Public bug reported:
When I close the lid and open it, I get a blinking text mode cursor on
top left, ALT+F1, 2, 3... show the same cursor in all TTYs and the
machine does not respond to my typing. Also, the fan starts spinning at
it highest speed and I need to reboot in order to resume working on the
machine. However, I still can ssh into the machine after the machine
hangs up.
Further this happens in both CLI mode and Graphics mode.
"ForceEnablePipeA" "true" does not make a difference.
Output of: lspci -vvnn |grep -A1 "VGA compat"
01:00.0 VGA compatible controller [0300]: Trident Microsystems CyberBlade XPAi1
[1023:8820] (rev 82) (prog-if 00 [VGA controller]) Subsystem: Toshiba America
Info Systems Device [1179:0001]
Machine: Toshiba Dynabook SS 2000 DS 80P/2
Ubuntu version: 13.10
lshw -c video
*-display UNCLAIMED
description: VGA compatible controller
product: CyberBlade XPAi1
vendor: Trident Microsystems
physical id: 0
bus info: pci@0000:01:00.0
version: 82
width: 32 bits
clock: 66MHz
capabilities: agp agp-2.0 pm vga_controller bus_master cap_list
configuration: latency=8
resources: memory:fc000000-fdffffff memory:fbc00000-fbffffff
memory:f8000000-f9ffffff memory:f7ff8000-f7ffffff memory:20100000-2010ffff
Excerpt of lspci -vv:
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 (rev
82) (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 8
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at fbc00000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f8000000 (32-bit, non-prefetchable) [size=32M]
Region 3: Memory at f7ff8000 (32-bit, non-prefetchable) [size=32K]
[virtual] Expansion ROM at 20100000 [disabled] [size=64K]
Capabilities: [80] AGP version 2.0
Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW-
AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [90] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
===
ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: xorg 1:7.7+1ubuntu6
ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
Uname: Linux 3.11.0-12-generic i686
.tmp.unity.support.test.1:
ApportVersion: 2.12.5-0ubuntu2.1
Architecture: i386
CompizPlugins: No value set for
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
Date: Sat Oct 26 23:02:34 2013
DistUpgraded: 2013-10-20 16:58:02,580 DEBUG enabling apt cron job
DistroCodename: saucy
DistroVariant: ubuntu
DkmsStatus:
tp-smapi, 0.41, 3.11.0-12-generic, i686: installed
tp-smapi, 0.41, 3.5.0-27-generic, i686: installed
ExtraDebuggingInterest: Yes
GpuHangFrequency: Continuously
GpuHangReproducibility: Yes, I can easily reproduce it
GpuHangStarted: I don't know
GraphicsCard:
Trident Microsystems CyberBlade XPAi1 [1023:8820] (rev 82) (prog-if 00 [VGA
controller])
Subsystem: Toshiba America Info Systems Device [1179:0001]
LightdmGreeterLog: Failed to launch bus: Failed to connect to session bus
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: TOSHIBA DynaBook SS 2000 DS80P/2
MarkForUpload: True
PccardctlIdent:
Socket 0:
no product info available
Socket 1:
no product info available
PccardctlStatus:
Socket 0:
no card
Socket 1:
no card
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic
root=UUID=37ca0876-9a7b-4fc8-a23c-0337b5598734 ro text silent
SourcePackage: xorg
Symptom: display
Title: Xorg freeze
UpgradeStatus: Upgraded to saucy on 2013-10-20 (6 days ago)
dmi.bios.date: 04/25/2003
dmi.bios.vendor: TOSHIBA
dmi.bios.version: Version 1.40
dmi.board.name: Portable PC
dmi.board.vendor: TOSHIBA
dmi.board.version: Version A0
dmi.chassis.asset.tag: 0000000000
dmi.chassis.type: 10
dmi.chassis.vendor: TOSHIBA
dmi.chassis.version: Version 1.0
dmi.modalias:
dmi:bvnTOSHIBA:bvrVersion1.40:bd04/25/2003:svnTOSHIBA:pnDynaBookSS2000DS80P/2:pvrPP20080P2F62:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0:
dmi.product.name: DynaBook SS 2000 DS80P/2
dmi.product.version: PP20080P2F62
dmi.sys.vendor: TOSHIBA
version.compiz: compiz 1:0.9.10+13.10.20131011-0ubuntu1
version.libdrm2: libdrm2 2.4.46-1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.2.1-1ubuntu3
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.2.1-1ubuntu3
version.xserver-xorg-core: xserver-xorg-core 2:1.14.3-3ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu10
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.904-0ubuntu2
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.9-2ubuntu1
xserver.bootTime: Sat Oct 26 22:58:27 2013
xserver.configfile: /etc/X11/xorg.conf
xserver.errors:
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
xserver.version: 2:1.14.3-3ubuntu2
** Affects: xorg (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-bug freeze i386 saucy ubuntu
** Description changed:
- .
+ When I close the lid and open it, I get a blinking text mode cursor on
+ top left, ALT+F1, 2, 3... show the same cursor in all TTYs and the
+ machine does not respond to my typing. Also, the fan starts spinning at
+ it highest speed and I need to reboot in order to resume working on the
+ machine. However, I still can ssh into the machine after the machine
+ hangs up.
+
+ Further this happens in both CLI mode and Graphics mode.
+ "ForceEnablePipeA" "true" does not make a difference.
+
+ Output of: lspci -vvnn |grep -A1 "VGA compat"
+ 01:00.0 VGA compatible controller [0300]: Trident Microsystems CyberBlade
XPAi1 [1023:8820] (rev 82) (prog-if 00 [VGA controller]) Subsystem: Toshiba
America Info Systems Device [1179:0001]
+
+ Machine: Toshiba Dynabook SS 2000 DS 80P/2
+ Ubuntu version: 13.10
+
+ lshw -c video
+ *-display UNCLAIMED
+ description: VGA compatible controller
+ product: CyberBlade XPAi1
+ vendor: Trident Microsystems
+ physical id: 0
+ bus info: pci@0000:01:00.0
+ version: 82
+ width: 32 bits
+ clock: 66MHz
+ capabilities: agp agp-2.0 pm vga_controller bus_master cap_list
+ configuration: latency=8
+ resources: memory:fc000000-fdffffff memory:fbc00000-fbffffff
memory:f8000000-f9ffffff memory:f7ff8000-f7ffffff memory:20100000-2010ffff
+
+ Excerpt of lspci -vv:
+
+ 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 (rev
82) (prog-if 00 [VGA controller])
+ Subsystem: Toshiba America Info Systems Device 0001
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
+ Latency: 8
+ Interrupt: pin A routed to IRQ 11
+ Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=32M]
+ Region 1: Memory at fbc00000 (32-bit, non-prefetchable) [size=4M]
+ Region 2: Memory at f8000000 (32-bit, non-prefetchable) [size=32M]
+ Region 3: Memory at f7ff8000 (32-bit, non-prefetchable) [size=32K]
+ [virtual] Expansion ROM at 20100000 [disabled] [size=64K]
+ Capabilities: [80] AGP version 2.0
+ Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW-
AGP3- Rate=x1,x2,x4
+ Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
+ Capabilities: [90] Power Management version 2
+ Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+
+ ===
+
+
ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: xorg 1:7.7+1ubuntu6
ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
Uname: Linux 3.11.0-12-generic i686
.tmp.unity.support.test.1:
-
+
ApportVersion: 2.12.5-0ubuntu2.1
Architecture: i386
CompizPlugins: No value set for
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
Date: Sat Oct 26 23:02:34 2013
DistUpgraded: 2013-10-20 16:58:02,580 DEBUG enabling apt cron job
DistroCodename: saucy
DistroVariant: ubuntu
DkmsStatus:
- tp-smapi, 0.41, 3.11.0-12-generic, i686: installed
- tp-smapi, 0.41, 3.5.0-27-generic, i686: installed
+ tp-smapi, 0.41, 3.11.0-12-generic, i686: installed
+ tp-smapi, 0.41, 3.5.0-27-generic, i686: installed
ExtraDebuggingInterest: Yes
GpuHangFrequency: Continuously
GpuHangReproducibility: Yes, I can easily reproduce it
GpuHangStarted: I don't know
GraphicsCard:
- Trident Microsystems CyberBlade XPAi1 [1023:8820] (rev 82) (prog-if 00 [VGA
controller])
- Subsystem: Toshiba America Info Systems Device [1179:0001]
+ Trident Microsystems CyberBlade XPAi1 [1023:8820] (rev 82) (prog-if 00 [VGA
controller])
+ Subsystem: Toshiba America Info Systems Device [1179:0001]
LightdmGreeterLog: Failed to launch bus: Failed to connect to session bus
Lsusb:
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
+ Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
+ Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
+ Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: TOSHIBA DynaBook SS 2000 DS80P/2
MarkForUpload: True
PccardctlIdent:
- Socket 0:
- no product info available
- Socket 1:
- no product info available
+ Socket 0:
+ no product info available
+ Socket 1:
+ no product info available
PccardctlStatus:
- Socket 0:
- no card
- Socket 1:
- no card
+ Socket 0:
+ no card
+ Socket 1:
+ no card
ProcEnviron:
- TERM=xterm
- PATH=(custom, no user)
- XDG_RUNTIME_DIR=<set>
- LANG=en_US.UTF-8
- SHELL=/bin/bash
+ TERM=xterm
+ PATH=(custom, no user)
+ XDG_RUNTIME_DIR=<set>
+ LANG=en_US.UTF-8
+ SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic
root=UUID=37ca0876-9a7b-4fc8-a23c-0337b5598734 ro text silent
SourcePackage: xorg
Symptom: display
Title: Xorg freeze
UpgradeStatus: Upgraded to saucy on 2013-10-20 (6 days ago)
dmi.bios.date: 04/25/2003
dmi.bios.vendor: TOSHIBA
dmi.bios.version: Version 1.40
dmi.board.name: Portable PC
dmi.board.vendor: TOSHIBA
dmi.board.version: Version A0
dmi.chassis.asset.tag: 0000000000
dmi.chassis.type: 10
dmi.chassis.vendor: TOSHIBA
dmi.chassis.version: Version 1.0
dmi.modalias:
dmi:bvnTOSHIBA:bvrVersion1.40:bd04/25/2003:svnTOSHIBA:pnDynaBookSS2000DS80P/2:pvrPP20080P2F62:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0:
dmi.product.name: DynaBook SS 2000 DS80P/2
dmi.product.version: PP20080P2F62
dmi.sys.vendor: TOSHIBA
version.compiz: compiz 1:0.9.10+13.10.20131011-0ubuntu1
version.libdrm2: libdrm2 2.4.46-1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.2.1-1ubuntu3
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.2.1-1ubuntu3
version.xserver-xorg-core: xserver-xorg-core 2:1.14.3-3ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu10
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.904-0ubuntu2
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau
1:1.0.9-2ubuntu1
xserver.bootTime: Sat Oct 26 22:58:27 2013
xserver.configfile: /etc/X11/xorg.conf
xserver.errors:
-
+
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
-
+
xserver.version: 2:1.14.3-3ubuntu2
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1245116
Title:
Laptop hangs on lid close
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1245116/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
