I guess theres one more "Me Too" with me. Regardless of the kill switch settings I can't get any network as dhcpcd / dhclient won't get me an address regardless. Using the rmmod / modprobe steps above will make the option in network-manager highlighted instead of grayed out but touching and of the settings just puts it back to the way it was(disabled). Manually using ifconifg / iwconfig / (dhcpcd | dhclient) output is below any other info needed just let me know.
fu...@fusco-laptop:/$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:1b:77:34:ac:9e BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) fu...@fusco-laptop:/$ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such device fu...@fusco-laptop:/$ sudo iwconfig wlan0 essid ****** key ************************** fu...@fusco-laptop:/$ sudo dhclient wlan0 Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 SIOCSIFFLAGS: No such device SIOCSIFFLAGS: No such device wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:1b:77:34:ac:9e Sending on LPF/wlan0/00:1b:77:34:ac:9e Sending on Socket/fallback receive_packet failed on wlan0: Network is down DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 send_packet: Network is down DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4 send_packet: Network is down ^C fu...@fusco-laptop:/$ sudo dhc dhclient dhclient3 dhclient-script dhcpcd dhcpcd-bin fu...@fusco-laptop:/$ sudo dhcpcd wlan0 err, wlan0: ioctl SIOCSIFFLAGS: No such device I'm running a Compaq nc4400 laptop #uname -a Linux fusco-laptop 2.6.28-8-generic #24-Ubuntu SMP Wed Feb 18 20:36:18 UTC 2009 x86_64 GNU/Linux fu...@fusco-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01) 02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 02:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) 02:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21) 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) dmesg [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-8-generic (bui...@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-3ubuntu5) ) #24-Ubuntu SMP Wed Feb 18 20:36:18 UTC 2009 (Ubuntu 2.6.28-8.24-generic) [ 0.000000] Command line: root=UUID=2840aa12-a01d-411c-a35e-7230575a2a76 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable) [ 0.000000] BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved) [ 0.000000] BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3f7d0 max_arch_pfn = 0x3ffffffff [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000008000 (usable) [ 0.000000] modified: 0000000000008000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f7d0000 (usable) [ 0.000000] modified: 000000003f7d0000 - 000000003f7e5600 (reserved) [ 0.000000] modified: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS) [ 0.000000] modified: 000000003f7f8000 - 000000003f800000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-000000003f7d0000 [ 0.000000] 0000000000 - 003f600000 page 2M [ 0.000000] 003f600000 - 003f7d0000 page 4k [ 0.000000] kernel direct mapping tables up to 3f7d0000 @ 10000-13000 [ 0.000000] last_map_addr: 3f7d0000 end: 3f7d0000 [ 0.000000] RAMDISK: 37843000 - 37fef9ee [ 0.000000] ACPI: RSDP 000F7890, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT 3F7E57C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: FACP 3F7E5684, 00F4 (r4 HP 30B1 3 HP 1) [ 0.000000] ACPI: DSDT 3F7E5ACC, 10108 (r1 HP tc4400 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 3F7F7E80, 0040 [ 0.000000] ACPI: SLIC 3F7E5844, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: HPET 3F7E59BC, 0038 (r1 HP 30B1 1 HP 1) [ 0.000000] ACPI: APIC 3F7E59F4, 0068 (r1 HP 30B1 1 HP 1) [ 0.000000] ACPI: MCFG 3F7E5A5C, 003C (r1 HP 30B1 1 HP 1) [ 0.000000] ACPI: TCPA 3F7E5A98, 0032 (r2 HP 30B1 1 HP 1) [ 0.000000] ACPI: SSDT 3F7F5BD4, 0059 (r1 HP HPQNLP 1 MSFT 100000E) [ 0.000000] ACPI: SSDT 3F7F5C2D, 0326 (r1 HP HPQSAT 1 MSFT 100000E) [ 0.000000] ACPI: SSDT 3F7F67A8, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT 3F7F6A07, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT 3F7F6AAD, 04D7 (r1 HP CpuPm 3000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 003f7d0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b663b0] TEXT DATA BSS ==> [0000200000 - 0000b663b0] [ 0.000000] #3 [0037843000 - 0037fef9ee] RAMDISK ==> [0037843000 - 0037fef9ee] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x00000008 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0003f7d0 [ 0.000000] On node 0 totalpages: 259925 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2506 pages reserved [ 0.000000] DMA zone: 1411 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3500 pages used for memmap [ 0.000000] DMA32 zone: 252452 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000) [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253863 [ 0.000000] Kernel command line: root=UUID=2840aa12-a01d-411c-a35e-7230575a2a76 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.788 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] allocated 10485760 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 995416k/1040192k available (4659k kernel code, 492k absent, 43860k reserved, 2524k data, 532k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.57 BogoMIPS (lpj=7979152) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20080926 [ 0.010175] ACPI: Checking initramfs for custom DSDT [ 0.368055] Setting APIC routing to flat [ 0.368511] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.410935] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 0.412001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980085) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.496716] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 0.496742] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.500055] Brought up 2 CPUs [ 0.500057] Total of 2 processors activated (7979.61 BogoMIPS). [ 0.500111] CPU0 attaching sched-domain: [ 0.500113] domain 0: span 0-1 level MC [ 0.500116] groups: 0 1 [ 0.500122] CPU1 attaching sched-domain: [ 0.500124] domain 0: span 0-1 level MC [ 0.500125] groups: 1 0 [ 0.500196] net_namespace: 1400 bytes [ 0.500196] Booting paravirtualized kernel on bare hardware [ 0.500242] Time: 2:37:22 Date: 02/19/09 [ 0.500242] regulator: core version 0.5 [ 0.500242] NET: Registered protocol family 16 [ 0.500242] ACPI: bus type pci registered [ 0.500242] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.500242] PCI: Not using MMCONFIG. [ 0.500242] PCI: Using configuration type 1 for base access [ 0.505114] ACPI: EC: Look up EC in DSDT [ 0.509825] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.604480] ACPI: Interpreter enabled [ 0.604484] ACPI: (supports S0 S3 S4 S5) [ 0.604499] ACPI: Using IOAPIC for interrupt routing [ 0.604565] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.613208] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources [ 0.615844] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.628153] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.628153] ACPI: EC: driver started in interrupt mode [ 0.628219] ACPI: No dock devices found. [ 0.628229] ACPI: PCI Root Bridge [C002] (0000:00) [ 0.628255] pci 0000:00:02.0: reg 10 32bit mmio: [0xf4600000-0xf467ffff] [ 0.628255] pci 0000:00:02.0: reg 14 io port: [0x4000-0x4007] [ 0.628255] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff] [ 0.628255] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf4680000-0xf46bffff] [ 0.628255] pci 0000:00:02.1: reg 10 32bit mmio: [0xf4700000-0xf477ffff] [ 0.628255] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4780000-0xf4783fff] [ 0.628280] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.628285] pci 0000:00:1b.0: PME# disabled [ 0.628349] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.628354] pci 0000:00:1c.0: PME# disabled [ 0.628420] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.628425] pci 0000:00:1c.1: PME# disabled [ 0.628493] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.628498] pci 0000:00:1c.3: PME# disabled [ 0.628561] pci 0000:00:1d.0: reg 20 io port: [0x4020-0x403f] [ 0.628621] pci 0000:00:1d.1: reg 20 io port: [0x4040-0x405f] [ 0.628681] pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f] [ 0.628741] pci 0000:00:1d.3: reg 20 io port: [0x4080-0x409f] [ 0.628806] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4784000-0xf47843ff] [ 0.628852] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.628857] pci 0000:00:1d.7: PME# disabled [ 0.629013] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.629017] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.629052] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.629060] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.629067] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.629075] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.629082] pci 0000:00:1f.1: reg 20 io port: [0x40a0-0x40af] [ 0.629143] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] [ 0.629151] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] [ 0.629158] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] [ 0.629165] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] [ 0.629173] pci 0000:00:1f.2: reg 20 io port: [0x40d0-0x40df] [ 0.629180] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4785000-0xf47853ff] [ 0.629200] pci 0000:00:1f.2: PME# supported from D3hot [ 0.629204] pci 0000:00:1f.2: PME# disabled [ 0.629298] pci 0000:08:00.0: reg 10 64bit mmio: [0xf4100000-0xf410ffff] [ 0.629355] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.629361] pci 0000:08:00.0: PME# disabled [ 0.629430] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4100000-0xf41fffff] [ 0.629579] pci 0000:10:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff] [ 0.629741] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.629754] pci 0000:10:00.0: PME# disabled [ 0.629859] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xf40fffff] [ 0.629923] pci 0000:00:1c.3: bridge io port: [0x2000-0x3fff] [ 0.629928] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.629997] pci 0000:02:06.0: reg 10 32bit mmio: [0xf4200000-0xf4200fff] [ 0.630011] pci 0000:02:06.0: supports D1 D2 [ 0.630013] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot [ 0.630018] pci 0000:02:06.0: PME# disabled [ 0.630073] pci 0000:02:06.2: reg 10 32bit mmio: [0xf4201000-0xf4201fff] [ 0.630133] pci 0000:02:06.2: supports D1 D2 [ 0.630134] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot [ 0.630140] pci 0000:02:06.2: PME# disabled [ 0.630192] pci 0000:02:06.3: reg 10 32bit mmio: [0xf4202000-0xf42020ff] [ 0.630253] pci 0000:02:06.3: supports D1 D2 [ 0.630254] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot [ 0.630260] pci 0000:02:06.3: PME# disabled [ 0.630312] pci 0000:02:06.4: reg 10 32bit mmio: [0xf4203000-0xf4203fff] [ 0.630322] pci 0000:02:06.4: reg 14 32bit mmio: [0xf4204000-0xf4204fff] [ 0.630373] pci 0000:02:06.4: supports D1 D2 [ 0.630375] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot [ 0.630380] pci 0000:02:06.4: PME# disabled [ 0.630445] pci 0000:00:1e.0: transparent bridge [ 0.630452] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4200000-0xf45fffff] [ 0.630508] bus 00 -> node 0 [ 0.630515] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] [ 0.630838] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT] [ 0.632161] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C101._PRT] [ 0.632317] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C111._PRT] [ 0.632467] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C117._PRT] [ 0.664175] ACPI: PCI Interrupt Link [C10D] (IRQs *10 11) [ 0.664401] ACPI: PCI Interrupt Link [C10E] (IRQs *10 11) [ 0.664640] ACPI: PCI Interrupt Link [C10F] (IRQs 10 *11) [ 0.664878] ACPI: PCI Interrupt Link [C110] (IRQs 10 11) *5 [ 0.665118] ACPI: PCI Interrupt Link [C123] (IRQs *10 11) [ 0.665355] ACPI: PCI Interrupt Link [C124] (IRQs *10 11) [ 0.665592] ACPI: PCI Interrupt Link [C125] (IRQs 10 *11) [ 0.665702] ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080926] [ 0.665823] ACPI: Power Resource [C1EF] (on) [ 0.665823] ACPI: Power Resource [C1F6] (on) [ 0.665823] ACPI: Power Resource [C220] (on) [ 0.665823] ACPI: Power Resource [C228] (on) [ 0.665823] ACPI: Power Resource [C329] (off) [ 0.665823] ACPI: Power Resource [C32A] (off) [ 0.665823] ACPI: Power Resource [C32B] (off) [ 0.665823] ACPI: Power Resource [C32C] (off) [ 0.668285] ACPI: WMI: Mapper loaded [ 0.668285] SCSI subsystem initialized [ 0.668285] libata version 3.00 loaded. [ 0.668285] usbcore: registered new interface driver usbfs [ 0.668285] usbcore: registered new interface driver hub [ 0.668285] usbcore: registered new device driver usb [ 0.668285] PCI: Using ACPI for IRQ routing [ 0.684029] Bluetooth: Core ver 2.13 [ 0.684041] NET: Registered protocol family 31 [ 0.684041] Bluetooth: HCI device and connection manager initialized [ 0.684041] Bluetooth: HCI socket layer initialized [ 0.684041] NET: Registered protocol family 8 [ 0.684041] NET: Registered protocol family 20 [ 0.684044] NetLabel: Initializing [ 0.684044] NetLabel: domain hash size = 128 [ 0.684044] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.684044] NetLabel: unlabeled traffic allowed by default [ 0.684048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.684051] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.688063] AppArmor: AppArmor Filesystem Enabled [ 0.692011] Switched to high resolution mode on CPU 0 [ 0.692782] Switched to high resolution mode on CPU 1 [ 0.704009] pnp: PnP ACPI init [ 0.704019] ACPI: bus type pnp registered [ 0.715277] pnp: PnP ACPI: found 16 devices [ 0.715279] ACPI: ACPI bus type pnp unregistered [ 0.715288] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.715290] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.715293] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved [ 0.715302] system 00:0c: ioport range 0x500-0x55f has been reserved [ 0.715305] system 00:0c: ioport range 0x800-0x80f has been reserved [ 0.715307] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.715310] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.715315] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 0.715317] system 00:0e: ioport range 0x1000-0x107f has been reserved [ 0.715319] system 00:0e: ioport range 0x1100-0x113f has been reserved [ 0.715322] system 00:0e: ioport range 0x1200-0x121f has been reserved [ 0.715324] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.715326] system 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved [ 0.715329] system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.715331] system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.715333] system 00:0e: iomem range 0xfed90000-0xfed9afff has been reserved [ 0.715338] system 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved [ 0.715340] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.720524] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.720526] pci 0000:00:1c.0: IO window: disabled [ 0.720532] pci 0000:00:1c.0: MEM window: 0xf4100000-0xf41fffff [ 0.720537] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.720544] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 [ 0.720546] pci 0000:00:1c.1: IO window: disabled [ 0.720552] pci 0000:00:1c.1: MEM window: 0xf4000000-0xf40fffff [ 0.720556] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.720563] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20 [ 0.720566] pci 0000:00:1c.3: IO window: 0x2000-0x3fff [ 0.720572] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf3ffffff [ 0.720577] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.720586] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.720588] pci 0000:02:06.0: IO window: 0x005000-0x0050ff [ 0.720593] pci 0000:02:06.0: IO window: 0x005400-0x0054ff [ 0.720599] pci 0000:02:06.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.720605] pci 0000:02:06.0: MEM window: 0x44000000-0x47ffffff [ 0.720610] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.720613] pci 0000:00:1e.0: IO window: 0x5000-0x5fff [ 0.720619] pci 0000:00:1e.0: MEM window: 0xf4200000-0xf45fffff [ 0.720624] pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x00000043ffffff [ 0.720641] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.720647] pci 0000:00:1c.0: setting latency timer to 64 [ 0.720656] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.720660] pci 0000:00:1c.1: setting latency timer to 64 [ 0.720670] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.720675] pci 0000:00:1c.3: setting latency timer to 64 [ 0.720682] pci 0000:00:1e.0: setting latency timer to 64 [ 0.720693] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.720700] bus: 00 index 0 io port: [0x00-0xffff] [ 0.720702] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.720703] bus: 08 index 0 mmio: [0x0-0x0] [ 0.720705] bus: 08 index 1 mmio: [0xf4100000-0xf41fffff] [ 0.720707] bus: 08 index 2 mmio: [0x0-0x0] [ 0.720708] bus: 08 index 3 mmio: [0x0-0x0] [ 0.720710] bus: 10 index 0 mmio: [0x0-0x0] [ 0.720712] bus: 10 index 1 mmio: [0xf4000000-0xf40fffff] [ 0.720713] bus: 10 index 2 mmio: [0x0-0x0] [ 0.720715] bus: 10 index 3 mmio: [0x0-0x0] [ 0.720717] bus: 20 index 0 io port: [0x2000-0x3fff] [ 0.720718] bus: 20 index 1 mmio: [0xf0000000-0xf3ffffff] [ 0.720720] bus: 20 index 2 mmio: [0x0-0x0] [ 0.720721] bus: 20 index 3 mmio: [0x0-0x0] [ 0.720723] bus: 02 index 0 io port: [0x5000-0x5fff] [ 0.720725] bus: 02 index 1 mmio: [0xf4200000-0xf45fffff] [ 0.720727] bus: 02 index 2 mmio: [0x40000000-0x43ffffff] [ 0.720728] bus: 02 index 3 io port: [0x00-0xffff] [ 0.720730] bus: 02 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.720732] bus: 03 index 0 io port: [0x5000-0x50ff] [ 0.720734] bus: 03 index 1 io port: [0x5400-0x54ff] [ 0.720736] bus: 03 index 2 mmio: [0x40000000-0x43ffffff] [ 0.720737] bus: 03 index 3 mmio: [0x44000000-0x47ffffff] [ 0.720746] NET: Registered protocol family 2 [ 0.760048] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.760320] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.761209] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.761746] TCP: Hash tables configured (established 131072 bind 65536) [ 0.761749] TCP reno registered [ 0.772094] NET: Registered protocol family 1 [ 0.772220] checking if image is initramfs... it is [ 1.479903] Freeing initrd memory: 7858k freed [ 1.485071] audit: initializing netlink socket (disabled) [ 1.485099] type=2000 audit(1235011042.484:1): initialized [ 1.493357] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.495957] VFS: Disk quotas dquot_6.5.1 [ 1.496222] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.497226] msgmni has been set to 1960 [ 1.497426] alg: No test for stdrng (krng) [ 1.497437] io scheduler noop registered [ 1.497439] io scheduler anticipatory registered [ 1.497441] io scheduler deadline registered [ 1.497508] io scheduler cfq registered (default) [ 1.497523] pci 0000:00:02.0: Boot video device [ 1.504995] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.505048] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.505086] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 1.505101] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.505144] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.505182] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.505285] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.505332] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.505364] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X [ 1.505379] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.505420] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.505460] pci_express 0000:00:1c.1:pcie03: allocate port service [ 1.505567] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.505614] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.505646] pcieport-driver 0000:00:1c.3: irq 2301 for MSI/MSI-X [ 1.505661] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.505701] pci_express 0000:00:1c.3:pcie02: allocate port service [ 1.505743] pci_express 0000:00:1c.3:pcie03: allocate port service [ 1.505909] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.506293] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.506769] ACPI: AC Adapter [C1B2] (on-line) [ 1.548982] ACPI: Battery Slot [C1B4] (battery present) [ 1.549197] ACPI: Battery Slot [C1B3] (battery absent) [ 1.549734] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.549737] ACPI: Power Button (FF) [PWRF] [ 1.549824] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.549827] ACPI: Sleep Button (CM) [C249] [ 1.549898] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.549973] ACPI: Lid Switch [C241] [ 1.550295] fan PNP0C0B:00: registered as cooling_device0 [ 1.550300] ACPI: Fan [C32D] (off) [ 1.550551] fan PNP0C0B:01: registered as cooling_device1 [ 1.550556] ACPI: Fan [C32E] (off) [ 1.550804] fan PNP0C0B:02: registered as cooling_device2 [ 1.550809] ACPI: Fan [C32F] (off) [ 1.551058] fan PNP0C0B:03: registered as cooling_device3 [ 1.551063] ACPI: Fan [C330] (off) [ 1.551771] ACPI: SSDT 3F7F601B, 023D (r1 HP Cpu0Ist 3000 INTL 20060317) [ 1.552281] ACPI: SSDT 3F7F62DD, 04CB (r1 HP Cpu0Cst 3001 INTL 20060317) [ 1.554676] Monitor-Mwait will be used to enter C-1 state [ 1.554679] Monitor-Mwait will be used to enter C-2 state [ 1.554722] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.554766] processor ACPI_CPU:00: registered as cooling_device4 [ 1.554769] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.555124] ACPI: SSDT 3F7F5F53, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) [ 1.555502] ACPI: SSDT 3F7F6258, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) [ 1.556496] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 1.556537] processor ACPI_CPU:01: registered as cooling_device5 [ 1.556541] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.562582] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.566744] ACPI: Thermal Zone [TZ0] (56 C) [ 1.577810] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.586064] ACPI: Thermal Zone [TZ1] (54 C) [ 1.596677] thermal LNXTHERM:03: registered as thermal_zone2 [ 1.604670] ACPI: Thermal Zone [TZ2] (44 C) [ 1.609912] thermal LNXTHERM:04: registered as thermal_zone3 [ 1.618034] ACPI: Thermal Zone [TZ3] (35 C) [ 1.619786] thermal LNXTHERM:05: registered as thermal_zone4 [ 1.623738] ACPI: Thermal Zone [TZ4] (20 C) [ 1.656399] Linux agpgart interface v0.103 [ 1.656404] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.656676] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 1.658801] brd: module loaded [ 1.659615] loop: module loaded [ 1.659855] Fixed MDIO Bus: probed [ 1.659862] PPP generic driver version 2.4.2 [ 1.660021] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.660077] Driver 'sd' needs updating - please use bus_type methods [ 1.660113] Driver 'sr' needs updating - please use bus_type methods [ 1.660210] ahci 0000:00:1f.2: version 3.0 [ 1.660230] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.660274] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X [ 1.660347] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.660350] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.660355] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.660480] scsi0 : ahci [ 1.660623] scsi1 : ahci [ 1.660737] scsi2 : ahci [ 1.660848] scsi3 : ahci [ 1.660968] ata1: SATA max UDMA/133 abar m1...@0xf4785000 port 0xf4785100 irq 2300 [ 1.660971] ata2: DUMMY [ 1.660972] ata3: DUMMY [ 1.660973] ata4: DUMMY [ 2.140021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.142584] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.142586] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 2.142644] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 2.142646] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.143390] ata1.00: ATA-7: ST980811AS, 3.BHD, max UDMA/100 [ 2.143392] ata1.00: 156301488 sectors, multi 16: LBA48 [ 2.145980] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.145983] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 2.146079] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 2.146082] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.146837] ata1.00: configured for UDMA/100 [ 2.161718] ata1.00: configured for UDMA/100 [ 2.161721] ata1: EH complete [ 2.161851] scsi 0:0:0:0: Direct-Access ATA ST980811AS 3.BH PQ: 0 ANSI: 5 [ 2.162044] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 2.162061] sd 0:0:0:0: [sda] Write Protect is off [ 2.162063] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.162087] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.162144] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 2.162158] sd 0:0:0:0: [sda] Write Protect is off [ 2.162160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.162183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.162186] sda: sda1 sda2 < sda5 > [ 2.208888] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.208995] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.209107] ata_piix 0000:00:1f.1: version 2.12 [ 2.209114] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.209148] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.209222] scsi4 : ata_piix [ 2.209347] scsi5 : ata_piix [ 2.209906] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14 [ 2.209909] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15 [ 2.375956] ata6: port disabled. ignoring. [ 2.377964] usbcore: registered new interface driver libusual [ 2.378048] usbcore: registered new interface driver usbserial [ 2.378085] USB Serial support registered for generic [ 2.378120] usbcore: registered new interface driver usbserial_generic [ 2.378122] usbserial: USB Serial Driver core [ 2.378226] PNP: PS/2 Controller [PNP0303:C21D,PNP0f13:C21E] at 0x60,0x64 irq 1,12 [ 2.380119] i8042.c: Detected active multiplexing controller, rev 1.1. [ 2.380929] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.380934] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.380936] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.380938] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.380940] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.392129] mice: PS/2 mouse device common for all mice [ 2.440126] rtc_cmos 00:08: RTC can wake from S4 [ 2.440180] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 2.440212] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.440333] device-mapper: uevent: version 1.0.3 [ 2.440472] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-de...@redhat.com [ 2.440544] device-mapper: multipath: version 1.0.5 loaded [ 2.440547] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.440827] cpuidle: using governor ladder [ 2.441279] cpuidle: using governor menu [ 2.441329] Marking TSC unstable due to TSC halts in idle [ 2.441747] TCP cubic registered [ 2.441854] NET: Registered protocol family 10 [ 2.442208] lo: Disabled Privacy Extensions [ 2.442468] NET: Registered protocol family 17 [ 2.442529] Bluetooth: L2CAP ver 2.11 [ 2.442531] Bluetooth: L2CAP socket layer initialized [ 2.442533] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.442535] Bluetooth: SCO socket layer initialized [ 2.442566] Bluetooth: RFCOMM socket layer initialized [ 2.442572] Bluetooth: RFCOMM TTY layer initialized [ 2.442574] Bluetooth: RFCOMM ver 1.10 [ 2.443408] registered taskstats version 1 [ 2.443525] Magic number: 13:192:612 [ 2.443552] tty tty: hash matches [ 2.443633] rtc_cmos 00:08: setting system clock to 2009-02-19 02:37:24 UTC (1235011044) [ 2.443636] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.443638] EDD information not available. [ 2.443682] Freeing unused kernel memory: 532k freed [ 2.443922] Write protecting the kernel read-only data: 6592k [ 2.472082] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.576673] fuse init (API version 7.10) [ 2.651562] tg3.c:v3.94 (August 14, 2008) [ 2.651596] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.651613] tg3 0000:08:00.0: setting latency timer to 64 [ 2.694391] uhci_hcd: USB Universal Host Controller Interface driver [ 2.694461] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.694477] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.694482] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.694565] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.694635] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020 [ 2.694724] usb usb1: configuration #1 chosen from 1 choice [ 2.694750] hub 1-0:1.0: USB hub found [ 2.694756] hub 1-0:1.0: 2 ports detected [ 2.694870] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 2.694886] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.694891] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.694938] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 2.695012] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004040 [ 2.695088] usb usb2: configuration #1 chosen from 1 choice [ 2.695109] hub 2-0:1.0: USB hub found [ 2.695114] hub 2-0:1.0: 2 ports detected [ 2.695200] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.695213] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.695220] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.695263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 2.695329] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060 [ 2.695413] usb usb3: configuration #1 chosen from 1 choice [ 2.695435] hub 3-0:1.0: USB hub found [ 2.695441] hub 3-0:1.0: 2 ports detected [ 2.695530] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.695548] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.695554] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.695594] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 2.695656] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080 [ 2.695736] usb usb4: configuration #1 chosen from 1 choice [ 2.695757] hub 4-0:1.0: USB hub found [ 2.695765] hub 4-0:1.0: 2 ports detected [ 2.696437] eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:f0:68:42 [ 2.696440] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 2.696442] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.704856] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.704859] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.704891] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.704918] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.704923] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.704981] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 2.708931] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.708945] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.708951] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4784000 [ 2.721026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.721092] usb usb5: configuration #1 chosen from 1 choice [ 2.721119] hub 5-0:1.0: USB hub found [ 2.721126] hub 5-0:1.0: 8 ports detected [ 3.333317] PM: Starting manual resume from disk [ 3.333322] PM: Resume from partition 8:5 [ 3.333325] PM: Checking hibernation image. [ 3.333450] PM: Resume from disk failed. [ 3.383427] kjournald starting. Commit interval 5 seconds [ 3.383453] EXT3-fs: mounted filesystem with ordered data mode. [ 3.388042] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 3.563812] usb 1-1: configuration #1 chosen from 1 choice [ 3.804118] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 3.972162] usb 2-1: configuration #1 chosen from 1 choice [ 9.921745] udev: starting version 137 [ 10.337062] cfg80211: Calling CRDA to update world regulatory domain [ 10.371503] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 10.371618] usbcore: registered new interface driver btusb [ 10.376131] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 10.377216] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 10.380537] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 10.389098] Registered led device: hp:red:hddprotection [ 10.389119] leds-hp-disk driver loaded. [ 10.409295] tpm_inf_pnp 00:04: Found C205 with ID IFX0102 [ 10.409350] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 10.465644] parport_pc 00:03: reported by Plug and Play ACPI [ 10.465729] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 10.473458] lis3lv02d driver loaded. [ 10.530522] acpi device:03: registered as cooling_device6 [ 10.530857] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5 [ 10.540997] intel_rng: FWH not detected [ 10.564069] ACPI: Video Device [C085] (multi-head: yes rom: no post: no) [ 10.752624] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 10.752627] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 10.752705] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.752718] iwl3945 0000:10:00.0: setting latency timer to 64 [ 10.752765] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 10.814582] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 10.820771] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 11.000744] cfg80211: World regulatory domain updated: [ 11.000747] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.000750] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.016303] sdhci: Secure Digital Host Controller Interface driver [ 11.016307] sdhci: Copyright(c) Pierre Ossman [ 11.118114] WARNING: synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 11.178993] sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0) [ 11.179020] sdhci-pci 0000:02:06.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 11.179147] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 11.323072] iTCO_vendor_support: vendor-support=0 [ 11.326401] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 [ 11.326551] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 11.326643] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.338961] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 11.354218] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 [ 11.354227] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 11.376703] ppdev: user-space parallel port driver [ 11.399991] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 11.421759] tifm_7xx1 0000:02:06.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.439833] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30b1] [ 11.439863] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions [ 11.439871] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI [ 11.439875] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 11.439884] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64 [ 11.462539] iwl3945 0000:10:00.0: PCI INT A disabled [ 11.673229] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18 [ 11.673235] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 11.673240] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 11.673249] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 11.673253] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff [ 11.673257] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 11.783820] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 11.783836] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.783938] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.225577] lp0: using parport0 (interrupt-driven). [ 12.418262] Adding 2939852k swap on /dev/sda5. Priority:-1 extents:1 across:2939852k [ 12.690500] WARNING: synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 13.023101] EXT3 FS on sda1, internal journal [ 14.236560] type=1505 audit(1235011056.292:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2621 [ 14.349814] type=1505 audit(1235011056.404:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2625 [ 14.350001] type=1505 audit(1235011056.404:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2625 [ 14.350090] type=1505 audit(1235011056.404:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2625 [ 14.564969] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64. [ 14.596636] type=1505 audit(1235011056.652:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2630 [ 14.596820] type=1505 audit(1235011056.652:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2630 [ 14.630841] type=1505 audit(1235011056.684:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2634 [ 16.952203] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input8 [ 19.471662] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.471667] Bluetooth: BNEP filters: protocol multicast [ 19.525403] Bridge firewalling registered [ 23.615565] [drm] Initialized drm 1.1.0 20060810 [ 23.632974] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.632983] pci 0000:00:02.0: setting latency timer to 64 [ 23.633210] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 23.944060] tg3 0000:08:00.0: irq 2299 for MSI/MSI-X [ 24.140230] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.161078] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 24.161231] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 24.161417] iwl3945 0000:10:00.0: irq 2298 for MSI/MSI-X [ 24.161514] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-1.ucode [ 24.267872] Registered led device: iwl-phy0:radio [ 24.267941] Registered led device: iwl-phy0:assoc [ 24.267958] Registered led device: iwl-phy0:RX [ 24.267972] Registered led device: iwl-phy0:TX [ 24.284898] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.945476] wlan0: authenticate with AP 00:1e:58:23:2f:13 [ 24.947908] wlan0: authenticated [ 24.947913] wlan0: associate with AP 00:1e:58:23:2f:13 [ 25.148047] wlan0: associate with AP 00:1e:58:23:2f:13 [ 25.344050] wlan0: associate with AP 00:1e:58:23:2f:13 [ 25.544045] wlan0: association with AP 00:1e:58:23:2f:13 timed out [ 28.444316] warning: `pulseaudio' uses 32-bit capabilities (legacy support in use) [ 28.980973] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 28.980979] tg3: eth0: Flow control is on for TX and on for RX. [ 28.981014] iwl3945: Radio Frequency Kill Switch is On: [ 28.981016] Kill switch must be turned off for wireless networking to work. [ 28.981768] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.947907] wlan0: authenticate with AP 00:1e:58:23:2f:13 [ 32.016024] iwl3945: MAC is in deep sleep! [ 32.063577] iwl3945: MAC is in deep sleep! [ 32.113281] iwl3945: MAC is in deep sleep! [ 32.269243] iwl3945 0000:10:00.0: PCI INT A disabled [ 39.692020] eth0: no IPv6 routers present [ 232.068566] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 232.068571] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 232.068666] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 232.068689] iwl3945 0000:10:00.0: setting latency timer to 64 [ 232.068816] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 232.111804] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 232.114382] phy1: Selected rate control algorithm 'iwl-3945-rs' [ 235.948659] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 235.948995] iwl3945 0000:10:00.0: irq 2298 for MSI/MSI-X [ 235.949127] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-1.ucode [ 235.956671] iwl3945: Radio disabled by HW RF Kill switch [ 253.972331] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 253.972684] iwl3945 0000:10:00.0: irq 2298 for MSI/MSI-X [ 253.972793] iwl3945: Radio disabled by HW RF Kill switch [ 419.272108] usb 1-1: USB disconnect, address 2 [ 419.272165] btusb_intr_complete: hci0 urb ffff88003cd57cc0 failed to resubmit (19) [ 419.274653] btusb_send_frame: hci0 urb ffff880034884c00 submission failed [ 424.880060] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 425.053219] usb 1-1: configuration #1 chosen from 1 choice [ 1140.791606] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1140.791943] iwl3945 0000:10:00.0: irq 2298 for MSI/MSI-X [ 1140.792110] iwl3945: Radio disabled by HW RF Kill switch -- iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch https://bugs.launchpad.net/bugs/193970 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs