[Bug 1580123] Re: xrandr --scale (again) confines mouse to native solution
It would be very helpful for users on LTS systems if xserver-xorg-core version 1.20 would be backported (currently 1.19 on bionic/18.04). This bug basically affects everyone with a high dpi system and an external screen because this setup requires scaling the screen to work. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1580123 Title: xrandr --scale (again) confines mouse to native solution To manage notifications about this bug go to: https://bugs.launchpad.net/xorg-server/+bug/1580123/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1764806] [NEW] urfkilld segfault wifi function (Dell XPS 13 9350)
Public bug reported: With kernel 4.4.0-119-generic on Ubuntu 16.04.4 LTS (xenial) x86_64 and included intel_hid driver (which seems to be responsible for the key events), I get the following report when pressing the function key Fn+PrtScr which is supposed to trigger the wifi blocking state using rfkill interface via urfkilld daemon: Apr 17 19:02:45 aton kernel: [ 387.963583] urfkilld[3119]: segfault at 18 ip 55948349f46b sp 7ffd26296730 error 4 in urfkilld[559483495000+19000] Apr 17 19:02:46 aton NetworkManager[1099]: [1523984566.0332] urfkill disappeared from the bus Apr 17 19:02:46 aton kernel: [ 388.137360] rfkill: input handler enabled Apr 17 19:02:46 aton kernel: [ 388.418242] rfkill: input handler disabled Apr 17 19:02:46 aton NetworkManager[1099]: [1523984566.3369] urfkill appeared on the bus It seem that urfkilld crashes and gets restarted by systemd or similar. Nothing happens to the Wifi button state which can be shown via rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no Another oddity is that the urfkill package in all Ubuntu versions is 0.6.0~20150318.103828 but upstream websites have 0.3.0 (https://www.freedesktop.org/wiki/Software/urfkill/) 0.5.0 (https://github.com/lcp/urfkill/releases) only. Seems like almost abandoned software to me. Since this was a distribution upgrade, I purged and reinstalled the package but without effect. Any ideas? ** Affects: urfkill (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1764806 Title: urfkilld segfault wifi function (Dell XPS 13 9350) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/urfkill/+bug/1764806/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1705882] [NEW] Bluetooth connection to device fails from Ubuntu 16.04
Public bug reported: Bluetooth connection to a bluetooth IOIO device fails using a USB bluetooth adapter from a Ubuntu 16.04 system. The same device could be successfully connected using two non-Ubuntu systems: a) The same system hardware setup (dual-boot) running Windows 8 could connect without any problems. Also could run applications using serial-port associated with this connection. b) Android Note 4 device using bluetooth was able to successfully connect and run apps. Therefore, it was concluded that the Ubuntu 16.04 bluetooth service has a problem. Note: The USB bluetooth adapter used: BTA8000 from Cirago on the ubuntu system as well as the IOIO device. The adapters on the device and system have been verified to have different MAC addresses and works well with other devices. Procedure: Using the Bluetooth control in system-tray -> Bluetooth settings -> +, the device was located as IOIO (8A:22). Here, device was clicked upon, changed PIN to 4545 and pressing next resulted in the device being successfully added. However, the system-tray status of the device continues to say Connection is OFF. Attempting to turnon connection results in changing the system-tray blue-tooth icon to Keys- Icon for few seconds and then reverting back to the bluetooth icon. The device remains in disconnected state and cannot be accessed. The btmon trace (log-line 1277) and bluetoothd syslog (log-line 405) logs seem to indicate that the local host is sending a disconnect request after receiving a SDP: Service Search Attribute Response from the device. The src/device.c:connect_profiles() /org/bluez/hci0/dev_00_1B_DC_06_8A_22 (all), client :1.73 must result in connection setup - not disconnect. Log information was collected for the above procedure. systemInfo.txt: Information about the system bluetooth. syslog.blue: syslog with busr/lib/bluetooth/bluetoothd --noplugin=sap -d in /lib/systemd/system/bluetooth.service btmon.log: result of running sudo btmon ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: bluez 5.37-0ubuntu5 [modified: lib/systemd/system/bluetooth.service] ProcVersionSignature: Ubuntu 4.10.0-27.30~16.04.2-generic 4.10.17 Uname: Linux 4.10.0-27-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 CurrentDesktop: Unity Date: Sun Jul 23 01:28:38 2017 InstallationDate: Installed on 2017-06-03 (49 days ago) InstallationMedia: Ubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215.2) InterestingModules: rfcomm bnep btusb bluetooth JournalErrors: Error: command ['journalctl', '-b', '--priority=warning', '--lines=1000'] failed with exit code 1: Hint: You are currently not seeing messages from other users and the system. Users in the 'systemd-journal' group can see all messages. Pass -q to turn off this notice. No journal files were opened due to insufficient permissions. MachineType: Hewlett-Packard HP ENVY dv7 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-27-generic.efi.signed root=UUID=1c1d284c-53a1-46dc-bc01-8555da60ad7e ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/02/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 181C dmi.board.vendor: Hewlett-Packard dmi.board.version: 52.24 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.22:bd11/02/2012:svnHewlett-Packard:pnHPENVYdv7NotebookPC:pvr088A1130592620100:rvnHewlett-Packard:rn181C:rvr52.24:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP ENVY dv7 Notebook PC dmi.product.version: 088A1130592620100 dmi.sys.vendor: Hewlett-Packard hciconfig: hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:DC:06:89:C5 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN RX bytes:242328 acl:898 sco:0 events:316 errors:0 TX bytes:11991 acl:125 sco:0 commands:112 errors:0 syslog: ** Affects: bluez (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial ** Attachment added: "log.tar.gz" https://bugs.launchpad.net/bugs/1705882/+attachment/4919585/+files/log.tar.gz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1705882 Title: Bluetooth connection to device fails from Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1705882/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1667158] Re: Regression: Borders of windows and desktop background are displayed badly after suspend/resume
For me, 381.09 addressed the fat white borders around windows. However, cool-retro-term comes back with a completely white window. I can type "exit" into it to shut it down, & it acts normally after relaunching it. I haven't yet identified other programs unhappy after a resume under 381.09 - in particular, gnome-terminal works fine. https://github.com/Swordfish90/cool-retro-term . -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1667158 Title: Regression: Borders of windows and desktop background are displayed badly after suspend/resume To manage notifications about this bug go to: https://bugs.launchpad.net/linuxmint/+bug/1667158/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1681025] Re: dhclient fails to assign IP address during system boot inspite of valid DHCP Offer when time change is performed by systemd-timesyncd.service
Please find the attached patch service that was used to delay the network initialization so that it is not affected by the time-change by systemd-timesyncd.service. This may not exactly be an acceptable solution but demonstrates how equivalent changes can be performed to arrive at the solution. ** Attachment added: "delayNetwork.service" https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1681025/+attachment/4857992/+files/delayNetwork.service -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1681025 Title: dhclient fails to assign IP address during system boot inspite of valid DHCP Offer when time change is performed by systemd- timesyncd.service To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1681025/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1681025] [NEW] dhclient fails to assign IP address during system boot inspite of valid DHCP Offer when time change is performed by systemd-timesyncd.service
Public bug reported: System Information: Description:Ubuntu 16.04.2 LTS Release:16.04 Package Information: network-manager: Installed: (none) Candidate: 1.2.6-0ubuntu0.16.04.1 Version table: 1.2.6-0ubuntu0.16.04.1 500 500 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages 1.2.2-0ubuntu0.16.04.4 500 500 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages 1.1.93-0ubuntu4 500 500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 Packages Expected Behavior: The system has one ethernet interface ens160 that is expected to be assigned an IPv4 address using DHCP as part of the bootup process so that services that depends on presence of IPv4 address do not fail to initialize during the boot process. Problem Behavior: The ethernet interface ens160 was UP but no IPv4 address was assigned inspite of correct response from the DHCP server, thereby causing the services that depends on presence of IPv4 address to fail during the boot process. Problem Details: The default 16.04.2 LTS server installed in a VMWare virtual machine running on SuperMicro server using ESXi 6 fails to obtain an IP address from a DHCP server during system startup when there is a simultaneous time change as evidenced by "systemd[1]: Time has been changed" entry in syslog. The system successfully obtains the IP address after significant delay (ranging from 2 - 5 minutes) after system startup. Note that the system has open-vmware-tools package and the VMWare tools settings are set to NOT synchronize the guest time, thereby eliminating any scope of interference from virtualization host (The host itself is set to use NTP synchronization and has correct timing). Wireshark was used to sniff the BOOTP messages. When system is rebooted, system sends a DHCP Release to the DHCP server. When system starts, it broadcasts a valid DHCP Discover to network and received a valid DHCP Offer from the network within 4 secs. Note that a "Time has been changed" log appears just before dhclient logs "No DHCPOFFERS received" in syslog. (The time appears to be moved ahead by around 6 mins.) After about 4 minutes, system broadcasts a valid DHCP Discover to which DHCP server responds with DHCP Offer, system responds with DHCP Request and DHCP server responds with DHCP Ack and the system is assigned its IP address. The dhclient logs in syslog concurs with the wireshark trace: Apr 6 18:39:05 etCorgServer dhclient[1071]: DHCPDISCOVER on ens160 to 255.255.255.255 port 67 interval 3 (xid=0x92322e17) Apr 6 18:39:08 etCorgServer dhclient[1071]: DHCPDISCOVER on ens160 to 255.255.255.255 port 67 interval 8 (xid=0x92322e17) Apr 6 18:39:08 etCorgServer dhclient[1071]: DHCPREQUEST of 192.168.1.161 on ens160 to 255.255.255.255 port 67 (xid=0x172e3292) Apr 6 18:39:08 etCorgServer dhclient[1071]: DHCPOFFER of 192.168.1.161 from 192.168.1.1 Apr 6 18:39:09 etCorgServer dhclient[1071]: DHCPACK of 192.168.1.161 from 192.168.1.1 Apr 6 18:39:09 etCorgServer dhclient[1071]: bound to 192.168.1.161 -- renewal in 33171 seconds. An attempt to release and reacquire the IP address after the system is up and running always succeeds immediately with the aforesaid "happy" usecase. Workaround Attempted: Turning off systemd-timesyncd.service always allows dhclient to immediately assign the IP address during the boot process. Turning it on leads to the above problem usecase with very high probability. Based on this observation, an assumption can be made that the time synchronization happens to overlap the DHCP processing performed by dhclient. There is a time-change which causes the DHCP Offer sent by the DHCP server to be ignored and dhclient to snooze for a long time before attempting another DHCP Discover message to the server. Under such circumstances, the services that depend on presence of an IP address fail. Attempted Workaround: Above assumption was further used to create a delayNetwork.service patch one-shot systemd service that causes the networking service to delay networking.service until time-sync.target is reached by the systemd-timesyncd.service. Such patch seems to cause dhclient to always assign IP address during boot process. However, it would be desirable to ensure that dhclient and/or the networking.service take correct steps to protect itself against race conditions that may arise due to time changes affected by the systemd-timesyncd.service. At the very least, possibility of time change during such critical and vulnerable system component initialization must be minimized by isolating the time change to occur during a bootup phase when such components are not being initialized. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager (not installed) ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux 4.4.0-62-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 Date: Fri Apr 7 22:50:11
[Bug 1681025] Re: dhclient fails to assign IP address during system boot inspite of valid DHCP Offer when time change is performed by systemd-timesyncd.service
Please find the attached wireshark trace of the BOOTP messages for problem usecase, whereby the system was rebooted. ** Attachment added: "Wireshark trace of the problem reboot sequence." https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1681025/+attachment/4857990/+files/bootp.pcapng -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1681025 Title: dhclient fails to assign IP address during system boot inspite of valid DHCP Offer when time change is performed by systemd- timesyncd.service To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1681025/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1637688] Re: Terminal and file manager scrolls inverted
I'm seeing the same behavior under 16.04, on a desktop with a mouse (no laptop touchpad). There's no "natural scrolling" option in "system settings | mouse & touchpad", so to get natural scrolling, I put this in my ~/.Xmodmap: pointer = 1 2 3 5 4 6 7 8 9 10 11 12 (note 4 & 5 are reversed). Just to be clear, "natural scrolling" means movement is opposite the window's scrollbar: move mousewheel up, & the window scrollbar should move down. The Xmodmap setting happily affects firefox, chromium, thunderbird, xterm, etc., but not gnome-terminal, files (nautilus), & cool-retro- term. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1637688 Title: Terminal and file manager scrolls inverted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1637688/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1409190] [NEW] nvidia-331-updates 331.113-0ubuntu0.0.4: nvidia-331-updates kernel module failed to build
Public bug reported: Trying to update to newer kernel, received Setting up linux-image-3.19.0-031900rc3-lowlatency (3.19.0-031900rc3.201501060135) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.19.0-031900rc3-lowlatency /boot/vmlinuz-3.19.0-031900rc3-lowlatency run-parts: executing /etc/kernel/postinst.d/dkms 3.19.0-031900rc3-lowlatency /boot/vmlinuz-3.19.0-031900rc3-lowlatency Error! Bad return status for module build on kernel: 3.19.0-031900rc3-lowlatency (i686) Consult /var/lib/dkms/nvidia-331-updates-uvm/331.113/build/make.log for more information. Error! Bad return status for module build on kernel: 3.19.0-031900rc3-lowlatency (i686) Consult /var/lib/dkms/nvidia-331-updates/331.113/build/make.log for more information. That log file: DKMS make.log for nvidia-331-updates-331.113 for kernel 3.19.0-031900rc3-lowlatency (i686) Fri Jan 9 18:43:18 PST 2015 NVIDIA: calling KBUILD... make[1]: Entering directory `/usr/src/linux-headers-3.19.0-031900rc3-lowlatency' test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo 2; \ echo 2 ERROR: Kernel configuration is invalid.; \ echo 2 include/generated/autoconf.h or include/config/auto.conf are missing.;\ echo 2 Run 'make oldconfig make prepare' on kernel src to fix it.; \ echo 2 ; \ /bin/false) mkdir -p /var/lib/dkms/nvidia-331-updates/331.113/build/.tmp_versions ; rm -f /var/lib/dkms/nvidia-331-updates/331.113/build/.tmp_versions/* make -f ./scripts/Makefile.build obj=/var/lib/dkms/nvidia-331-updates/331.113/build cc -Wp,-MD,/var/lib/dkms/nvidia-331-updates/331.113/build/.nv.o.d -nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.8/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -DCC_HAVE_ASM_GOTO -DNV_MODULE_INSTANCE=0 -DNV_BUILD_MODULE_INSTANCES=0 -UDEBUG -U_DEBUG -DNDEBUG -I/var/lib/dkms/nvidia-331-updates/331.113/build -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\331.113\ -Wno-unused-function -Wuninitialized -DNV_UVM_ENABLE -D__linux__ -DNV_DEV_NAME=\nvidia\ -DMODULE -DKBUILD_STR(s)=#s -DKBUILD_BASENAME=KBUILD_STR(nv) -DKBUILD_MODNAME=KBUILD_STR(nvidia) -c -o /var/lib/dkms/nvidia-331-updates/331.113/build/.tmp_nv.o /var/lib/dkms/nvidia-331-updates/331.113/build/nv.c In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from ./include/uapi/linux/posix_types.h:4, from include/uapi/linux/types.h:13, from include/linux/types.h:5, from include/uapi/linux/capability.h:16, from include/linux/capability.h:15, from include/linux/sched.h:15, from include/linux/utsname.h:5, from /var/lib/dkms/nvidia-331-updates/331.113/build/nv-linux.h:44, from /var/lib/dkms/nvidia-331-updates/331.113/build/nv.c:13: include/asm-generic/qrwlock.h: In function ‘queue_write_trylock’: include/asm-generic/qrwlock.h:93:35: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] cnts, cnts | _QW_LOCKED) == cnts); ^ include/linux/compiler.h:159:40: note: in definition of macro ‘likely’ # define likely(x) __builtin_expect(!!(x), 1) ^ ./arch/x86/include/asm/uaccess.h: In function ‘copy_from_user’: ./arch/x86/include/asm/uaccess.h:712:26: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (likely(sz 0 || sz =
[Bug 1366382] [NEW] Touchpad recognized as generic mouse, scroll not working
Public bug reported: Description:Ubuntu 14.04.1 LTS Release:14.04 Package: It is unclear to me which package is responsible. Expected Behavior: For the touchpad and/or ELAN touchscreen to have scroll capability. Actual Touchpad Behavior: When two or three fingers are put on the touchpad and a scrolling motion is made (in the center, or at either side), it causes the mouse to move as if it were being moved normally sometimes, other times the mouse stays still and doesn't move, but no scrolling is accomplished and the cursor doesn't change to a scrolling cursor. Actual Touchscreen Behavior: The touch screen shows the same behavior, except there is no case when the mouse stays still, it will always move as if being moved normally. In addition, the touchscreen's precision is markedly rough compared to my experience using this same touchscreen on Windows 8.1 (which has since been wiped from this machine, with pleasure). Touchpad Capabilities: Normal mouse movement, right-click using touchpad button, left-click using touchpad button, tap-to-click using touchpad, dragging the mouse while something is selected (either with the buttons or tap-to-click). Touchscreen Capabilities: Normal mouse movement, single-tap to select, dragging things after selecting them. xinput list gives me: ⎡ Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ ELAN Touchscreen id=9[slave pointer (2)] ⎜ ↳ PS/2 Generic Mouseid=12 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Button id=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Power Button id=8[slave keyboard (3)] ↳ HP Truevision HD id=10 [slave keyboard (3)] ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ↳ HP WMI hotkeysid=13 [slave keyboard (3)] ↳ HP Wireless hotkeys id=14 [slave keyboard (3)] I searched the forums and tried all permutations of making sure synaptics is installed, tweaking settings for the mouse, and disabling 'psmouse', but nothing works. If any outputs or tests need to be done on my end to give you more information, please just let me know. I'm happy to help so this bug can be fixed! ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-35-generic 3.13.0-35.62 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic i686 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: one1962 F pulseaudio /dev/snd/controlC1: one1962 F pulseaudio CurrentDesktop: XFCE Date: Sat Sep 6 14:02:01 2014 HibernationDevice: RESUME=UUID=f95ef58b-eb3c-40a9-a650-b82557d76997 InstallationDate: Installed on 2014-09-06 (0 days ago) InstallationMedia: Xubuntu 14.04.1 LTS Trusty Tahr - Release i386 (20140723) MachineType: Hewlett-Packard HP Pavilion 14 Notebook PC ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=2a992305-71e3-4ca2-beff-ff1b0e60bdc5 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-35-generic N/A linux-backports-modules-3.13.0-35-generic N/A linux-firmware 1.127.5 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/11/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.06 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 227D dmi.board.vendor: Hewlett-Packard dmi.board.version: 77.13 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.06:bd06/11/2014:svnHewlett-Packard:pnHPPavilion14NotebookPC:pvr097510405F1620180:rvnHewlett-Packard:rn227D:rvr77.13:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion 14 Notebook PC dmi.product.version: 097510405F1620180 dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: apport-bug i386 trusty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1366382 Title: Touchpad recognized as generic mouse, scroll not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1366382/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com
[Bug 1366382] Re: Touchpad recognized as generic mouse, scroll not working
Sure. The listing on the package says: HD Pavilion 14 Notebook PC 14-v062us. Then it lists the product number as: G6S68UA#ABA. I hope this helps! If you need any other info, just let me know! :) J.D. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1366382 Title: Touchpad recognized as generic mouse, scroll not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1366382/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1366382] Re: [HP Pavilion 14-v062us Notebook PC] Touchpad recognized as generic mouse, scroll not working
Sorry, I missed that second link you posted. I'll see what I can do and get back to you with any results! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1366382 Title: [HP Pavilion 14-v062us Notebook PC] Touchpad recognized as generic mouse, scroll not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1366382/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1366382] Re: [HP Pavilion 14-v062us Notebook PC] Touchpad recognized as generic mouse, scroll not working
Hi, I'm sorry, but I can't do that for you because I installed Linux on the entire hard drive. I don't have a backup copy of Windows 8.1 (because it was awful and I didn't want to keep it), and I don't have installation disks for any other versions of Windows that are compatible with the BIOS software update. If I had known this before, I would have updated before wiping the drive. What I can tell you is that the scroll function worked in Windows 8.1 -- so I know it had the capacity to work. I'm sorry I can't help you more with that. If I'm mistaken and there is some way to update it without Windows, please let me know. I'd be happy to try! J.D. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1366382 Title: [HP Pavilion 14-v062us Notebook PC] Touchpad recognized as generic mouse, scroll not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1366382/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1075251] Re: package mysql-server-5.5 5.5.28-0ubuntu0.12.04.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
I was able to fix this... Steps 1) I ran 'sudo mysqld' and noticed the error: [Note] Server hostname (bind-address): '10.0.1.13'; port: 3306 [Note] - '10.0.1.13' resolves to '10.0.1.13'; [Note] Server socket created on IP: '10.0.1.13'. [ERROR] Can't start server: Bind on TCP/IP port: Cannot assign requested address I realized that I had the 'bind-address' directive set to: 'bind-address = 10.0.1.13' and remembered that my IP address changed on my server, so once I commented that out or changed it to 'bind-address = 192.168.11.45', I was able to re-run 'upgrade' on apt again and this time 'Setting up mysql-server-5.5 (5.5.28-0ubuntu0.12.04.2) ...' passed and didn't fail. So this might work for you... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1075251 Title: package mysql-server-5.5 5.5.28-0ubuntu0.12.04.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mysql-5.5/+bug/1075251/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 617764] Re: eth0 disconnected after boot even though auto eth0 -- r8169
I currently have no computer installed using Precise. Sorry. If I stumble across this issue again, I will report here... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/617764 Title: eth0 disconnected after boot even though auto eth0 -- r8169 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/617764/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 971710] [NEW] update-rc.d: warning: apcupsd runlevel arguments do not match LSB Default values
Public bug reported: Description:Ubuntu precise (development branch) Release:12.04 apcupsd: Installed: 3.14.10-1 Candidate: 3.14.10-1 Version table: *** 3.14.10-1 0 500 http://us.archive.ubuntu.com/ubuntu/ precise/universe amd64 Packages 100 /var/lib/dpkg/status When installing apcupsd (above version), I receive the following warning: Setting up apcupsd (3.14.10-1) ... update-rc.d: warning: apcupsd start runlevel arguments (1 2 3 4 5) do not match LSB Default-Start values (2 3 4 5) update-rc.d: warning: apcupsd stop runlevel arguments (0 6) do not match LSB Default-Stop values (0 1 6) Other than that, the package seems to work fine. ** Affects: apcupsd (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/971710 Title: update-rc.d: warning: apcupsd runlevel arguments do not match LSB Default values To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apcupsd/+bug/971710/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305934] Re: padlock-sha.ko fails to load since 2.6.28-2-generic
I just want to add that I also experienced this with a recent backports kernel on Debian Lenny (). It seems like the padlock-sha modules loads the kernel generic sha module as fallback. I had the following aliases set: alias aes padlock_aes alias sha1 padlock_sha Removing the sha1-padlock_sha alias made the module load fine at boot time and /proc/crypto looks nice without failing selftests. This seems to be a change from earlier kernel versions, where this alias was recommended to be set by some tutorials. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/305934 Title: padlock-sha.ko fails to load since 2.6.28-2-generic -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305934] Re: padlock-sha.ko fails to load since 2.6.28-2-generic
kernel version = 2.6.32-bpo.5-686 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/305934 Title: padlock-sha.ko fails to load since 2.6.28-2-generic -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 617764] [NEW] Network disconnected after bootup
Public bug reported: Binary package hint: network-manager Thing I noticed on my two computers running Lucid: Sometimes the network (cable) does not start automatically. I have to manually do enable network on the nm-applet. I put = auto eth0 iface eth0 inet dhcp = into /etc/network/interfaces but it still happens. This can be a serious problem if the computer runs as a server or head-less. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: network-manager 0.8-0ubuntu3 Uname: Linux 2.6.34-020634-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 CRDA: Error: [Errno 2] No such file or directory Date: Sat Aug 14 11:24:05 2010 EcryptfsInUse: Yes IfupdownConfig: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) IpRoute: 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.13 169.254.0.0/16 dev eth0 scope link metric 1000 default via 192.168.178.1 dev eth0 metric 100 IwConfig: lono wireless extensions. eth0 no wireless extensions. vboxnet0 no wireless extensions. Keyfiles: Error: [Errno 2] No such file or directory ProcEnviron: PATH=(custom, user) LANG=de_DE.UTF-8 SHELL=/bin/bash RfKill: SourcePackage: network-manager WifiSyslog: ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid -- Network disconnected after bootup https://bugs.launchpad.net/bugs/617764 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 617764] Re: Network disconnected after bootup
** Attachment added: Dependencies.txt https://bugs.launchpad.net/bugs/617764/+attachment/1489542/+files/Dependencies.txt ** Attachment added: Gconf.txt https://bugs.launchpad.net/bugs/617764/+attachment/1489543/+files/Gconf.txt ** Attachment added: IpAddr.txt https://bugs.launchpad.net/bugs/617764/+attachment/1489544/+files/IpAddr.txt ** Attachment added: NetDevice.eth0.txt https://bugs.launchpad.net/bugs/617764/+attachment/1489545/+files/NetDevice.eth0.txt ** Attachment added: NetDevice.lo.txt https://bugs.launchpad.net/bugs/617764/+attachment/1489546/+files/NetDevice.lo.txt ** Attachment added: NetDevice.vboxnet0.txt https://bugs.launchpad.net/bugs/617764/+attachment/1489547/+files/NetDevice.vboxnet0.txt ** Attachment added: PciNetwork.txt https://bugs.launchpad.net/bugs/617764/+attachment/1489548/+files/PciNetwork.txt ** Attachment added: nm-system-settings.conf.txt https://bugs.launchpad.net/bugs/617764/+attachment/1489549/+files/nm-system-settings.conf.txt -- Network disconnected after bootup https://bugs.launchpad.net/bugs/617764 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 348343] Re: [Jaunty] Volume keys causing an endless loop with pulseaudio
This is just a hint but it could solve many of the related bugs here, it only applies to keyboards normally known to work correctly with hotkeys: I had the same problems here under Karmic (after some system changes) and it came back under Lucid after I thought it was corrected by the upgrade. Strange thing is: this happend with the multimedia special keys only but with a normal Cherry XPress usb keyboard (which always happend to work nicely before. Using showkey on the console showed that none of these keys were released and concordingly the volume control and other hotkey functions were repeated forever. It gave me some headaches until I decided to unplug and reconnect the keyboard to another usb port where it worked nicely again. I guess since notebook keyboards are connected via USB and FN special keys work like mine this could be the reason for many of these bugs. So if a physical disconnect is possible, try it and start the computer again with usb disconnected. Then reattach the keyboard and see what happens. Maybe unloading the usb hid modules has the same effect but for me the error persisted over several reboots. -- [Jaunty] Volume keys causing an endless loop with pulseaudio https://bugs.launchpad.net/bugs/348343 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 42720] Re: Copying files to webdav broken (first completely copied to RAM and then transfered)
I don't know whether this is the same, but copying large files (~2 GB) make the progress bar to advance way to fast until 1 GB and then stop there forever. If you try to unmount the virtual file system, it gives you a DBUS error message: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. To use the FS again, you have to reboot (at least this is the only way I know of). I counterchecked with cadaver which uploads these files without problems. -- Copying files to webdav broken (first completely copied to RAM and then transfered) https://bugs.launchpad.net/bugs/42720 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 507418] [NEW] xsane crashes Epson Artisan 810
Public bug reported: Binary package hint: xsane The scanner app made my all-in-one printer/scanner lock up and not scan. I have an Epson Artisan 810. ProblemType: Bug Architecture: amd64 Date: Thu Jan 14 05:55:23 2010 DistroRelease: Ubuntu 9.10 InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027) Package: xsane 0.996-2ubuntu1.1 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-14.48-generic SourcePackage: xsane Uname: Linux 2.6.31-14-generic x86_64 ** Affects: xsane (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug -- xsane crashes Epson Artisan 810 https://bugs.launchpad.net/bugs/507418 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 507418] Re: xsane crashes Epson Artisan 810
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/37879789/Dependencies.txt ** Attachment added: XsessionErrors.txt http://launchpadlibrarian.net/37879790/XsessionErrors.txt -- xsane crashes Epson Artisan 810 https://bugs.launchpad.net/bugs/507418 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 400687] Re: suspend resume works but leads to disk i/o errors
I get the same error on standard suspend to RAM (S3) over kernel when resuming once in a while. The error messages can thus not be written to disk any more. This is on Karmic AMD64 using a Western Digital WD-WMAVU02433xx hard disk. ** Attachment added: pm-suspend.log http://launchpadlibrarian.net/35569648/pm-suspend.log -- suspend resume works but leads to disk i/o errors https://bugs.launchpad.net/bugs/400687 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 480417] [NEW] package needs additional dependency
Public bug reported: Binary package hint: sixpack The package needs python MLab module for running which is in the (meta)package python-numeric-ext while the package seems to depend only on python-numeric. Description: Ubuntu 9.10 Release: 9.10 sixpack: 1:0.64-2ubuntu1 ProblemType: Bug Architecture: amd64 Date: Wed Nov 11 01:33:58 2009 DistroRelease: Ubuntu 9.10 InstallationMedia: Ubuntu 9.10 Karmic Koala - Release Candidate amd64 (20091020.3) NonfreeKernelModules: nvidia Package: sixpack 1:0.64-2ubuntu1 PackageArchitecture: all ProcEnviron: LANGUAGE=de_DE.UTF-8 PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-14.48-generic SourcePackage: sixpack Uname: Linux 2.6.31-14-generic x86_64 ** Affects: sixpack (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug -- package needs additional dependency https://bugs.launchpad.net/bugs/480417 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 480417] Re: package needs additional dependency
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/35506444/Dependencies.txt ** Attachment added: XsessionErrors.txt http://launchpadlibrarian.net/35506445/XsessionErrors.txt -- package needs additional dependency https://bugs.launchpad.net/bugs/480417 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 156403] Re: cmake seg faults
Yes, it still seems to be a problem. I created a CMakeLists.txt file with the same code I originally posted in my first bug report (included in this email as well). Here was the output: yamok...@borelli:~/cmaketest$ cmake . -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- == DIRECTORIES == Segmentation fault yamok...@borelli:~/cmaketest$ cmake --version cmake version 2.6-patch 2 I am running on the latest Ubuntu Desktop (9.04, 32-bit) with all the most recent patches applied. My cmake version is listed above. J.D. On Tue, May 26, 2009 at 7:52 PM, Jonathan Thomas echidna...@kubuntu.org wrote: Hi, We were wondering if this was still an issue with a more recent version of Ubuntu. Ubuntu 7.10 the Gutsy Gibbon has reached the end of its supported life, so no more fixes will be provided for it. Thanks in advance. ** Changed in: cmake (Ubuntu) Status: Confirmed = Incomplete -- cmake seg faults https://bugs.launchpad.net/bugs/156403 You received this bug notification because you are a direct subscriber of the bug. ** Attachment added: CMakeLists.txt http://launchpadlibrarian.net/27203536/CMakeLists.txt -- cmake seg faults https://bugs.launchpad.net/bugs/156403 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 373306] [NEW] gnome-power-manager freezes desktop when ACPI_PROCESSOR kernel option disabled
Public bug reported: Binary package hint: gnome-power-manager While running a xenomai/adeos patched kernel (2.6.28.7), the desktop freezes when left unattended after a few minutes. Someone on the xenomai mailing list found that if gnome-power-manager is uninstalled the desktop freezing problem is resolved. The xenomai/adeos kernel patch requires that kernel config option 'ACPI_PROCESSOR' is disabled. So from the workaround discovered by the xenomai community and the above requirement it seems gnome-power-manager has a problem if this kernel option is disabled. Unfortunately the proposed workaround by the xenomai community may not be desirable for ubuntu users. In Ubuntu 9.04, uninstalling gnome-power- manager also requires uninstalling 'ubuntu-desktop'. ProblemType: Bug ACAdapter: Not Present Architecture: i386 Battery: Not Present CPUScaling: Not Present DistroRelease: Ubuntu 9.04 LaptopPanel: Not Present MachineType: Dell Inc. OptiPlex GX620 Package: gnome-power-manager 2.24.2-2ubuntu8 ProcCmdLine: root=UUID=311a037c-0894-48ca-8582-c2a4d2b62cb1 ro quiet splash ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.28-11.42-generic SourcePackage: gnome-power-manager ** Affects: gnome-power-manager (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- gnome-power-manager freezes desktop when ACPI_PROCESSOR kernel option disabled https://bugs.launchpad.net/bugs/373306 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 373306] Re: gnome-power-manager freezes desktop when ACPI_PROCESSOR kernel option disabled
** Attachment added: BootDmesg.txt http://launchpadlibrarian.net/26435910/BootDmesg.txt ** Attachment added: CurrentDmesg.txt http://launchpadlibrarian.net/26435911/CurrentDmesg.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/26435912/Dependencies.txt ** Attachment added: GConfNonDefault.txt http://launchpadlibrarian.net/26435913/GConfNonDefault.txt ** Attachment added: HalComputerInfo.txt http://launchpadlibrarian.net/26435914/HalComputerInfo.txt ** Attachment added: Lspci.txt http://launchpadlibrarian.net/26435915/Lspci.txt ** Attachment added: Lsusb.txt http://launchpadlibrarian.net/26435916/Lsusb.txt ** Attachment added: ProcCpuinfo.txt http://launchpadlibrarian.net/26435917/ProcCpuinfo.txt ** Attachment added: ProcInterrupts.txt http://launchpadlibrarian.net/26435918/ProcInterrupts.txt ** Attachment added: ProcModules.txt http://launchpadlibrarian.net/26435919/ProcModules.txt -- gnome-power-manager freezes desktop when ACPI_PROCESSOR kernel option disabled https://bugs.launchpad.net/bugs/373306 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 361706] [NEW] vanilla kernel compiling fails intermittently
Public bug reported: Whatever is causing this problem, its not easily reproducible. Here's what happened. I was trying to compile a vanilla kernel (2.6.28.7) downloaded from kernel.org. During the build process I got the following compile error: CC [M] fs/coda/cache.o In file included from /usr/src/linux-build-2.6.28.7-rtai-3.7/arch/x86/include/asm/page.h:132, from /usr/src/linux-build-2.6.28.7-rtai-3.7/arch/x86/include/asm/thread_info.h:11, from include/linux/thread_info.h:55, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:8, from fs/coda/cache.c:12: include/asm-generic/pgtable-nopmd.h:21:2: error: invalid preprocessing directive #d include/asm-generic/pgtable-nopmd.h:21:3: warning: missing terminating ' character In file included from /usr/src/linux-build-2.6.28.7-rtai-3.7/arch/x86/include/asm/page.h:132, from /usr/src/linux-build-2.6.28.7-rtai-3.7/arch/x86/include/asm/thread_info.h:11, from include/linux/thread_info.h:55, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:8, from fs/coda/cache.c:12: include/asm-generic/pgtable-nopmd.h:43: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘inline’ In file included from include/linux/coda_linux.h:17, from fs/coda/cache.c:22: include/linux/mm.h: In function ‘is_vmalloc_addr’: include/linux/mm.h:276: error: ‘PMD_SIZE’ undeclared (first use in this function) include/linux/mm.h:276: error: (Each undeclared identifier is reported only once include/linux/mm.h:276: error: for each function it appears in.) In file included from include/linux/coda_linux.h:17, from fs/coda/cache.c:22: include/linux/mm.h: In function ‘pmd_alloc’: include/linux/mm.h:919: error: implicit declaration of function ‘pmd_offset’ include/linux/mm.h:919: warning: pointer/integer type mismatch in conditional expression make[3]: *** [fs/coda/cache.o] Error 1 The important line is: include/asm-generic/pgtable-nopmd.h:21:2: error: invalid preprocessing directive #d When I opened 'pgtable-nopmd.h', line 21 is '#define PMD_SIZE (1UL PMD_SHIFT)'. Obviously there is something wrong with the c-preprocessor/gcc or some other tool in the chain. When I restarted the build process, 'pgtable-nopmd.h' included just fine and the kernel compile when on fine. I have seen this bug once before. It was a different file, but the exact same behavior. And again, once I restarted build process, the compiling resumed with no problems. I am not sure that this is the cause of the problem but for completeness, I have changed the /bin/sh symbolic link to point to '/bin/bash' instead of '/bin/dash'. Here are the rest of my system stats: Description:Ubuntu 8.10 Release:8.10 2.6.27-11-generic #1 SMP Wed Apr 1 20:57:48 UTC 2009 i686 GNU/Linux gcc: Installed: 4:4.3.1-1ubuntu2 Candidate: 4:4.3.1-1ubuntu2 Version table: *** 4:4.3.1-1ubuntu2 0 500 http://us.archive.ubuntu.com intrepid/main Packages 100 /var/lib/dpkg/status bash: Installed: 3.2-4ubuntu1 Candidate: 3.2-4ubuntu1 Version table: *** 3.2-4ubuntu1 0 500 http://us.archive.ubuntu.com intrepid/main Packages 100 /var/lib/dpkg/status ** Affects: ubuntu Importance: Undecided Status: New -- vanilla kernel compiling fails intermittently https://bugs.launchpad.net/bugs/361706 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 104512] Re: [Package Request] sun-java6-plugin on AMD64?
Sorry to be impatient on this but where are we at on this? Waiting for Sun? This is a HUGE problem for me... this isn't I can't play my party poker or check my bills online. This makes my Ubuntu box completely worthless. I am at a facility that uses a Cisco Java applet to authenticate users on the network... no java plugin for my browser, no Cisco applet, no login to web - dead box. In an era where the Internet is so important, I think its gateways (browsers) and their associated functionality should demand the highest priority from distro authorities. So much so that I would even vote to take amd64 support out of Ubuntu *until* things like this are fixed. At the very least take the amd64 download off the main downloads page. Granted.. I know I am probably a very small minority of the users but as it stands, i have no use for my box right now. Will have to fall back to 32 bit version until this is fixed. -- [Package Request] sun-java6-plugin on AMD64? https://bugs.launchpad.net/bugs/104512 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 158159] libcgal-dev requires updated dependencies
Public bug reported: Binary package hint: libcgal-dev As stated in the CGAL Installation documentation, (http://www.cgal.org/Manual/3.3/doc_html/installation_manual/Chapter_installation_manual.html#Section_2), Having GMP version 4.1.4 or later and MPFR version 2.0.1 or later installed is highly recommended. These libraries can be obtained from http://gmplib.org/ and http://www.mpfr.org/, respectively, if they should not be present on your system. Note that MPFR used to be included with GMP up to GMP version 4.1.X, but it is not included anymore starting from GMP 4.2. Within CGAL, support for GMP requires also MPFR and vice versa. I believe the dependence on GMP 4.1.1 is more than just highly recommended. I recently got the following compile errors while building one of the examples from the CGAL manual.. The errors are all related to stuff missing in GMP releated files. I can include the code I used to generate the errors but it comes directly (unedited) from section 45.3.5 of their manual (the user-defined distance and point class). Although, I am sure other examples would produce similar errors. /usr/include/CGAL/gmpxx_coercion_traits.h:44: error: ‘::__gmp_expr’ has not been declared /usr/include/CGAL/gmpxx_coercion_traits.h:44: error: ‘::__gmp_expr’ has not been declared /usr/include/CGAL/gmpxx_coercion_traits.h:44: error: template argument 1 is invalid ... [Lines omitted] ... /usr/include/CGAL/gmpxx_coercion_traits.h:106: error: wrong number of template arguments (3, should be 2) /usr/include/CGAL/Coercion_traits.h:155: error: provided for ‘templateclass A, class B struct CGAL::Coercion_traits’ /usr/include/CGAL/gmpxx_coercion_traits.h:106: error: expected unqualified-id before ‘’ token /usr/include/CGAL/mpz_class.h:50: error: ‘mpz_class’ was not declared in this scope /usr/include/CGAL/mpz_class.h:50: error: template argument 1 is invalid ... [Lines omitted] ... /usr/include/CGAL/mpq_class.h:49: error: ‘mpq_class’ was not declared in this scope /usr/include/CGAL/mpq_class.h:49: error: template argument 1 is invalid ... [Lines omitted] ... /usr/include/CGAL/Algebraic_structure_traits.h:66: error: provided for ‘templateclass Type_ class CGAL::Algebraic_structure_traits’ /usr/include/CGAL/gmpxx.h:54: error: expected unqualified-id before ‘’ token /usr/include/CGAL/gmpxx.h:58: error: ‘::__gmp_expr’ has not been declared /usr/include/CGAL/gmpxx.h:58: error: ‘::__gmp_expr’ has not been declared /usr/include/CGAL/gmpxx.h:58: error: template argument 1 is invalid /usr/include/CGAL/gmpxx.h:58: error: expected unqualified-id before ‘’ token ** Affects: cgal (Ubuntu) Importance: Undecided Status: New -- libcgal-dev requires updated dependencies https://bugs.launchpad.net/bugs/158159 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 158159] Re: libcgal-dev requires updated dependencies
Here is the source code which produced the problem. ** Attachment added: CGAL test program http://launchpadlibrarian.net/10199510/CGAL_test.tar.gz -- libcgal-dev requires updated dependencies https://bugs.launchpad.net/bugs/158159 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 156403] Re: cmake seg faults
Setting status back to new as instructed. -- cmake seg faults https://bugs.launchpad.net/bugs/156403 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 156403] cmake seg faults
Public bug reported: Binary package hint: cmake Steps to reproduce: CMake seg faults when trying to access a non-existent environmental variable. The following code worked perfectly fine in the previous version of CMake (whatever version was considered stable under Feisty): MESSAGE( STATUS == DIRECTORIES == ) SET( PROJECT_INSTALL_DIR $ENV{${PROJECT_INSTALL_ENV_VAR}} ) # SEG FAULTS HERE! # If environment variable ORCA2_INSTALL is NOT set, use defaults IF( NOT PROJECT_INSTALL_DIR ) # ENDIF( NOT PROJECT_INSTALL_DIR ) CMake version: 2.4-patch 7 Ubuntu version: Gutsy Gibbon - 7.10 ** Affects: cmake (Ubuntu) Importance: Undecided Status: New -- cmake seg faults https://bugs.launchpad.net/bugs/156403 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 156403] Re: cmake seg faults
First I was a little shocked at how quickly this bug was closed. I already provided the CMake code that produced the seg fault... look, I know with a new release, everyone is probably flooded with new bugs. But simply closing this one right off I think was a little premature. At any rate, as you have asked, here is a CMakeLists.txt file which produces the seg fault. I have even confirmed that the error was not present in Feisty (also previously noted in the original report of this bug). See the terminal output below: ** USING FEISTY VERSION OF CMAKE ** [EMAIL PROTECTED]:~/code/mysrc$ cmake -version cmake version 2.4-patch 6 [EMAIL PROTECTED]:~/code/mysrc$ cmake . -- What more do you need.. -- In CMake version 2.4.6, the following line of code: -- SET( PROJECT_INSTALL_DIR=$ENV{${PROJECT_INSTALL_ENV_VAR}} ) -- Runs fine... -- Configuring done -- Generating done -- Build files have been written to: /home/yamokosk/code/mysrc ** AFTER UPDATING TO GUSTY CMAKE VERISON ** [EMAIL PROTECTED]:~/code/mysrc$ cmake -version cmake version 2.4-patch 7 [EMAIL PROTECTED]:~/code/mysrc$ cmake . -- What more do you need.. -- In CMake version 2.4.7, the following line of code: -- SET( PROJECT_INSTALL_DIR=$ENV{${PROJECT_INSTALL_ENV_VAR}} ) Segmentation fault (core dumped) ** Attachment added: CMakeLists.txt file http://launchpadlibrarian.net/10142212/CMakeLists.txt ** Changed in: cmake (Ubuntu) Status: Incomplete = New -- cmake seg faults https://bugs.launchpad.net/bugs/156403 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 53789] Re: Unable to open /etc/opt/IDEALX/smbldap-tools/smbldap.conf for reading
Thank you, you're absolutely right. J.D. Zach wrote: You probably need to run the configure script, configure.pl, that comes with the package. One of the first thing it does is establish a place to put smbldap.conf. Might be nice if this or something similar were handled by dpkg. -- Unable to open /etc/opt/IDEALX/smbldap-tools/smbldap.conf for reading https://launchpad.net/bugs/53789 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs