I installed the new program as per instructions. Had an error when
restarting the program. An error report was generated and sent to the
bug people. Did a manual fsck and then things worked right. Once
operating the computer recognized sound programs but would not perform.
Placed a cd in the
PROTECTED]
Sent: Monday, February 19, 2007 2:32:08 AM
Subject: [Bug 82986] Re: No sound after initial install
slowayne, it appears that the modules for your card are not loading, and
the dmesg output confirms it, even though lspci shows that the card
exists.
[17179606.336000] ali15x3_smbus :00
the following error message shows on shut down:
Shutting down ALSA...
warning: 'alsactl store' failed with error message 'alsactl:save_state:1163:
No soundcards found:...
Toby Smithe [EMAIL PROTECTED] wrote:
Right. So the system hasn't assigned the hardware an interrupt. It's not
detecting
[EMAIL PROTECTED]:~$ cat /proc/interrupts
CPU0
0: 254649 XT-PIC timer
1:258 XT-PIC i8042
2: 0 XT-PIC cascade
7: 3 XT-PIC parport0
8: 3 XT-PIC rtc
9: 9795 XT-PIC acpi
11:
Its a lap top. I have never touched any sound boards if it has one. I have
only added memory cards.
Wayne
Toby Smithe [EMAIL PROTECTED] wrote: Right. So the system hasn't assigned the
hardware an interrupt. It's not
detecting it properly, even though it shows up in lspci. Is it all
I opened the lap top up and found everything inside looked like it was hooked
up propertly.
Toby Smithe [EMAIL PROTECTED] wrote:
Right. So the system hasn't assigned the hardware an interrupt. It's not
detecting it properly, even though it shows up in lspci. Is it all
connected properly?
[EMAIL PROTECTED]:~$ amixer
amixer: Mixer attach default error: No such device
[EMAIL PROTECTED]:~$
[EMAIL PROTECTED]:~$ asoundconf list
Names of available sound cards:
[EMAIL PROTECTED]:~$
Brian Murray [EMAIL PROTECTED] wrote: Could you please add the output of
'amixer' and 'asoundconf list'
Thank you for the response. Here is the data you asked for.
I am not sure how to append to the bug report.
Wayne
[EMAIL PROTECTED]:~$ lspci
:00:00.0 Host bridge: ALi Corporation M1621 (rev 01)
:00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (rev 01)
:00:02.0 USB
Brian lspc -vvn
[EMAIL PROTECTED]:~$ lspci-vvn
bash: lspci-vvn: command not found
[EMAIL PROTECTED]:~$ lspci -vvn
:00:00.0 0600: 10b9:1621 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B-
Public bug reported:
Version 6.06 Computer Laptop KDS 6480. Pent 3 processor. Under device
manager there is listed AT style speaker system with various perameters. When
I click volume control or try to open a program using sound the error message
says I either do not have a sound card or
10 matches
Mail list logo