My kernel was stuck on 4.4. I had to manually update /boot/grub/grub.cfg
with 'sudo grub-mkconfig -o /boot/grub/grub.cfg' to get the 4.15 kernel
to be available in grub to boot from. After that, and booting from 4.15
kernel, I can get bash into focal lxd container. Marking invalid.
** Changed in:
Public bug reported:
I cannot get a bash shell into a focal container on my bionic host.
stdout shows TIOCGPTPEER unavailable message.
`lxc ls` shows it is running, and I can ping it's IP address.
$ lxc exec focal-NOTREAL -- bash
Error: TIOCGPTPEER required but not available
$ uname -a
Linux
@Juerg,
Is it correct that all that is required to make v3d driver work on armhf
pi3+b is to modify the /boot/firmware/usercfg.txt to include:
dtoverlay=vc4-kms-v3d,cma-64,cma-128
@Jon,
Note that the pi-gadget default uses fkms, not kms. For example the 18 armhf:
OK, so you are saying it is really not a kernel fix but is rather an
enablement file change/config. thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1889223
Title:
vc4-kms-v3d boot failure
Hi, a fix for this is needed for an important project. Can we please get
a sense of the expected time frame for the fix landing?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1889223
Title:
This is an important issue blocking the project. Can we please set the
importance and assign this? Thank you.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1889926
Title:
Can't access gpio mapped
Public bug reported:
On released (and apt updated) 20.04 armhf preinstalled server on Pi3B+,
we cannot use pigpio C program to access memory map for gpio. Customer
says the same code works fine on 18.04.
ubuntu@ubuntu:~$ sudo ./pigpio/kyle.o
2020-07-31 18:36:11 initPeripherals: mmap gpio failed
Project noticed this frame buffer "failed" message in boot console and
we are not sure if it is problem or not:
Starting kernel ...
[0.313431] kobject_add_internal failed for 3e812000.framebuffer with
-EEXIST, don't try to register things with the same name in the same
directory.
[
Public bug reported:
Booting 20.04 armhf preinstalled-server on Pi3b+ with vc4-kms-v3d
selected [1] causes boot failure with [2] output on UART. Further system
info in [3]
Side note: Booting with the same usercfg.txt but with the 18.04 vc4-kms-
v3d.dtbo file "works": the boot is normal without
Customer says: "... using the `snapd` golang API, but that just calls
`GET /v2/interfaces`"
And:
Can someone please verify, for certain, the internal name for the core snap has
changed to `system`. I am seeing this when using the snapd API to request
information about available connections.
I see nplan 0.32~16.04.4 in core currently in edge:
16-2.32.5+git694.b490763
Not easy to figure out which revision of core contains a particular
version of a particular deb, since I can't find core build manifests
FWIW
--
You received this bug notification because you are a member of Ubuntu
When can we expect this to land in Core on stable? Thanks
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1747714
Title:
network manager snap service name regression
To manage notifications about
Hello, when can we expect this to land in Xenial? Customer using Core hit this
and is the original reporter.
thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1747714
Title:
network manager
Any idea when a time frame for this can be addressed? Is a customer
issue. Thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1747714
Title:
network manager snap service name regression
To
Public bug reported:
A previous code change seems to have been dropped from nplan on xenial.
The change enabled netplan to restart network-manager service when
netman is installed as a snap.
Without the change, netplan tries to restart the debian packaged service
name of netman.
Here is the
Since that was merged, should this be fix committed?
What snapd version will this be in? Thanks
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1717857
Title:
UDisks2 interface restricts sending
** Changed in: linux-raspi2 (Ubuntu)
Importance: Undecided => High
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1652270
Title:
Could not boot into RPi3 with kernel 4.4.0-1038-raspi2
To manage
Any progress on this? I hit the same issue ("Starting kernel" then
nothing) when trying to boot a client image on the pi3. Cheers.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1652270
Title:
Could
** Summary changed:
- I can't see the sunset and the sunrise time and neither the information about
the moon
+ No manual location setting causes scope issues
** Description changed:
+ NEW DESCRIPTION:
+
+ Some users want to be able to disable location (to save battery) and
+ they want to be
** Project changed: savilerow => canonical-scopes-project
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1404824
Title:
[Scopes] There is no way to uninstall a scope on ubuntu phone
To manage
Dave - thanks.
My guess is this has nothing to do with the Today scope.
I guess is that there is something in the plumbing that does not handle
losing a network during a fresh - so I am glad that Michi is aware.
Regarding network, I wrote and attached here a test scope that displays
the scopes
Given my above experiences, and given that you do have elpais installed
and it may be enabled in your Today scope (can't see from your settings
image in comment #7), can you please:
Ensure that El Pais and holidays scopes are DISABLED in today scope
settings, and see if you can reproduce this?
twice now with elpais and holidays disabled in Today during refresh I
walked out of wifi range and *expected* resulted displayed [1]. Display
was not limited to Day scope.
Possibility: these child scopes do not handle loss of network during
refresh correctly. They should simply return from the
ok, with holiday scope disabled, I walk out of wifi range while a today scope
refresh is ongoing and I get similar results:
* only the Day scope displays
* but this time a different child scope displays the TimeoutExecption: elpais
[2016-11-03 17:12:03.323] ERROR:
Noting the TimeoutException on holidays scope above, I've tried
launching holidays from Manage page. No results display.
running holidays scope from command line with scope-data tool I get this with
no displayed results:
phablet@ubuntu-phablet:~$ ./scope-data
by the way, issuing "restart scope-registry" brings holidays scope back
to life and fixes the today scope on refresh.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1637841
Title:
Today scope
After walking back into wifi range (on my second reproduction) and
refreshing Today scope, only Day scope displays (although it does
display normally).
The scope-reg.log contains this now reliably on refresh with only Day scope
showing:
[2016-11-03 16:56:46.984] INFO: Registry:
I was just able to produce a MiddelwareException twice by walking out of
range of my wifi while a Today scope refresh was in progress.
In both case the resulting display ONLY the Day scope.
In one case there was also a twitter scope panic/crash.
Attached my scope-reg.log
** Attachment added:
David H.
In one of your other bugs about Today scope display issues [1], I think
you mentioned that you made the rootfs "/" read-write (in order to
change the default scope background as I recall).
Doing this is inherently dangerous and can cause all kinds of problems
that are essentially
And provide the scope-registry.log if the issue is reproduceable with
that recent today scope. (I am interested to see if the
MiddlewareExecption occurs again).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
David H,
Assuming you have not modified any other parts of your rootfs, let's get
you the latest Today scope and see if you can reproduce any of the
issues, just to be sure.
Please install the attached and reboot (just to get the logs cleared)
and comment back with further info.
** Attachment
Hi David H.
So, a few things which I will address in separate comments for clarity.
First, your scope-registry.log contains a
unity::scopes::MiddlewareException
[2016-11-02 17:04:35.351] ERROR:
com.canonical.scopes.dashboard_dashboard: ReplyImpl::error():
unity::scopes::MiddlewareException:
** Changed in: savilerow
Status: Triaged => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1322178
Title:
new armhf click build chroot is DEB_BUILD_ARCH=amd64
To manage
This was fix released a long time ago.
I tested version com.canonical.scopes.photos-local_1.38_armhf.click in
clicks (which was in ota 13) and the photo rotated from gallery then
displays rotated in photos-local (My Photos) scope.
** Changed in: savilerow
Status: Fix Committed => Fix
Hi Bhaskara:
This issues does not seem to have anything to do with the facebook
scope.
I am re-assinging to the unity-scope-mediascanner project since that
provides the "Video" scope (which is not easy to figure out).
My guess is that the Video scope shows popular videos from YouTube and
Vimeo
Larry, thanks for your insight here.
Vladimir, it seems that either there was something wrong with your
CC.json file or with your container. So on that basis I'll mark this bug
invalid.
I is probably not a good idea to manually modify CC.json files. If I
understand correctly, all container
Vladimir: let's try uninstalling your desktop apps scope as follows:
phablet@ubuntu-phablet:~$ click list | grep libertine
libertine-scope.ubuntu 1.3.2.1
phablet@ubuntu-phablet:~$ sudo click unregister --user phablet
libertine-scope.ubuntu
[sudo] password for phablet:
(process:20113):
does this command list any libertine apps:
libertine-container-manager list-apps --json | grep name
phablet@ubuntu-phablet:~$ libertine-container-manager list-apps --json | grep
name
error processing
Nice work Vladimir!
Based on this, I will have removed Today scope from this bug and made
other top-level bug modifications.
Please, try installing the "Desktop Apps" scope as describe here:
https://bugs.launchpad.net/libertine-scope/+bug/1617545/comments/9
Please let me know the result here.
Vladimir: Great!
I meant to write "Apps" not "Desktop Apps" :( That is: you get to Manage
page from Apps (not from Desktop Apps). Sorry about that typo.
Anyway, it does *seem* that the problem is not caused by Today scope.
Let's continue and check if favoriting other scopes causes the same
Ah, now I understand: Today scope is the first scope displayed and you
are stuck there.
you can reset scope favorites like this:
phablet@ubuntu-phablet:~$ gsettings set com.canonical.Unity.Dash
favorite-scopes "['scope://clickscope']"
phablet@ubuntu-phablet:~$ restart unity8-dash
then today
Hi Vladimir:
I'd like to see if we can rule out the Today scope as the cause of
unity8-dash high CPU utilization.
So:
Swipe up from the bottom of the Desktop Apps scope to see the scopes
Manage page.
Ensure your day scope is NOT a favorite.
HOW: favorited scopes are listed in a special
Vladimir: regarding your comment #36. If the blue progress bar is going
back and forth at the bottom of the today scope, it means it has not
completed. if this continues for about 40 seconds, it should then stop
automatically (all scopes do - they time out). If this happens, please
grab
Vladimir does unity8-dash have very high cpu usage even when Today scope
is not favorited and not launched?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1626180
Title:
Today Scope not clickable
if you have this issue, you can also try this. If it works, please
comment the result here:
$ stop unity8-dash
$ sudo rm -f /var/crash/*
$ rm -Rf ~/.cache/QML
$ start unity8-dash
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Vladimir: your best bet for liberitne questions is freenode channel
#ubuntu-libertine
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1626180
Title:
Today Scope not clickable after OTA-13
To manage
Vladimir - thanks. I've just added unity8 to the bug based on the
exception (even though it is caught). we will have to see what they
think.
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
And an annotated pastebin of the unity8-dash log:
https://pastebin.canonical.com/165995/
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1622423
Title:
My activity child link disappears after logged
Just noting that another bug relates to the link to child, which may be
a display issue: https://bugs.launchpad.net/today-scope/+bug/1508905
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1622423
Some debug info:
I've attached a debug version of the today scope that only aggregates
twitter and fitbit.
After installing, find it in Manage with this title "FLToday".
Starting condition:
* disable twitter in this agg scope from settings
* disable your login to fitbit account in settings >
Hi Pawel, Per our irc conversation, this is the link-to-child bug I was
referring to. See comment #9 particularly.Thanks for your input.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1622423
Title:
** Changed in: unity8 (Ubuntu)
Status: Expired => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1508905
Title:
Graphics disorder, a "claw" appearing
To manage notifications about
** Changed in: today-scope
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1546733
Title:
Update of today screen messes up scopes layout.
To manage notifications about
The log exceptions are due to handling cases where the incoming result
lacks art in the expected result attribute and we attempt to check other
result attributes to find it. This code was trying to access a result
attribute that did not exist in some cases and threw and execption.
--
You
filed bug 1599948 for the el pais related exception.
** No longer affects: canonical-scopes-project
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1599754
Title:
Dash restarts in the middle while
Seems the el pais related exception is not required for the core
symptom. I just simply rebooted and refreshed the news scope twice (with
el pais disabled in news). I saw no exceptions in the scope-
registry.log, but the hang on a long refresh followed by dash restart
did occur.
--
You received
I find that the el pais scope reliably causes the log error in comment
#1 in both news scope and in today scope (dashboard).
Disabling el pais in both fixes it (no more exceptions).
** Also affects: canonical-scopes-project
Importance: Undecided
Status: New
** Changed in:
Public bug reported:
On this system [1], installed with --bootstrap, I allowed all location
related bits as prompted.
But, when I looked in a scope (for example NearBy), I found that the
scope did not have a location and that the Enable Location settings
normally present in scopes was not
This seems like a unity problem. Adding unity8 to the bug.
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1508905
Title:
Searching by filename was never supported in My Photos scope. (Searching
by date is)
** Changed in: photos-scope
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi Albert.
Check this
https://developer.ubuntu.com/api/scopes/cpp/sdk-15.04.4/unity.scopes.CategoryRenderer/
Search for "collapsed", you will find:
"
collapsed-rows Number of result rows displayed while the category is collapsed;
possible values: any non-negative integer, where 0 fully expands
I saw this happen too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1593035
Title:
Scope category layout: vertical-journal does not follow the value of
collapsed-rows
To manage notifications
Assigning to Enwei since he will be reworking Instagram (even though it
will be removed from images for a while).
** Changed in: canonical-scopes-project
Assignee: (unassigned) => Zhang Enwei (zhangew401)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
canonical-scopes-project is used to bug scopes that do not yet have
dedicated public lp projects.
** No longer affects: savilerow
** Also affects: canonical-scopes-project
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs,
** Description changed:
OTA 10
links created by puritine-conf upstart are not updated to
ContainersConfig.json and the rootfs when puritine click is installed
not through custom tarball.
Since the links are not updated, libertine does not try to use the new
puritine container
Pretty sure this is not a scope implementation bug.
Scopes just get their location passed in from unity-scope-shell.
I notice that nearby scope shows the gps derived precise location, and
that scope uses the same shared object as the today scope, so when an
agg scope (today, nearby, news,
Public bug reported:
OTA10:
I find that on tapping Cancel after entering a search query, the scope's
run() method executes twice.
For example: calls-scope always prints "CALLS starting" on entering
run().
While watching scope-registry.log:
(launch or refresh calls-scope)
CAllS starting
(enter
Hi unity8, what OTA is needed for scopes to auto rotate?
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1574165
Title:
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1573996
Title:
Scopes can get confused and misaligned with poor wifi
To
I pulled the latest translations and have rebuilt as 1.5 for release in
ota11.
** Tags added: ota11
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1429548
Title:
The Holidays scope has a wrong
Hi Wolfgang,
That video is private on youtube.
Cheers
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1544957
Title:
Scrolling is not smooth
To manage notifications about this bug go to:
Hi Henrik,
Thanks for filing. This is most likely a duplicate of a unity8, so I
will add unity8 task and let them mark as duplicate (or not).
I have a:
current build number: 305
device name: krillin
channel: ubuntu-touch/rc-proposed/bq-aquaris.en
And I am not able to reproduce :(
** Also
** Tags added: ota11
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1569492
Title:
can't select primary nav filter sometimes
To manage notifications about this bug go to:
As discussed in our hangout, my understanding (about which I am not 100%
certain) is that only an option selector filter set to single select can
be the primary navigation. So, when the user selects a new option, the
widget & overlay should disappear (just as it does with departments).
--
You
Hi Albert,
I set this to New again in unity8 because I am not 100% sure you are
correct.
For example the News Scope has departments. When you select a
department, the department selection gui disappears and the new
department results display. But not in the case of the option filter as
primary
** Changed in: savilerow
Status: Triaged => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1468585
Title:
the photo which in photo scope the display time don't accordance with
the
** Changed in: today-scope
Status: New => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1539446
Title:
Today scope hangs-on after OTA9 update
To manage notifications about this
** Changed in: savilerow
Status: Triaged => Confirmed
** Changed in: savilerow
Status: Confirmed => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1537132
Title:
Result
Public bug reported:
When you are using an option filter as the primary navigation widget,
usually dismissing the filter widget by tapping results causes a result
preview to display, but the user really wants to see all results and
only dismiss the filter overly.
You can see this in the attached
** Changed in: savilerow
Status: New => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1537139
Title:
Selecting new dept should cancel current query
To manage notifications about
Public bug reported:
One sometimes cannot select the lowest options in an option select
filter when it is the primary navigation widget for the scope.
Here's a case.
Using the attached fake 500px scope:
1) Enter a query string (wait 30 seconds for the query to complete -- FYI this
takes a long
*** This bug is a duplicate of bug 1546733 ***
https://bugs.launchpad.net/bugs/1546733
marking as duplicate of 1546733 to simplify bug tracking then.
** This bug has been marked a duplicate of bug 1546733
Update of today screen messes up scopes layout.
--
You received this bug
Hi,
Thanks for reporting this.
Michal's report supports the idea that this is not related to an
individual scope but is related to unity8, so I am adding this task to
the bug.
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification
Thanks for testing that.
Very interesting that Holidays scope shows the message "Location data
must be enabled" even when you location data turned on.
This could either be a bug in the holidays scope (it has location data
but it does not think it does), or perhaps the location data passed to
the
Public bug reported:
There is no ability to change the current department from code. This
means that the scope cannot "do the right thing" when a user enters a
query string in some cases.
For example, suppose a scope has departments that represent a web api's
departments. And suppose the web api
Can either of you take a video of the behavior and attach it?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1544957
Title:
Scrolling is not smooth
To manage notifications about this bug go to:
Because this is not news-scope specific, I am removing that task.
** Changed in: news-scope
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1567750
Title:
can't
I believe swiping through previews was removed in OTA10 because it was
potentially confusing with full sideways swiping (as used to display
open applications for example). Personally, I think a way to move
between previews without moving back to the surfaced view is an
important feature.
** Also
Public bug reported:
A scope dev can set the color of page header foreground items (like search
magnifying glass and favorite widget) in the scope ini file:
PageHeader.ForegroundColor=#ff
Problem:
This does not also set the color of the new filter button, but it should
** Affects:
Michi, This is a new issue now tracked in
https://bugs.launchpad.net/savilerow/+bug/1562121
cheers
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1384243
Title:
photos edited in gallery do not
Public bug reported:
Allan LeSage reports (in [1]) that photos put on the device by MTP do
not display in My Photos after they are rotated in Gallery.
He also reports that photos taken by camera DO display (rotated) after
rotation in Gallery.
And I find photos downloaded through Browser DO
Hi Allan,
This fix handles photos taken by the camera (then rotated in gallery)
and photos downloaded through the browser(then rotated in gallery), to
name two.
I am guessing this is therefore a different issue, perhaps something to
do with MTP & mediascanner & gallery. Therefore, I think this
After discussing this with unity-scopes-api folks on irc, and after
getting a bug about the twitter scope showing "" instead of "&", it
seems reasonable to extend this bug to include some known subset of html
entities (in addition to a known set of mark ups).
Therefore I am marking the
Apologies: please use 1.30 attached here and in clicks branch
** Attachment added: "com.canonical.scopes.photos-local_1.30_armhf.click"
https://bugs.launchpad.net/ubuntu/+source/unity-scopes-api/+bug/1384243/+attachment/4606460/+files/com.canonical.scopes.photos-local_1.30_armhf.click
--
Attaching version 1.29 (also in clicks branch) to pick up the mod Michi
recommends.
** Attachment added: "com.canonical.scopes.photos-local_1.29_armhf.click"
Ah, thanks Michi.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1384243
Title:
photos edited in gallery do not display edited in "My Photos" scope
To manage notifications about this bug go to:
** Tags added: ota10
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1384243
Title:
photos edited in gallery do not display edited in "My Photos" scope
To manage notifications about this bug go to:
clarifying reason 1) it may be unreasonable to expect PreviewButtonColor
to control button color *outside* of a preview
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1382139
Title:
scope appearance
This bug was marked Invalid but with no explanation :)
However I think it is invalid for the following two reasons:
1) It may be unreasonable to expect PreviewButtonColor to control button color.
2) We don't use this any more for login buttons in an aggregated context: we
use an icon.
**
Unity seems to need another slash now in the result art uri:
* "image://thumbnailer/pathtoimage" fails
* but "image://thumbnailer//pathtoimage" works
So I've adjusted the result art uri accordingly.
fixed in 1.28 attached to bug and pushed to clicks since this is
probably needed for OTA10.
**
1 - 100 of 465 matches
Mail list logo
