Title:
ntlm_auth returns invalid NT_KEY
--
Ubuntu-server-bugs mailing
Public bug reported:
Binary package hint: likewise-open
Logged in as a local user, I used 'domainjoin-cli' to join the windows
domain. This instantly killed the gnome panel, dbus, and the
NetworkManager applet, and therefore networking.
Now domainjoin-gui and domainjoin-cli indicate that I am
Public bug reported:
Binary package hint: likewise-open
If a user enters an incorrect password too often while likewise-open is
in cached/disconnected mode, it will lock the account. Unfortunately it
then becomes impossible to access the account until it's authenticated
against the domain
Ubuntu Jaunty, likewise-open version 4.1.2982-0ubuntu2.
The domain account is never locked out, because the incorrect passwords
were entered with the machine disconnected from the network. Therefore
there is no way for the DC to even know about the login attempts.
relevant sections of my pam
turning on debug in pam_lwidentity.conf, my /var/log/auth.log tells me
the following:
May 5 12:25:55 host su[8722]: pam_lwidentity(su:auth): PAM config:
global:krb5_ccache_type 'FILE'
May 5 12:25:55 host su[8722]: pam_lwidentity(su:auth): failed to get GP info
May 5 12:25:55 host su[8722]:
Public bug reported:
Binary package hint: gnome-screensaver
Currently, if one's account is locked out, gnome-screensaver will not
allow the user to unlock the screen. It should.
This is on karmic, with likewise-open authentication against Active
Directory.
** Affects: gnome-screensaver
Sure: so that a PC doesn't become totally unusable just because someone
entered the wrong password a few times somewhere else.
--
gnome-screensaver should allow screen unlock even if account is locked out
https://bugs.launchpad.net/bugs/404321
You received this bug notification because you are a
It's totally unusable to me, since I only have one AD account so
switching to another user isn't really viable.
Obviously there's the workaround of going to a console session as root
and killing gnome-screensaver, but that's just silly in my opinion.
Interesting that the microsoft support link
Justin, I think your problem is different than this one. All your
problems occur while connected to the network.
--
likewise-open: allows lockout while disconnected
https://bugs.launchpad.net/bugs/314623
You received this bug notification because you are a member of Ubuntu
Server Team, which is
Thierry: i have not touched lwiauthd.conf or pam_lwidentity.conf, except
to turn on debugging in pam_lwidentity.conf
--
likewise-open: allows lockout while disconnected
https://bugs.launchpad.net/bugs/314623
You received this bug notification because you are a member of Ubuntu
Server Team, which
Public bug reported:
Binary package hint: likewise-open
On a machine joined to the domain with likewise-open, usernames are like
“DOMAIN\username”. When using kinit, it therefore tries to obtain a TGT
for domain\usern...@kerberosdomain. If likewise-open used only the
username instead of
Steps to duplicate:
1. join an AD domain using likewise-open.
2. username will be in the form DOMAIN\username
3. run 'kdestroy' to remove the current kerberos credentials cache
4. run 'kinit' to attempt to get new credentials
expected behaviour:
1. prompt for password.
encountered behaviour:
1.
Public bug reported:
I'm using libpam-krb5 with nss-ldap and nscd, and encountering a
segfault when I try to use 'su' to change to my own account, after
entering the correct password.
Apport doesn't run to process the segfault, or I'd be reporting the bug
with that utility.
The crashing command
I assigned this bug to this package because the segfault appears as
follows (from dmesg):
[ 1844.309499] su[6070]: segfault at 1be96c38 ip 7fd3a48c03c3 sp
7fffd10ab710 error 4 in libkrb5.so.3.3[7fd3a4874000+ae000]
Turning on debug in the krb5 pam system provides the following in
This is on karmic.
It all works fine for login; it's just su that has trouble. This is
just more-or-less default settings of nsswitch and PAM. PAM is entirely
as provided by pam-auth-update (except the addition of 'debug' to the
krb5 module), and nss is 'compat ldap' for passwd, group, and
Nope, su'ing to the current user. 'su - $USER', using the environment
variable. It does the same if I put the literal username, obviously.
File modes are 0600
--
segfault
https://bugs.launchpad.net/bugs/476069
You received this bug notification because you are a member of Ubuntu
Server Team,
** Changed in: krb5 (Ubuntu)
Status: Incomplete = New
--
segfault
https://bugs.launchpad.net/bugs/476069
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to krb5 in ubuntu.
--
Ubuntu-server-bugs mailing list
Public bug reported:
Binary package hint: likewise-open
Password caching has stopped working after upgrading to Lucid.
I can still join a domain and log in when connected to the domain, but
if I shut down and disconnect from the network, then I can no longer log
in after starting up again. If
If I then connect to a VPN which can reach the domain and restart lsassd
and netlogond, I can once again log in as myself. Caching does work as
long as lsassd continues running.
--
password caching no longer works
https://bugs.launchpad.net/bugs/509934
You received this bug notification because
Same problem here with a C640 and kernel 2.6.17-10-generic (and previous
kernels)
** Also affects: linux-source-2.6.17 (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
Ubuntu crash when connecting to port replicator (Dell Latitude D610)
https://launchpad.net/bugs/41091
--
Public bug reported:
There are many city selections in gweather which are missing the zone
tag, even though there is a relevant one for that location.
I can provide a patch for the Locations.xml if need be, at least for
Wisconsin.
** Affects: gnome-applets (Ubuntu)
Importance: Untriaged
Public bug reported:
The file Locations.xml is ridiculously huge, at 15MB.
Most of this seems to be taken up with the same name in different
languages for the same place. Why not just remove the language-
specific name tags where they match the default? This would bring a
huge decrease in file
Public bug reported:
The console will not show a login once X/gdm has started, if I start the
kernel with the default quiet/splash options. If I remove those
options, the console displays properly.
This is on a dell C640 laptop with an AT Radeon mobility M7 LW (Radeon
Mobility 7500), using the
Also, this problem only started showing up once I switched to this
kernel, hence the bug report is on the kernel.
--
console fails to display after X starts
https://launchpad.net/bugs/61103
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
This looks very relevant to the problem:
http://earth.google.com/support/bin/answer.py?answer=21456topic=1149
--
Google Earth Beta 4 does not display properly
https://launchpad.net/bugs/49782
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Ack, you're right. It still happens with the old kernel. My mistake.
Suggestions for determining where the problem lies?
--
console fails to display after X starts
https://launchpad.net/bugs/61103
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
kgpg indicates marginal trust with a red bar, and sorts it at the
bottom of the trust column, along with expired/revoked keys. It should
probably be sorted just below the trusted keys, and perhaps indicated
with a yellow bar.
Sorting should go:
Trusted
Marginal
None
Public bug reported:
The kernel modules won't build with kernel 2.6.17-4 using module-assistant:
CC [M]
/usr/src/modules/openafs/src/libafs/MODLOAD-2.6.17-4-686-MP/afs_analyze.o
In file included from /usr/src/modules/openafs/src/afs/afs_osi.h:443,
from
Public bug reported:
when trying to set up a new account and going through the wizard, if I
choose Server type: microsoft exchange then the only field I am given
to fill in is Username. If I fill this in, I cannot choose Forward.
** Affects: evolution (Ubuntu)
Importance: Untriaged
I see the following error at the console:
(evolution-2.8:8421): evolution-shell-WARNING **: Cannot activate
'OAFIID:GNOME_Evolution_Exchange_Component:2.8': Child process did not
give an error message, unknown failure occurred
If that plugin is the equivalent of launching exchange-connector-
Public bug reported:
Using the update manager crashes my X server, under dapper.
as long as nothing is displayed in the changes and description of the
update box, it is fine. As soon as there is something to be displayed
there, my X server crashes and restarts, bringing me back to the gdm
login
That doesn't enable any additional fields in the new account wizard
though.
--
New account wizard only displays username (exchange)
https://launchpad.net/bugs/52800
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Setting general.useragent.extra.firefox to Firefox/1.5.0.4 Gecko also
works, and that key is defined by default
--
latest firefox update breaks gmail
https://launchpad.net/bugs/52373
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
when I run 'passwd' with the following config in /etc/pam.d/passwd:
authrequiredpam_unix.so
account required pam_unix.so
password required pam_permit.so
session required pam_unix.so
...it does not prompt for a password, despite the auth line
I don't
Public bug reported:
this module currently does not renew the kerberos tgt when
authentication is performed via xscreensaver (nor what I presume to be
the equivalent, simply getting new credentials). If it did, it would be
much easier to use this while hiding the details of kerberos, and more
This is also true of chsh
--
chfn only understands /etc/passwd
https://launchpad.net/bugs/49604
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
One example I've found where I disagree irreconcilably with Musicbrainz,
is the Marilyn Manson track known as Spade or ♠.
I prefer the ♠ spelling, while MB prefers the Spade spelling because
they don't like to use Unicode in tags where it can be avoided. Thus I
prefer to use my info for myself,
is passwd not supposed to prompt for the old password before setting the
new password?
--
passwd ignores the pam auth section
https://launchpad.net/bugs/49603
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I'm trying to use pam_passwdqc, but I'd like for PAM to verify the old
password before trying to give me a new one.
As is, if I use passwdqc it will go, here's a new password, now what
was your old one?.
I tried to simplify it to the above test case, but perhaps I went too
far and too soon
No, I don't think this is at all related to PAM (the only thing PAM does
with chfn and chsh is authentication)
Surely though, this would be something that applies to any NSS source,
not just LDAP, right?
Also sound relevant to the Network Authentication specification.
--
chfn only understands
I use sloppy focus, but the problem occurs regardless of this setting.
--
gtk.Window.present()
https://launchpad.net/bugs/36485
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Attached is the patch to Locations.xml.in adding zones to Wisconsin
cities.
** Attachment added: Zones added to all Wisconsin cities in gweather's
Locations.xml.in
http://librarian.launchpad.net/4889898/Locations.xml.in.diff
--
gweather is missing zones
https://launchpad.net/bugs/61097
--
Where can I find or how can I create a copy of Ubuntu's cupsys package
with debugging enabled?
--
100% CPU when disk is full
https://launchpad.net/bugs/66612
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
It would be great if evince could display the document page size in the
Properties dialog.
** Affects: evince (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
Show page size
https://launchpad.net/bugs/67243
--
ubuntu-bugs mailing list
Public bug reported:
When duplex printing on paper larger than the document size (e.g. a 7×9
document page size printing on 8.5×11 page), it would be helpful if
evince would move alternating pages to the right so that they are
aligned properly with the text on the opposite side.
This bug may
Public bug reported:
Binary package hint: xserver-xorg-driver-ati
on my laptop the display dpi is detected incorrectly as 75×75.
It's actually closer to 90×90 at 1024×768. The screen is 11.25×8.5,
detected as 347mmx260mm according to xdpyinfo
** Affects: xorg (Ubuntu)
Importance:
Public bug reported:
If the disk becomes full, cupsd uses as much CPU as it can, doesn't
report an error, and the web service doesn't respond.
** Affects: cupsys (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
100% CPU when disk is full
https://launchpad.net/bugs/66612
--
What specific details do you want/need?
A list of cities which are missing the zone tag, with corresponding zone
value? a patch to Locations.xml?
--
gweather is missing zones
https://launchpad.net/bugs/61097
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I'm using Edgy. I still have the issue. Changing focus_mode has no
effect, raise_on_click is the key that affects this behavior.
--
gtk.Window.present()
https://launchpad.net/bugs/36485
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
/var is not a separate partition, so I can't answer your questions more
specifically. Your analysis sounds correct though. I am trying the
upstream-suggested gdb, and will report back here and upstream.
--
100% CPU when disk is full
https://launchpad.net/bugs/66612
--
ubuntu-bugs mailing
OK -- Here goes:
Freeing up space after cups starts using excessive CPU allows it to work
properly (It receives a SIGPIPE though when run under gdb). Here's the
backtrace at the point where it was using CPU:
backtrace:
#0 0xe410 in __kernel_vsyscall ()
#1 0xb7e994c3 in __write_nocancel ()
Edgy. It also happens with Openoffice.org.
So this likely belongs to cupsys?
Whether this belongs to cupsys depends on where the page size conversion
takes place -- does evince modify the page size to 8.5×11 before passing
it to cupsys, or does it pass it the 7×9 page and hope cupsys will do
Public bug reported:
Upon upgrading my desktop (a Shuttle SN85g4 version 2) to Edgy today, I
found that it would no longer boot.
On investigation, I found that it was hanging while Waiting for root
filesystem...
I scrolled back a bit and found (copied by hand, typographical errors
are possible,
Info provided.
** Changed in: evince (Ubuntu)
Status: Needs Info = Unconfirmed
--
duplex printing misaligned
https://launchpad.net/bugs/67247
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
when trying to use a smart card, gpg-agent tries to execute
/usr/lib/gnupg/pcsc-wrapper instead of /usr/lib/gnupg2/pcsc-wrapper
** Changed in: gnupg2 (Ubuntu)
Status: Unconfirmed = Confirmed
--
bad file names used by scdaemon and opensc-wrapper
https://launchpad.net/bugs/68047
--
Oh, and if it's not clear from the above, I'm using a SATA drive
attached to ata1.
--
fails to mount root filesystem on Shuttle SN85g4(v2)
https://launchpad.net/bugs/69356
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
This is still a problem in Edgy final.
lspci output:
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host
Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge
(rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub
I don't have this option. I also don't have an nforce3 chipset. See
also my previous comment that this is a different problem than bug
#37055. If I plug external speakers into the headphone jack on the
laptop, the internal speakers are muted properly.
But if I plug them into the headphone jack
No, that bug says that the speakers aren't muted when headphones are
plugged in directly to the laptop.
This one says that the port replicator headphone jack doesn't work.
Also, the laptop model is completely different.
--
Dell C510 port replicator headphone jack
** Bug 48607 has been marked a duplicate of this bug
--
ERROR: cpu exception in dosemu code outside of VM86()!
https://launchpad.net/bugs/52857
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
*** This bug is a duplicate of bug 52857 ***
** This bug has been marked a duplicate of bug 52857
ERROR: cpu exception in dosemu code outside of VM86()!
--
dosemu-freedos does not work out of the box.
https://launchpad.net/bugs/48607
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
*** This bug is a duplicate of bug 61718 ***
via Ctrl-Alt-F1 through Ctrl-Alt-F6
--
console fails to display after X starts
https://launchpad.net/bugs/61103
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: totem-gstreamer
Totem cannot play video of type x-ati-vcr (fourcc appears to be VCR2).
When it tries, it displays at the console, ** Message: Missing plugin:
gstreamer|0.10|totem-gstreamer|ATI VCR 2 decoder|decoder-video/x-ati-
vcr, vcrversion=(int)2
Public bug reported:
Binary package hint: totem
when totem-gstreamer encounters a video codec which it doesn't
understand, it offers to use gstreamer-codec-installer to install a
codec. Unfortunately, it never displays what codec is to be searched
for, in order to facilitate the situation where
http://web.teamthicko.com/andy/andy2.avi
--
totem doesn't understand video type video/x-ati-vcr
https://bugs.launchpad.net/bugs/293222
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Install the packages libavcodec-unstripped-51, libavdevice-
unstripped-52, libavformat-unstripped-52, libavutil-unstripped-49,
libpostproc-unstripped-51, and libswscale-unstripped-0 -- or at least
whichever of those you have the regular version installed currently.
Intuitive, no?
Unfortunately,
** Also affects: cmus (Ubuntu)
Importance: Undecided
Status: New
** Also affects: ffmpeg-debian (Ubuntu)
Importance: Undecided
Status: New
** Also affects: idjc (Ubuntu)
Importance: Undecided
Status: New
** Also affects: libdlna (Ubuntu)
Importance: Undecided
bug #289600 was already open for gpac. I've modified it to also apply
to the other packages where this is a problem.
--
Missing aac encoding and xvid support
https://bugs.launchpad.net/bugs/285540
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
ffmpeg-debian's ffmpeg-dbg depends on the stripped variants only.
libavformat-dev depends on libavformat52 only. libavcodec-dev depends
on libavcodec51 only. libavdevice-dev depends on libavdevice52 only.
libavutil-dev depends on libavutil49 only. libpostproc-dev depends on
libpostproc51 only.
Are you telling me that it's reasonable and intended that in order to
use the libs I need to install the unstripped variants (bug #285540),
but in order to compile against those libs, I need to uninstall the
unstripped variants and install the stripped variants?
I, er, disagree.
--
Should
Would it have been so hard to check, or even, god forbid, /ask/ if it
was still a problem in Intrepid?
Because it is.
** Changed in: aptitude (Ubuntu)
Status: Invalid = New
--
aptitude: PgDn on 'update' screen moves to end
https://bugs.launchpad.net/bugs/106364
You received this bug
Actually it is a pain to update my reports. I am subscribed to 134
tickets. Checking them all and entering yup, this is still a problem
periodically is not a good use of my time.
--
aptitude: PgDn on 'update' screen moves to end
https://bugs.launchpad.net/bugs/106364
You received this bug
Information provided.
** Changed in: udev (Ubuntu)
Status: Incomplete = New
--
root won't mount by UUID, device doesn't exist
https://bugs.launchpad.net/bugs/147957
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
movement? I have no idea whether this patch has been applied, if
that's what you mean.
** Changed in: smbldap-tools (Ubuntu)
Status: Incomplete = New
--
smbldap-useradd sets bad objectclasses for machine accounts
https://bugs.launchpad.net/bugs/105326
You received this bug notification
Looks like it was fixed upstream 2007-07-06.
** Changed in: smbldap-tools (Ubuntu)
Status: New = Fix Committed
--
smbldap-useradd sets bad objectclasses for machine accounts
https://bugs.launchpad.net/bugs/105326
You received this bug notification because you are a member of Ubuntu
Bugs,
Looks like it was fixed upstream 2007-07-06.
** Changed in: smbldap-tools (Ubuntu)
Status: Fix Committed = Fix Released
--
smbldap-useradd sets bad objectclasses for machine accounts
https://bugs.launchpad.net/bugs/105326
You received this bug notification because you are a member of
I cannot test the version in Intrepid due to bug #110278. The version
in Herbert Straub's PPA does not have this problem.
--
no longer possible to store hashed password
https://bugs.launchpad.net/bugs/137578
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Seems to be fine now, in Intrepid.
** Changed in: gnome-media (Ubuntu)
Status: Triaged = Fix Released
--
gnome-audio-profiles-properties edit window gradually resizes with AAC profile
https://bugs.launchpad.net/bugs/87360
You received this bug notification because you are a member of
It may be worth noting that connecting a speaker to the 'base jack cuts
off the audio from the built-in speakers.
--
Dell latitude X300: No audio from mediabase headphone jack
https://bugs.launchpad.net/bugs/277303
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Description changed:
Binary package hint: mozplugger
For video sites that play a sequence of videos using quicktime
(including mp4), the sequence is described using an embed tag with
qtnext attributes. For example:
EMBED SRC=nameof.mov WIDTH=200 HEIGHT=240
Still present in Intrepid too.
--
hostname -f does not return a proper FQDN
https://bugs.launchpad.net/bugs/8980
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
This is still a problem in empathy 2.24.0.
--
empathy: cannot add account.
https://bugs.launchpad.net/bugs/118800
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
Binary package hint: mplayer
Running at the console, mplayer tries, and fails, to use the x11 video
driver. It would be better if it tried to use other drivers, like fbdev
if it's available, or svga, or aalib as a last resort.
** Affects: mplayer (Ubuntu)
Importance:
This also happens at the console, even with screen size larger than
80×25.
--
video output aalib only displays the left hand side of the video
https://bugs.launchpad.net/bugs/185771
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I really don't think it is. That one seems to be about (automatically)
checking for updated drive labels.
This one is not related to changing media.
If it is a duplicate, it's more likely to be of bug #197954, except that
one is in relation to floppy drives and merely accessing them rather
than
Public bug reported:
Binary package hint: totem-xine
Totem is unable to access the chapters of Matroska files. The
Next/Previous chapter menu options are disabled.
** Affects: totem (Ubuntu)
Importance: Undecided
Status: New
--
totem: can't skip chapters in matroska files
I can no longer reproduce this problem. I'll re-open the bug if I find
later that I can.
** Changed in: gvfs (Ubuntu)
Status: Incomplete = Invalid
--
nautilus rescan of removable media fails
https://bugs.launchpad.net/bugs/288374
You received this bug notification because you are a
On further examination this happens only with some files.
The only difference I can see between the one file I have that works,
and the rest, is that the non-working ones have vobsub subtitles, and
the working one has SSA subtitles.
I'll try converting one of the vobsub ones to SSA and see if
Changing the subtitles format did not help.
--
mplayer: can't skip to chapter with time code of 00:00:00.0 in Matroska files
https://bugs.launchpad.net/bugs/288532
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
I've attached the output from mkvinfo on a test file which didn't work.
With this file:
Pressing '!' any time before chapter 3 will seek approximately 3-5 seconds
ahead.
** Attachment added: mkvinfo output of a file that doesn't work
http://launchpadlibrarian.net/18951056/notworking.txt
--
I've attached the output from mkvinfo on a test file which did work.
With this file, previous and next chapter work as expected.
** Attachment added: mkvinfo output of a file that works
http://launchpadlibrarian.net/18951081/working.txt
--
mplayer: can't skip to chapter with time code of
** Summary changed:
- mplayer: can't skip to chapter with time code of 00:00:00.0 in Matroska files
+ mplayer: can't skip to first chapter in some matroska files
** Description changed:
- If a chapter is defined as having a starting timecode of 00:00:00.0 in a
- Matroska file, mplayer is unable
Yes.
Create a matroska file with chapters.
Load it in totem.
Note that the chapter buttons don't work.
Attached please find a matroska file containing 5 chapters.
** Attachment added: Sample video with chapters
I'm talking about the screen displayed when you press 'u' to update, and
it shows the status of the Packages files etc. being downloaded. I'm
sure the list is still growing, but that shouldn't affect the pgup/pgdn
functionality.
--
aptitude: PgDn on 'update' screen moves to end
Well, when the list is fully loaded, it goes back to the regular package
display (unless there was an error, of course). The summary is correct
though.
And yes, I know this is a very very minor bug.
--
aptitude: PgDn on 'update' screen moves to end
https://bugs.launchpad.net/bugs/106364
You
Yes, this is still a problem in Intrepid.
--
xterm terminfo file uses wrong mode by default
https://bugs.launchpad.net/bugs/148866
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Ah, thank you. I did not realize they were separate packages.
--
Missing aac encoding and xvid support
https://bugs.launchpad.net/bugs/285540
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Will this fix be going in to the official packages?
--
Missing aac encoding and xvid support
https://bugs.launchpad.net/bugs/285540
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
The D500 now detects the ethernet when hotplugged the first time.
However, when undocking by pressing the undock button, waiting for the
eject light to go green, and ejecting, and then redocking, it sometimes
hangs. Should I open a new bug for this one snarkor just consider the
topic of this bug
This is still a problem in kgpg 2.0.0/kde 4.1.2
** Bug watch added: KDE Bug Tracking System #173328
http://bugs.kde.org/show_bug.cgi?id=173328
** Also affects: kdeutils via
http://bugs.kde.org/show_bug.cgi?id=173328
Importance: Unknown
Status: Unknown
--
kgpg sorts trust
1 - 100 of 910 matches
Mail list logo