v/snd/controlC0: mark 1592 F pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'SB'/'HDA ATI SB at 0xc050 irq 16'
Mixer name : 'Realtek ALC861-VD'
Components : 'HDA:10ec0862,173410fb,0011
HDA:10573055,
** Attachment added: "AlsaDevices.txt"
http://launchpadlibrarian.net/33559824/AlsaDevices.txt
** Attachment added: "AplayDevices.txt"
http://launchpadlibrarian.net/33559825/AplayDevices.txt
** Attachment added: "ArecordDevices.txt"
http://launchpadlibrarian.net/33559826/ArecordDevices.t
I don't think this is a regression. This driver was poor in jaunty as
well for me:
01:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network
Adapter (rev 01)
Subsystem: D-Link
Public bug reported:
Binary package hint: eclipse-cdt
Hello,
I installed the package eclipse-cdt. But in eclipse I can't create a c/c++
project. There is simply no entry in the new menu.
Does anyone have the same problem?
(Using Karmic beta with current updates...)
Regards, Mark
** Af
*** This bug is a duplicate of bug 163739 ***
https://bugs.launchpad.net/bugs/163739
** This bug has been marked a duplicate of bug 163739
Upgrade eclipse-cdt to 6.0.1
--
eclipse-cdt installed but not available in eclipse
https://bugs.launchpad.net/bugs/452913
You received this bug notifi
Tested with backports with two torrents for an hour was all fine, then
complete system lockup. Had to reset. This also happened with backports
on the previous kernel.
--
ath9k disassociates/reassociates a lot
https://bugs.launchpad.net/bugs/414560
You received this bug notification because you ar
Public bug reported:
I have 2 cards. Whichever one is set as primary in the BIOS will work. The
other fails with Cannot read V_BIOS (3) Input/output error.
The nvidia card has been tried with both the nv and nvidia drivers. The SiS
card only with sis driver.
Fail with xserver on Ubuntu 9.04 (x
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/31908798/xorg.conf
--
xserver cannot read V_BIOS of second graphics card
https://bugs.launchpad.net/bugs/430919
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu
** Attachment added: "Xorg.0.log with SiS card as primary"
http://launchpadlibrarian.net/31908875/Xorg.0.sis
--
xserver cannot read V_BIOS of second graphics card
https://bugs.launchpad.net/bugs/430919
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
** Attachment added: "Xorg.0.log with nvidia card as primary"
http://launchpadlibrarian.net/31908863/Xorg.0.nv
--
xserver cannot read V_BIOS of second graphics card
https://bugs.launchpad.net/bugs/430919
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
Doesn't matter anyways. I was just being brain-dead. I failed to
notice the version od Xulrunner (and Firefox) was from a nightly, pre-
release build.
** Summary changed:
- adept offers update of xulrunner-1.9.1 to 1.9.1.4 EVERY day
+ IGNORE: adept offers update of xulrunner-1.9.1 to 1.9.1.4
I recently upgraded to karmic 64bit from 32bit and the problem vanished.
Using the stock 64bit kernel the lid switch is working properly, yet did
not work in 32bit.
--
/proc/acpi/button/lid/*/state always says "open"
https://bugs.launchpad.net/bugs/89860
You received this bug notification because
Public bug reported:
Copying to and from Clipboard does not work using this key-combinations
in OpenOffice 3.1.1 (from Ubuntu PPAs) using Kubuntu 9.04 with KDE 4.3.1
and qt 4.5.2. However Clipboard works using Shift-ENF and Shift-INSERT.
It may be possible, that this bug is related to recent bugs
In some way it must involve OpenOffice itself, because within KDE it
works fine.
--
Strg-X Strg-C Strg-V not working
https://bugs.launchpad.net/bugs/432575
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubun
Public bug reported:
Binary package hint: freecol
I was having extremely slow performance from freecol, as somebody else
described in this thread:
http://sourceforge.net/projects/freecol/forums/forum/141201/topic/3269853
"Sometimes when I click another part of the map it takes a really long time
Public bug reported:
Binary package hint: gdm
Created original user in UNR 9.10 with username administrator and real
name "Someone & Someone else".
The login screen is expected to show the real name "Someone & Someone
else". Instead, the login screen confusingly shows the real name as
"Others...
Is there any workaround for this bug yet? My thinkpad R50e is nearly
unusable at the moment. It runs fine with Windows still, but using
Kubuntu Karmic with all the latest updates it shuts down after some time
without any warning, resulting in data loss. Is there any way to turn
thermal control off?
BTW: I have installed Sidux Linux (which is Debian based too) as a
parallel installation. It runs with Kernel 2.6.32 and so far there are
no problems. Touching the case, the system is definitely much cooler
even after running a full day, then running with Karmic. I do not know,
what the reason for
I loaded ubuntu on my toshiba laptop a few days ago. The machine has an nvidia
graphics card which I had to download the hardware drivers for. After 3 days
while trying TUX racer, I set the graphics higher than the card could support.
The machine locked up and when I rebooted I believe it was tr
black screen and no sound. The "properties" tag in movieplayer shows a
duration of 0 seconds.
Strangely a few of the shorter files do show icons and do play, but
first try to find codec "GStreamer element dvdspu". That fails, then
they seem to play ok.
Grateful for any help yo
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/37423151/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/37423152/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/37423153/ProcStatus.txt
** Attachm
Just a short update: System is now running for more than a day using
Sidux and Ubuntu-Vanilla-Kernal. Now unexpected shutdown until now.
--
regression in karmic thermal control
https://bugs.launchpad.net/bugs/432670
You received this bug notification because you are a member of Ubuntu
Bugs, which
I have this poroblem too. Trying to upload files via MU (Firefox 3.5.7)
on latest Ubuntu 64bit and it not only doesn't work - it pretty much
hoses my whole internet connection. I think it's because it's uploading
(with all the bandwidth taken up) but it's not showing that it's
uploading. This probl
I have a eeepc1005HAG/HGO with an *internal* Huawei which also identifies
itself as 620-model
lsusb:
Bus 001 Device 006: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
I have kernel 2.6.31-18-generic #55-Ubuntu running. With Windows
everything works fine, but with Kubuntu it does not w
** Attachment added: "umtsmon output"
http://launchpadlibrarian.net/37999732/umtsmon.txt
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bug
I have made some progress with (K)Ubuntu. Unfortunately I do not know what
exactly did the trick. First of all I noticed that the cpu-temperature drops
significantly (15-20 degrees) when I detach the battery. Then I also did some
updates and activated Thinkpad fan control as it is described here
I am astonished that this problem is reported so often and still
unattented. Of course physical access to a machine makes it easy for an
intruder to access and change your files. But still it should not be
made to easy. Otherwise why are there passwords anyway for people who
access the machine loca
With from Rolf, I have installed the Kubuntu Vanilla Kernel 2.6.33-999 from
today on Sidux. It has been running nearly 4 hours (on rather high system load)
now, which is a very long time compared to the maximum of 1 hour when I was
running Karmic. I am not a technical expert, but as I understand
Public bug reported:
Binary package hint: openoffice.org
This bug concerns the KDE-adaptions of openoffice.org, may be gnome to,
I do not know. In a fresh installation the icon size is set to "big".
This setting lets openoffice ignore the standard icon size of KDE from
systemsettings. I believe t
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/37182535/Dependencies.txt
--
icon size setting does not honour KDE setting automatically
https://bugs.launchpad.net/bugs/500325
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Not fixed in backports due to the random lockups which occur
** Changed in: linux-backports-modules-2.6.31 (Ubuntu)
Status: Fix Released => Confirmed
--
ath9k disassociates/reassociates a lot
https://bugs.launchpad.net/bugs/414560
You received this bug notification because you are a membe
I've been having this problem too, on my Amilo LI1718 (Intel chipset
variant of the X200M).
Just clean installed the Ubuntu RC and it took 7 attempts for xsplash to
kick in (requiring a powering off and on of the laptop every time), and
suspend/resume still doesn't work.
Joy...
--
[RC410] Xpres
Public bug reported:
Binary package hint: postfix
.
ProblemType: Package
Architecture: i386
Date: Sat Oct 24 21:51:46 2009
DistroRelease: Ubuntu 9.10
ErrorMessage:
ErrorMessage: subprocess installed post-installation script returned error
exit status 75
Package: postfix 2.6.5-3
ProcVersionSign
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34345059/Dependencies.txt
** Attachment added: "VarLogDistupgradeAptlog.gz"
http://launchpadlibrarian.net/34345060/VarLogDistupgradeAptlog.gz
** Attachment added: "VarLogDistupgradeApttermlog.gz"
http://launchpadlibra
Public bug reported:
I have a Lenovo X200 thinkpad laptop PC with a built in AT&T Mobile
Connect card. When I first boot up, Network manager sees the card and I
am able to connect with it. However, if I suspect and come out of
suspend, network manager no longer sees the card and I'm required to
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34948705/Dependencies.txt
** Attachment added: "XsessionErrors.txt"
http://launchpadlibrarian.net/34948706/XsessionErrors.txt
--
Loosing AT&T Mobile WAN Card upon Unsuspend
https://bugs.launchpad.net/bugs/470608
You rec
Public bug reported:
Description:Ubuntu karmic (development branch)
Release:9.10
Linux mark-laptop 2.6.31-14-generic #46-Ubuntu SMP Tue Oct 13 16:47:59 UTC 2009
i686 GNU/Linux
When laptop wakes up from suspend there is a kernel crash
ProblemType: Bug
Architecture: i386
** Attachment added: "AlsaDevices.txt"
http://launchpadlibrarian.net/33912625/AlsaDevices.txt
** Attachment added: "AplayDevices.txt"
http://launchpadlibrarian.net/33912626/AplayDevices.txt
** Attachment added: "ArecordDevices.txt"
http://launchpadlibrarian.net/33912627/ArecordDevices.t
Public bug reported:
Binary package hint: mediawiki
When upgrading from ubuntu 9.04 to ubuntu 9.10, the upgrade process
failed when trying to upgrade mediawiki 1:1.15.0-1.1.
ProblemType: Package
AptOrdering: mediawiki: Configure
Architecture: amd64
Date: Fri Oct 30 16:23:11 2009
DistroRelease: U
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34696612/Dependencies.txt
** Attachment added: "Dmesg.txt"
http://launchpadlibrarian.net/34696613/Dmesg.txt
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/34696614/DpkgTerminalLog.txt
--
pa
problem solved. I think the problem was caused by a missing file of the
mediawiki package before upgrading; hence the apt-get install mediawiki
didn't work.
--
package mediawiki 1:1.15.0-1.1 failed to install/upgrade: subprocess installed
post-installation script returned error exit status 1
htt
I have a very similar problem. Using Ubuntu 9.04 gnucash and aqbanking
worked fine, and I was able to download transactions from my bank. After
upgrading to 9.10, the package manager decided to (auto)remove several
aqbanking libraries and packages. Now, I cannot connect to my bank
anymore.
Actuall
Issue still there in Ubuntu 9.10
Each time you ask it to start the message keeps re-appearing and so
willowng won't start. Tried with gksudo willowng-config and still had
the error.
** Also affects: willowng (Ubuntu)
Importance: Undecided
Status: New
--
willowng will not start
https:
After going through the whole text-mode install process, Dapper 6.0.6
rebooted and snagged me on a bug reported months ago.
https://launchpad.net/distros/ubuntu/+source/linux-
source-2.6.15/+bug/24521
If you use bluetooth input devices, don't waste time with Ubuntu for
now.
--
Dapper Release Ca
Used text installer for Dapper 6.0.6 final.
The boot prompt accepts bluetooth keyboard input (l for Linux, x for Mac
OS X, and all that). Bootup sequence is normal. At login screen,
Dapper fails to detect keyboard/mouse input.
Note the silliness here, as the little bootloader manages to handle
After following all advice about removing bluez and turning sound off:
our test unit is still completely unusable.
We apparently have the worst of all possible worlds - a G5 system with
the known sound and power (fan) problems, but also the bluetooth
problems.
The root prompt from "Linux single"
*** This bug is a duplicate of bug 30557 ***
I just installed updates today, 6/15 and now both my boxes are constant
15% with both 686 and 386 kernels.
Mark
--
CPU usage very high with no running tasks using it
https://launchpad.net/bugs/30570
--
ubuntu-bugs mailing list
ubuntu-bugs
On a vanilla Ubuntu Server Installation (20.04) I always get multiple errors
of:
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device).
This problem still seems to exist.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribe
Public bug reported:
My PC won't resume from suspend.
When i try resumig it by pressing a button on keyboard or PC i get a not
working screen,
though i can hear the pc work.
The function works fine on Debian Buster (10.9.0).
The function's a 'must have' for me.
ProblemType: Bug
DistroRelease: U
How do i do that?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1929425
Title:
Suspend/resume problem
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+
would something like
https://www.amazon.com/dp/B07J5WFPXX/ref=cm_sw_r_cp_apa_fabt1_IciRFb2QMGBDJ
work?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1838151
Title:
Poor quality audio with modern Blu
Thank you for the advice! I'm going to purchase and see if it works with
my setup.👍
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1838151
Title:
Poor quality audio with modern Bluetooth headsets in
Public bug reported:
fresh install of 20.04.1. Setting up FDE per
https://help.ubuntu.com/community/Full_Disk_Encryption_Howto_2019. This
is my 4th system following those directions (2 devboxes, one other
laptop), I'm reasonably confident the steps are sound & I followed them
correctly.
after co
I am seeing a similar reproduction, but earlier at the FDE passphrase
screen. My system apparently (at least under liveusb) reports
/sys/class/dmi/id/chassis_type==31
Seems related, but i've posted a new bug due to the chassis type being
"correct" (?)
https://bugs.launchpad.net/ubuntu/+source/lin
Already posted in AskUbuntu: https://askubuntu.com/questions/1302234
/keyboard-not-working-at-initial-fde-passphrase-screen-20-04-1
However, as a developer myself, I feel this is mostly** unambiguously a
bug*** and hope it can be considered as such.
If I can get a timely response (specifically,
I'm suffering this after this update too. It is the latest in a
depressingly long list of Ubuntu updates that have ed up my system.
You really *need* better testing of updates. If you can't improve the
testing then there needs to be a way to roll-back the system to before
an update.
Instead of
Daniel,
Which part of what I wrote you do you another bug about? The fundamental
issue, gdm doesn't work, hence no login screen, after the latest
kernel/gdm update is the same as this bug, so why create a duplicate?
The previous issues were with past distribution versions so filing a bug
is not u
> which solves the problem
I don't consider switching to lightdm to be a solution the problem. It's a
workaround.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1779476
Title:
Ubuntu 18.04: gdm3 do
Turns out lightdm is working after all, almost. If you wait patiently
when the black screen appears after the Ubuntu 5 dots boot screen,
possibly as much as 4 minutes, then the desktop eventually appears,
albeit somewhat messed up, with a message box asking you to "unlock the
login keychain" becaus
Public bug reported:
There have been quite a few releases of mediathekview (including
bugfixes). It would be great if the package could be updated to 13.2.1
** Affects: mediathekview (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a
Public bug reported:
Since a few days evince does not start anymore
I tried reinstalling it but didn't fix it.
If i type evince in terminal I get:
(evince:10976): dbind-WARNING **: 12:53:45.012: Error retrieving accessibility
bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.
When will this fix be completed in Ubuntu. I am running 18.04 and,
because of this bug, can't use screen sharing when using Wayland.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1724572
Title:
vino
*** This bug is a duplicate of bug 1685794 ***
https://bugs.launchpad.net/bugs/1685794
Easy Solution=
>From the Old Version, use =
sudo apt-get update
sudo do-release-upgrade
Boot speed will be the same as the old version speed
do not install with CD or USB
--
You received this bug notifi
Public bug reported:
tlp: 1.1-2ubuntu1 on Ubuntu bionic 18.04 LTS
I have a notebook with nvme SSD, the version in Ubuntu repositories does not
detect the disk:
Steps to check:
# tlp-stat -d
--- TLP 1.1
+++ Storage Devices
+++ AHCI Link Power Managem
** Description changed:
Since a few days evince does not start anymore
I tried reinstalling it but didn't fix it.
If i type evince in terminal I get:
(evince:10976): dbind-WARNING **: 12:53:45.012: Error retrieving
accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown
The log flooding (in my case ~/.cache/upstart/Unity7.log) is a
*secondary* problem. The primary problem is the breakage in Python ssl &
crypto that causes several things to not work in Kodi and is reflected
in the error messages.
Does pyopenssl 16.2 fix the primary issue?
--
You received this bu
I am currently running Ubuntu 16.04, python-openssl 0.15.1-2build1,
python-cryptography 1.2.3-1ubuntu0.1 and Kodi 17.3.
The problem was initially introduced by a regular software update (by
Software Updater). I found some instructions that I followed, not those
here, which involved installing or r
Are there instructions on supporting CONFIG_IDE_TASK_IOCTL for 16.04
LTS?
Same thing happens for hdparm v9.48
SG_IO: bad/missing sense data, sb[]: f0 00 01 00 50 40 00 0a 00 00 00 00 00 1d
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
The running kernel lacks CONFIG_IDE_TASK_IOCTL suppo
Also breaks pipenv https://github.com/pypa/pipenv/issues/1425, and I
can't think of a workaround.
** Bug watch added: github.com/pypa/pipenv/issues #1425
https://github.com/pypa/pipenv/issues/1425
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscrib
Does this belong upstream? https://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=871790
** Bug watch added: Debian Bug tracker #871790
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=871790
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
This is an amazing bug trail! A lot has been done and @Timo, thanks for the
work so far.
I have an update that might help.
I have 2 laptops, a ASUS and a Lenovo. They both had the issue.
I did a reinstall of Ubuntu 16.04 on the Lenovo keeping the home folder. First
I had the "no launcher problem
o use Windows and
that was no fun.
Cheers, Mark
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1735594
Title:
[regression] compiz crashes after Mesa upgrade
To manage notifications about this bug
If this only happens on Windows 2003, I don't see it getting fixed given
that it's an end of life product. I have no issues with rdesktop to
Windows 2008 upwards with rdesktop 1.8.3.
On 02/05/18 20:56, RH wrote:
> I have just upgraded to Ubuntu 18.04 with rdesktop 1.8.3-2build1 and it
> does the
Public bug reported:
noob! no idea... doesn't the auto bug report say?
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubiquity 18.04.14.12
ProcVersionSignature: Ubuntu 5.0.0-23.24~18.04.1-generic 5.0.15
Uname: Linux 5.0.0-23-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.7
Architecture: a
The bug has been marked as expired due to no response from the
maintainer, reopening as new.
** Changed in: scilab (Ubuntu)
Status: Expired => New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/
/etc/fstab
#
LABEL=ubuntu/ btrfs
defaults,compress=zstd,commit=120,ssd,subvol=@ubuntu0 1
LABEL=boot /boot ext4defaults
0 2
tmpfs /tmp
/etc/crypttab
# Example crypttab file. Fields are: name, underlying device, passphrase,
cryptsetup options.
ubuntuDevice UUID=2b44dbfa-f195-4a27-b126-c895c31a1bd5 none
luks,initramfs,discard
swapDevice UUID=676be184-ca1a-464c-82f6-dfea11adb1b9 none
luks,initramfs,discard
--
You received thi
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
#GRUB_CMDLINE_LINUX_DEFAULT="quiet splash ro rootflags=subvol=@ubuntu
mem_sleep_default=deep acpi_backlight=vendor pcie_aspm=force acpi_osi=Linux
dm_mod.use_blk_mq=1 quiet kas
Public bug reported:
Description:
- my system gets stuck at "Booting, Loading initramfs" (the first 2 lines of
booting, after grub)
- does not even show the enter cryptsetup passphrase
- affected kernels:
# apt list --installed |grep linux-signed
WARNING: apt does not have a stable CLI interface.
apport information
** Tags added: apport-collected bionic wayland-session
** Description changed:
Description:
- my system gets stuck at "Booting, Loading initramfs" (the first 2 lines of
booting, after grub)
- does not even show the enter cryptsetup passphrase
- affected kernels:
# a
> apport-collect 1829620
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable to run
this command, please add a comment stating that fact and change the bug status
to 'Confirmed'.
I have ran and uploaded the output from app
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1829620/+attachment/5264700/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1829620
Hi Simon,
> a coworker and myself , both on ubuntu , have been it by the same
problem
thanks for confirming the error! Could you state what HW are you
running? As the bug apparently does not hit everybody.
> if we try with a older kernel in the grub list it works the first time
and then it does
> uninstalling cryptsetup and running upgrade-grub seems to fix the
problem in my case
Awesome, thank you Simon!
For me this fixes the issue with non-ubontu kernel (I don't have the old
versions of official kernels to try on).
So the final workaround is:
- have non-ubuntu (or old?) kernel
- sp
Adding cryptsetup to the list of affected, as even for non-ubuntu
kernels, action is required (reinstall cryptsetup) to fix this.
** Description changed:
Description:
- my system gets stuck at "Booting, Loading initramfs" (the first 2 lines of
booting, after grub)
- does not even show the
10 years old issue, time to close this?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/186835
Title:
When unattendedly started via udev, cryptdisks takes 3 minutes to
start
To manage notifications
> > Hardware
> We use a laptop Asus vivobook S15 (we both have the very same model)
This leads me to hypothesis: The bug affects only(?) ASUS with later
(Kaby lake) Intel CPUs ?
** Summary changed:
- cryptsetup stuck at loading initramfs
+ ASUS microcode/kernel stuck at loading initramfs
** Cha
hi TJ, thank you very much for the helpful debug instructions!
> I just realised your report isn't about cryptsetup being the problem
and you never reach the initialramfs shell.
Yes, this is the case. Still, checked the lsinitramfs and the image
files are OK, with all the cryptsetup binaries.
I
ASUS zenbook ux433fn CPU info on machine hit by this bug.
** Attachment added: "/proc/cpuinfo"
https://bugs.launchpad.net/ubuntu/+source/intel-microcode/+bug/1829620/+attachment/5265096/+files/zenbook14_ux433fn_cpuinfo.txt
--
You received this bug notification because you are a member of Ubu
apport information
** Attachment added: "ProcCpuinfoMinimal.txt"
https://bugs.launchpad.net/bugs/1829620/+attachment/5265098/+files/ProcCpuinfoMinimal.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/
> I'm wondering if the recent Intel microcode updates and related kernel
patches could be responsible? Can you tell us what CPU the system has?
And BINGO!
This was my suspicion too, I found a way to disable microcode updates to verify
this:
WORKAROUND: disable intel microcode updates
>From this
apport information
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/1829620/+attachment/5265097/+files/Dependencies.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1829620
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1829620/+attachment/5265099/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1829620
** Tags removed: cryptsetup plymouth splash wayland-session
** Tags added: microcode
** Description changed:
Description:
- my system gets stuck at "Booting, Loading initramfs" (the first 2 lines of
booting, after grub)
- does not even show the enter cryptsetup passphrase
- affected kern
Confirmed
WORKAROUND 2: downgrade (and hold) intel-microcode to older version from
bionic/main
apt install --reinstall intel-microcode=3.20180312.0~ubuntu18.04.1
Q: How comes liquorix kernel boots with the current micorcode ok?
Problem scoped down to:
intel-microcode from HWE (18.04.2) causes
TJ,
> An additional kernel command-line option that might reveal more would be
> remove "quiet splash" and add "debug early_print=XXX" where XXX is vga for
> BIOS-mode or efi for UEFI mode boots.
You may find "earlycon"
no info provided using these options, still stuck at the initrd line
witho
Hi Steve,
no problem, thank you for digging into this!
> ith the affected processors report the output of:
iucode-tool -S
# iucode-tool -S
iucode-tool: system has processor(s) with signature 0x000806eb
> is it correct that you are *not* seeing this with 5.0 kernel from the
> linux-hwe-edge
> Also, do systems succesfully boot when 'mds=no' is passed on the
kernel command line with the problematic microcode in place?
no, this does not help
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/182
Tyler,
> Can you try to boot with the latest Ubuntu kernel, with the
problematic microcode, using 'mds=off' on the kernel command line? (Note
that it is 'off' instead of 'no')
I tried with mds=off, but no avail.
> If that doesn't work, can you try to boot with 'mitigations=off'
passed on the ker
PS,
#dmesg | grep microcode
#
returns nothing on the ubuntu hwe-edge kernel with mitigations=off
(=problematic ucode otherwise loaded)
Actually, is the microcode loaded at all?
# cat /sys/devices/system/cpu/cpu0/microcode/version
cat: /sys/devices/system/cpu/cpu0/microcode/version: No such fi
601 - 700 of 8548 matches
Mail list logo
