hi,
Dose new ZFS allow just removeing FAULTED device, so I have old clean
disk alone,
scrub that,... then REPARTITIONING FAULTED device ( i had incorrect
size, there is boot area also ),
and then attach FAULTED DEVICE AS NEW MIRROR DISK as it was intented ???
zfs remove old-rpool -d
Do you mean this feature which is comi ng,... when ?
https://github.com/openzfs/openzfs/pull/251
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1906542
Title:
echo 1 >>
root@jonipekka-desktop:~# zpool import
pool: rpool
id: 5077426391014001687
state: UNAVAIL
status: One or more devices are faulted.
action: The pool cannot be imported due to damaged devices or data.
config:
rpoolUNAVAIL insufficient
new device_removal feature ,... where it is ? It might work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1906542
Title:
echo 1 >> /sys/module/zfs/parameters/zfs_max_missing_tvds says
I tried remove command before taking it out,
i was in beleaf system will then correct problem,
So basically secon disk has no data and not corrupted,...
I need that option due import readonly -f pool -d dose not fix problem
so i can then copy disk. I have only essential's at backup ,...
Is there anyone who could help me over go this bug so I can rescue my ZFS pool
data,
pool will be lost as I understand. I accidentaly added disk to pool and not as
mirror
what was intention,... and it can nor be removed even there is no data!
--
You received this bug notification because you
Public bug reported:
root@jonipekka-desktop:~# echo 1 >>
/sys/module/zfs/parameters/zfs_max_missing_tvds
-bash: /sys/module/zfs/parameters/zfs_max_missing_tvds: Permission denied
root@jonipekka-desktop:~#
https://www.delphix.com/blog/openzfs-pool-import-recovery
Import with missing top level
I can confirm that ethtool -K eth0 sg off did correct bacula backup problem:
-bacula-sd - bacula-fd communication error that stops backup process
saying Error: bsock.c:427 Write error sending reset by peer
-so far no IPV6 trafic jam's whit aiccu, but single missing packet's
should not stop
Crazy idea, could there be situations when sender increases mtu over receiver
side?
Fundamental question, I tried to understan what ethtool -K eth0 sg off dose in
protocoll level
can anyone explain, it look's medicine at moment.
--
You received this bug notification because you are a member
hi,
I have had two mysteriouse problem's, bacula stop's and says as reason
connecyion lost due too big packets's ( tried to cange mtu no success)
second have been aiccu that dose not recover time to time after
connection get up againg, need's service stop start,...
I just gave sudo ethtool -K
Fix at 14.04 as well please!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239029
Title:
Please add build-dep on libmjpegtools-dev for mplex plugin
To manage notifications about this bug go to:
Yes, 14.04, Brasero can not found even installed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239029
Title:
Please add build-dep on libmjpegtools-dev for mplex plugin
To manage notifications
** Changed in: blcr (Ubuntu)
Status: New = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1357795
Title:
gnuradio dose not work 14.04 libboost1.48 requested
To manage
I have been running blcr beta version whitout crashes,... not tested full
functionality yet.
Probelm fixed and waiting 0.8.6
** Changed in: blcr (Ubuntu)
Status: Confirmed = Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
hi,
I'am very sorry this is not bug! It was caused due apacheDS LDAP server did not
started due
coputer had shutdown whitout clearing apacheDS PID. Due system used LDAP to
share
some user system UID's at cluster it caused premission problem's to apt-cacher
that did
NOT REPORTED anything.
hi,
Real Bug is that NFS logging dose not give clear information wgat's
happening and diagnose is hard to do!
Problem solved:
1) I finaly found upgrade kernel, after installing it gssapi error
message dissapeared and NO ERROR MESSAGES at log's.
2) by useing wireshark I found _kerberos._udp DNS
hi,
Real Bug is that NFS logging dose not give clear information wgat's
happening and diagnose is hard to do!
Problem solved:
1) I finaly found upgrade kernel, after installing it gssapi error
message dissapeared and NO ERROR MESSAGES at log's.
2) by useing wireshark I found _kerberos._udp DNS
Tried to use propose but kernel 13.63 was last no 64 !!!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1365869
Title:
After upgrade to 3.13.0-35.62, rpc.gssd complains about missing
I have nfs4 not working and guessing could it be same problem,... actually
after 12.04 to 14.04 upgrade it stopped to work and I belived it was
pam/ldap realatd problem,... can kindly look at and confirm that this is the
reason and I can wait kernel update ( or upgrade kerenel? ) to get NFS4
Public bug reported:
NFS4 whit LDAP KERBEROS DOSE NOT WORK,... actually
after 12.04 to 14.04 upgrade it stopped to work and I belived it was
pam/ldap realatd configuration problem,... can you kindly look at and confirm
that this is the
reason and I can wait kernel update ( or upgrade kerenel?
*** This bug is a duplicate of bug 1241425 ***
https://bugs.launchpad.net/bugs/1241425
https://bugs.debian.org/cgi-
bin/bugreport.cgi?msg=10;filename=php5.5-compatibility.patch;att=1;bug=710854
In my brief testing the patch linked to above seemed to fix both
problems.
RESULTS TO:
Fatal
It's high level bug at opelapd,... openlapd should prevent all access to
files that can be manipulated correctly only trough openlapd tool's by
owning all rights to file's,... even opening (no changes nade) openlapd
file whit gedit will detroy CRC ! For same reason I give only access to
backup
It's high level bug at opelapd,... openlapd should prevent all access to
files that can be manipulated correctly only trough openlapd tool's by
owning all rights to file's,... even opening (no changes nade) openlapd
file whit gedit will detroy CRC ! For same reason I give only access to
backup
Public bug reported:
After installation + adding via webmin Client Users and Groups two users that
work
after installation.
Booted computer and lapd did not work.
Log:
Aug 21 00:41:33 mpi1 slapd[13499]: ldif_read_file: checksum error on
/etc/ldap/slapd.d/cn=config/olcDatabase={1}hdb.ldif
Public bug reported:
After installation + adding via webmin Client Users and Groups two users that
work
after installation.
Booted computer and lapd did not work.
Log:
Aug 21 00:41:33 mpi1 slapd[13499]: ldif_read_file: checksum error on
/etc/ldap/slapd.d/cn=config/olcDatabase={1}hdb.ldif
I have still one machien not solved,...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1289047
Title:
[Trusty] hostapd package is broken
To manage notifications about this bug go to:
hi,
Upgraded from 12.04 to 14.04 and lost wlan0,...
but problem was at configuration, I forget from interfaces,
iface wlan0 inet manual
pre-up iw dev wlan0 set type __ap
hostapd /etc/hostapd/hostapd.conf
two last lines !
my hostapd.conf :
interface=wlan0
bridge=br0
Public bug reported:
Tried to install gnuradio.
It install's but it complains due it can not find libboos -1.48.0.so ,
it can not due 14.04 I got libboost 1.54.0 and 1.55.0
It could be that doing symlinks could workout as emergency repair
but still eighter new packing or copilation
Public bug reported:
apt-cacher-ng can freeze / JAM if more than one machines are upgradeing
from 12.04 to 14.04.
Machine which is in upgrade can jam/freeze also, for ever, also
file lock's remains and those are bit hard to find due sudo update-manager -d
dose not complain all locks. apt-get
update-manger can freeze whit apt-cacher-ng.
Getting started again is not straight foward
I have still one machine in jam, can not get upgardeing,
it hangs while calculating installation
Useing 02proxy setting. apt-cacher.ng is at allready
updated server.
--
You received this bug notification
*** This bug is a duplicate of bug 1289083 ***
https://bugs.launchpad.net/bugs/1289083
blcr software dose not support current, new, kernels above 3.7 according
berkley laboratoryes,... so I'am wondering how it can be in distribution
at 14.04,... has someone done private patch ???
--
You
Public bug reported:
Hardware: AsRock 990 FX
fstab:
/boot/efi
root@mpi1:/home/joni# efibootmgr --create --part 1 --label Ubuntu Trusty EFI
--loader '\boot\efi\EFI\ubuntu\vmlinuz-3.13.0-32-generic.efi.signed'
BootCurrent:
Timeout: 2 seconds
BootOrder: 0002,,0006,0003,0001
Boot*
WHERE IS THE FIX
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1289083
Title:
blcr-dkms 0.8.5-2.1: blcr kernel module failed to build [configure:
error: Kernel source is configured uni-processor
Installing blcr from distribution is not allways an FIX,... at 12.04 it did not
work at all,.. i will try blcr distributed whit ubuntu know and try to remeber
to give note if it works,... mpich from distribution did work out at my
installation so it's from sources,..
--
You received this bug
Distribution version of blcr ( most likely a stub that only satisfies
compilation depencyes but not functional ) made possible to compile programs.
Acccording software programmers it's not redy for kernels newer 3.7 so it
should not be used until done. So THERE IS NO FIX, you can compile
hi,
--- Comment #1 from Paul H. Hargrove Xlbl.gov 2014-08-02 03:36:20 ---
Joni,
BLCR still does not support any Linux kernel versions newer than 3.7.1.
So, the error message you see for a 3.13.x kernel is not significant in any
way.
Most likely something has changed in how to identify an SMP
please elaborate some more on what the problem here was?
It sounds like:
You had precise-updates repository activated but didn't actually have all the
updates pulled from it? Did you have any PPA's enabled?
--
Joni-Pekka Kurronen
AMRINA, Insinööri AMK veneala
gsm. +358 50 521 2279
http
hi,
One reason found, that was at evneing ifconfig wlan2 down and
at morning ifconfig wlan up,... that stops trafic trough sixxs,...
This is fixed to give restart aiccu after ifconfig wlan up .
Also got new Huawei driver that gives staedy trafic to ppp0.
Still ther have been mystery stops
Hi,
Have same problem 3 almost identical machines and one outdated server as
well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1265035
Title:
gkremld causes system to restart immediately after
Public bug reported:
Computer restart after suspend or shutdown,
it can also hang while shutdown.
Removeing gkremld server removed problem.
Enviroment:
Ubuntu 12.4 precise, latest
Mother Board AsRock FX990
AMD FX 8510
yours,
joni
Description:Ubuntu 12.04.3 LTS
Release:12.04
Public bug reported:
This might be reason:
https://blueprints.launchpad.net/ubuntu/+spec/spinbutton-adjustment-warnings
joni@mpi2:/media$ sudo nano /etc/bacula/tray-monitor.conf
joni@mpi2:/media$ bacula-tray-monitor -c /etc/bacula/tray-monitor.conf
(bacula-tray-monitor:22255): Gtk-WARNING **:
So, I do not see difrence at sixxs interface after restarting aiccu, sixxs
interface
repair's, resets somthing at kernel routing,... correct ???
It can be incoming packets are not coming to ping6 even PC receives,...
ping6 out put is here :
joni@mpi2:~$ ping6 ipv6.google.com
PING
I do next dump both IPV6 and IPV4 trafic if that brings more!
Any other ideas,... let's wait when IPV6 drops again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1261653
Title:
aiccu can not route,
tcpdump:
- IPÅV6 dispeared
- started tcpdump
- ping6 ipv6.google.com started
joni@mpi2:~$ sudo tcpdump -i sixxs
Password:
tcpdump: WARNING: sixxs: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on sixxs, link-type RAW (Raw IP),
Public bug reported:
ISP here at Finland has run out IPV4 but dose not offer IPV6 eighter,
customers are held behind NAT and changeing IPV4 address plus
at 4G Radio network they change conction between 2G - 3G - 4G
modes continously so packet's can be lost and timeing can be tricky!!!
You can
Technical detail is that fact operator changes IP time to time as well
there can missing pacets due operator switches radio mode of conection
between GRPS-UMTS-HSPA,
If I do not restart aiccu connection dose not come back but if
do restart then it comes back immediately.
Software:
If operator could block AYIA I belive aiccu did not start !
Restarting is not due aiccu is down or not running,...
reason or another it hangs ,... sudo restart aiccu
start's incoming ipv6 trafic, ping6 send's packages
while aiccu/tunnel is hangig but no response nor error!!!
So IPV4 is
Problem to supply any usefull is that it dose not happen every days and
sometimes
twice
Most likely this somekind of timeing / protocol,... related problem,
there have been same kind of reports but those have been negled
or system has started to work whitout explanation.
Doing dump is not
once a day, twice a day,... basically I use IPV4 from intranet so can
I can not note when it happens,...
Yes, ntps,...
I mean protocol level timeing, response time, missing packets,...
Basically aiccu should not change iptables, and shorewall dose it
only ones when it have started,...,... there
Public bug reported:
sudo -u mythtv mythbackend
2013-12-13 21:48:22.612144 C Application binary version (0.25.20120408-1) does
not match libraries (0.25.20120506-1)
2013-12-13 21:48:22.612148 W This application is not compatible with the
installed MythTV libraries. Please recompile after a
Solution was to download correct package from precise-updates,... but still
packges should be compatible from same source.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1260844
Title:
Mythtv
Public bug reported:
install failure, dose not complete installation:
joni@mpi1:~$ sudo apt-get install isc-dhcp-server
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu
Luetaan tilatiedot... Valmis
Seuraavat ylimääräiset paketit on merkitty asennettaviksi:
Solution found, due problem's decode some DVB there was updated install that
affected
such way that pulseaudio was upgraded 1.2 version.
Downgardeing all audio drivers, libraryes to 1.1:15 solved problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
hi,
http://www.alsa-
project.org/db/?f=fa22eb1eba1ad1132fd9671a304d509e54f7e63c
-updated jut today two machimes and lost audio,
those have installed as workstation but all apcakahes are updated
two week's ago to same as at server
-update did not mix server'e
hi,
WakeOnLan works only from suspend state. That work's most cases.
Realted: -acpi
LTSP workstation can not be ken up from suspend state.
joni
** Package changed: linux (Ubuntu) = acpi
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
** Description changed:
-
hi,
http://www.alsa-
project.org/db/?f=fa22eb1eba1ad1132fd9671a304d509e54f7e63c
- -updated jut today two machimes and lost audio,
- those have installed as workstation but all apcakahes are updated
- two week's ago to same as at server
+ -updated
-Pekka Kurronen
AMRINA, Insinööri AMK veneala
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1172307
Title:
kernel ? no audio after upgrade
To manage notifications about this bug go to:
https
Tried several time, i try tomorrow at machine, now it was trough ssh,
also tried:
/apport-cli -f -p /package name/--save bug.apport/
/ubuntu-bug -c //bug.apport
===
/
24.04.2013 21:32, Fabio Marconi kirjoitti:
ubuntu-bug -s audio
--
Joni-Pekka Kurronen
AMRINA, Insinööri AMK veneala
3.2.0-38-generic + nvidia from NVIDIA directly and build
processor FX8150
AsRock FX990me mainboard
I have tried lot experiments but:
a) sudo shutdown -P now
b) computer goes down but start's immediately power off
I supposed problem is somwhere ACPI and wakenLan , wake by device,...
and
ideas's:
-could it be driver ?
** Changed in: linux (Ubuntu)
Status: Expired = New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
wake on lan dose not work
To manage
dear Paul,
I'am not angry. Linux is volunteer based system
and if someone ( quite many ) dose something
that's great.
Even I have read bug report, been Alan's pages as
weel BLRC home, I could not figure out there
is experimental version available !!
I have wordblindness but that only help's
There is NO FIX !!! Going back in kernels is NOT A FIX !
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/804943
Title:
blcr kernel module failed to build with kernel 3.0 : configure: error:
NOT FIXED
N OF I X
CHANGE STATUS - NOT FIXED
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/804943
Title:
blcr kernel module failed to build with kernel 3.0 : configure: error:
https://upc-bugs.lbl.gov/blcr/doc/html/BLCR_Admin_Guide.html
Berkeley Lab Checkpoint/Restart (BLCR) Administrator's Guide
This guide describes how to install, configure, and maintain Berkeley Lab
Checkpoint/Restart (BLCR) for Linux. For usage instructions please see the
companion BLCR User's
We need new status, Product Not Compatible,
there is no solution to problem until someone dose new blcr version,...
Having blcr-* packages at distribution is miss leading and those should be
removed
from ditribution OR CLEARLY MARKED AS:
UN-FUNCTIONAL, package held to keep
Same here whit 12.5 LTS 64 bit,... but it's anoying
that syslog fill's whit below shit,...
=
Dec 2 23:28:14 kurrola kernel: [28963.624076] Unknown OutputIN= OUT=lxcbr0
SRC=10.0.3.1 DST=10.0.3.255 LEN=316 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP
SPT=631 DPT=631 LEN=296
Dec 2 23:28:21
** Attachment added: _bin_bash.1000.crash
https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1033433/+attachment/3371581/+files/_bin_bash.1000.crash
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Have tried re-insattaltion,, ext, problem is still there,
have not time to learn gdb but if get instruction I can test,...
debian realted forum's give's glue that could be broken gconf
and sugget rebuilding database whit gconf-rebuild,... and script/software
can's find from ubuntu
apport information
** Tags added: apport-collected precise running-unity
** Description changed:
System and installation:
https://sites.google.com/site/jpsdatareviewstheboy007/ubuntu-lts-12-4
-companion-whit-ltsp-mpich2-elmer-openfoam
wakeonlan, powernap
Unfortunately could
apport information
** Attachment added: AlsaDevices.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321971/+files/AlsaDevices.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: ProcEnviron.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321984/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: ProcInterrupts.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321985/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: Card1.Codecs.codec.0.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321978/+files/Card1.Codecs.codec.0.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: Lspci.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321980/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
wake
apport information
** Attachment added: UdevDb.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321988/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
apport information
** Attachment added: PulseList.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321987/+files/PulseList.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: PciMultimedia.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321982/+files/PciMultimedia.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: ProcCpuinfo.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321983/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: Card0.Codecs.codec.0.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321976/+files/Card0.Codecs.codec.0.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: UdevLog.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321989/+files/UdevLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
apport information
** Attachment added: WifiSyslog.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321990/+files/WifiSyslog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: BootDmesg.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321974/+files/BootDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: Card1.Amixer.values.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321977/+files/Card1.Amixer.values.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: ArecordDevices.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321973/+files/ArecordDevices.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: Lsusb.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321981/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
wake
apport information
** Attachment added: ProcModules.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321986/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: AplayDevices.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321972/+files/AplayDevices.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: Card0.Amixer.values.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321975/+files/Card0.Amixer.values.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: CurrentDmesg.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321979/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
hi,
Have tested dose not work, F9 settings, f10:
1) PCI PME enabled
2) PCI PME enabled + AMD POWER SAVE states
Behaviour:
PCI PME causes computer immediately startup after shutdown delay 0.1 -
0.5sec
So wakeonlan can not be tested whit that setting,...
I have wiresharked net while
apport information
** Tags added: apport-collected precise running-unity
** Description changed:
System and installation:
https://sites.google.com/site/jpsdatareviewstheboy007/ubuntu-lts-12-4
-companion-whit-ltsp-mpich2-elmer-openfoam
wakeonlan, powernap
Unfortunately could
kernel-unable-to-test-upstream
some problem whit header's file and Nvidia can not
install,...
could not install powernap powerwake,...
joni
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Possible reasons,...
I was surfing and trying to find glue for this problem.
One could be AMD 8520 power saweing state's, S3 S5
I do some BIOS setting's testing.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
System and installation:
https://sites.google.com/site/jpsdatareviewstheboy007/ubuntu-lts-12-4
-companion-whit-ltsp-mpich2-elmer-openfoam
wakeonlan, powernap
Unfortunately could not get wakeonlan to work whit
AsROCK990FXextreme3 mainboard. If I ENABLE
PCI ON ( PME )
Most likely boot related, other : asRock MainBoard BIOS, ltsp-server-
standalone
** Package changed: glib2.0 (Ubuntu) = grub (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
Public bug reported:
hi,
Have tried to re-install package,... any way problem dose not
dissapear,..
===
Aug 6 10:59:54 mpi1 kernel: [ 78.223910] dconf-service[2931]: segfault at 0
ip 7f7e3a4e8bbe sp 7fff0ace7740 error 4 in
libglib-2.0.so.0.3200.1[7f7e3a468000+f2000]
Aug 6
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1033433
Title:
dconf-service[2931]: segfault at 0 ip 7f7e3a4e8bbe sp
7fff0ace7740 error 4 in libglib-2.0.so.0.3200.1
To manage notifications
hi,
Apport is on,... from /var/crash can not find report,..
syslog say's:
g 6 13:41:08 mpi1 rpc.idmapd[969]: nss_getpwnam: name 'nob...@dy.fi'
does not map into domain 'localdomain'
Aug 6 13:41:08 mpi1 rpc.idmapd[969]: nss_getpwnam: name 'r...@dy.fi'
does not map into domain 'localdomain'
I can start gdb but ever had used it so
what I should do???
john
06.08.2012 14:49, Sebastien Bacher kirjoitti:
can you use gdb to get a stacktrace?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
*** This bug is a duplicate of bug 1020912 ***
https://bugs.launchpad.net/bugs/1020912
Public bug reported:
one machine shows this computers software
but this machine dose not show other machine info.
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: software-center 5.2.3
1 - 100 of 217 matches
Mail list logo