I can reproduce this on Wily with
# apt-cache policy ceph
ceph:
Installed: 0.94.5-0ubuntu0.15.10.1
Candidate: 0.94.5-0ubuntu0.15.10.1
Version table:
*** 0.94.5-0ubuntu0.15.10.1 0
500 http://eu.archive.ubuntu.com/ubuntu/ wily-updates/main amd64
Packages
100
You can set "osd pool default pg num" and "osd pool default pgp num" to
some higher value in your ceph.conf before creating pools if you want
some higher values than the default and do not want to specify it on the
command line every time.
For more complex setups however, you want to match the pg
You can set "osd pool default pg num" and "osd pool default pgp num" to
some higher value in your ceph.conf before creating pools if you want
some higher values than the default and do not want to specify it on the
command line every time.
For more complex setups however, you want to match the pg
Sorry for the delay, I must admin that I'm not sure about that anymore.
I tried reproducing this issue with a current installation of Wily, but
failed. So I guess we can assume this to be invalid now.
** Changed in: ceph (Ubuntu)
Status: Incomplete => Invalid
--
You received this bug
Sorry for the delay, I must admin that I'm not sure about that anymore.
I tried reproducing this issue with a current installation of Wily, but
failed. So I guess we can assume this to be invalid now.
** Changed in: ceph (Ubuntu)
Status: Incomplete => Invalid
--
You received this bug
* Correctly remove obsolete conffile
* Update d/watch
* Install examples in the expected location
-- Dr. Tobias Quathamer <to...@debian.org> Fri, 12 Feb 2016 22:54:02
+0100
** Affects: denemo (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification b
ton <m...@pietrobattiston.it> (Closes: #773264)
-- Dr. Tobias Quathamer <to...@debian.org> Sun, 17 Jan 2016 14:02:26
+0100
** Affects: denemo (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, w
Since this bug is obviously not going to be fixed any time soon, there
is an alternative for Cinnamon users:
Multi-Core System Monitor 1.5
http://cinnamon-spices.linuxmint.com/applets/view/79
You can install it from Linux Mint's Panel Applets list
--
You received this bug notification because
Public bug reported:
A system error message is displayed upon boot.
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: xorg 1:7.7+1ubuntu8.1
ProcVersionSignature: Ubuntu 3.19.0-43.49~14.04.1-generic 3.19.8-ckt10
Uname: Linux 3.19.0-43-generic i686
.tmp.unity.support.test.0:
ApportVersion:
Public bug reported:
When I installed MySQL I use ')' in the password. The symbol does on work when
the password is on the command line to start MySQL(I do this since I am the
only one who uses this computer).
I forgot that I did not need to put the password on a command line ans started
to
This is the expected behaviour if your DHCP server also specifies a
classless static route, see RFC 3442:
If the DHCP server returns both a Classless Static Routes option and a
Router option, the DHCP client MUST ignore the Router option.
** Changed in: isc-dhcp (Ubuntu)
Status: Confirmed
Public bug reported:
There seems to be some issue with the udev triggers, either they do not
happen properly for partitions or they happen too early in the boot
process.
If I do a "ceph-disk activate /dev/sdXX" after the system has booted,
the OSD is starting just fine.
If I do a "udevadm
Public bug reported:
There seems to be some issue with the udev triggers, either they do not
happen properly for partitions or they happen too early in the boot
process.
If I do a "ceph-disk activate /dev/sdXX" after the system has booted,
the OSD is starting just fine.
If I do a "udevadm
Public bug reported:
When upgrading libvirt-bin after adding the stable/liberty cloud-ppa,
I'm getting this error:
ubuntu@jr2:~$ sudo apt-get install libvirt-bin
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were
Public bug reported:
When upgrading libvirt-bin after adding the stable/liberty cloud-ppa,
I'm getting this error:
ubuntu@jr2:~$ sudo apt-get install libvirt-bin
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were
I think there is some confusion here. As I understand it, the part that
was fixed in libvirt was changing the API so that now it is possible to
define a subset of block devices to be copied during migration. Now to
fix the original issue, another patch in nova will be needed, that uses
this
I think there is some confusion here. As I understand it, the part that
was fixed in libvirt was changing the API so that now it is possible to
define a subset of block devices to be copied during migration. Now to
fix the original issue, another patch in nova will be needed, that uses
this
Public bug reported:
The systemd service generated from /etc/init.d/apache2 via systemd-sysv-
generator contains the line
RemainAfterExit=yes
causing systemd to ignore crashes of the service. In order to reproduce
this, add a non-existing address to /etc/apache2/ports.conf, which will
cause the
Public bug reported:
The systemd service generated from /etc/init.d/apache2 via systemd-sysv-
generator contains the line
RemainAfterExit=yes
causing systemd to ignore crashes of the service. In order to reproduce
this, add a non-existing address to /etc/apache2/ports.conf, which will
cause the
Public bug reported:
There is a symlink in /lib/systemd/system from udev.service to systemd-
udevd.service, however, running systemctl is-active udev returns
unknown instead of active initially. This can be solved by running
systemctl status udev once, but for monitoring the service it would be
This may in fact be a bug of systemd in general, as is seems to affect
all service aliases created via symlinks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1488954
Title:
systemctl is-active
** Also affects: systemd
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1488954
Title:
systemctl is-active udev returns unknown
To manage notifications
@Dariusz: The package for Vivid works fine for me, thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1374109
Title:
epmd does not support binding to an IPv4 address anymore
To manage
Tested
https://launchpad.net/ubuntu/+source/neutron/1:2015.1.1-0ubuntu2/+build/7782259/+files
/neutron-plugin-neutron-agent_2015.1.1-0ubuntu2_all.deb and it solves
the issue for me.
** Tags removed: verification-needed
** Tags added: verification-done
--
You received this bug notification
Tested
https://launchpad.net/ubuntu/+source/neutron/1:2015.1.1-0ubuntu2/+build/7782259/+files
/neutron-plugin-neutron-agent_2015.1.1-0ubuntu2_all.deb and it solves
the issue for me.
** Tags removed: verification-needed
** Tags added: verification-done
--
You received this bug notification
Dariusz: I'm seeing the same issue, but running on Vivid, could you add
packages for that to your repo so I could test your solution?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1374109
Title:
** Attachment added: lsb_release, dmesg, Xorg.0.log, /proc/bus/input/devices
and lspci -vnvn output, both when touchpad is not detected and when detected
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1473602/+attachment/4427660/+files/problem-logs
--
You received this bug
I have filed bug #1473602 with bug description
Date: Wed, 8 Jul 2015 11:08:45 +
From: christopher.m.penal...@gmail.com
To: mitradranir...@outlook.com
Subject: [Bug 1335463] Re: [Toshiba Satellite E55-A5114] ETPS/2 Elantech
Touchpad not working on 14.04
Dr Anirban Mitra, it will help
bug-exists-upstream-4.1.1
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1473602
Title:
Elantech touchpad not detected after few days in ubuntu 14.04.2 in
acer aspire one d255e
To manage
Public bug reported:
I am reporting this manually as ubuntu-bug reports all packages as Not an
ubuntu package . Moreover I have very poor connectivity at home where I use
the ubuntu laptop so that i can not even use apt-get to install packages.
This problem started with 13.10 then with
Sorry for the typo. I meant the new mainline kernel is successfull in
detecting the touchpad only if Single is given as a boot time parameter.
Once detected, it remains detectable even by the 3.16 ubuntu kernel on
reboot. But if I power off, it becomes not detectable again. I know I
should file a
I had a similar problem with my acer aspire one. Downloading and
installing the latest manline kernel 4.1.1 did not help in detection.
Then I found that newer kernel if Single is added as a boot parameter.
Once it is detected the stock ubuntu kernel 3.16 also detected the
touchpad on direct
Hi,
This bug does not seem to affect Ubuntu 15.04 Vivid kernel 3.19.0-21
either. So, you may go ahead and close this bug as it seems to have been
corrected in later realseses of Ubuntu.
Thank you all for all the help.
--
Dr Joseph D. Wallach
walla...@operamail.com
On Fri, Jun 26, 2015
In further testing this problem it seems that it does not occur in Ubuntu 14.10
running with kernel 3.16.0-38
Hope this helps
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1450989
Title:
USB
Affects me when simply writing text in gedit!
Killing ibus-daemon in the terminal cuts the CPU usage and restores
responsiveness.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1276186
Title:
Hi,
A workaround for this bug is:
Start the machine from scratch with all the USB devices plugged in.
Wait for the Grub menu to show on the screen.
Using the keyboard select Ubuntu as the operating system to load.
Right after selecting the Ubuntu OS, disconnect the USB mouse (be it direct USB
Hi,
Yes, WiFi was also failing for me. The workaround solves the WiFi
problem also.
Good luck.
--
Dr Joseph D. Wallach
walla...@operamail.com
On Wed, Jun 3, 2015, at 09:56 PM, sTiVo wrote:
You don't mention if WiFi was also failing for you. It is for me. Does
your workaround solve
** Also affects: python-glanceclient (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1342080
Title:
glance api is tracebacking with error: [Errno
Still seeing this in Ubuntu Vivid with python-
glanceclient=1:0.15.0-0ubuntu1, any chance to get this backported?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1342080
Title:
glance api is
** Also affects: python-glanceclient (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to python-glanceclient in Ubuntu.
https://bugs.launchpad.net/bugs/1342080
Title:
glance api is
.
--
Dr Joseph D. Wallach
walla...@operamail.com
On Fri, May 29, 2015, at 12:44 PM, Steve Cohen wrote:
What, please, is the status of this bug? Is there a fix or candidate
fix in any newer version of the kernel?
Since I signed on to this bug in early April, I have been looking for
some
I tested http://launchpadlibrarian.net/208123057/rabbitmq-
server_3.5.1-2_all.deb and it works fine for me.
It would be great to see this backported to vivid.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to rabbitmq-server in Ubuntu.
I tested http://launchpadlibrarian.net/208123057/rabbitmq-
server_3.5.1-2_all.deb and it works fine for me.
It would be great to see this backported to vivid.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
May 26,2015
Sorry for the delay.
As requested “the reverse commit bisect from kernel 3.13 to 4.1-rc2“ was done.
The results are as folows:
Last bad was:
3.13.11.2-trusty aka
3.13.11-03131102-generic_3.13.11-03131102.201405081435_amd64.deb
Last good was:
3.13.11.3-trusty aka
wont-fixing the nova side will leave it broken for quite some time
until the backport has made its way into all relevant distro images. I'd
prefer to add your patch into nova code as workaround for older libvirt
versions.
--
You received this bug notification because you are a member of Ubuntu
wont-fixing the nova side will leave it broken for quite some time
until the backport has made its way into all relevant distro images. I'd
prefer to add your patch into nova code as workaround for older libvirt
versions.
--
You received this bug notification because you are a member of Ubuntu
I think there is still something wrong with the packaging here, I get:
~# apt-get install percona-xtradb-cluster-5.6/proposed-updates
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'percona-xtradb-cluster-5.6-dbg' for regex
Ah, right, that works better now, thanks and sorry for disturbing. ;)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1448533
Title:
Packaging bug prevents install of PXC 5.6
To manage notifications
As per your instructions the
linux-headers-4.1.0-040100rc2-generic_4.1.0-040100rc2.201505032335_amd64.deb
linux-image-4.1.0-040100rc2-generic_4.1.0-040100rc2.201505032335_amd64.deb
linux-headers-4.1.0-040100rc2_4.1.0-040100rc2.201505032335_all.deb
were downloaded and installed in the Ubuntu 14.04
and the keyboard were now operable.
It should be said, however, that the resulting Ubuntu operating system
environment was very unstable, but that was not the point of the test.
So now what is next?
--
Dr Joseph D. Wallach
walla...@operamail.com
On Mon, May 4, 2015, at 10:19 PM, Christopher
Did you define ERL_EPMD_ADDRESS in your rabbitmq-env.conf?
Then you would be hitting
https://bugs.launchpad.net/ubuntu/+source/erlang/+bug/1374109 and you
can find a possible workaround there.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is
Did you define ERL_EPMD_ADDRESS in your rabbitmq-env.conf?
Then you would be hitting
https://bugs.launchpad.net/ubuntu/+source/erlang/+bug/1374109 and you
can find a possible workaround there.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Thanks for the fast fix, is there already a package built from the patch
somewhere that I could test?
Also you might want to amend the title of the bug, as enabling the
service is in fact performed properly, systemctl just throws an error in
the end when it should simply terminate successfully
Tested and confirmed working, thanks again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1447807
Title:
systemctl enable shows error on enabling a SysV service
To manage notifications about this
While I agree that this may never have been guaranteed, it has been
working with all previous init systems. For me, the implied policy of
using rc.local is: Run after all other init stuff has finished.
For example, https://github.com/puppetlabs/razor-server uses modifying
rc.local in order to
Public bug reported:
The current definition in `/lib/systemd/system/rc-local.service` uses
`After=network.target`, which is pretty useless, as `network.target`
according to
http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/ only has
relevance during shutdown, which never happens for
*** This bug is a duplicate of bug 1447807 ***
https://bugs.launchpad.net/bugs/1447807
** This bug has been marked a duplicate of bug 1447807
systemctl enable fails to enable a SysV service
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is
I wouldn't agree that this is purely cosmetical, as it breaks things
like Chef automation: https://github.com/gmiranda23/ntp/issues/105
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1447807
Title:
*** This bug is a duplicate of bug 1447807 ***
https://bugs.launchpad.net/bugs/1447807
** This bug has been marked a duplicate of bug 1447807
systemctl enable fails to enable a SysV service
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Looking at the source code a bit, I see that in
systemctl.c:enable_sysv_units there is a comment that it should
reshuffle the args array, but it seems it never does that? So
strv_isempty(names) in enable_unit never matches, causing the call to
systemd which is failing, because there is no unit
Public bug reported:
root@node10:~# systemctl enable ntp
Public bug reported:
root@node10:~# systemctl enable ntp
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1450989
Title:
USB attached keyboard and mouse don't work at the login time to
operable and login was possible.
Hope this helps somewhat.
--
Dr Joseph D. Wallach
walla...@operamail.com
On Sat, May 2, 2015, at 11:43 AM, Christopher M. Penalver wrote:
Dr JD Wallach, thank you for reporting this and helping make Ubuntu
better. As per http://www.dell.com/support/home/us/en/04
Public bug reported:
After the update to kernel 3.13.0-51-generic from kernel 3.13.0-45
generic, in Trusty Tahr 64 bit, USB devices don't work at login time.
The login screen comes up but one cannot login because both the keyboard
and the mouse are USB attached devices, and are not working.
I
@Andy: So 3.16.0-34 is the kernel with the fix? Any chance that it will
also be backported to the 3.13 series?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1413540
Title:
Trusty soft lockup issues
Workaround from upstream:
clear the recent documents list (File-Recent Documents-Clear List)
This doesn't work for me. Why? Because clicking on any item in the
Recent Documents List, including Clear List actually just opens up the
first Recent Document!!
Most enterprise users will load and work
Bug Confirmed! to persist through several updates.
I learned programing on an Altair, used DEC computers and decided recently not
to use Windows any more on my personal computers due to the mess the constant
updating of MS Windows 8.1 created for the use of an HP printer. I unpluged an
Ethernet
Public bug reported:
Salam
In libitl-0.7.0/prayertime/src/astro.c +812
http://bazaar.launchpad.net/~ubuntu-branches/ubuntu/utopic/libitl/utopic/view/head:/prayertime/src/astro.c#L812
R4sum = R4[i][0] * cos(R4[i][1] + R4[i][2] * JM);
The R4[] array (declared in in 525) has only one element
After a fuck-tonne of Googling, I have a temporary workaround:
sudo rmmod psmouse
sudo modprobe psmouse
Simply unloading and reloading the mouse kernel module fixes the problem. This
seems to be a kernel driver bug.
--
You received this bug notification because you are a member of
Also apparent in 14.04 with Synaptics Touchpad. If the cursor is in
motion while the left touchpad button is pressed, the click event only
occurs after a long delay.
I've tried all sorts of synclient settings, nothing improves the
situation. Interestingly a USB mouse works fine, it's just the
Public bug reported:
This report was generated automatically when updating Ubuntu 14.04
ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: nvidia-331-uvm 331.113-0ubuntu0.0.4
ProcVersionSignature: Ubuntu 3.13.0-43.72-generic 3.13.11.11
Uname: Linux 3.13.0-43-generic x86_64
Public bug reported:
update not work
ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: kismet 2013.03.R1b-3
ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
Uname: Linux 3.16.0-28-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 2.14.7-0ubuntu8
AptOrdering:
ntpdate:
Public bug reported:
Msg appeared at boot...
ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: nvidia-331 331.113-0ubuntu0.1
ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
Uname: Linux 3.16.0-28-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.7-0ubuntu8
The bug has been partially taken care of. A recent file list does appear
when there is an already opened file, but no such list appear when
evince does not have any file opened.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
affects ubuntu/i3
I can start only a terminal and applications from terminal, but dmenu does
not appear when I press Alt+d.
Version details:
$ i3 -v
i3 version 4.7.2 (2014-01-23, branch tags/4.7.2) © 2009-2013 Michael
Stapelberg and contributors
$ uname -a
Linux
Ondergetekende: Physically is there *anything* different between the nodes in
your #33 that exhibited no errors and those that exhibited a lot? CPU
model/vendor, number of sockets, system vendor etc?
(I'm wondering about a synchronised/unsynchronised tsc type issue).
--
You received this bug
Ondergetekende: Physically is there *anything* different between the nodes in
your #33 that exhibited no errors and those that exhibited a lot? CPU
model/vendor, number of sockets, system vendor etc?
(I'm wondering about a synchronised/unsynchronised tsc type issue).
--
You received this bug
Also does not work for me anymore ever since the update to 14.04. Have
to reboot to Windows to use the device.
scanimage -L does list the device at first, it also is listed (always)
doing an lsusb. Trying to use a scanning application (skanlite, xsane or
vuescan) each app is not able to find the
I solved my problem by redownloading the firmware file which I had place
in /etc/sane.d. The file that works for me :
fc6ef4674ffe8d2afa403f79cc8dbc0e esfw30.bin
Scanning works now.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Apparently Resolved by 14.04
14.04 installed normally on asus-1215b
On Wed, Jun 25, 2014 at 5:30 PM, Brad Figg brad.f...@canonical.com wrote:
This bug is missing log files that will aid in diagnosing the problem.
From a terminal window please run:
apport-collect 879858
and then change
I switch to antergos linux. There ist no problem printig on CP510 via
gutenprint.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1256832
Title:
Canon Selphy CP510 not recognised by CUPS
To manage
Public bug reported:
Hi
I am having trouble with version 4.0.4. Ie. it does not work.
I wanted to install version 3, but found that libzmq3 has been replaced
by version 4.
Please have two packages, libzmq3 for version 3 and libzmq4 for 4.
Thanks
** Affects: zeromq3 (Ubuntu)
Importance:
Turns out my problem turned out to be somewhere else and I noticed upstream had
not updated their so numbers even.
Still, a confusing situation, the mismatching numbers, but not a bug as such.
** Changed in: zeromq3 (Ubuntu)
Status: New = Invalid
--
You received this bug notification
I can say the title of this bug matches the error I've been getting
exactly.
This has been a long standing annoyance that I hope will entertain
somebody solving it. :)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Affects me too. Stock upgrade from 13.10 to 14.04.
The arrogance and buck-passing behaviour of the Ubuntu devs on here is
astounding.
This is a very definite critical bug where the update process is failing
to handle what seems to be a common situation. Stop arguing and start
fixing, there
xfce power management does not function correctly. Screen cannot be
dimmed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1067749
Title:
Screen refuses to dim on battery
To manage notifications
Public bug reported:
Fixing ATI graphics driver issue caused by upgrade to 13.04. Radeon
4650. Ubuntu 13.04 64bit.
Following guide: http://askubuntu.com/questions/129597/how-do-i-fix-my-
installation-of-ati-catalyst-video-driver-in-12-04-lts/218894#218894
ProblemType: Package
DistroRelease:
Public bug reported:
After enabling radeon.dpm=1 the machine does not come back from S3.
ProblemType: KernelOops
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-5-generic 3.13.0-5.20
ProcVersionSignature: Ubuntu 3.13.0-5.20-generic 3.13.0
Uname: Linux 3.13.0-5-generic x86_64
Annotation:
Ahren Fitzroy's solution worked perfectly for me a year and a half on!
Thank you!
Much better than the useless forum threads that just tail off and the
bug reports that have gone unanswered by Canonical.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
LinkedIn
Bug,
I'd like to add you to my professional network on LinkedIn.
- Dr.Sandeep
Dr.Sandeep Shah
owner at Dr Shahs Panchkarma Ayurveda Clinic
Indore Area, India
Confirm that you know Dr.Sandeep Shah:
https://www.linkedin.com/e/rwezw7-hqgxm1p1-9/isd/19362851358/AOHq5fyc/?hs
I found a long discussion on one website, that gutenprint hat developed
an better backend for the canon Selphy printer. There for CUPS may not
include a backend for that printers.
http://gutenprint.996281.n3.nabble.com/Updated-spooler-for-Canon-Selphy-
dye-sub-printers-td6198.html
And indeed, I
Affects me too.
HP Pavilion G6
Ubuntu 13.10 64bit
Intel® Core™ i5-3210M CPU
(Intel HD graphics)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1177358
Title:
black line garbage flickers onto screen
Public bug reported:
The USB Canon photo printer CP510 is not recognised by CUPS any more. I
found a gutenprint driver for that printer in the list. But that is
worthless, if CUPS dose not see the printer.
I'm actually using a system with ubuntu-gnome-13.10-desktop-amd64
The following
Public bug reported:
Hello
I tried to make a printout of the german 13.04 manual from the download of the
printer friendly version, using a HP color LaserJet 2600nse, running Ubuntu
13.10, using the printer drivers provided. The printout quality is poor, normal
printing seem to have a
How was this not a blocker for release? We're talking about impacting
every single Ubuntu user that suspends their computer, and the entire
goal of Ubuntu is to make Linux easier for the average user! I happen to
be knowledgeable enough to know NM has a power state within itself that
I can set. My
that: That error indicates the issue happened during suspend/hibernate.
NetworkManager never completed or reported completion of the sleep task
it was sent. Could be why it never got woken up.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
subprocess installed post-installation script returned error exit status
1
** Affects: update-manager (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
On Ubuntu 13.04
stunnel4 version 3:4.53-1
I have to *.conf files in /etc/stunnel/ but only one gets started by the
init.d script.
Ie.:
$ sudo service stunnel4 start
Starting SSL tunnels: [Already running: /etc/stunnel/nfs.conf] [Already
running: /etc/stunnel/redis.conf]
CLUE:
Tried the chrooted grub reintall and manual fix procedures at
http://superuser.com/questions/376470/how-to-reinstall-grub2-efi
apt-get install --reinstall grub-efi-amd64 fails with Killed and
an error about missing systemd
/bin/efibootmgr is present in the chrooted environment
manual
401 - 500 of 1730 matches
Mail list logo
