In my case, may have been change of ip address on server(reset of router
dhcp tables) I had locked server to ip address in router and set bind
address in my.cnf to that address to allow logins across my network.).
Update has gone through and Ive changed my.cnf to listen on all
interfaces
In my case, may have been change of ip address on server(reset of router
dhcp tables) I had locked server to ip address in router and set bind
address in my.cnf to that address to allow logins across my network.).
Update has gone through and Ive changed my.cnf to listen on all
interfaces
Public bug reported:
standard upgrade process. Im not sure what the issue is.
ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: mysql-server-5.6 5.6.28-0ubuntu0.15.10.1
ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
Uname: Linux 4.2.0-18-generic i686
ApportVersion:
Public bug reported:
standard upgrade process. Im not sure what the issue is.
ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: mysql-server-5.6 5.6.28-0ubuntu0.15.10.1
ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
Uname: Linux 4.2.0-18-generic i686
ApportVersion:
Public bug reported:
Binary package hint: rsyslog
bug occurred during routine upgrade
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: rsyslog 4.2.0-2ubuntu8.1
ProcVersionSignature: Ubuntu 2.6.32-27.49-386 2.6.32.26+drm33.12
Uname: Linux 2.6.32-27-386 i686
Architecture: i386
Date: Tue
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/692919
Title:
package rsyslog 4.2.0-2ubuntu8.1 failed to install/upgrade: subprocess
installed post-installation script returned error exit status 1
machine still boots ok...
I found and tried running the rsyslog.postinst script from a command window
sudo ./rsyslog.postinst configure
message was
start : job is already running : rsyslog
invoke-rc.d: initscript rsyslog action start failed
Not sure if this was the same error that occurred
I have similar error running google earth
mcph...@farbhalach:~$ googleearth
googleearth-bin: ../../src/xcb_io.c:542: _XRead: Assertion
`dpy-xcb-reply_data != ((void *)0)' failed.
Google Earth has caught signal 6.
We apologize for the inconvenience, but Google Earth has crashed.
This is a bug
Pascal
Thanks for that
I needed to delete the link and then did the reinstall, and every thing came
right.
Perhaps a reconfigure would have done the job also.
--
Intrepid Beta missing CUPS service in Gnome Services Administration Tool
https://bugs.launchpad.net/bugs/283327
You received this
I upgraded one of my machines from hardy to intrepid to jaunty on 1 aug 2009.
prior to this i could xdmcp to my other machine (still running hardy).
Now i cant, so the answer to the question is Yes, this is now an issue in
Jaunty.
Selecting the remote host from the jaunty login screen on the
I upgraded last night(1 aug 2009) from Intrepid to jaunty, having upgraded from
hardy to Intrepid last week
At the intrepid stage I noticed my printiong had failed, found no cups
service running and no cups service in the gnome services list
this is also the case with Jaunty.
my printing has
I just got this bug with the latest batch of updates.
I noticed during the scrollkeeper install a number of errors parsing a
scrollkeeper_??? .xml file during the install. sorry didnt write the filename
down,and cant find any trace of it now.
--
scrollkeeper-update failed with corrupted
Bryce
This bug is no longer an issue for me.
The remedial action I noted earlier got me round the problem
Since reporting the bug I have picked up linux 2-6-24-19 and have upgraded the
ati driver to ati 8.9 ( xorg-driver-fglrx 8.532. )
I have full 3D, and the compiz unsupported value issue has
I HAVE A FIX
Following the clue i found above - that vermagic is the same for all dkms
installs, i decided to reinstall the ati_8.6 driver whilst running under the
2.6.24-19 kernel as it seemed maybe the ati installer generated module was
carrying its vermagic and other symbols etc from the
Yes Ive tried the -19 kernel along with upgrading to the latest ati driver
(8.6) ,This driver didnt work with the -17, -18 or -19 kernel. Im still stuck
on the -16. Can anyone else confirm that they get the message
fglrx: disagrees about version of symbol struct_module
in their dmesg. ( you need
Further research and Ive come up with this ( and im way out my depth
here !!!)
$ sudo modinfo -F vermagic -k 2.6.24-16-386 fglrx
2.6.24-16-386 mod_unload 486
$ sudo modinfo -F vermagic -k 2.6.24-17-386 fglrx
2.6.24-16-386 mod_unload 486
$ sudo modinfo -F vermagic -k 2.6.24-18-386 fglrx
Agreed, I just pulled down the update to the -18 kernel tonight and the problem
is still there.
dmesg has these lines when booting on -18 kernel
[ 45.119128] fglrx: disagrees about version of symbol struct_module
[ 45.703044] parport_pc 00:09: reported by Plug and Play ACPI
[ 45.703148]
I have the same problem, I run ATI 9600XT card, was on ati 8.4 drivers and
kernel 2.6.24-16-386. During upgrade to 2.6.24-17 2 nights ago I noticed a
message indicating an inability to add the fglrx module to the kernel, and on
reboot was able to log in but end up at white screen.
I used the
Thinking back on the above , i think the update brought down the
2.6.24-17-generic headers. I think i recall at one point booting into
2.6.24-17-generic recovery mode and seeing it install the fglrx module
against that kernel. I later removed it from dkms leaving status as
above.
--
Kernel
Further Info
running compiz from a terminal showed unable to find
/etc/xdg/compiz/compiz-manager
Googling I found information on a diversion that was stopping compiz, and ran.
code
sudo dpkg-divert --rename --remove /etc/xdg/compiz/compiz-manager
code/ with the result
Removing `diversion of
The Gconf backend problem has been reported.
Bug #209207 in compiz (Ubuntu)
--
gutsy to hardy - all fglrx drivers fail- low graphics
https://bugs.launchpad.net/bugs/228573
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Thanks Corvar
As you suggested, I installed the fglrx driver from the repository and ran
aticonfig -- initial --force-monitor=crt1
The system rebooted fine, but for some reason the kernel module wasnt loading,
however it didnt go back to low graphics mode.
i then removed the repository packages
Public bug reported:
ATI Radeon 9600XT card ,Was running Gutsy using the ati proprietary 8.443
drivers. had 3d acceln, and was able to invoke compiz desktop effects.
After successful Hardy (8.04) upgrade the first reboot gave me the low
graphics mode screen and after continuing i was stuck in
Pedro
Tonight i upgraded to Gutsy, and Evince is now displaying pdf's correctly.
The upgrade did bring in a new version of the fglrx driver for the ATI card.
I had Direct Rendering enabled and composite disbled on feisty. ( ati drivers
needed composite disabled to enable DR i wanted DR)
After
Same problem here - different repository
received approx 2020 hrs nz daylight saving time 29 nov (thats about 0720 zulu)
Failed to fetch http://security.ubuntu.com/ubuntu/dists/gutsy-
security/main/source/Sources.bz2 MD5Sum mismatch
--
Upgrading from Feisty to Gutsy - Sources.bz2 MD5Sum
Pedro
I have been unsuccessful in obtaining a back trace. Ive tried by running
evince thru gdm, and attaching gdm to a running session.
with evince open, I open a pdf, and hit f5 (or select presentation view) and
the session crashes.
However the gdb session never returns to the gdb prompt.
if
** Attachment added: Screenshot.png
http://launchpadlibrarian.net/10581159/Screenshot.png
--
evince on fiesty ( prev edgy and dapper)- just doesnt work at all !!
https://bugs.launchpad.net/bugs/164802
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
Tried again - I attached gdb to the session after the crash (
desperation??) and picked up the information in gdb-evince_2.txt.
** Attachment added: gdb-evince_2.txt
http://launchpadlibrarian.net/10581187/gdb-evince_2.txt
--
evince on fiesty ( prev edgy and dapper)- just doesnt work at all
Compiz is not enabled.
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Tue, 27 Nov 2007 13:25:15 +
Subject: [Bug 164802] Re: evince on fiesty ( prev edgy and dapper)- just
doesnt work at all !!
Do you have compiz enabled? Does it happen without it? That's probably a
issue
Public bug reported:
Ubuntu 7.04 and evince 0.8.1.0.ubuntu1 - I cant successfully open any
pdf documents. Attempts result in either a complete lockup with the
entire screen black and a session that will not close, or an evince
panel where the left hand side is grey and the right hand side
I ran /usr/bin/evince from a terminal and opened a pdf. I got
thumbnaiolsin the left hand pane, but nothing in the right hand pane. I
obtained the following messages from the terminal session.
(evince:11358): GdkPixbuf-CRITICAL **: gdk_pixbuf_new: assertion `width
0' failed
(evince:11358):
Hey Guys
Ive upgraded to Feisty from Dapper this week (21 September)and i am getting
this behaviour (slect main menu option in system/preferences, tick the box to
add a menu (say debian) , close the window and nothing changes ) but my userid
is in the admin group.
[EMAIL PROTECTED]:/etc$
Just upgraded from dapper to edgy - ATI 9600Xt card
had problems at first with kde overwriting the ubuntu splash - finally got that
sorted and have run into this problem - startup is fine , shutdown is
psychedelic and the progress bar has question marks in it
--
usplash messes up colors on
33 matches
Mail list logo
