So in that case the only possible culprits are the charon config file
and the System76 stuff (since presumably it won't actually affect a non-
System76 machine). I can poke around with System76 and see if they know
anything, and we should be able to try a run with the charon config put
back to
I am almost certain that the lvm2 messages happen in the couple of
minutes before the box crashes/reboots itself. The fact that they
happen over several minutes is part of what makes me think that it's
coincidental and just something that's unhappy because we're in the
middle of installing stuff
Neither system had LVM configured at all, which is why I thought it
might be coincidental, but I wanted to include it anyway.
I did have to manually deal with our custom edits to /etc/ssh/ssh_config
and /etc/strongswan.d/charon.conf and System76's custom edits to
/etc/default/grub in order to
Honestly, if this were one system I'd be of the opinion that I recovered
it and it's fine. What's concerning me is that we've seen it on three
systems now and we have a bunch more that need to be upgraded.
The only thing I can think of if it's not reproducible outside our
office is that it's
I haven't found any crash files in /var/crash on either system that I
looked at in detail. It actually sort of acts like a normal 'install
for a while, then reboot', it just comes back up in a half-installed
state after that first reboot, which is why I think it crashed rather
than normally
Public bug reported:
I've now had three systems we've tried to upgrade from 16.04 to 18.04.1
which crashed during the upgrade and had to be recovered with dpkg
--configure -a. I was able to recover two of them with a bit of manual
care, but I am now hesitant to upgrade other machines until we
Public bug reported:
[Extensa 5635Z, Conexant CX20561 (Hermosa), Speaker, Internal] No sound
at all
ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: alsa-base 1.0.25+dfsg-0ubuntu3
ProcVersionSignature: Ubuntu 3.5.0-19.30-generic 3.5.7
Uname: Linux 3.5.0-19-generic i686
NonfreeKernelModules:
, and let you know then if the problem is resolved or not.
Rev Deborah J Lipsitz
Sent from my BlackBerry® device on the Simple Mobile network
-Original Message-
From: Gary Lasker gary.las...@canonical.com
Sender: boun...@canonical.com
Date: Tue, 18 Sep 2012 05:34:40
To: challenge
Public bug reported:
While attempting to review an installed utility called System Load
Indicator v 0.3-0, the following error occurred...
Failed to submit review
Server response was:
:package indicator-multiload not in lp-ppa-indicator-multiload-stable-daily
precise for precise
This error
No, that one is different, sorry about that, I thought it was related
to what we encountered with Ubuntu 12.04 LTS. That error wasn't
consistent, and effected whether or not packages actually installed or
were removed successfully (errors generated no matter what when using
USC). We simply
I run Ubuntu Studio 12.04 on one physical drive, Ubuntu 12.04 LTS on
another, on a Dell Studio 1737 with all the bells and whistle available
in 2009. Both are AMD64. USC works just fine within Studio, but
reports package failed to install every time in LTS. About 15% of
packages actually do
Bug apparently effects Ubuntu Studio 12.04 as well. It will either
refuse a review/edit claiming problem with communicating with servers,
or will accept review/edit, still generate an error. The latter problem
will either post the review/edit and generate an error, followed by a
message about
Public bug reported:
Upgraded to Ubuntu 11-10 and now there is no sound. I am very very new
and very very confused by Linux but my friends all asure me that this is
the ONLY way to go so please be very basic with the answer. Thanks.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package:
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/941762
Title:
[E-6500D, SigmaTel STAC9221 A1, Green Speaker, Rear] Pulseaudio fails
to detect card
To manage notifications about this bug go to:
I confirm this bug, including that manually changing permissions on the
script forces Brltty-Setup to appear to work. It finishes
successfully, launches Brltty with the newly-established configuration
and Brltty works until reboot. To the user it simply appears that
brltty.conf is now depricated
Public bug reported:
Binary package hint: gnome-utils
I noticed this first a few days ago. Once when I waited long enough I
got a connection timed out message, but I haven't been able to replicate
that.
I'm running Ubuntu 8.04.
The package is gnome-utils 2.20.0.1-1ubuntu5
I expected when I
--
get blank page whenever I try to look a word up with dictionary lookup
https://bugs.launchpad.net/bugs/665613
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Changed in: linux (Ubuntu)
Status: Fix Released = In Progress
--
Please include RaLink RT2860 driver
https://bugs.launchpad.net/bugs/210725
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Same bug is affecting me also, here is the number sequence it gave me
:eeaade90-1821-40e9-863a-8313c35b7031. How do i fix this, I'm not a
computer expert..
--
Grub 2 problem, error: no such device
https://bugs.launchpad.net/bugs/403408
You received this bug notification because you are a member
** Changed in: linux (Ubuntu)
Status: Fix Released = Fix Committed
** Changed in: linux (Ubuntu Jaunty)
Status: Fix Released = Fix Committed
** Changed in: linux (Ubuntu)
Status: Fix Committed = In Progress
** Changed in: linux (Ubuntu Jaunty)
Status: Fix Committed =
I was on Hardy Heron AMD64, and didn't have this problem. Then I
upgraded to Intrepid Ibex AMD64, and had different issues which resulted
in my installing Hardy Heron AMD64 in a separate partition. (And
because of those other issues Hardy is my default system.) I don't have
this problem when I
Public bug reported:
Binary package hint: serpentine
I have previously used Serpentine to burn a cd from music I have on my
computer. I had ripped a new cd so it was on my computer and wanted to
burn a copy to use in my car. I placed the blank cd in the dvd/cd burner
as I'd done before. It
** Attachment added: CoreDump.gz
http://launchpadlibrarian.net/21099405/CoreDump.gz
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/21099406/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/21099407/ProcMaps.txt
** Attachment added:
Thank you so much, I now know that I am not alone in this problem.
Deborah
Date: Thu, 8 Jan 2009 13:38:51 +
From: michelangelo_ai...@yahoo.com
To: alarollt...@hotmail.com
Subject: [Bug 199917] Re: getting not on server list when trying to add a
buddy how do i fix
This bug
I sign on to Yahoo first, my MSN account always seem to work better than the
other ones.
Deborah
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Sat, 6 Dec 2008 12:06:09 +
Subject: [Bug 305182] Re: Everytime I sign on, my IM will not enable, takes a
long time to do so, hours
Public bug reported:
Binary package hint: pidgin
Every single time I log on, my IM WILL NOT enable any of my email
accounts. How do I get it to open each time I sign on?
ProblemType: Bug
Architecture: i386
Date: Thu Dec 4 09:15:22 2008
DistroRelease: Ubuntu 8.04
ExecutablePath:
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/20205050/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/20205051/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/20205052/ProcStatus.txt
--
Everytime I
27 matches
Mail list logo
