** Changed in: linux-raspi2 (Ubuntu)
Assignee: (unassigned) => Paolo Pisati (p-pisati)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1532217
Title:
Can't modprobe bcm2835-v4l2 to use RPi2
Chris, i just tested it on a clean system:
1) download and dd on a sd card this image:
http://people.canonical.com/~ppisati/ubuntu_embedded/ubuntu-embedded-16.04-raspi2.img.xz
2) sudo apt-get update
3) sudo apt-get install libraspberrypi-bin libraspberrypi-dev
4) modify
Edit /boot/firmware/config.txt (or wherever you mounted the vfat boot
partition) and comment out these lines:
#dtparam=i2c_arm=on
#dtparam=i2c_vc=on
and add these:
gpu_mem=128
start_x=1
Reboot the board, and install:
apt-get install libraspberrypi-bin libraspberrypi-dev
Then, if the camera
This still does not work for me. I did a clean dd of the ubuntu-embedded image,
and followed the above steps and it did not work. I was unable to get a a
snapshot using raspistill. Nor was I able to use raspi-config to 'enable
camera'.
$ sudo raspistill -o foobar.jpg
mmal: No data received from