[Bug 1401390] Re: apt-get install nvidia-331 triggers 691 packages to be installed
I am also getting identical output as Miguel Prada on 14.04 LTS -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1401390 Title: apt-get install nvidia-331 triggers 691 packages to be installed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hwloc/+bug/1401390/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1296694] Re: No OSD when adjusting brightness and volume
my setup is the same as the original post, with the possible variation that I use a classic session. I think notifications were working right after install, but stopped after I did a mega installation of updates and extra software. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1296694 Title: No OSD when adjusting brightness and volume To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/notification-daemon/+bug/1296694/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242891] Re: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
Hi, since the update on the 23rd, my sound has broken. I now only have dummy output listed in the sound settings dialog. The DKMS process used to install several modules, but as of the update on 23rd December it only installs 2 as follows: snd-hda-codec: Running module version sanity check. - Original module - Installation - Installing to /lib/modules/3.8.0-34-generic/updates/dkms/ snd-hda-intel.ko: Running module version sanity check. - Original module - Installation - Installing to /lib/modules/3.8.0-34-generic/updates/dkms/ I have a lot of errors in dmesg, relating to hda-audio which I will post shortly. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242891 Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242891] Re: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
[ 22.419898] snd_hda_intel :00:1b.0: irq 48 for MSI/MSI-X [ 22.528430] snd_hda_codec_idt: disagrees about version of symbol snd_hda_add_new_ctls [ 22.528433] snd_hda_codec_idt: Unknown symbol snd_hda_add_new_ctls (err -22) [ 22.528438] snd_hda_codec_idt: disagrees about version of symbol snd_hda_get_connections [ 22.528439] snd_hda_codec_idt: Unknown symbol snd_hda_get_connections (err -22) [ 22.528443] snd_hda_codec_idt: disagrees about version of symbol snd_hda_codec_read [ 22.528444] snd_hda_codec_idt: Unknown symbol snd_hda_codec_read (err -22) [ 22.528448] snd_hda_codec_idt: disagrees about version of symbol snd_hda_set_vmaster_tlv [ 22.528449] snd_hda_codec_idt: Unknown symbol snd_hda_set_vmaster_tlv (err -22) [ 22.528453] snd_hda_codec_idt: disagrees about version of symbol hda_get_autocfg_input_label [ 22.528454] snd_hda_codec_idt: Unknown symbol hda_get_autocfg_input_label (err -22) [ 22.528458] snd_hda_codec_idt: disagrees about version of symbol query_amp_caps [ 22.528459] snd_hda_codec_idt: Unknown symbol query_amp_caps (err -22) [ 22.528463] snd_hda_codec_idt: disagrees about version of symbol snd_hda_delete_codec_preset [ 22.528464] snd_hda_codec_idt: Unknown symbol snd_hda_delete_codec_preset (err -22) [ 22.528471] snd_hda_codec_idt: disagrees about version of symbol snd_hda_power_save [ 22.528472] snd_hda_codec_idt: Unknown symbol snd_hda_power_save (err -22) [ 22.528475] snd_hda_codec_idt: disagrees about version of symbol snd_hda_codec_resume_cache [ 22.528476] snd_hda_codec_idt: Unknown symbol snd_hda_codec_resume_cache (err -22) [ 22.528480] snd_hda_codec_idt: disagrees about version of symbol snd_hda_codec_setup_stream [ 22.528481] snd_hda_codec_idt: Unknown symbol snd_hda_codec_setup_stream (err -22) [ 22.528488] snd_hda_codec_idt: disagrees about version of symbol snd_hda_codec_get_pincfg [ 22.528489] snd_hda_codec_idt: Unknown symbol snd_hda_codec_get_pincfg (err -22) [ 22.528495] snd_hda_codec_idt: disagrees about version of symbol snd_hda_multi_out_dig_open [ 22.528496] snd_hda_codec_idt: Unknown symbol snd_hda_multi_out_dig_open (err -22) [ 22.528499] snd_hda_codec_idt: disagrees about version of symbol snd_hda_add_vmaster_hook [ 22.528500] snd_hda_codec_idt: Unknown symbol snd_hda_add_vmaster_hook (err -22) [ 22.528504] snd_hda_codec_idt: disagrees about version of symbol snd_hda_codec_resume_amp [ 22.528505] snd_hda_codec_idt: Unknown symbol snd_hda_codec_resume_amp (err -22) [ 22.528509] snd_hda_codec_idt: disagrees about version of symbol snd_hda_detach_beep_device [ 22.528510] snd_hda_codec_idt: Unknown symbol snd_hda_detach_beep_device (err -22) [ 22.528513] snd_hda_codec_idt: disagrees about version of symbol snd_hda_enable_beep_device [ 22.528514] snd_hda_codec_idt: Unknown symbol snd_hda_enable_beep_device (err -22) [ 22.528518] snd_hda_codec_idt: disagrees about version of symbol __snd_hda_codec_cleanup_stream [ 22.528519] snd_hda_codec_idt: Unknown symbol __snd_hda_codec_cleanup_stream (err -22) [ 22.528523] snd_hda_codec_idt: disagrees about version of symbol snd_hda_check_board_config [ 22.528524] snd_hda_codec_idt: Unknown symbol snd_hda_check_board_config (err -22) [ 22.528528] snd_hda_codec_idt: disagrees about version of symbol snd_hda_multi_out_dig_cleanup [ 22.528529] snd_hda_codec_idt: Unknown symbol snd_hda_multi_out_dig_cleanup (err -22) [ 22.528533] snd_hda_codec_idt: disagrees about version of symbol snd_hda_get_pin_label [ 22.528534] snd_hda_codec_idt: Unknown symbol snd_hda_get_pin_label (err -22) [ 22.528550] snd_hda_codec_idt: disagrees about version of symbol snd_hda_codec_write_cache [ 22.528551] snd_hda_codec_idt: Unknown symbol snd_hda_codec_write_cache (err -22) [ 22.528557] snd_hda_codec_idt: disagrees about version of symbol snd_hda_create_dig_out_ctls [ 22.528558] snd_hda_codec_idt: Unknown symbol snd_hda_create_dig_out_ctls (err -22) [ 22.528561] snd_hda_codec_idt: disagrees about version of symbol snd_hda_multi_out_dig_close [ 22.528562] snd_hda_codec_idt: Unknown symbol snd_hda_multi_out_dig_close (err -22) [ 22.528565] snd_hda_codec_idt: disagrees about version of symbol snd_hda_get_conn_index [ 22.528566] snd_hda_codec_idt: Unknown symbol snd_hda_get_conn_index (err -22) [ 22.528569] snd_hda_codec_idt: disagrees about version of symbol snd_hda_multi_out_analog_open [ 22.528570] snd_hda_codec_idt: Unknown symbol snd_hda_multi_out_analog_open (err -22) [ 22.528573] snd_hda_codec_idt: disagrees about version of symbol snd_hda_ctl_add [ 22.528574] snd_hda_codec_idt: Unknown symbol snd_hda_ctl_add (err -22) [ 22.528577] snd_hda_codec_idt: disagrees about version of symbol snd_hda_get_bool_hint [ 22.528578] snd_hda_codec_idt: Unknown symbol snd_hda_get_bool_hint (err -22) [ 22.528581] snd_hda_codec_idt: disagrees about version of symbol snd_hda_create_spdif_share_sw [ 22.528582]
[Bug 1242891] Re: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
I dont understand the disagrees about version of symbol error considering everything matches: Running module version sanity check. - Original module - Installation - Installing to /lib/modules/3.8.0-34-generic/updates/dkms/ luke@orion:~$ dkms status bbswitch, 0.8, 3.8.0-34-generic, x86_64: installed nvidia-304, 304.116, 3.8.0-34-generic, x86_64: installed oem-audio-hda-daily, 0.201312231505~ubuntu13.04.1, 3.8.0-34-generic, x86_64: installed vhba, 20130607, 3.8.0-34-generic, x86_64: installed luke@orion:~$ uname -r 3.8.0-34-generic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242891 Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242891] Re: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
I was able to downgrade to the previous package: https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa- daily/+build/5361699/+files/oem-audio-hda-daily-lts-raring- dkms_0.201312181238%7Eubuntu12.04.1_all.deb Which has put everything back as it was. I am also led to believe from this thread: https://answers.launchpad.net/ubuntu/+source/alsa- driver/+question/241165 that if i change to 3.10 kernel then the update from 23rd december would work, which makes me think that I should stick to the previous version for Raring. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242891 Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242891] Re: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
hi no problem, I have done this. IO[0].data toggles the mute LED on/off. when On it is always orange (for muted). when i uncheck the box for IO[0].data, the led is off. I cannot find a combination of settings to make it go white (for unmute), but I will try again tonight when I get back from work. if i toggle IO[0].enable or IO[0].dir, these also switch the orange LED on/off. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242891 Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242891] Re: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
** Patch added: alsa-info.diff https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+attachment/3887839/+files/alsa-info.diff -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242891 Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242891] Re: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
Hi, I booted into the instal DVD, and issued sudo modprobe snd-hda- intel to get the alsa-info for the old situation, because I couldn't figure out how to get back there on my current installation. I hope this helps. alsa-info.txt is current setup. alsa-info.old is livecd setup. alsa-info.diff is the difference file as requested (obviously). ** Attachment added: alsa-info.txt https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+attachment/3887837/+files/alsa-info.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242891 Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242891] Re: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
** Attachment added: alsa-info.txt.old https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+attachment/3887838/+files/alsa-info.txt.old -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242891 Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242891] [NEW] [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem
Public bug reported: Possibly important: using raring 13.04. issue seen on hp DV6 7000 series laptop which had beats audio (4 channels i think. it has a subwoofer. info from hp is very unclear). I am using the alsa daily package: oem-audio-hda-daily-dkms which builds a new snd-hda-intel kernel module every so often. with the snd-hda-intel kernel module provided by the normal raring ubuntu repo, the mute/sound led works correctly, but the channels that the hardware has are not correctly detected, and headphones do not work/mute speakers. My laptop has multiple speaker channels, and sub/LFE. With the normal raring kernel module, there is no way to use all channels even with hda-jack-retask, and sadly sound only comes from the weakest of the 4 channels so is very disappointing. I have the alsa daily package ppa of oem-audio-hda-daily-dkms set in my software sources, so I whenever they release a new build I install it automatically. With the package from this PPA there are more channels seen in alsamixer, although i still need to use hda-jack-retask to get sound from them all. Crucially, the headphones jack works with the module built from this PPA, and automutes the speakers when headphones are plugged in. I raise this bug because non-technical users would not have been able to get acceptable sound from this laptop using ubuntu, which is an undesirable situation. however, the led now always indicates red for muted when it should be white for unmuted. pressing the mute button toggles the mute function correctly in pulse/gnome, but the LED always indicates muted. Essentially, the snd-hda-intel module from this PPA is usable with a technical modification, but the led indicator does not function correctly, although it did before. please let me know if more information is needed, or if you need my to perform any tests. kind regards ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-32.47-generic 3.8.13.10 Uname: Linux 3.8.0-32-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luke 2367 F pulseaudio Date: Mon Oct 21 21:31:28 2013 InstallationDate: Installed on 2013-10-01 (20 days ago) InstallationMedia: Ubuntu-GNOME 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_PulsePlaybackTest: PulseAudio playback test successful Symptom_Type: Only some of outputs are working Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/22/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.27 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 181B dmi.board.vendor: Hewlett-Packard dmi.board.version: 52.24 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.27:bd04/22/2013:svnHewlett-Packard:pnHPENVYdv6NotebookPC:pvr088A1230591620100:rvnHewlett-Packard:rn181B:rvr52.24:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP ENVY dv6 Notebook PC dmi.product.version: 088A1230591620100 dmi.sys.vendor: Hewlett-Packard ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug gnome3-ppa raring third-party-packages -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242891 Title: [HDA-Intel - HDA Intel PCH, playback] Playback problem LED problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1242891/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 810670] Re: ansm tray icon is just a vertical line
hi I have added the aMsn daily PPA at https://launchpad.net/~amsn- daily/+archive/ppa to my software sources, which caused my amsn version to be upgraded to 0.98.4. This has not affected the bug. the issue may be the toolkit. I dont want to upgrade my distribution as i stick to LTS releases, so i looks like I'll just have to continue to put up with it for now. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/810670 Title: ansm tray icon is just a vertical line To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/amsn/+bug/810670/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 810670] Re: ansm tray icon is just a vertical line
hi LocutusOfBorg , I dont know exactly how to do this. is there a way to do this without destroying my installation? how do i revert back if this doesnt work? thanks, ex-oficio -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/810670 Title: ansm tray icon is just a vertical line To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/amsn/+bug/810670/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 810670] [NEW] ansm tray icon is just a vertical line
Public bug reported: When amsn runs, the main tray icon is sometimes a vertical line one pixel wide. Because of its colour, i can only see it if i make the panel bar transparent. It happens irrespective of whether the panel is transparent when amsn is started. This happens occasionally to the main amsn icon, but the amsn mail notification icon is almost always just a thin vertical line one pixel wide. amsn or hotmail still appears if i carefully click the thin line. at first i couldn't figure out what was wrong with my settings, but after making the panel transparent i can see the vertical line that signifies amsn icons should be there. it is as if the icons have been compressed to one pixel. This has been happening to me on jaunty, intrepid and lucid. i have not tried maverick or natty yet. I thought this could be related to the fact that i hadn't done a fresh install since jaunty, only upgraded. however, i did a clean install (for other reasons), which is what i'm using now, and the problem is the same as ever. i have also tried using metacity instead of the default compiz, but this has no effect on the problem. occurrence of this bug is seemingly random, but more often than not. lsb_release -rd: Description:Ubuntu 10.04.2 LTS Release:10.04 i will be glad to provide any further pertinent information, or try any reasonable experiments to help solve this. no other IM application available on ubuntu provides the level of msn functionality as amsn, so an alternative application has never seemed an option. kind regards, ex-oficio ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: amsn 0.98.3-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16 Uname: Linux 2.6.32-32-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Thu Jul 14 19:20:20 2011 InstallationMedia: Ubuntu 10.04.2 LTS Lucid Lynx - Release amd64 (20110211.1) ProcEnviron: LANGUAGE=en_GB:en LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: amsn ** Affects: amsn (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/810670 Title: ansm tray icon is just a vertical line To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/amsn/+bug/810670/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 810670] Re: ansm tray icon is just a vertical line
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/810670 Title: ansm tray icon is just a vertical line To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/amsn/+bug/810670/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 810670] Re: ansm tray icon is just a vertical line
** Attachment added: screenshot of my panel demonstrating the bug. in this case both amsn icon and amsn email icon are just thin lines https://bugs.launchpad.net/ubuntu/+source/amsn/+bug/810670/+attachment/2208298/+files/Screenshot.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/810670 Title: ansm tray icon is just a vertical line To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/amsn/+bug/810670/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 778407] Re: Sometimes when you open the solution file disappear GNOME panel, and all icons from my desktop
this affects me as well. every time i open monodevelop, the panels disappear, sometimes straight away, sometimes when i close monodevelop. monodevelop seems to cast an edge shadow over the panels in a way that other windows dont, maybe this is related. also possibly related is the fact that my panels are set to be slightly transparent, which i don't want to give up. i would be interested to know if the original poster has transparent panels? the panels are still there, but invisible. i can still open the menu and open the terminal. i type killall gnome-panel and the panels restart, and it's back to normal. im using 10.04 lucid, with metacity not compiz. however, i have checked the compositing manager box in the metacity settings in gconf-editor so that i get true transparency in my terminal which also matters to me. hopefully some or all of this is useful. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/778407 Title: Sometimes when you open the solution file disappear GNOME panel, and all icons from my desktop To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/monodevelop/+bug/778407/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 504042] Re: invest applet MACD is incorrectly displayed
lately the charts do not open in invest applet. i cant remember where i found this now, but I can report that you can get the invest applet to display a chart by editing /usr/share/pyshared/invest/chart.py and changing line 209 to remove europe from the base chart url: i commented out the original and replaced it with the changed line, as in this snippet: #chart_base_url = http://ichart.europe.yahoo.com/z?s=%(s)st=%(t)sq=%(q)sl=%(l)sz=%(z)sp=%(p)sa=%(a)s%(opt)s chart_base_url = http://ichart.yahoo.com/z?s=%(s)st=%(t)sq=%(q)sl=%(l)sz=%(z)sp=%(p)sa=%(a)s%(opt)s the graph doesnt look like the old one. apart from the fact that it wont show trade volume, its a better graph, especially the MACD. sorry i couldn't find the bug for graphs not showing. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/504042 Title: invest applet MACD is incorrectly displayed To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-applets/+bug/504042/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 504042] Re: invest applet MACD is incorrectly displayed
hi, apologies for forgetting about this. i have just had a play trying to see what is available. as suspected, it seems its not possible to influence how the macd is displayed on a particular server. the ichart.finance.yahoo.com server seems to be the better option though. even though it doesn't look as visually appealing, the signal line is visible, and where it cuts the macd columns it does sort of create a MACD histogram of sorts. this one at least does provide the information one would need if they were trying to see the macd. to re-use that example you gave, the chart below demonstrates this: http://ichart.finance.yahoo.com/z?s=JMC.Lt=6mq=ll=offz=lp=m20,e5,e20,b,v,a=f14,w14,m26-12-9,ss some people might not like the look of this graph though. i would suggest the best thing would be to allow the server to be chosen from a combobox in the preferences. what language is this written in? i may have time to do this over the next few weeks. regards, ex-oficio -- invest applet MACD is incorrectly displayed https://bugs.launchpad.net/bugs/504042 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 44082] Re: GNOME Panel icons (on right side) move apparently randomly on session start in some situations
this bug has become worse for me since upgrading to lucid. i had the problem with previous versions of ubuntu but after resetting the positions a few times gnome seemed to learn. The problem is not related to rebooting or restarting x or anything like that. the problem is that at home i connect a big lcd monitor to my laptop via a vga cable, and when away obviously i just use the laptop screen. on changing from one to the other the applets are all in the wrong order, or floating in space. im using the proprietary Nvidia driver, although in my opinion the problem is not related to that. i see the fix as being achieved by having the actual order of the applets saved, not just the positions. any space should be saved, as well as noting when applets are touching, or when an applet touches the end of the panel. when applets are touching each other or the edge they will remain stuck together or to the edge, with the space being dynamically altered. floating applets would be a special case, and are detected by noting that nothing is stuck to either side except space. i realise this is probably far from the logic currently used to determine the locations, but i would point out that what i have suggested is very similar to the way the window controls are positioned on any gnome window. to see the way this is set up open gconf-editor and go to Apps - Metacity - General and choose the key named button_layout. by the way, if like me you hate the new lucid window control layout see this link: http://hubpages.com/hub/Move-Window-Controls-back-to-right-in- Ubuntu-1004 kind regards -- GNOME Panel icons (on right side) move apparently randomly on session start in some situations https://bugs.launchpad.net/bugs/44082 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 449762] Re: No sound with intel-hda without alsa force-reload
i would just like to extend my sincere thanks to everone here. this bug has been DRIVING ME UP THE WALL for months since i upgraded to karmic. i never thought it would be the modem, but disabling it has fixed the problem. based on post #41 can i assume that in lucid it will work even with the modem driver enabled? big thanks to all. -- No sound with intel-hda without alsa force-reload https://bugs.launchpad.net/bugs/449762 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 418627] Re: [Regression] 0x1025007f needs model=will quirk
RE my post on the 31st of october ( #84 ) and my problems with sound. i have found the solution and it was the sl-modem proprietary driver: https://bugs.launchpad.net/ubuntu/+source/sl-modem/+bug/449762 disabling it (in the hardware drivers tool in the administration menu) and restoring my pulesaudio configuration files to their original state overcame the problem. its interesting that nusret's post from the 28th of october also worked, although requiring manual edits to files. just posting here in case anyone else has experienced this problem. -- [Regression] 0x1025007f needs model=will quirk https://bugs.launchpad.net/bugs/418627 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
RE: [Bug 504042] Re: invest applet MACD is incorrectly displayed
Enrico, Thanks for the response. i knew the data came from yahoo, but i didnt realise the charts were generated by yahoo directly. It's an odd way to show the macd data, and ive never seen it before. its not very easy to read it. I will see if i can generate the MACD in the conventional manner directly at the yahoo site, and let you know if so. i couldnt do it when i tried a few moments ago, but i dont have much time now, and will try again later. again, thanks for your response, regards, ex-oficio. Date: Wed, 27 Jan 2010 17:36:29 + From: enrico-min...@gmx.de To: luke.i.wilkin...@live.co.uk Subject: [Bug 504042] Re: invest applet MACD is incorrectly displayed Please give feedback at the gnome bugzilla. There are some comments on this bug report. https://bugzilla.gnome.org/show_bug.cgi?id=606339 -- invest applet MACD is incorrectly displayed https://bugs.launchpad.net/bugs/504042 You received this bug notification because you are a direct subscriber of the bug. Status in The Gnome Panel Applets: Unknown Status in “gnome-applets” package in Ubuntu: Triaged Bug description: Binary package hint: gnome-applets using Ubuntu 9.10 karmic gnome-applets: Installed: 2.28.0-0ubuntu2 currently, the MACD indicator is displayed as two histograms, one for the MACD and one for the signal line. this is incorrect. the MACD graph should be presented as two lines for the MACD and signal, and optionally, a histogram to show the difference between the two. the wikipedia page here shows what i mean: http://en.wikipedia.org/wiki/MACD It took me a while to work out what was going on with the macd on this applet, and currently the information which this indicator is supposed to convey is often hard to read. i really like this applet and find it much more convenient that anything else available, but this is letting it down IMHO. best regards, ex-oficio To unsubscribe from this bug, go to: https://bugs.launchpad.net/gnome-applets/+bug/504042/+subscribe _ Got a cool Hotmail story? Tell us now http://clk.atdmt.com/UKM/go/195013117/direct/01/ -- invest applet MACD is incorrectly displayed https://bugs.launchpad.net/bugs/504042 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 195666] Re: Allow pressing escape to see boot messages
you might need to try terminal 1 or 8, messages go to both terminals now ctrl+alt+f1 ctrl+alt+f8 ctrl+alt+f7 to return to the terminal running X. the following command may show you the info you want to see: dmesg | less sorry if this isn't helpful regards -- Allow pressing escape to see boot messages https://bugs.launchpad.net/bugs/195666 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 504042] [NEW] invest applet MACD is incorrectly displayed
Public bug reported: Binary package hint: gnome-applets using Ubuntu 9.10 karmic gnome-applets: Installed: 2.28.0-0ubuntu2 currently, the MACD indicator is displayed as two histograms, one for the MACD and one for the signal line. this is incorrect. the MACD graph should be presented as two lines for the MACD and signal, and optionally, a histogram to show the difference between the two. the wikipedia page here shows what i mean: http://en.wikipedia.org/wiki/MACD It took me a while to work out what was going on with the macd on this applet, and currently the information which this indicator is supposed to convey is often hard to read. i really like this applet and find it much more convenient that anything else available, but this is letting it down IMHO. best regards, ex-oficio ** Affects: gnome-applets (Ubuntu) Importance: Undecided Status: New -- invest applet MACD is incorrectly displayed https://bugs.launchpad.net/bugs/504042 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 504042] Re: invest applet MACD is incorrectly displayed
please compare the two attached pictures to see the difference i am referring to. correct MACD ** Attachment added: MACDpicwiki.gif http://launchpadlibrarian.net/37520740/MACDpicwiki.gif -- invest applet MACD is incorrectly displayed https://bugs.launchpad.net/bugs/504042 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 504042] Re: invest applet MACD is incorrectly displayed
invest applet ** Attachment added: Screenshot.png http://launchpadlibrarian.net/37520747/Screenshot.png -- invest applet MACD is incorrectly displayed https://bugs.launchpad.net/bugs/504042 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 418627] Re: [Regression] No sound in Karmic (HDA Intel ICH6 Realtek ALC260)
after the latest kernel upgrade last week my sound has been behaving erratically again. retrinqueiro posted this on 2009-11-02: * - Edit /etc/pulse/default.pa - Uncomment the line: #load-module module-alsa-sink - killall pulseaudio in a terminal and wait a bit until it respawns (you'll know it because the mixer icon in the panel appears again) * i now have sound, but with odd symptoms regarding the little mute indicator light (which is also a touch sensitive button) on my keyboard. normally its orange when the sound is muted (or the sound is broken) and blue otherwise. now, it is orange when no sound is playing (when there are no applications listed as playing sound in the pulse preferences dialog), and blue when sounds are being played! the button functionality still works so its not so bad, but i keep seeing the orange light and thinking the sound has failed again! what was wrong with the sound setup in intrepid? can somebody explain why we need pulseaudio? it has caused terrible sound issues with wine and dosbox for me. -- [Regression] No sound in Karmic (HDA Intel ICH6 Realtek ALC260) https://bugs.launchpad.net/bugs/418627 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 488956] Re: loud and long shutdown/restart beep - version 2.6.31-15.50 (karmic)
since posting this bug report, the beeping has stopped happening, or at least hasn't happened since then. i have changed nothing. i cant explain this, but i cannot reproduce the bug either. -- loud and long shutdown/restart beep - version 2.6.31-15.50 (karmic) https://bugs.launchpad.net/bugs/488956 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 488956] Re: loud and long shutdown/restart beep - version 2.6.31-15.50 (karmic)
** Attachment added: AlsaDevices.txt http://launchpadlibrarian.net/36127230/AlsaDevices.txt ** Attachment added: AplayDevices.txt http://launchpadlibrarian.net/36127231/AplayDevices.txt ** Attachment added: ArecordDevices.txt http://launchpadlibrarian.net/36127232/ArecordDevices.txt ** Attachment added: BootDmesg.txt http://launchpadlibrarian.net/36127233/BootDmesg.txt ** Attachment added: Card0.Amixer.values.txt http://launchpadlibrarian.net/36127234/Card0.Amixer.values.txt ** Attachment added: Card0.Codecs.codec.0.txt http://launchpadlibrarian.net/36127235/Card0.Codecs.codec.0.txt ** Attachment added: Card0.Codecs.codec.1.txt http://launchpadlibrarian.net/36127238/Card0.Codecs.codec.1.txt ** Attachment added: CurrentDmesg.txt http://launchpadlibrarian.net/36127239/CurrentDmesg.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/36127240/Dependencies.txt ** Attachment added: IwConfig.txt http://launchpadlibrarian.net/36127241/IwConfig.txt ** Attachment added: Lspci.txt http://launchpadlibrarian.net/36127242/Lspci.txt ** Attachment added: Lsusb.txt http://launchpadlibrarian.net/36127243/Lsusb.txt ** Attachment added: PciMultimedia.txt http://launchpadlibrarian.net/36127244/PciMultimedia.txt ** Attachment added: ProcCpuinfo.txt http://launchpadlibrarian.net/36127245/ProcCpuinfo.txt ** Attachment added: ProcInterrupts.txt http://launchpadlibrarian.net/36127246/ProcInterrupts.txt ** Attachment added: ProcModules.txt http://launchpadlibrarian.net/36127248/ProcModules.txt ** Attachment added: RfKill.txt http://launchpadlibrarian.net/36127249/RfKill.txt ** Attachment added: UdevDb.txt http://launchpadlibrarian.net/36127250/UdevDb.txt ** Attachment added: UdevLog.txt http://launchpadlibrarian.net/36127251/UdevLog.txt ** Attachment added: WifiSyslog.txt http://launchpadlibrarian.net/36127252/WifiSyslog.txt -- loud and long shutdown/restart beep - version 2.6.31-15.50 (karmic) https://bugs.launchpad.net/bugs/488956 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 488956] [NEW] loud and long shutdown/restart beep - version 2.6.31-15.50 (karmic)
Public bug reported: when i shutdown my hp dv6000 series laptop i get a very loud and long (till power-down) beep. this is the first time i have ever witness this happen, and i believe it is attributable to the upgrade to kernel 2.6.31-15.50. since it happened the first time i shut down after booting this kernel. i apologise for not being more detailed, but i dont know where to begin with this one as it could be so many things. i will gladly provide further information/logs etc if asked. cheers ex-oficio ProblemType: Bug Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luke 2092 F pulseaudio /dev/snd/pcmC0D0c: luke 2092 F...m pulseaudio /dev/snd/pcmC0D0p: luke 2092 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf840 irq 22' Mixer name : 'Realtek ALC268' Components : 'HDA:10ec0268,103c30cc,0013 HDA:10573055,10573055,00100700' Controls : 15 Simple ctrls : 12 Date: Thu Nov 26 21:36:19 2009 DistroRelease: Ubuntu 9.10 HibernationDevice: RESUME=UUID=b368f3dd-f77d-4310-8274-350282fc486f MachineType: Hewlett-Packard HP Pavilion dv6500 Notebook PC NonfreeKernelModules: nvidia Package: linux-image-2.6.31-15-generic 2.6.31-15.50 ProcCmdLine: root=UUID=8a29b134-c2cf-41b9-8eee-2da9b1f05b30 ro quiet splash ProcEnviron: LANG=en_GB.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-15.50-generic RelatedPackageVersions: linux-backports-modules-2.6.31-15-generic 2.6.31-15.17 linux-firmware 1.25 SourcePackage: linux Uname: Linux 2.6.31-15-generic x86_64 WpaSupplicantLog: XsessionErrors: (gnome-settings-daemon:2120): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed (gnome-settings-daemon:2120): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed (polkit-gnome-authentication-agent-1:2216): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed (nautilus:2209): Eel-CRITICAL **: eel_preferences_get_boolean: assertion `preferences_is_initialized ()' failed (gnome-panel:2205): Gdk-WARNING **: /build/buildd/gtk+2.0-2.18.3/gdk/x11/gdkdrawable-x11.c:952 drawable is not a pixmap or window dmi.bios.date: 11/25/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.59 dmi.board.name: 30D2 dmi.board.vendor: Quanta dmi.board.version: 79.2E dmi.chassis.type: 10 dmi.chassis.vendor: Quanta dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.59:bd11/25/2008:svnHewlett-Packard:pnHPPaviliondv6500NotebookPC:pvrRev1:rvnQuanta:rn30D2:rvr79.2E:cvnQuanta:ct10:cvrN/A: dmi.product.name: HP Pavilion dv6500 Notebook PC dmi.product.version: Rev 1 dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug -- loud and long shutdown/restart beep - version 2.6.31-15.50 (karmic) https://bugs.launchpad.net/bugs/488956 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 476909] Re: exail has no intuitive way to clear the playlist or get a new one
guys, i didn't want to come across as acrimonious. Johannes sorry you felt the need to take it in the way you did. just trying to help keep a good program good. hopefully you can at least see the lack of clarity on how to clear the playlist, even in light of johannes' list of ways to do it in his last post. i wasnt aware of all those ooptions. they arent made clear. actually the best solution is a clear way. if the consensus isto favour making unclear then fine. im not here to argue. -- exail has no intuitive way to clear the playlist or get a new one https://bugs.launchpad.net/bugs/476909 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 152264] Re: Shadow remains after window closed
i have this bug when using the invest applet or the dictionary applet. these are panel applets. when they are opened and closed a shadow reamins on the destop, overlaying icons etc. only happens with compiz, not metacity. to reproduce: use compiz add invest or dictionary applet to panel click widget to open the applet window click widget to close the applet window observe shadow. screeshot attached regards, ex-oficio ** Attachment added: Screenshot1.png http://launchpadlibrarian.net/35194518/Screenshot1.png -- Shadow remains after window closed https://bugs.launchpad.net/bugs/152264 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 152264] Re: Shadow remains after window closed
i have this bug when using the invest applet or the dictionary applet. these are panel applets. when they are opened and closed a shadow reamins on the destop, overlaying icons etc. only happens with compiz, not metacity. to reproduce: use compiz add invest or dictionary applet to panel click widget to open the applet window click widget to close the applet window observe shadow. screenshot attached regards, ex-oficio ** Attachment added: Screenshot1.png http://launchpadlibrarian.net/35194906/Screenshot1.png -- Shadow remains after window closed https://bugs.launchpad.net/bugs/152264 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 449272] Re: Invest applet drop down leaves a shadow on desktop
i have this bug when using the invest applet or the dictionary applet. these are panel applets. when they are opened and closed a shadow reamins on the destop, overlaying icons etc. only happens with compiz, not metacity. to reproduce: use compiz add invest or dictionary applet to panel click widget to open the applet window click widget to close the applet window observe shadow. screenshot attached regards, ex-oficio ** Attachment added: Screenshot1.png http://launchpadlibrarian.net/35195208/Screenshot1.png -- Invest applet drop down leaves a shadow on desktop https://bugs.launchpad.net/bugs/449272 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 449272] Re: Invest applet drop down leaves a shadow on desktop
i should say, im using nvidia 185.18.36 and 64bit ubuntu. -- Invest applet drop down leaves a shadow on desktop https://bugs.launchpad.net/bugs/449272 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 438536] Re: Notifications should show up closer to top right
the changes to notifications as compared to jaunty are a seriously retrograde step. i have just installed juliens fantastic package to fix this bug and it really is so much better. the correct behaviour should be that all passive notifications appear in the corner with existing notifications moving downwards to make room in a downward-growing stack. there was no need whatsoever to alter the jaunty behaviour. i think it was as far back as the intrepid release that volume and brightness notifications appeared in the bottom-middle and it looked very nice. i have to say that i didnt feel the move to the top right was a negative development. the notifications themselves are very nice- looking, and the design of them is one thing that has improved with the karmic release. i have already seen the response from the ubuntu thought police about this which was essentially i will hear your protestations just so long as they dont disagree with the decided policy and frankly its the screensaver-settings nonsense all over again, and the attitude beggars belief. i am always telling people how good ubuntu is (and of course i still think its the best), but this is the first time i have upgraded and been really disappointed with the tinkering that has taken place. good day. -- Notifications should show up closer to top right https://bugs.launchpad.net/bugs/438536 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 418627] Re: [Regression] No sound in Karmic (HDA Intel ICH6 Realtek ALC260)
i have lost sound on upgrading to karmic. this is a kingsize problem for me. hopefully relevant info: l...@orion:~$ lsmod | grep snd snd_hda_codec_si3054 5856 1 snd_hda_codec_realtek 277860 1 snd_hda_intel 31880 3 snd_hda_codec 87584 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel snd_hwdep9352 1 snd_hda_codec snd_pcm_oss 44704 0 snd_mixer_oss 18976 1 snd_pcm_oss snd_pcm93160 6 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 3460 0 snd_seq_oss 33440 0 snd_seq_midi8192 0 snd_rawmidi 27360 1 snd_seq_midi snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi snd_seq60608 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 26992 2 snd_pcm,snd_seq snd_seq_device8308 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd77096 17 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore9088 1 snd snd_page_alloc 10928 2 snd_hda_intel,snd_pcm relevant part of verbose lspci: 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Hewlett-Packard Company Device 30cc Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f840 (64-bit, non-prefetchable) [size=16K] Capabilities: access denied Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel also, sound preferences shows just a dummy device, and alsamixer shows the sound chip to be Realtek ALC268. mute led is is illuminated orange (should be blue). this has never happened before. basically it looks to me like the kernel module has been broken bringing all audio down with it... hope somebody can help. i will now try booting using the old kernel module from jaunty to see if im right... i will be glad to provide further info please just tell me what to post. thanks to everyone who helps people like me and makes ubuntu the best OS there is (albeit temporarily having a problem). ex-oficio ** Attachment added: sound prefs showing only dummy device. http://launchpadlibrarian.net/34768892/Screenshot-Sound%20Preferences.png -- [Regression] No sound in Karmic (HDA Intel ICH6 Realtek ALC260) https://bugs.launchpad.net/bugs/418627 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 418627] Re: [Regression] No sound in Karmic (HDA Intel ICH6 Realtek ALC260)
the old kernel + modules didnt help. dont know what has happen to the sound setup in ubuntu, but it doesnt wanty to play nicely with the driver and hardwiare. to expand on my previous post, the mute light is blue for most of the boot-up process (which is a total horror-show compared to the jaunty boot by the way) but then turns orange near the end. something is disabling the sound card! all that dmesg has is: [ 24.873949] HDA Intel :00:1b.0: PCI INT A - GSI 22 (level, low) - IRQ 22 [ 24.873984] HDA Intel :00:1b.0: setting latency timer to 64 [ 25.591505] input: HDA Digital PCBeep as /devices/pci:00/:00:1b.0/input/ ? -- [Regression] No sound in Karmic (HDA Intel ICH6 Realtek ALC260) https://bugs.launchpad.net/bugs/418627 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 418627] Re: [Regression] No sound in Karmic (HDA Intel ICH6 Realtek ALC260)
the hack to /etc/pulse/default.pa posted by Nusret on 2009-10-28 (post#77) worked for me. to be accurate, i made the change, rebooted opened sound preferences and saw that the dummy device had been replaced by internal audio analog device. however mute led was orange, but sotware reported the device to be unmuted. after cycling the mute checkbox on and off, the led was blue and behaviour was correct. this behaviour has continued after a reboot. audio jack behaviour is correct as well. this is obviously not an acceptable situation for the less tech savvy, and really shouldnt be acceptable to any of us because it means that something somewhere isnt doing what it should be. it also probably means that when the issue is solved those of us that implement this hack will end up with incorrect /etc/pulse/default.pa files, but hey at least i have sound now. i will still gladly provide any pertinent info asked for in pursuit of fixing this bug as it isnt really fixed. cheers, ex-oficio. -- [Regression] No sound in Karmic (HDA Intel ICH6 Realtek ALC260) https://bugs.launchpad.net/bugs/418627 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
RE: [Bug 387538] Re: window controls not displaying correctly with dust sand theme
i suspect it may be because of compiz. in fact, i just switched to metacity and it doesnt happen. however, only this theme suffers from it, and i couldnt say whether the bug is in gnome-themes-ubuntu or in compiz. Date: Thu, 15 Oct 2009 03:42:17 + From: xty2...@gmail.com To: luke.i.wilkin...@live.co.uk Subject: [Bug 387538] Re: window controls not displaying correctly with dust sand theme I haven't noticed this problem in Karmic... -- window controls not displaying correctly with dust sand theme https://bugs.launchpad.net/bugs/387538 You received this bug notification because you are a direct subscriber of the bug. Status in “gnome-themes-ubuntu” package in Ubuntu: New Bug description: Binary package hint: gnome-themes Ubuntu Version: Description: Ubuntu 9.04 Release: 9.04 possibly relevant: using nvidia closed-source driver using compiz package version: gnome-themes: Installed: 2.26.0-0ubuntu1 Candidate: 2.26.0-0ubuntu1 Version table: *** 2.26.0-0ubuntu1 0 500 http://gb.archive.ubuntu.com jaunty/universe Packages 100 /var/lib/dpkg/status when the mouse is hovered over the window controls, they are supposed to turn black. however, about 50% of the time they dont. sounds trivial but it is highly detractive from an otherwise excellent theme. those with sharp eyes will see that i have customised the theme by using icons from another theme, but this bug manifests itself with the the unaltered theme as well. the problem is with all three of the controls, not just the close control. i will upload a screenshot to illustrate. may i also add my second favourite is the glossy theme and i am totally amazed it was considered ugly and removed to an extra package that has to be installed. again the sharp eyed will see that the scoll-bars i am using are from that theme. _ Did you know you can get Messenger on your mobile? http://clk.atdmt.com/UKM/go/174426567/direct/01/ -- window controls not displaying correctly with dust sand theme https://bugs.launchpad.net/bugs/387538 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 213128] Re: [Master] hal/acpi incorrectly reports AC adapter state
g3mu, I'm happy to report your suggested hack works for me, many thanks. i wouldn't have thought of that as it required a bit more insight into the system than i have! did you post it on the bug page? much appreciated, thanks again, L Wilkinson On Mon, 2009-08-10 at 05:40 +, Gemu wrote: hi I have a little hack for this problem cat /proc/acpi/ac_adapter/ACAD/state this command to force update the status of AC_Adapter correctly, this will be used for the hack. sudo vim /etc/acpi/events/battery_event (copy/paste) event=battery.* action=cat /proc/acpi/ac_adapter/AC/state /dev/null then restarting the daemon acpid or reboot. service acpid restart now plugged in/out should work out correctly. -- [Master] hal/acpi incorrectly reports AC adapter state https://bugs.launchpad.net/bugs/213128 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 213128] Re: [Master] hal/acpi incorrectly reports AC adapter state
i experience this issue INTERMITTENTLY on my HP dv6599ea (dv6000 series basically). when it decides to exhibit the behaviour i have discovered that issuing the command cat /proc/acpi/ac_adapter/ACAD/state gives the response: state: off-line or: state: on-line depending on what the case may be, but the act of issuing the command causes gnome or hal or guidance-power-manager (or whatever the source of the issue is) is become aware of the proper state, and make all the proper display, and power adjustments. i find this strange (and certainly beyond my understanding of the OS), and just thought i would let you know in case it helps; apologies if it doesn't. when the problem is there, it is precisely as described in the initial description of the bug at the top of this report. only deviation is that i am not using kde, i am using gnome(ubuntu jaunty): uname -a Linux orion 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 x86_64 GNU/Linux gnome version as per the attached .png. many thanks for all efforts. ** Attachment added: Screenshot-System Monitor.png http://launchpadlibrarian.net/28004681/Screenshot-System%20Monitor.png -- [Master] hal/acpi incorrectly reports AC adapter state https://bugs.launchpad.net/bugs/213128 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 387538] [NEW] window controls not displaying correctly with dust sand theme
Public bug reported: Binary package hint: gnome-themes Ubuntu Version: Description:Ubuntu 9.04 Release:9.04 possibly relevant: using nvidia closed-source driver using compiz package version: gnome-themes: Installed: 2.26.0-0ubuntu1 Candidate: 2.26.0-0ubuntu1 Version table: *** 2.26.0-0ubuntu1 0 500 http://gb.archive.ubuntu.com jaunty/universe Packages 100 /var/lib/dpkg/status when the mouse is hovered over the window controls, they are supposed to turn black. however, about 50% of the time they dont. sounds trivial but it is highly detractive from an otherwise excellent theme. those with sharp eyes will see that i have customised the theme by using icons from another theme, but this bug manifests itself with the the unaltered theme as well. the problem is with all three of the controls, not just the close control. i will upload a screenshot to illustrate. may i also add my second favourite is the glossy theme and i am totally amazed it was considered ugly and removed to an extra package that has to be installed. again the sharp eyed will see that the scoll- bars i am using are from that theme. ** Affects: gnome-themes (Ubuntu) Importance: Undecided Status: New -- window controls not displaying correctly with dust sand theme https://bugs.launchpad.net/bugs/387538 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 387538] Re: window controls not displaying correctly with dust sand theme
** Attachment added: Screenshot.png http://launchpadlibrarian.net/27967161/Screenshot.png -- window controls not displaying correctly with dust sand theme https://bugs.launchpad.net/bugs/387538 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
