Thanks Seth,
I can confirm after having remove the temporary hack Debian package
firmware-bnx2, upgrading the linux-firmware package to 1.172 has fixed the
issue. The bnx2 firmware files are there and the server comes back up after
reboot with network interfaces working as expected.
Regards,
Quick, very temporary, and very dirty hack, copy the Debian firmware-bnx2
package to the machine and dpkg -i it:
https://packages.debian.org/buster/all/firmware-bnx2/download
netplan apply then brings the network up immediately, and only the firmware for
bnx2 was copied.
Obviously the Ubuntu
Just installed today's (1st March 2018) daily server CD image on a Dell
server with Broadcom BCM5716 chips and have had the same issue with the
bnx2 firmware missing, it failed on both the network configuration and
after install.
--
You received this bug notification because you are a member of
Hi Andrew,
Installing that version (rsync_3.1.1-3 from the Vivid repo in this case - no
dependency problems) on the machine initiating (which is also the target) the
rsync didn't fix it.
However, installing it on the source machine as well seems to have fixed the
problem.
Regards,
Tom
--
You
Hi Andrew,
Installing that version (rsync_3.1.1-3 from the Vivid repo in this case - no
dependency problems) on the machine initiating (which is also the target) the
rsync didn't fix it.
However, installing it on the source machine as well seems to have fixed the
problem.
Regards,
Tom
--
You
I can confirm I still get this error on Ubuntu 14.04 (all up to date)
rsync:
Both machines: 3.1.0-2ubuntu0.1
File is a .sql.gz file, 1.5 GB in size, as above, --skip-compress=gz doesn't
help:
.
dbdump.sql.gz
0 0%0.00kB/s0:00:00
inflate returned -3 (0 bytes)
rsync
I can confirm I still get this error on Ubuntu 14.04 (all up to date)
rsync:
Both machines: 3.1.0-2ubuntu0.1
File is a .sql.gz file, 1.5 GB in size, as above, --skip-compress=gz doesn't
help:
.
dbdump.sql.gz
0 0%0.00kB/s0:00:00
inflate returned -3 (0 bytes)
rsync
Likewise, date/time missing on login on 14.04 as per previous bug (which
I also saw sometimes on previous versions of Ubuntu)
Killing the /usr/lib/unity/unity-panel-service process restored the
time.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I can confirm that I've once again seen this bug with the clock missing
(but other icons visible) but now in 14.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239710
Title:
indicator-datetime
I can confirm this bug has now been fixed in libgcc1 package version:
4.9-20140217-0ubuntu1
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1280183
Title:
Package missing
Fixed in libgcc1 version 4.9-20140217-0ubuntu1
** Changed in: gcc-4.8 (Ubuntu)
Status: Confirmed = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1280183
Title:
Package missing
Public bug reported:
The latest package available on testing (4.9-20140213-0ubuntu1) is missing the
/lib/x86_64-linux-gnu/libgcc_s.so.1 file.
This causes apt-get to break immediately after apt-get upgrading.
The package is unusually small:
-rw-r--r-- 1 root root 1286 Feb 14 09:38
Just so it's obvious what is happening:
# apt-get -y upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
libgcc1
1 to upgrade, 0 to newly install, 0 to remove and 0 not to
Hi Franck,
Thanks, but unfortunately I apt-get clean after each upgrade, however I just
wget'ed the file from the ubuntu package site, which temporarily sorted things
until the package is fixed.
Thanks,
Tom.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
Just for anyone who needs an emergency fix:
wget
http://de.archive.ubuntu.com/ubuntu/pool/main/g/gcc-4.8/libgcc1_4.8.2-15ubuntu3_amd64.deb
dpkg -i libgcc1_4.8.2-15ubuntu3_amd64.deb
Hope that helps.
** Tags added: trusty
--
You received this bug notification because you are a member of Ubuntu
Dac,
You may be on to something.
I've been getting this problem and I too run dual monitors with only the
launcher on the left hand display rather than the default on both screens.
Tom.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
*** This bug is a duplicate of bug 1237414 ***
https://bugs.launchpad.net/bugs/1237414
I can confirm this affects me, but I'm running in English (United
Kingdom).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Wow, that was quick, good job guys =)
Thanks,
Tom
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to nagios-plugins in Ubuntu.
https://bugs.launchpad.net/bugs/1244713
Title:
invalid syntax for check_ssh plugin
To manage notifications
Wow, that was quick, good job guys =)
Thanks,
Tom
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1244713
Title:
invalid syntax for check_ssh plugin
To manage notifications about this bug go to:
Public bug reported:
Since upgrading to 13.10 our check_ssh has been failing with the
error:Usage: with an unknown state.
After a little digging it seems that the following file has the incorrect
definition for the check_ssh checker:
/etc/nagios-plugins/config/ssh.cfg
Specifically the first
Public bug reported:
Since upgrading to 13.10 our check_ssh has been failing with the
error:Usage: with an unknown state.
After a little digging it seems that the following file has the incorrect
definition for the check_ssh checker:
/etc/nagios-plugins/config/ssh.cfg
Specifically the first
Public bug reported:
The installer complains that /etc/php5/conf.d/ssh2.ini doesn't exist.
This is because the conf.d directory doesn't exist, the simple temporary
workaround for this is to create the /etc/php5/conf.d directory, install then
copy or symlink the file into
Likewise, with a fresh install of Saucy, up to date as of 9th Oct 2013, the
same thing happens.
/var/log/syslog shows JS errors saying that dbus couldn't be found in the
search path.
This appears to be the same as the upstream bug:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=718552
**
I can confirm the same issue with up to date Ubuntu 12.10.
Connecting to solr gives 404s in jetty's logs.
The following fixes the issue:
rm /var/lib/jetty/webapps/solr
ln -s /usr/share/solr/web/ /var/lib/jetty/webapps/solr
--
You received this bug notification because you are a member of
Likewise, I can confirm this latest package fixes the issue for me on
various XenServer DomU instances running Precise 12.04.1 LTS 64 bit with
Hosts/Dom0 on dual AMD 6238 cpus.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Thanks Scott, do you have any idea on a rough ETA (and also when we
could expect this new version to make it into the main repositories?)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/956051
Title:
Nearly a month on multiple XenServer VMs running 12.04.1 and no problems at all.
Can I presume the update hasn't made it into today's libc6 security updates?
Thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
4 days running on several servers with no issues at all, all oneirc -
precise guest OS upgrades using the proposed repository, on XenServer
6.0.2 with AMD cpus (dual Opteron 12 core 6238) on the hosts.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I can confirm that after adding proposed to a 11.10 install, then apt-get
update and do-release-upgrade'ing it to 12.04 the install now works and so far
so good!
Hopefully it'll get into main and the netinstall soon!
Thanks for the work Adam.
--
You received this bug notification because you
Thanks for the support guys, but the deadline for the freeze on 12.04.1 LTS has
been and gone.
Adam: Would it be at least possible to push the update out now even though it
won't make it into the installation media, so that we can at least upgrade or
use the net-install image?
Thanks,
Tom.
--
an urgent issue for Xen/XenServer/XCP users meaning that the LTS
edition can't be used on a very large range of servers and virtual machines
either by installing it directly or by upgrading.
Thanks very much.
Regards,
Tom Worley
--
You received this bug notification because you are a member
Unfortunately this is still affecting me, and I can't get Ubuntu 12.04 LTS
server installed on fully patched XenServer 6.0.2
I tried to get around it by installing Ubuntu 10.04.4 LTS and upgrading to
10.10-11.04-11.10 (all fine) and then the upgrade from 11.10-12.04 failed
with the Python
This may be an issue with AMD cpus, I've seen a similar problem with eglibc:
bug 956051
I can confirm that using the Ubuntu 12.04 LTS 64bit minimal CD to do a net
install, it gets past the initial cdrom problem, but then comes up with the
dpkg error:
Warning: Failure trying to run: chroot
This bug also affects the ubuntu install on our dual AMD 6238 cpus while
running XenServer 6.0.201 and also Xen Cloud Platform 1.5
The installer shows:
Warning: Failure trying to run: chroot /target dpkg --force-depends --install
/var/cache/apt/archives/debconf_1.5.42ubuntu1_all.deb
In the log
I am also affected by this bug (dual Opteron 12 core 6238), but when starting
/etc/init.d/xcp-xapi
Fresh install of Ubuntu 12.04
About to try the cpuid_mask_ext_ecx fix.
Adam: I'll test the backport if you need?
# /etc/init.d/xcp-xapi start
Error: Connection refused (calling connect )
syslog:
Running Kubuntu Lucid 10.04, NVidia GTX 260 graphics card, dual monitors.
I've been having this issue on and off for months, and usually rebooting lets
me log in, but it's stuck on the splash screen and rebooting/powering off has
not fixed it (6 times in a row).
Xorg.0.log shows:
Fatal server
Just to add to the above, I'm running:
kdm: 4:4.4.2-0ubuntu14
xserver-xorg: 1:7.5+5ubuntu1 (but Xorg.0.log shows: X.Org X Server 1.7.6)
uname -a shows:
Linux Beast 2.6.32-24-generic #38-Ubuntu SMP Mon Jul 5 09:20:59 UTC 2010 x86_64
GNU/Linux
The sleep 1 workaround to /etc/init/kdm.conf didn't
Thanks Michael,
I can confirm on an identical setup, bare metal virtual server image, upgrading
from karmic to lucid, do-release-upgrade -d worked perfectly this time.
Tom.
--
Upgrade from karmic to lucid failes with Internal Error, Could not perform
immediate configuration (2) on mountall
Public bug reported:
Binary package hint: apt
Running Lucid beta.
php5-ffmpeg Version: 0.6.0-1build3
Expected to apt-get install php5-ffmpeg.
What happened:
It tried to install apache2 when php5-cgi and nginx are installed.
When installing php5-ffmpeg the module requires the package php5,
Added /var/log/dist-upgrade/system_state.tar.gz from an affected system
as per request of mvo from #ubuntu+1 =)
** Attachment added: system_state.tar.gz
http://launchpadlibrarian.net/44273097/system_state.tar.gz
--
Upgrade from karmic to lucid failes with Internal Error, Could not perform
Likewise, this affects me too, karmic-lucid beta on a virtual machine,
/etc/fstab:
proc/proc procdefaults0 0
/dev/xvda / ext3noatime,errors=remount-ro 0 1
/dev/xvdb noneswapsw 0 0
#
I've also upgraded 3 desktops with the update manager to lucid beta with no
problems.
I have tried downgrading to the mountall karmic 1.0 package with: sudo apt-get
install mountall=1.0 and it downgraded fine, however I still get the same error
from do-release-upgrade -d
--
Upgrade from
I'm considering replacing karmic with lucid in /etc/apt/sources.list and
then apt-get dist-upgrade
Is there any more than that that do-release-upgrade actually does?
--
Upgrade from karmic to lucid failes with Internal Error, Could not perform
immediate configuration (2) on mountall
I've managed to around this by doing the following:
sudo sed -i 's/karmic/lucid/g' /etc/apt/sources.list
sudo apt-get update
wget
http://mirrors.kernel.org/ubuntu/pool/main/m/mountall/mountall_2.11_amd64.deb
sudo dpkg --force-all -i /var/cache/apt/archives/mountall_2.11_amd64.deb
sudo apt-get -f
The above workaround was on a linode virtual server and worked first time.
There's a slight amendment to the above instructions, the dpkg line should read:
sudo dpkg --force-all -i mountall_2.11_amd64.deb
I used the local copy that I got dist-upgrade to download while doing
testing
--
Upgrade
This bug also seems to affect 9.10 Karmic.
I can start maradns by hand without any issue, but when I reboot it doesn't
come back up.
I've temporarily hacked this by adding this to /etc/rc.local:
service maradns restart
Far from a fix =(
--
maradns init script silently fails during the boot,
I can confirm this bug still exists in mysql-server-5.1 (5.1.30-2ubuntu3), from
an upgrade of Intrepid to Jaunty, then installing 5.1.
This breaks the upgrade, however, commenting out skip-bdb fix works and apt
continues the upgrade
--
mysql-server-5.1 5.1.30-2ubuntu3 fails to install/upgrade
I can confirm this bug still exists in mysql-server-5.1 (5.1.30-2ubuntu3), from
an upgrade of Intrepid to Jaunty, then installing 5.1.
This breaks the upgrade, however, commenting out skip-bdb fix works and apt
continues the upgrade
--
mysql-server-5.1 5.1.30-2ubuntu3 fails to install/upgrade
Public bug reported:
Binary package hint: update-notifier
Ubuntu version: 9.04 Jaunty Alpha 3 (upgraded from intrepid)
Update-notifier package version: 0.75.6
After upgrading to 9.04 Jaunty Alpha from Intrepid, and having already
rebooted, then having done more updates only a few minutes
Agreed, this has affected a large amount of people, just look at the amount of
duplicate bug reports!
I've had this issue since August and it's still a problem.
As a hack around I've had to disable auto-eth0 and setup another interface with
a static ip, but I have to log in to get it applied, so
I too can confirm this bug after trying to add an AAC from nero with
x264 video
from command line:
MP4Box -inter 500 -add file.aac -add file.264 file.mp4 -fps 29.9699
*** buffer overflow detected ***: MP4Box terminated
=== Backtrace: =
/lib/libc.so.6(__fortify_fail+0x4b)[0xb7c91fdb]
** Attachment added: CoreDump.gz
http://launchpadlibrarian.net/18825812/CoreDump.gz
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/18825813/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/18825814/ProcMaps.txt
** Attachment added:
** Attachment added: CoreDump.gz
http://launchpadlibrarian.net/18825812/CoreDump.gz
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/18825813/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/18825814/ProcMaps.txt
** Attachment added:
Public bug reported:
Binary package hint: grub
Ubuntu 8.10 Intrepid.
Grub: 0.97-29ubuntu45
For some time now, grub says that it will boot in 10 seconds on the current
option, however, the countdown doesn't move (even without touching the
keyboard).
It stays on 10 seconds, does not boot after
My phpMyVersion php cli cron scripts seem to be working fine on
php5-5.2.6-2ubuntu4 so far.
--
php5 crashed with SIGSEGV in _Unwind_ForcedUnwind()
https://bugs.launchpad.net/bugs/259479
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Had this happen a few more times recently, doesn't appear to be fixed
yet. Anyone have any ideas?
--
php5 crashed with SIGSEGV in _Unwind_ForcedUnwind()
https://bugs.launchpad.net/bugs/259479
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed
Just to add, also happened while running my own php scripts via cron
--
php5 crashed with SIGSEGV in _Unwind_ForcedUnwind()
https://bugs.launchpad.net/bugs/259479
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to php5 in ubuntu.
--
Had this happen a few more times recently, doesn't appear to be fixed
yet. Anyone have any ideas?
--
php5 crashed with SIGSEGV in _Unwind_ForcedUnwind()
https://bugs.launchpad.net/bugs/259479
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Just to add, also happened while running my own php scripts via cron
--
php5 crashed with SIGSEGV in _Unwind_ForcedUnwind()
https://bugs.launchpad.net/bugs/259479
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
** Changed in: network-manager (Ubuntu)
Status: New = Confirmed
--
wired connection settings are lost after reboot
https://bugs.launchpad.net/bugs/259214
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
I can confirm the same problem, having just upgraded from hardy with static ip
in /etc/network/interfaces, eth0 connects via dhcp and ignores the static
settings.
Changing the setting through the network manager to a manual address appears to
work for a short while, but then reverts to dhcp,
I've had exactly the same problem, however just found the solution:
In the Gusty Tribe 5 live installer, open a terminal:
$ sudo su
# rmmod forcedeth
# modprobe forcedeth msi=0 msix=0
# /etc/init.d/networking restart
Your network interfaces should come back up and actually work now :-)
--
62 matches
Mail list logo