I have totem deinterlacing by changing the default gstreamer video sink
from autovideosink to deinterlace ! autovideosink. You can do it
using Alt+F2 and executing gconf-editor and the go to
/system/gstreamer/0.10/default and change videosrc value to
deinterlace ! autovideosink
Nowadays
The tff property
tff GstDeinterlaceFieldLayout : Read / Write
Deinterlace top field first.
Default value: Auto detection
OK GStreamer seems to have autodetecting of tff since 0.10.17, also
there are some methods to choose from:
The method property
method
The deinterlace method are ports of the DScale Tvtime ones, but all of
the seems to be poor comparing for example with the vlc's blend, that
gives more accurated deinterlacing. For example with the Shaggy - Angel
song video I have from a .vob from a DVD the inital animations is not
properly
I have seen what you say, also deinterlace messes non interlaced videos,
at leats in very noticiable with 1080p videos. Thanks for the info.
--
Totem Fails To Deinterlace
https://bugs.launchpad.net/bugs/257818
You received this bug notification because you are a member of Ubuntu
Bugs, which is
*** This bug is a duplicate of bug 363682 ***
https://bugs.launchpad.net/bugs/363682
** This bug has been marked a duplicate of bug 363682
cx24116 firmware doesn't load - firmware corrupt
--
Hauppauge DVB-S2 PCI Firmware Corrupt
https://bugs.launchpad.net/bugs/495905
You received this
Corrected duplicate bug, What could this be a duplicate of bug posted 5
hoirs ago. The other one is the duplicate and that's why the
conversation is here.
** This bug is no longer a duplicate of bug 495905
Hauppauge DVB-S2 PCI Firmware Corrupt
--
cx24116 firmware doesn't load - firmware
*** This bug is a duplicate of bug 363682 ***
https://bugs.launchpad.net/bugs/363682
** Description changed:
The firmware file dvb-fe-cx24116.fw - MD5 Checksum
9950fe612d47217e6068f7141de225b0 is corrupt.
Looks like the firmware was extracted from 88x_2_122_26109_WHQL.zip
using
The Nova T 500 as DVB-S is purely a MythTV bug, is solved at least in
development releases.
For the DVB-S check that your anthena is well oriented.
--
cx24116 firmware doesn't load - firmware corrupt
https://bugs.launchpad.net/bugs/363682
You received this bug notification because you are a
This is because usually Realtek chips supports to be used un 6ch o 8ch mode and
this is controlled by alsa and it's not implemented in PulseAudio. As you have
Karmic you need to go to console and execute:
# alsamixer
Then you have to scroll to the Channel Mode Switch going all to the right, and
Sometime - 2 years.
The incorrect state seems to be a very vague excuse considering the
usual way to manage the bugs in ubuntu. For example,
https://bugs.launchpad.net/ubuntu/+source/mldonkey/+bug/176895 Hardy is
already in support time because it's LTS state, bug marked as fixed
becuase, it's
I know that you are normal users, but, with the ability to post changes
in the packages, so with users I meant that the problem was solved and
the only thing to do was to apply it.
The other bug I pointed wasn't solved because the importance was low,
and the effects of it were all the apps that
*** This bug is a duplicate of bug 554172 ***
https://bugs.launchpad.net/bugs/554172
** This bug has been marked a duplicate of bug 554172
cups not starting at boot
--
Cups service is not startet during boot on fresh 10.04 install
https://bugs.launchpad.net/bugs/576241
You received this
*** This bug is a duplicate of bug 554172 ***
https://bugs.launchpad.net/bugs/554172
** This bug has been marked a duplicate of bug 554172
cups not starting at boot
--
lucid: since last update no printer in printer menu. impossible to install
printer because menu is greyed
Well solved in karmic, but what about other releases? The same in
another bug, but without response since half a year, look the second
comment https://bugs.launchpad.net/ubuntu/+source/ocaml/+bug/215000.
What is the sense to have LTS releases if they don't get know fixes?
Hardy in alredy supported
So then as I said the term LTS in ubuntu releases are only three letter
to make the release name more longer. Also Jaunty is already supported.
And also, this bug was reported with Feisty, well is compressible that
if the next versions support date if off and a fix haven't released at
time, they
Ocaml bug consequence no 64 bits application written in ocaml is
possible to be run properly, this is not an high-impact problem?
This bug, prevents an user from setting a less aggressive apm and in
some hard-drive models could prevent from stopping his/her hard drives
and, making impossible to
Nick Latheron you should have db-t also working if the firmware is loaded
correctly. I think your problem is related to the use of an application
compilant with dvb 3.x and not with the new dvb 4.x that supports multiple
frontends. To workaround this you can do:
sudo mkdir /dev/dvb/adapter1
In the new karmic release the dvb firmwares have been promoted to a new
package linux-firmware-nonfree
** Package changed: linux-firmware (Ubuntu) = linux-firmware-nonfree
(Ubuntu)
--
cx24116 firmware doesn't load - firmware corrupt
https://bugs.launchpad.net/bugs/363682
You received this bug
There is a comment in wikipedia's discussion about this:
http://en.wikipedia.org/wiki/Talk:Disk_encryption_theory#Issues_with_XTS
Issues with XTS
There is also an issue about the size of the filesystem encrypted with
the support of XTS. This is discussed here:
*** This bug is a duplicate of bug 497299 ***
https://bugs.launchpad.net/bugs/497299
** This bug is no longer a duplicate of bug 554172
cups not starting at boot
** This bug has been marked a duplicate of bug 497299
upstart not starting init-scripts (event net-device-up IFACE=lo
*** This bug is a duplicate of bug 497299 ***
https://bugs.launchpad.net/bugs/497299
** This bug is no longer a duplicate of bug 554172
cups not starting at boot
** This bug has been marked a duplicate of bug 497299
upstart not starting init-scripts (event net-device-up IFACE=lo
*** This bug is a duplicate of bug 497299 ***
https://bugs.launchpad.net/bugs/497299
** This bug has been marked a duplicate of bug 497299
upstart not starting init-scripts (event net-device-up IFACE=lo missing)
--
cups not starting at boot
https://bugs.launchpad.net/bugs/554172
You
Freshs installation of Lucid lacks of the fix, only upgrades from
previous versions solve this. This produce freshs installations of lucid
not being able to use printers, this should be fixed as soon as
possible.
Thanks.
** Changed in: ifupdown (Ubuntu Lucid)
Status: Fix Released =
I said that based on
https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/576241/comments/3
but I can see /etc/network/interfaces right in my fresh installation,
anyway cups is not started at boot time, but seems to be caused by
another thing.
--
upstart not starting init-scripts (event
Sorry about the dupicate state, I put it on all the cups not starting
bugs on lucid after reading someone having it running at boot by only
creating the loopback interface.
Now with loopback interface at default in ifupdown seems that we are
still lacking cups at boot.
--
cups not starting at
Jens Gräf this is a know solved bug (you can see it in the kernel bug
tracker), with nowadays some old versions of nvidia driver and some old
versions of linux kernel the sound stops working, no sound from
integrated sound card, no sound from pci card, no sound at all.
The easiest way to resolve
Sure because I started the bug and the solution was the one I mention,
the only way the bug are you describing is the same like is, is if in
the kernel version and in the nvidia driver version they fixed the edid
of some tvs like the one I have for example.
--
No sound while in x display with
Fabrice that is not the solution, the solution has been made by the
users but is needed to be included. There are 3rd party themes that use
this engine, so removal shouldn't be a solution.
--
[intrepid] gtk2-engines-ubuntulooks can't be installed
https://bugs.launchpad.net/bugs/285417
You
This is going to be also in lucid LTS or is one bug more for the list of
important bugs but no so important for canonical to be in actual
supported releases and only in the actual in development one.
--
Totem Fails To Deinterlace
https://bugs.launchpad.net/bugs/257818
You received this bug
I know, even a totally blockers bugs like in hardy impossibility to make
working apps with ocaml 64 (if you compile an app with the ocaml
included in ubuntu hardy, youru application will crash before running a
little time), in canonical is not considered a important bug, and ocaml
is not part of
Someones say one way to go, others another. The real way to go of
canonical, at least the one they said in other bugs, is to backport
fixes for critical bugs. This is not a critical bug in anyway but you
can search for the ocaml hardy lstd bug and tell me if it's critical or
not.
--
Totem Fails
Don't know why you mention the random all before as is irrelevant for
this issue, entire partition should be random filled with all cipher
blocks.
No, is not a XTS unique problem but is not a problem of using AES, the
problem is in all XOR-Encryption(XE)-based tweakable block cipher like
XTS.
I
32 matches
Mail list logo
