[Bug 1568429] Re: 1002:68b8 Radeon won't work with KMS enabled
Good news: I have a had a small eureka moment that results my computer fully booted with graphics hardware fully accelerated. Bad news: it is still a workaround -- I still can't push power button and boot up normally. Here is the workaround sequence -- it requires another computer that can ssh in: 1. Computer in OFF state, press power. 2. At boot select screen, press `e` and edit kernel line by appending `modprobe.blacklist=radeon` 3. Press `F10` to boot 4. At login screen, click gear icon in upper right and select `Suspend` 5. After computer is in suspended state, press any key to awaken. 6. The display does not "reawaken" and still appears off. 7. From another computer, ssh into the first. 8. Issue `sudo service lightdm stop` 9. Issue `sudo modprobe radeon`. This should succeed! \o/ 10. Issue `sudo service lightdm start` Now the computer should be using correct drm drivers and have full resolution display. Furthermore, Suspend and Wake work successfully. I discovered this using ubuntu mainline kernel 4.8.0-rc5 but have verified it works with mainline 4.8.6 and also with 4.4.0-45. Unfortunately, I am also using the oibaf/graphics-drivers PPA with more recent mesa and libdrm drivers. I plan to test again after removing the PPA but it may take a while. If anyone with this problem is still watching, I'd be curious to hear if my workaround steps work for you. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: 1002:68b8 Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] Re: 1002:68b8 Radeon won't work with KMS enabled
I meant XFX 5770 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: 1002:68b8 Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] Re: 1002:68b8 Radeon won't work with KMS enabled
Thanks for the information seeker5528. Unfortunately for me, I'm not seeing similar results. My XFX 5570 only has DVI, HDMI and HDCP outputs. I just tested both DVI and HDMI alone and still the same issue for each. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: 1002:68b8 Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] Re: 1002:68b8 Radeon won't work with KMS enabled
I receive: mount: can't find /root in /proc/mounts `more /proc/mounts` shows: rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,nosuid,relatime,size=4067424k,nr_inodes-1016856,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,noexec,relatime,size=817336k,mode=755 0 0 this is at initramfs shell on break=top -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: 1002:68b8 Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] Re: 1002:68b8 Radeon won't work with KMS enabled
"debug break" => black screen, not responsive, no initramfs shell "debug break=modules" => black screen, not responsive, no initramfs shell "debug break=top" => initramfs shell but I haven't figured out how to mount a read-write filesystem to persist the initramfs.debug or dmesg output, yet. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: 1002:68b8 Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] Re: 1002:68b8 Radeon won't work with KMS enabled
I'm still unable to boot following the linked directions by removing the vt_handoff, quiet, and splash kernel params and also setting gfxmode to "text". It follows nearly the same behavior black screen, constant hdd activity light on -- the monitor however still detects an input signal, it's just black. I can boot by using the linked method but also supplying radeon.modeset=0 flag. I'm attaching the dmesg log from that boot up. I'm assuming dmesg output is the "missing information" requested. If there is something else missing please let me know. ** Attachment added: "dmesg-debug.log" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+attachment/4706595/+files/dmesg-debug.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: 1002:68b8 Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] Re: Radeon won't work with KMS enabled
Chistopher Penalver, it is hard to say as this is the first release where I can no longer use Catalyst -- I have been using the the binary drivers before this release. I remember my upgrading from 15.04 to 15.10 having a similar looking issue until I reinstalled the binary drivers. I never tried modesetting kernel parameters at that time so I can't say 100% if the error was the same. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568211] Re: Unable to boot
Is there a big difference between bug #1568429 and this one? If not, I've attached all the apport data I know how to on that bug and am willing to run commands / help debug if devs with more know-how can point me in right direction... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568211 Title: Unable to boot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1568211/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] Re: Radeon won't work with KMS enabled
Is there anything more I can do to help debug this? In my latest attempt to get any useful information, I removed my usb keyboard in favor of a ps2 one. On boot and subsequent fail, the caps lock and scroll lock flash 10 times. I thought maybe getting a serial console going would help but this computer doesn't have a db9/rs232 port and it appears to be failing before the USB subsystem is initialized so USB serial console appears to be a no-go. I'm pretty new / green on debugging at this low a level, but I'm willing to give it a go if anyone has ideas to try... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] Re: Radeon won't work with KMS enabled
Yes, Catalyst has been the only driver that has been working for me so far. I don't believe the radeon driver was working before either, I remember having a similar problem when I upgraded to 15.10. Thanks for the debugging tip. However it didn't work. Immediately after running the modprobe command the screens go blank, lose signal input, and then after about 5 seconds the machine reboots. After logging in again, I found that dmesg didn't have a chance to pipe its output to the file either. Definitely seems to be a bug closer to the kernel / drm -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568211] Re: no UMS support in radeon module
apport-collect strongly suggested I file a new bug. I filed at (bug #1568429) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568211 Title: no UMS support in radeon module To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1568211/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568429] [NEW] Radeon won't work with KMS enabled
Public bug reported: I have a Radeon HD 5770 GPU. After upgrading to Xenial today and ensuring the xorg radeon driver was enabled, my machine will no longer boot to a usable state. After selecting default Ubuntu option from GRUB menu, both monitor lose signal input and the keyboard becomes unresponsive. Sometimes the machine will reboot on its own, most of the time I have to hard reset. If I add `nomodeset` or `radeon.modeset=0` to kernel line in GRUB, the machine will boot but the radeon driver will not load. Attempting to load radeon driver with `sudo modprobe radeon modeset=1` after booting with modesetting off results in the same fail state explained above. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6 Uname: Linux 4.4.0-18-generic x86_64 .tmp.unity.support.test.1: ApportVersion: 2.20.1-0ubuntu1 Architecture: amd64 CompizPlugins: [core,bailer,detection,composite,opengl,compiztoolbox,decor,grid,mousepoll,widget,regex,vpswitch,resize,imgpng,place,gnomecompat,wall,move,animation,fade,snap,expo,scale,unitymtgrabhandles,ezoom,session,workarounds] CompositorRunning: None Date: Sat Apr 9 20:02:22 2016 DistUpgraded: 2016-04-09 16:49:55,340 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Failed to execute child process "./xorg_fix_proprietary.py" (No such file or directory) (8)) DistroCodename: xenial DistroVariant: ubuntu DkmsStatus: vboxhost, 5.0.12, 4.2.0-35-generic, x86_64: installed vboxhost, 5.0.12, 4.4.0-18-generic, x86_64: installed ExtraDebuggingInterest: Yes GpuHangFrequency: Continuously GpuHangReproducibility: Yes, I can easily reproduce it GpuHangStarted: Immediately after installing this version of Ubuntu GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770] [1002:68b8] (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Juniper XT [Radeon HD 5770] [1682:2990] InstallationDate: Installed on 2013-12-29 (832 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-18-generic root=UUID=e7310b2e-03b9-4e94-ba8a-d384330592cf ro quiet splash radeon.modeset=0 Renderer: Software SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: Upgraded to xenial on 2016-04-09 (0 days ago) dmi.bios.date: 04/29/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0519 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P5N7A-VM dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0519:bd04/29/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5N7A-VM:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.12.2+16.04.20160331-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Sat Apr 9 19:49:46 2016 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.18.3-1ubuntu2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug freeze kms radeon ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568429 Title: Radeon won't work with KMS enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1568429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1568211] Re: no UMS support in radeon module
I am also affected by this bug after upgrading to Xenial and trying to use radeon KMS. My system will only boot with `nomodeset` or `radeon.modeset=0`. Futhermore, attempting `sudo modprobe radeon modeset=1` after booting with `nomodeset` results in the same error state: screen goes blank, monitor's "No signal detected" message appears. Sometimes the machine reboots, but not always. I have a Radeon HD5770 card. I will try to attach logs via apport -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1568211 Title: no UMS support in radeon module To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1568211/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs