Sorry, I don't use Ubuntu anymore.
~
Jim (James D.) Ehmann
Cary, NC 27511
http://about.me/james.ehmann
On Thu, Aug 9, 2018 at 1:45 AM gf <775...@bugs.launchpad.net> wrote:
> Hello James,
> Thank you for submitting this bug and reporting a problem with cups and
> printing. Yo
Haha, ok ok. Recreated it in 16.04 by applying pressure to the trackpad
with my palm. It seems better now on both versions but I do suspect a
hw issue. Dell is coming out to replace it under warranty. Hoping it's
not a design flaw that impacts all touchpads ,, or maybe they have a
newer
Solid hour so far , zero problems. Usually the problem would have
already happened on 17.10. I believe there is a bug, that's not to say
some people don't have a hardware issue, it doesn't seem to apply in my
case. I'm rolling my install on this notebook back to 16.04 lts and I
will report back
I'm not convinced it's hardware related, booted with 16.04.3 , going to
use it until tonight.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1651635
Title:
XPS 13 9360 trackpad locks into scroll
I'm sending it back to dell then...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1651635
Title:
XPS 13 9360 trackpad locks into scroll mode
To manage notifications about this bug go to:
I downgraded the BIOS and it seems to have helped but still get
glitches. Drives me mad.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1651635
Title:
XPS 13 9360 trackpad locks into scroll mode
To
Tried to downgrade the firmware, still issues but they seem different. I
still don't know what broke it...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1651635
Title:
XPS 13 9360 trackpad locks
Still experiencing some glitches. I'll shutup for awhile until i
actually figure something out. It does seem better since ive been
messing with it. I may just try a downgrade to ubuntu 16 and see what
happens.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
Spoke too soon. Happened again, downgraded BIOS to 2.2.1 , works fine
now. I can tell this is the correct fix because on initial ubuntu login
the mouse would hang for a few seconds before even becoming usable. Now
it doesn't do that at all and no other glitches seem to be happening.
--
You
..and just when I was about to downgrade the bios, it seems to be
working. I cleaned some crud out from the sides of the trackpad. Could
have been it. Maybe driver config can be changed to ignore the edges of
the trackpad to avoid this? If anything changes I will update.
--
You received this
Also, why would ubuntu push out a firmware update for a notebook that
breaks it? They just added it without testing it?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1651635
Title:
XPS 13 9360
I JUST started getting this bug with a firmware update pushed to me by
Ubuntu 17.10. Never had this problem until now. So annoying. I'm on the
Dell 9360 too.
** Attachment added: "dmesg.output.gz"
https://bugs.launchpad.net/dell-sputnik/+bug/1651635/+attachment/5008366/+files/dmesg.output.gz
The error I get is:
"The file 'file.ovpn' could not be read or does not contain recognized
VPN connection information
Error: Key file contains line 'dev tun' which is not a key-value pair,
group, or comment."
If I edit the file and remove the line "comp-lzo adaptive" from the end
of the file
This did not actually fix the problem . The only way I was able to fix
this was to run the install via dpkg and use --force-overwrite.
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
I am on Ubuntu 12.10 and I was simply doing a software update that
includes the linux-image-3.5.0-51-generic
And it fails with this error info:
Unpacking replacement linux-image-3.5.0-51-generic ...
dpkg: error processing
This problem still persists in latest 14.04 .. how this hasn't been
fixed yet I don't know. It makes using the touchpad painful. The patch
above still works and helps but once you try to say, edit images in
gimp, and have the cursor fly across the screen at random times, you
realize its still
believe it or not, Two finger scrolling is ok for me, maybe its because
of how I do it... when click and dragging after the patch, it bounces
around the screen though, after dragging for a few seconds to 10-15,
depends. The patch overall does help a lot tho.
FWIW. On my synaptics pad I set
This bug is annoying enough that I'm putting a new Dell XPS 14 on the
shelf until its fixed, possibly even returning the thing if it gets
close to the 30 day return limit. I'll stick with my clunky HP
notebook with a working two button touchpad until it gets sorted out.
I can try compiling from
http://pastebin.com/raw.php?i=4v9JP2pe
I applied the patch there , built the new package and installed. I was
thrilled at first, it worked... except it introduces another problem,
now when scrolling for a little while with the button held down the
cursor jumps around the screen. Its like
It's a DV6-7220us
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Title:
Resume fails on HP Envy DV6 notebook (AMD APU)
Right, one revision higher... and 13.04 worked FINE... so chances are
this will lead to nothing. I may or may not spend the time to flash
since I need to load windows to do it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I do see it could be slightly easier than that .. will look
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Title:
[HP ENVY dv6-7220us Notebook PC] Resume fails
To manage notifications about
Turns out the .exe from HP has no .iso file in it, so the instructions
listed in the link you sent don't appear to be valid. So I would indeed
need to boot a recent copy of windows, easier said than done. I will
probably need to install a different hard disk and install the OS to it.
a pain in
yeah i'm not going to bother with it... i installed the latest amd/ati
proprietary video drivers.. which handle suspend/resume fine. The issue
I now have with those is brightness no longer works .. xrandr --output
LVDS --brightness 0.3 works but messes with colors. there seems to be
more
Public bug reported:
Erred While Updating
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: ubuntu-release-upgrader-core 1:0.192.13
ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
Uname: Linux 3.8.0-26-generic x86_64
ApportVersion: 2.9.2-0ubuntu8.3
Architecture: amd64
CrashDB:
RELATED: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1239765
-- my screen stays completely blank though as if it has no power, same
as the people in posts 2 and 3...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to the bug report.
just realized this bug is old... probably not related after all
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/28959
Title:
screen stays blank after resume from suspend
To manage
No it worked fine on 13.04 .. this began when I upgraded to 13.10. I
will try to get time to test the mainline kernel, I do use this machine
during the week though so might not be able to until the weekend.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Just tested with the mainline kernel you linked, same behavior...
screen never turns back on, like before I can enter my password and hear
the toggle sounds when changing volume, wifi led lights up, so it
appears all is well besides the screen not coming back on.
** Changed in: linux (Ubuntu)
Public bug reported:
Latest Ubuntu 13.10 - Suspend works when closing screen, upon resume
everything seems to resume except the display which remains blank.
Adjusting brightness does nothing and needs a hard reboot. This does
NOT happen when using latest catalyst proprietary drivers (however
apport information
** Attachment added: IwConfig.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877852/+files/IwConfig.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Title:
apport information
** Attachment added: CurrentDmesg.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877851/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
apport information
** Attachment added: BootDmesg.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877849/+files/BootDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
apport information
** Attachment added: WifiSyslog.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877860/+files/WifiSyslog.txt
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
apport information
** Tags added: apport-collected saucy
** Description changed:
Latest Ubuntu 13.10 - Suspend works when closing screen, upon resume
everything seems to resume except the display which remains blank.
Adjusting brightness does nothing and needs a hard reboot. This does
apport information
** Attachment added: UdevLog.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877859/+files/UdevLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Title:
apport information
** Attachment added: CRDA.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877850/+files/CRDA.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Title:
Resume
apport information
** Attachment added: Lsusb.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877854/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Title:
apport information
** Attachment added: ProcModules.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877857/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
apport information
** Attachment added: Lspci.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877853/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Title:
apport information
** Attachment added: UdevDb.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877858/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Title:
apport information
** Attachment added: ProcInterrupts.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877856/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: ProcCpuinfo.txt
https://bugs.launchpad.net/bugs/1239765/+attachment/3877855/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239765
Is there an update on this or a workaround? My computer is hosed on
12.10 right now with this Compiz crash. Thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1037338
Title:
compiz crashed with
Nope... same problem.. its worse with a usb mouse plugged in, but the
lockups can happen at boot with nothing plugged in... this could be a
different bug than the OP
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Just applied kernel 3.8.0-19-generic today to ubuntu 13.04 and so far so
good. I havent done a ton of reboots to thoroughly test but previously
it only took a couple tries. I will be right back to report if it
happens again.
--
You received this bug notification because you are a member of
I have this same problem with raring 13.04 latest kernel and all
updates, AMD 13.4 proprietary video drivers.
When my logitech USB wireless mouse is plugged into the regular USB 2
port on my HP DV6 envy notebook ubuntu hangs at boot with a black screen
and the cpu fan goes faster, assuming theres
Hi to whom it may concern,
At the top of this posting, it states that this bug affects 40 people
but judging by the number of google references and comments on the
Ubuntu Forums, it affects a great deal than 40. I am referring to the
bug where one seems to be unable, to set up a printer attached
Hi to whom it may concern,
At the top of this posting, it states that this bug affects 40 people
but judging by the number of google references and comments on the
Ubuntu Forums, it affects a great deal than 40. I am referring to the
bug where one seems to be unable, to set up a printer attached
I think ViktigLemma hit on this, but I installed xscreensaver, and told
my Ubuntu 11.10 to never suspend. Now the computer responds the way I
expect. It's just on me to turn off my monitor when I'm done for the
day..not a big deal. Well worth it to have my computer function
correctly 100% of
Public bug reported:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Choose printer):
{'cups_dest': cups.Dest Lexmark-7000 (default),
'cups_instance': None,
'cups_queue': 'Lexmark-7000',
'cups_queue_listed': True}
Page 3 (Check printer sanity):
This bug was not fixed, the part that needs fixing is the 'can_connect'
function
Patch attached.
** Attachment added: repatch
https://bugs.launchpad.net/ubuntu/+source/facter/+bug/732953/+attachment/2081311/+files/repatch
--
You received this bug notification because you are a member of
This bug was not fixed, the part that needs fixing is the 'can_connect'
function
Patch attached.
** Attachment added: repatch
https://bugs.launchpad.net/ubuntu/+source/facter/+bug/732953/+attachment/2081311/+files/repatch
--
You received this bug notification because you are a member of
sorry wrong package..
** Package changed: software-center (Ubuntu) = libvirt (Ubuntu)
--
libvirt, KVM unable to set maxmem
https://bugs.launchpad.net/bugs/669934
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in ubuntu.
--
Public bug reported:
Binary package hint: software-center
In my custom python scripts using libvirt python module and using the
virsh I can't set max memory size, yet in virt-manager it 'appears' to
work..
virsh # setmaxmem AVIRTUALBOX 786000
error: Unable to change MaxMemorySize
error: this
--
libvirt, KVM unable to set maxmem
https://bugs.launchpad.net/bugs/669934
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
sorry wrong package..
** Package changed: software-center (Ubuntu) = libvirt (Ubuntu)
--
libvirt, KVM unable to set maxmem
https://bugs.launchpad.net/bugs/669934
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Tada! You rock. That fix is perfect, ship it.
--
CUPS starts after SAMBA; printers are not available
https://bugs.launchpad.net/bugs/494141
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in ubuntu.
--
Ubuntu-server-bugs mailing
Ah, got it. Thanks for the help. Now I see the interface indicating that
as well. Makes sense that it was moved to linux anyways, at it sounds
like a kernel issue.
--
Gave up waiting for root device after upgrade then busybox console
https://bugs.launchpad.net/bugs/360378
You received this bug
Tada! You rock. That fix is perfect, ship it.
--
CUPS starts after SAMBA; printers are not available
https://bugs.launchpad.net/bugs/494141
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Could someone comment on why this is in fact Invalid? Why was it not
marked a duplicate of another bug?
--
Gave up waiting for root device after upgrade then busybox console
https://bugs.launchpad.net/bugs/360378
You received this bug notification because you are a member of Ubuntu
Bugs, which
Lorents,
I believe that this bug has expired. Bryce Harrington stated that
anyone who experiences this problem should file a new bug report running
ubuntu-bug xorg from the terminal (See post #8). Also, if it isn't
too much trouble I'd like to see if the process I listed in post #7
produces a
Public bug reported:
Binary package hint: netbook-launcher
lsb_release -rd
Description:Ubuntu 9.10
Release:9.10
apt-cache policy netbook-launcher
netbook-launcher:
Wedi Sefydlu: 2.1.12-0ubuntu3
Ymgeisydd: 2.1.12-0ubuntu3
Version table:
*** 2.1.12-0ubuntu3 0
500
** Attachment added: AptOrdering.txt
http://launchpadlibrarian.net/35731020/AptOrdering.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/35731021/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/35731022/CurrentDmesg.txt
**
Ubuntu Version: 9.10
Architecture: 64-bit
Graphics Card: GeForce 8600 GT
Driver Version: 185.18.36
I first noticed this bug after installing Ubuntu 9.10. Upon booting for
the first time Ubuntu recommended that I install the NVIDIA graphics
driver in order to take full advantage of my graphics
I can reproduce this bug as well. Clicking Select Best Server in the
Choose a Download Server dialog causes all of synaptic to hang up. I
can close the both the Software Sources and Choose a Download Server
dialog via Force Quit but synaptic hangs indefinitely and must be
closed from the
Public bug reported:
1) lsb_release -rd
Description:Ubuntu 9.04
Release:9.04
2) amanda-client:
Installed: 1:2.5.2p1-4
Candidate: 1:2.5.2p1-4
Version table:
1:2.5.2p1-4 0
500 http://mirror.cc.vt.edu jaunty/universe Packages
*** 1:2.5.2p1-4 0
100
confirmed, from manually tracing the code via print statements I have
determined that the problem occurs in MainClass.py on line 159
(approximately) with a call to gtk.main(). X hangs indefinitely and the
call to gtk.main() never returns. The only way to kill the program is
to use Ctrl+Alt+F(1,
Public bug reported:
I just installed the 64bit Jaunty Beta today and I found a problem with
sound playback. When I hover over my music files in nautilus, sometimes
white noise (static) plays instead of music. The white noise usually
plays for about 2 seconds before playback halts completely.
I have this problem as well.
Laptop: Toshiba A205-S4777
Version Signature: Ubuntu 2.6.27-9.19-generic
I should also mentioned that I have had this same problem on another
Linux distribution call Foresight. It is very similar to Ubuntu. It
uses the gnome desktop environment and
I responded earlier to this bug report that it was fixed by a kernel
upgrade. The machine that I had this bug on is not running Ubuntu, but
is running Debian/Etch. Therefore, I cannot test this new kernel
against this bug.
Sorry.
--
James D. Freels, Ph.D.
Oak Ridge National Laboratory
[EMAIL
Public bug reported:
Hi,
I have noticed a problem with Hardy Heron. I am not sure exactly how to
describe this problem, but I will do my best. I apologize in advance if I am
not clear. This problem seems to occur whenever I bring my system back up
after a long standby period. The OS boots
I now have this problem in feisty due to an upgrade to kdebase et al on
09/26 (3.5.6-0ubuntu20.4). I would rather not upgrade to gutsy at the
moment and my konsole is NOT usable. Crashes with the following error
message:
konsole
kdecore (KProcess): WARNING: _attachPty() 11
KCrash: Application
of Ubuntu ?
** Changed in: linux-source-2.6.15 (Ubuntu)
Importance: Undecided = Medium
Status: New = Incomplete
James D. Freels, Ph.D.
Senior Research Staff, HFIR Cold Source, ORNL
http://sunsite.utk.edu/wuot/mt/podcast/051807HIFER.mp3
--
SCSI / AIC7xxx / Tape Library Problem
https
This is a bad bug. As a work around until it is fixed, I found I could
print to file (.pdf will work), then open acroread and print from there
and retain all the output as it should be.
--
MASTER: [Feisty] Evolution always tries to print A4
https://bugs.launchpad.net/bugs/86426
You received
Hello. I think this bug is similar, if not identical, to a long-
standing bug I have reported in the debian bug reports, then later in
the kernel bug reports. Please take a look here:
http://bugme.osdl.org/show_bug.cgi?id=5268
Perhaps if someone other than myself can verify this bug and
Public bug reported:
Binary package hint: tar
Please see bug #71255 for the explanation of this bug. The bug was
worked around by installing an older version of tar from
Debian/Sarge/Stable at v1.14-2.2.
** Affects: tar (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
sendsize[8712]: time 0.180: done with amname 'hdb9', dirname '/iso',
spindle -1
sendsize[8706]: time 0.180: child 8712 terminated normally
sendsize: time 0.180: pid 8706 finish time Mon Nov 13 11:16:32 2006
--
James D. Freels, Ph.D.
Oak Ridge National Laboratory
[EMAIL PROTECTED]
http
that is available via
Debian/Testing/Unstable.
--
James D. Freels, Ph.D.
Oak Ridge National Laboratory
[EMAIL PROTECTED]
http://www.comsol.com/stories/hfir/
--
Edgy versions are in compatible with older version
https://launchpad.net/bugs/71255
--
ubuntu-bugs mailing list
ubuntu-bugs
that is indicative of the version
incompatibilities.
** Changed in: amanda (Ubuntu)
Status: Unconfirmed = Needs Info
--
James D. Freels, Ph.D.
Oak Ridge National Laboratory
[EMAIL PROTECTED]
http://www.comsol.com/stories/hfir/
--
Edgy versions are in compatible with older version
you get that is indicative of the version
incompatibilities.
** Changed in: amanda (Ubuntu)
Status: Unconfirmed = Needs Info
--
James D. Freels, Ph.D.
Oak Ridge National Laboratory
[EMAIL PROTECTED]
http://www.comsol.com/stories/hfir/
--
Edgy versions are in compatible with older
Public bug reported:
Binary package hint: amanda-client
After I upgraded to Edgy from Dapper, the amanda client on my desktop
stopped backing up to the amanda server on a Debian/Sarge/Stable system.
The remote server system is running version 2.4.4p3 of amanda whereas
this version on my desktop
a kernel with inotify support?
I have a feeling that the failure to configure an inotify watch may
cause configuration files to not get parsed!
** Summary changed:
- upstart causes hang on boot
+ upstart causes hang on boot (possible inotify)
--
James D. Freels, Ph.D.
Oak Ridge National
hang on boot
+ upstart causes hang on boot (possible inotify)
--
James D. Freels, Ph.D.
Oak Ridge National Laboratory
[EMAIL PROTECTED]
http://www.comsol.com/stories/hfir/
--
upstart causes hang on boot (possible inotify)
https://launchpad.net/bugs/68904
--
ubuntu-bugs mailing list
ubuntu
and causes
hang on boot
+ upstart causes hang on boot
--
James D. Freels, Ph.D.
Oak Ridge National Laboratory
[EMAIL PROTECTED]
http://www.comsol.com/stories/hfir/
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18.1
# Sat Oct 14 16:26:19 2006
#
CONFIG_X86_32=y
Public bug reported:
Binary package hint: upstart
I discovered this bug when upgrading from Dapper to Edgy. The upgraded
system contained upstart and dependent packages ubuntu-minimal, upstart-
compat-sysv, startup-tasks, system-services, upstart-logd. After
upgrading, I rebooted and the
update. In
which case it would be helpful to track down if it came from Ubuntu.
Also, please be a little less confrontational. We are not chastising
you for daring to file a bug, we are just trying to understand what
exactly is going on here.
--
James D. Freels, Ph.D.
Oak Ridge National
would dare to file a bug. Who would dare find a bug ?
I of source have no control of when you do or do not call a bug a bug.
All I can do is report what happened.
From:
Freels, James D. [EMAIL PROTECTED]
Reply-To:
[EMAIL PROTECTED
Public bug reported:
Binary package hint: passwd
this bug is identical to bug #166793 of the Debian tracking system and
was corrected at 4.0.13-1 of Debian. The version in Dapper is
4.0.13-7ubuntu3, however it still lingers. The version in
Debian/Testing is now 4.0.15 and the version in
89 matches
Mail list logo
