Public bug reported:
Binary package hint: tomcat6
This is on Ubuntu 10.04/amd64.
The folder /etc/tomcat6 must be writable by tomcat, since it (at least
on my setup) wants to create folders there for the configured services
and engines, e.g. in my case /etc/tomcat6/opencms/localhost.
The
Hi,
thanks for your explanation.
I have the same problem actually on other hosts not running OpenCms.
I suspect there must be something fishy in my service/engine/host
configuration (It should be changed to write to /etc/tomcat/Catalina/ as
you suggested for auto-deployment)
Best regards!
--
After trying to migrate my dapper from ext3 to xfs I was confronted with this
bug... it is still reproducible in a fully updated dapper.
--
grub-install hangs with xfs root/boot
https://launchpad.net/bugs/8058
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Yes, still no sound... but it seems to be fixed with the latest rc from
alsa
http://www.alsa-project.org/changes/v1-0-12rc1--v1-0-12rc2.txt :
- Fix/add support of Realtek ALC883 / ALC888 and ALC861 codecs
Someone reported that this fixed the problem for him... unfortunately I
don't remember
After upgrading my Acer Wtmi3012 to Edgy, sound is working now. Thanks!
--
integrated sound card does'n work
https://launchpad.net/bugs/39770
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: kdm
Hi,
I upgraded my laptop from kubuntu dapper to edgy, and now
it takes about 30 seconds from the moment X starts until I see the kdm login
screen.
Note that in dapper with kde 3.5.4 this took only a few seconds.
Tell me which additionnal
Public bug reported:
Binary package hint: eclipse
I upgraded from dapper to edgy early this week.
Wanted to try out eclipse, and apt-get install eclipse downloaded
some 100MB, but eventually failed to run:
[EMAIL PROTECTED]:~$ eclipse
searching for compatible vm...
testing
Public bug reported:
Binary package hint: kde
Hello folks,
since I upgraded from dapper to edgy, from the moment
X starts until kdm is ready, almost 25 seconds pass.
Then, logging into KDE, takes another whoppy 15 seconds.
Note that on previously, on dapper, kdm launched almost
instantly (2-3
recording using internal mic. works here. Using an external however I
could not get a signal, probably misuse of mine...
--
integrated sound card does'n work
https://launchpad.net/bugs/39770
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I can reprocuce this bug with todays intrepid (just dist-upgraded). Will
something be done before release? This is really ugly
--
[intrepid] KNetworkManager causes ~20 wakeups/second
https://bugs.launchpad.net/bugs/276138
You received this bug notification because you are a member of Kubuntu
How about getting the version 2.5 of the driver into intrepid?
It will be released tomorrow, and yesterday the final rc was released:
http://lists.freedesktop.org/archives/xorg/2008-October/039496.html
--
Flickering with version 2.4.0
https://bugs.launchpad.net/bugs/256142
You received this bug
Confirming the bug and the workaround on i686
--
KDE4 is somehow slow after upgrade to hardy
https://bugs.launchpad.net/bugs/203334
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I have a problem which is maybe related to this.
Since I upgraded to KDE4 on Gutsy, I can e.g. not find konqueror from
KDE4 in kickoff.
By typing konqueror in the search box, it finds Konqueror Webbrowser
(KDE3) and Konqueror Webbrowser (KDE4), but nothing happens when I
click on the Konqueror
Hello,
I use 2.6.24 on my T2300 dualcore laptop, with kubuntu hardy (without
opera), and also 2.6.24 on a PIII-3GHz with debian unstable. Note that I
do see Rescheduling Interrupts as well on my debian, but less often
and less intensive. Isn't this a pointer to that it's however a kernel
issue?
Hi Colin, I did not know this, thanks for the information. I will try to
track down which program causes the wakeups
--
Kernel 2.6.24-2 causing ~1000 wakeups by Rescheduling Interrupts
https://bugs.launchpad.net/bugs/177895
You received this bug notification because you are a member of Ubuntu
Is there no possibility to put global, system-wide settings into
/etc/firefox/pref/firefox.js ?
I tried so but had no success. If this worked we would not need to edit
firefox.cfg at all.
--
firefox .deb overwrites firefox.cfg which stores systemwide settings such as
startpage, proxy
I can confirm that the taskbar problems disappear after upgrading wine
to 1.0 from your ppa
--
Taskbar buttons missing in Wine 0.9.59
https://bugs.launchpad.net/bugs/216235
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Any news about this? Will it be available as an update in Hardy?
--
Virtio devices from libvirt
https://bugs.launchpad.net/bugs/218574
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: libapache2-mod-php5
I need php5-interbase for development in my job, please provide it again
:-)
** Affects: php5 (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
php5-interbase missing in feisty
I have just tried the package and it works fine for me.
--
php5-interbase missing in feisty
https://bugs.launchpad.net/bugs/110637
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
In dapper, as of today, the install (still) fails with md5 checksum
error:
0:18:59 (84.37 KB/s) - `./install_flash_player_9_linux.tar.gz' saved
[3044538/3044538]
Download done.
md5sum mismatch install_flash_player_9_linux.tar.gz
The Flash plugin is NOT installed.
This is my sources.list:
deb
There are news: http://browser.garage.maemo.org/news/10/
--
[wish] provide a qt backend for firefox in kubuntu
https://bugs.launchpad.net/bugs/193538
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
You have solved it, until your next reboot... /var/tmp is tmpfs in
Ubuntu :-)
You can permanently fix it by adding the following lines on top of the
/etc/init.d/firebird1.5-super script:
mkdir -p /var/run/firebird/1.5
chown firebird.firebird /var/run/firebird/1.5 -R
--
[gutsy] firdbird 2.0
I have the same problem with the volume keys on gutsy, it just goes from
0 to 11%.
I tried also with newly created user, and it did not change anything.
Hardware is acer travelmate 3012wtmi
Also, closing the lid does not lock the screen, even it's set up to do
so.
--
[kubuntu gutsy] keyboard
The same is true for the firebird1.5-super-package.
As the reporter states I have to create the directory manually for getting
firebird to start, like this e.g.:
sudo mkdir -p /var/run/firebird/1.5
sudo chown firebird.firebird /var/run/firebird/1.5 -R
IIRC already dapper suffered of this bug.
php5-interbase is also not available in gutsy:
[EMAIL PROTECTED]:~$ sudo apt-get install php5-interbase
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or
Upgrading to upstream-version 2.7.6 will fix this. Quote from the hplip
release-notes:
- No more Start-up daemons
- Replaced hpiod with the new HP Multi-Point Transport Driver (hpmud). Hpmud is
a shared library instead of a daemon.
This is even better, as even for HP users, there is no more
and btw, also cups should run only when a printer is detected, or
installed :-)
--
Shouldn't run daemons when the relevant hardware is not present
https://bugs.launchpad.net/bugs/20309
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
In feisty the speed is ok. This bug can be closed.
--
Slow startup
https://bugs.launchpad.net/bugs/67219
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
regarding my Acer TravelMate 3012WTMi. I run feisty now, and everything works,
except the mic-input on the front
of the laptop. It works, but the signal is not boosted. I tried plugging my
portable mediaplayer, and as its signal
is higher than a bare microphone, it works.
In windows, the sound
Public bug reported:
I have, in Feisty, installed sun-java6, eclipse, and tomcat 5.5, all
from the official Ubuntu repository.
The problem comes when I want to create a new Dynamic Web Project.
First you have to set up a target runtime. I want to choose tomcat 5.5
of course.
If I try to add a
** Attachment added: Screenshot of window showing the error
http://launchpadlibrarian.net/8296774/eclipse_tomcat_problem.png
--
Eclipse can not see tomcat installation
https://bugs.launchpad.net/bugs/123865
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Can someone briefly explain why in intrepid the driver worked well, and
accelerated?
--
FFe: Xv and EXA not supported on R6xx/R7xx chipsets
https://bugs.launchpad.net/bugs/334101
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Hmm :-) Until 3 days ago I used intrepid on my Vaio FW21E, with the
radeon driver, and it did not feel sluggish at all.
Although I could not enable KDE's desktop effects, overall drawing
performance seemed very good.
In jaunty, X uses more CPU and painting is much slower, in comparison. I
OK tried XAA and it feels better.
But now I got the shiny 6.12 driver and expected EXA to work, but it
does not look like it works... Some data:
uname -a
Linux viking 2.6.28-10-generic #32-Ubuntu SMP Mon Mar 16 02:48:55 UTC 2009
x86_64 GNU/Linux
Excerpts from Xorg.0.log:
[0.514602]
...since the kernel from jaunty seems to be not new enough regarding drm
and radeon, and as my pre-poster already wrote, I built drm.ko and
radeon.ko modules using instructions
http://wiki.x.org/wiki/radeonhd%3Ar6xx_r7xx_branch, and now it works.
[1.425733] (II) RADEON(0): [dri] Found DRI
Bryce, thanks for the info and the pointers.
Don't know whether it's in the scope of this report, but I noticed this
today (check the first and the last line of this excerpt):
[0.331623] (II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open
Public bug reported:
Binary package hint: webkitkde
webkitkde got quite some commits recently, pls update the package in
jaunty to a recent svn :-)
** Affects: webkitkde (Ubuntu)
Importance: Undecided
Status: New
--
update webkitkde
https://bugs.launchpad.net/bugs/345420
You
I wonder if KDE really rewrites it's configfiles on startup? Why write
something at all on startup? Maybe a KDE dev can comment on this...
--
Ext4 data loss
https://bugs.launchpad.net/bugs/317781
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
kicking this into gear would indeed be nice...
Maybe I misunderstand the principles of ubuntus QA, and what upgrades of
a stable release distro mean, but imho it's at best not very
userfriendly if such a bug is not dealt with at all. At least it's just
a poor QA. What's the point of reporting the
I use the radeon driver version 6.10.99.0-1ubuntu1 and my graphics card
is:
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10]
I removed agpmode 1 from xorg.conf and it still freezes on X startup,
some seconds after kdm startup in fact.
--
x-server freezes
webkitkde got quite some fixes in svn, the ubuntu package is not really
up2date anymore. Syncing to current svn fixes this reloading issue as
well as far as as can tell from this commit
http://websvn.kde.org/?view=revrevision=937125
pls upgrade webkitkde to current svn :-) you can the as well
Linus made some comments about the filesystem's behaviour:
http://lkml.org/lkml/2009/3/24/415
http://lkml.org/lkml/2009/3/24/460
--
Ext4 data loss
https://bugs.launchpad.net/bugs/317781
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I experience freezes quite often as well over the last 2 weeks +/-, probably
since the moment the radeon driver supports
acceleration.
I use jaunty/amd64, and my hardware is
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon
HD 3400 Series
Today I turned off acceleration
Has this bug been reported upstream already? if not, Kubuntu-
maintainers, should we do it?
--
Can't connect to a hidden network
https://bugs.launchpad.net/bugs/330811
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Changelog here:
http://websvn.kde.org/trunk/playground/libs/webkitkde/?view=log
--
update webkitkde
https://bugs.launchpad.net/bugs/345420
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I need to use Hardy for at least 2 more years.
Just want to say that I am still unable to lock down certain
preferences in Ubuntu hardy in an way that will not be overwritten by a
package upgrade.
I added the following line to /etc/firefox-3.0/pref/firefox.js
pref(general.config.filename,
Should we report this upstream? Or will the Kubuntu developers take care
of that?
--
[intrepid] KNetworkManager causes ~20 wakeups/second
https://bugs.launchpad.net/bugs/276138
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to knetworkmanager in
More info:
I tried with the 2.6.28-10 kernel, and the situation was the same,
instability-wise.
Can anyone point me to the upstream bugreport of this issue?
It really makes ,y system unusable as soon as I turn on DRI, I had 3 freezes in
20 minutes of time
Correction to my post #5:
I only put
False alarm... Now even with dri off I had another freeze, and I suspect the
iwlagn driver on my system, as seen here:
https://bugs.launchpad.net/ubuntu/jaunty/+source/linux/+bug/276990
Sorry for the noise
--
[RV250][JAUNTY] X Freezes with Radeon driver EXA/XAA Composite
Looks like the problem with the external input not working
is/will be fixed upstream:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2668
Especially comment and patch added on: 01-25-07 14:29
So I guess alsa 1.0.14 will resolve this issue.
--
integrated sound card does'n work
I built the complete alsa 1.0.14-rc2 (driver, lib, plugins, tools,
utils) but unfortunately the external mic-in does still not work...
--
integrated sound card does'n work
https://launchpad.net/bugs/39770
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Apart of fixing https://launchpad.net/ubuntu/+source/gspca/+bug/76768 ,
inclusion of the gspca driver would also make the webcam work on an Acer
Wtmi 3012.
--
Mercury Cyberpix S-550V does not work with included spca5xx, works with latest
release
https://launchpad.net/bugs/71986
--
ubuntu-bugs
Public bug reported:
Binary package hint: kde
Some month ago I went from debian sid to dapper, and I conserved my home
partition, thus dapper used my .kde etc, and all this went well, none of
my settings were lost and I had no problems at all with dapper.
Then when edgy came, I of course
I have to add that even after many tries I, and someone else
I know who has the same laptop (using fedora however), am not able to use the
microphone input.
Don't know whether it actually does not work, or just switching to the
input is broken...
--
integrated sound card does'n work
On my fully updated Karmic I still see the bug on amd64
--
software-properties-kde does not start, (QtCore Error)
https://bugs.launchpad.net/bugs/407418
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
How is the situation for Karmic? I got an Android phone and would like
to encode some of my videos to h264 to be able to play them back on it.
Here is the commandline with the error about the missing codec:
y...@viking:~/Videos$ ffmpeg -i movie.avi -aspect 3:2 -s 480x320 -vcodec h264
-b 480k -r
Hi Paul, I just installed it right now after reading your post.
Unfortunately it does not change anything for ffmpeg. Or is it another
executable which I am supposed to launch?
--
please enable x264 support
https://bugs.launchpad.net/bugs/276697
You received this bug notification because you are
Thanks Paul, this got me one step further.
I did however not manager what to specify to get aac encoding work, even
I installed libfaad/libfaac, but this is not the scope of this BR.
here my commandline for the archives:
y...@viking:~/Videos$ ffmpeg -i Le\ Diner\ de\ Cons.avi -aspect 3:2 -s
What would be the correct -acodec parameter to encode with aac support
using the libfaad package?
I tried -acodec aac|libfaad|libfaad0 without success.
--
Please enable AAC Support in ffmpeg
https://bugs.launchpad.net/bugs/6366
You received this bug notification because you are a member of
The same here on kubuntu intrepid:
Dec 18 10:03:26 yves-laptop NetworkManager: WARN
connection_state_changed(): Message did not receive a reply (timeout by
message bus)
Any chance to get this fixed? I need openvpn for doing my job and I would
prefer to have knetworkmanager take care of it.
--
I can reproduce this in edgy, with the KDE 3.5.6 packages from jriddell.
It seems not to happen when closing the tab with the close-tab-button.
--
[feisty] konqueror freezes when closing a tab with a flash animation
https://launchpad.net/bugs/92207
--
ubuntu-bugs mailing list
My install of jaunty suffers as well of this bug.
What I do not really get is why canonical, who actually pay people to do make a
decent distro, do not simply acknowledge the bug, check with upstream, fix it
in svn, and ship the updated package?
Or is it because in this particular case the
Public bug reported:
Binary package hint: xserver-xorg-core
When maximizing a konsole window, x freezes. It does no matter if the
meximize happens by pressing the maximize button, or double-clicking the
titlebar.
Happens since I upgraded to Natty today. Maverick did not have it.
ProblemType:
Here some people report the same:
http://www.nvnews.net/vbulletin/showthread.php?t=161308
Looks like downgrading xorg-server from 1.10 to 1.9 solves the problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/772311
Title:
X freezes when maximizing konsole window
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Maybe we could have a statement from Ubuntu about this rather serious
issue. xterm is not so funny to use if you are used to konsole.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/772311
Title:
X
Public bug reported:
Using maverick on amd64, fully upgraded, KDE desktop-effects do not work
since some time.
When trying to enable them via kwin config I get this information:
Desktop effects are not available on this system due to the following
technical issues:
But no issue is listed.
Log
apport information
** Tags added: apport-collected
** Description changed:
Using maverick on amd64, fully upgraded, KDE desktop-effects do not work
since some time.
When trying to enable them via kwin config I get this information:
Desktop effects are not available on this system
In case it could be useful, here Xorg.log.
** Attachment added: Xorg.0.log
https://bugs.launchpad.net/ubuntu/+bug/647467/+attachment/1641911/+files/Xorg.0.log
--
KDE desktop-effects not working
https://bugs.launchpad.net/bugs/647467
You received this bug notification because you are a
Maybe the latest release of xf86-video-ati (6.13.2 from yesterday) would
help:
http://lists.x.org/archives/xorg-driver-ati/2010-September/017206.html
--
KDE desktop-effects not working
https://bugs.launchpad.net/bugs/647467
You received this bug notification because you are a member of Kubuntu
Hi Jeremy,
I still have this issue, with the -21 and also the -22 kernel.
I executed apport-collect, but fail to see whether it posted the
information correctly.
--
Freeze with KMS enabled on Radeon RV350
https://bugs.launchpad.net/bugs/561789
You received this bug notification because you are
AFAICS it also affects plasmoids written in Python.
I have 2 installations of Karmic, on 2 different laptops. One 32bit
(does not see this bug), and one amd64 (sees this bug)
--
software-propeties-kde does not start, (QtCore Error)
https://bugs.launchpad.net/bugs/407418
You received this bug
I can confirm that what Andreas says works for me as well, on amd64.
--
software-properties-kde does not start, (QtCore Error)
https://bugs.launchpad.net/bugs/407418
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
My case, with my fully updated Karmic amd64:
a) yes
b) no
c) y...@viking:~$ ls -la /usr/lib/pyshared/python2.5/PyQt4/QtCore.so
-rw-r--r-- 1 root root 1770368 2009-07-16 02:04
/usr/lib/pyshared/python2.5/PyQt4/QtCore.so
--
software-properties-kde does not start, (QtCore Error)
btw I seem to use python2.6, and the file exists for that version of python as
well:
-rw-r--r-- 1 root root 1.7M 2009-07-16 02:04
/usr/lib/pyshared/python2.6/PyQt4/QtCore.so
--
software-properties-kde does not start, (QtCore Error)
https://bugs.launchpad.net/bugs/407418
You received this bug
Jeremy, I am sorry but apport-collect does not want to post, it gives an
401 Unauthorized. How can I reset or re-specify my login data?
y...@yves-laptop:~$ apport-collect -p linux 561789
Traceback (most recent call last):
File /usr/share/apport/apport-kde, line 461, in module
I still see this issue on my acer travelmate 8000 with it's ati radeon
mobility 9700 (rv350) using the -20 kernel.
When I boot with kms enabled, I get to see plymouth nicely, but as soon
as kdm starts, the screen is corrupted. swicthing back to the console
shows the same errors printed out
I still see this issue on my acer travelmate 8000 with it's ati radeon
mobility 9700 (rv350) using the -20 kernel.
when I boot with kms enabled, I get to see plymouth nicely, but as soon
as kdm starts, the screen is corrupted. swicthing back to the console
shows the same errors printed out
Probably my last comment belongs to issue 509273
--
[lucid] desktop runs out of video memory on ATI Radeon Mobility 7500
https://bugs.launchpad.net/bugs/507148
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
When I boot lucid with KMS enabled on my Acer Travelmate 8000 (which has
an Ati Mobility 9700 (RV350)), X get's corrupted and does not respond to
input anymore on KDM launch.
When I switch to a VT I see the following messages:
Mar 12 21:06:13 sparrow kernel: [ 120.041087]
I did so:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789
Maybe someone with the right karma can make sure the bug get's tagged to
be part of lucid.
--
[Lucid] Radeon Xpress 200M needs PCI quirk to fix or disable MSI
https://bugs.launchpad.net/bugs/509273
You received this bug
Public bug reported:
Binary package hint: plymouth
I observe plymouthd causing 25 wakeups/second on my up2date Maverick
install. This is Kubuntu in case it matters.
Look at the screenshot to see it. And look at the general number of
wakeups which is ridiculous.
p.s.
I remember times having 50
** Attachment added: plymouth.png
http://launchpadlibrarian.net/52390205/plymouth.png
--
plymouthd causes 25 wakeups
https://bugs.launchpad.net/bugs/609285
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
libjpeg-turbo seems to greatly improve speed compared to libjpeg.
Read more here:
http://libjpeg-turbo.virtualgl.org/About/Performance
http://fedoraproject.org/wiki/Features/libjpeg-turbo
Maybe it would be good to package it, or at least offer it in a ppa.
** Affects:
Looks like the new -21 kernel solved the problem for me!
I could boot with KMS and it runs stable for ~ 1.5 hours. Will see if it
remains stable throughout the day
--
Freeze with KMS enabled on Radeon RV350
https://bugs.launchpad.net/bugs/561789
You received this bug notification because you
Sorry, today I had freezes again, immediately at kdm, or shortly after
white KDE started up. Back to radeon.modeset=0 for now.
This is with all packages updated today.
--
Freeze with KMS enabled on Radeon RV350
https://bugs.launchpad.net/bugs/561789
You received this bug notification because
My hardware is:
ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
--
Freeze with KMS enabled on Radeon RV350
https://bugs.launchpad.net/bugs/561789
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
To Ubuntu: please see this also in the perspective of people like me who
use tomcat with sun-java6. I do not really care about the browser
plugin, but for java app-hosting in tomcat it is important to have a
*sun* jvm, since openjdk is not on par yet.
--
Security update for Sun Java JRE 6:
Can kubuntu also be run without hal now (as ubuntu)?
Removing hal still wants to remove kubuntu-desktop (as of today)
--
Latest HAL update in Lucid causes many problems with KDE.
https://bugs.launchpad.net/bugs/491834
You received this bug notification because you are a member of Ubuntu
Bugs,
Should I file a separate issue for that (hal removal removes kubuntu
desktop) ?
--
Latest HAL update in Lucid causes many problems with KDE.
https://bugs.launchpad.net/bugs/491834
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to
Hi,
thanks for your explanation.
I have the same problem actually on other hosts not running OpenCms.
I suspect there must be something fishy in my service/engine/host
configuration (It should be changed to write to /etc/tomcat/Catalina/ as
you suggested for auto-deployment)
Best regards!
--
Public bug reported:
Binary package hint: tomcat6
This is on Ubuntu 10.04/amd64.
The folder /etc/tomcat6 must be writable by tomcat, since it (at least
on my setup) wants to create folders there for the configured services
and engines, e.g. in my case /etc/tomcat6/opencms/localhost.
The
As this looks like a missing feature, has it been reported upstream?
** Bug watch added: KDE Bug Tracking System #150680
http://bugs.kde.org/show_bug.cgi?id=150680
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Well, looks like:
https://bugs.kde.org/show_bug.cgi?id=150680
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/132060
Title:
[feisty] network-manager-openvpn doesn't work when using x509 and private
Cool, Andy!
Does it also support authentication which asks for a user *and* password upon
connecting?
A customer of mine runs an OpenVpn which behaves like that.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Same on natty. Any more information you need from my system?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/647467
Title:
KDE desktop-effects not working
--
ubuntu-bugs mailing list
If you want to use a Linux distro, and need Java 8, be aware that Fedora
20 has Java 1.8.0_25.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1341628
Title:
[needs-packaging]openjdk-8 in 14.04
To
98 matches
Mail list logo
