[Bug 1541247] Re: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display
** Description changed: - $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x600 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 + $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x600 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600 scaling TV1 by 1.333750x1.00 scaling TV1 by 1.333750x1.00 crtc 0: disable crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 Expected result: the whole framebuffer fits on TV1. Actual result: Image is zoomed vertically, and, low part of framebuffer is cut. Horizontally ok. + Reproduceable: sometimes - However, sometimes this works fine, at least, if I set - --set 'top margin' 15 --set 'left margin' 40 --set 'bottom margin' 25 --set 'right margin' 40 - for output TV1. And then the following workaround does not work. Also the image in TV may be sometimes offset so that there is black area on top and left. All in all setting graphics works unreliably. Even reboot may not help. + However, sometimes this works fine. The "crtc 0: disable" line does not + appear always. And then the following workaround does not work. Also the + image in TV may be sometimes offset so that there is black area on top + and left. All in all setting graphics works unreliably. Even reboot may + not help. Workaround: - $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x720 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 + $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x720 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600 scaling TV1 by 1.333750x1.20 scaling TV1 by 1.333750x1.20 xrandr: specified screen 1067x600 not large enough for output TV1 (1067x720+0+0) crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 However, then e.g. VLC full screen playback cuts lower part of video. - $ lspci -v|grep -A 15 VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d020 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c000 (32-bit, prefetchable) [size=256M] Memory at d030 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0 Memory at d028 (32-bit, non-prefetchable) [size=512K] Capabilities: Physical aspect ratio of TV is 16:9. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: x11-xserver-utils 7.7+4ubuntu1 ProcVersionSignature: Ubuntu 4.2.0-27.32-generic 4.2.8-ckt1 Uname: Linux 4.2.0-27-generic x86_64 ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 CurrentDesktop: XFCE Date: Wed Feb 3 09:46:28 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2016-01-24 (9 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: x11-xserver-utils UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1541247 Title: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/x11-xserver-utils/+bug/1541247/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1541247] Re: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display
** Also affects: xserver-xorg-video-intel (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1541247 Title: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/x11-xserver-utils/+bug/1541247/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1541247] Re: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display
** Description changed: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x600 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.00 scaling TV1 by 1.333750x1.00 crtc 0: disable crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 Expected result: the whole framebuffer fits on TV1. Actual result: Image is zoomed vertically, and, low part of framebuffer is cut. Horizontally ok. However, sometimes this works fine, at least, if I set --set 'top margin' 15 --set 'left margin' 40 --set 'bottom margin' 25 --set 'right margin' 40 - for output TV1. And then the following workaround does not work. Also the image in TV may be sometimes offset so that there is black area on top and left. All in all setting graphics works unreliably. + for output TV1. And then the following workaround does not work. Also the image in TV may be sometimes offset so that there is black area on top and left. All in all setting graphics works unreliably. Even reboot may not help. Workaround: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x720 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.20 scaling TV1 by 1.333750x1.20 xrandr: specified screen 1067x600 not large enough for output TV1 (1067x720+0+0) crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 + + However, then e.g. VLC full screen playback cuts lower part of video. + $ lspci -v|grep -A 15 VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d020 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c000 (32-bit, prefetchable) [size=256M] Memory at d030 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0 Memory at d028 (32-bit, non-prefetchable) [size=512K] Capabilities: Physical aspect ratio of TV is 16:9. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: x11-xserver-utils 7.7+4ubuntu1 ProcVersionSignature: Ubuntu 4.2.0-27.32-generic 4.2.8-ckt1 Uname: Linux 4.2.0-27-generic x86_64 ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 CurrentDesktop: XFCE Date: Wed Feb 3 09:46:28 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2016-01-24 (9 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: x11-xserver-utils UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1541247 Title: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/x11-xserver-utils/+bug/1541247/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1541247] Re: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display
** Description changed: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x600 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.00 scaling TV1 by 1.333750x1.00 crtc 0: disable crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 Expected result: the whole framebuffer fits on TV1. Actual result: Image is zoomed vertically, and, low part of framebuffer is cut. Horizontally ok. However, sometimes this works fine, at least, if I set --set 'top margin' 15 --set 'left margin' 40 --set 'bottom margin' 25 --set 'right margin' 40 - for output TV1. And then the following workaround does not work. Also the image in TV may be sometimes offset so that there is black are on top and left. All in all setting graphics works unreliably. + for output TV1. And then the following workaround does not work. Also the image in TV may be sometimes offset so that there is black area on top and left. All in all setting graphics works unreliably. Workaround: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x720 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.20 scaling TV1 by 1.333750x1.20 xrandr: specified screen 1067x600 not large enough for output TV1 (1067x720+0+0) crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 $ lspci -v|grep -A 15 VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d020 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c000 (32-bit, prefetchable) [size=256M] Memory at d030 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0 Memory at d028 (32-bit, non-prefetchable) [size=512K] Capabilities: Physical aspect ratio of TV is 16:9. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: x11-xserver-utils 7.7+4ubuntu1 ProcVersionSignature: Ubuntu 4.2.0-27.32-generic 4.2.8-ckt1 Uname: Linux 4.2.0-27-generic x86_64 ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 CurrentDesktop: XFCE Date: Wed Feb 3 09:46:28 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2016-01-24 (9 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: x11-xserver-utils UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1541247 Title: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/x11-xserver-utils/+bug/1541247/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1541247] Re: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display
** Description changed: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x600 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.00 scaling TV1 by 1.333750x1.00 crtc 0: disable crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 Expected result: the whole framebuffer fits on TV1. Actual result: Image is zoomed vertically, and, low part of framebuffer is cut. Horizontally ok. + + However, sometimes this works fine, at least, if I set + --set 'top margin' 15 --set 'left margin' 40 --set 'bottom margin' 25 --set 'right margin' 40 + for output TV1. And then the following workaround does not work. Workaround: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x720 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.20 scaling TV1 by 1.333750x1.20 xrandr: specified screen 1067x600 not large enough for output TV1 (1067x720+0+0) crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 $ lspci -v|grep -A 15 VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d020 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c000 (32-bit, prefetchable) [size=256M] Memory at d030 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0 Memory at d028 (32-bit, non-prefetchable) [size=512K] Capabilities: Physical aspect ratio of TV is 16:9. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: x11-xserver-utils 7.7+4ubuntu1 ProcVersionSignature: Ubuntu 4.2.0-27.32-generic 4.2.8-ckt1 Uname: Linux 4.2.0-27-generic x86_64 ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 CurrentDesktop: XFCE Date: Wed Feb 3 09:46:28 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2016-01-24 (9 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: x11-xserver-utils UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1541247 Title: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/x11-xserver-utils/+bug/1541247/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1541247] Re: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display
** Description changed: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x600 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.00 scaling TV1 by 1.333750x1.00 crtc 0: disable crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 Expected result: the whole framebuffer fits on TV1. Actual result: Image is zoomed vertically, and, low part of framebuffer is cut. Horizontally ok. However, sometimes this works fine, at least, if I set - --set 'top margin' 15 --set 'left margin' 40 --set 'bottom margin' 25 --set 'right margin' 40 - for output TV1. And then the following workaround does not work. + --set 'top margin' 15 --set 'left margin' 40 --set 'bottom margin' 25 --set 'right margin' 40 + for output TV1. And then the following workaround does not work. Also the image in TV may be sometimes offset so that there is black are on top and left. All in all setting graphics works unreliably. Workaround: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x720 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.20 scaling TV1 by 1.333750x1.20 xrandr: specified screen 1067x600 not large enough for output TV1 (1067x720+0+0) crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 $ lspci -v|grep -A 15 VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d020 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c000 (32-bit, prefetchable) [size=256M] Memory at d030 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3801 Flags: bus master, fast devsel, latency 0 Memory at d028 (32-bit, non-prefetchable) [size=512K] Capabilities: Physical aspect ratio of TV is 16:9. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: x11-xserver-utils 7.7+4ubuntu1 ProcVersionSignature: Ubuntu 4.2.0-27.32-generic 4.2.8-ckt1 Uname: Linux 4.2.0-27-generic x86_64 ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 CurrentDesktop: XFCE Date: Wed Feb 3 09:46:28 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2016-01-24 (9 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: x11-xserver-utils UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1541247 Title: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/x11-xserver-utils/+bug/1541247/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1541247] Re: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display
** Description changed: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x600 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.00 scaling TV1 by 1.333750x1.00 crtc 0: disable crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 - Expected resutl: the whole framebuffer fits on TV1. - Actual resutl: Image is zoomed vertically, and, low part of framebuffer is cut. Horizontally ok. + Expected result: the whole framebuffer fits on TV1. + Actual result: Image is zoomed vertically, and, low part of framebuffer is cut. Horizontally ok. Workaround: $ xrandr --verbose --fb 1067x600 --output TV1 --set mode PAL --mode 800x600 --rate 50.00 --scale-from 1067x720 --output LVDS1 --mode 640x480 --pos 0x0 --panning 1067x600+0+0/1067x600+0+0 scaling TV1 by 1.333750x1.20 scaling TV1 by 1.333750x1.20 xrandr: specified screen 1067x600 not large enough for output TV1 (1067x720+0+0) crtc 0: 800x600 50.00 +0+0 "TV1" crtc 1: 640x480 59.94 +0+0 "LVDS1 $ lspci -v|grep -A 15 VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) - Subsystem: Lenovo Device 3801 - Flags: bus master, fast devsel, latency 0, IRQ 16 - Memory at d020 (32-bit, non-prefetchable) [size=512K] - I/O ports at 1800 [size=8] - Memory at c000 (32-bit, prefetchable) [size=256M] - Memory at d030 (32-bit, non-prefetchable) [size=256K] - Expansion ROM at [disabled] - Capabilities: - Kernel driver in use: i915 + Subsystem: Lenovo Device 3801 + Flags: bus master, fast devsel, latency 0, IRQ 16 + Memory at d020 (32-bit, non-prefetchable) [size=512K] + I/O ports at 1800 [size=8] + Memory at c000 (32-bit, prefetchable) [size=256M] + Memory at d030 (32-bit, non-prefetchable) [size=256K] + Expansion ROM at [disabled] + Capabilities: + Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) - Subsystem: Lenovo Device 3801 - Flags: bus master, fast devsel, latency 0 - Memory at d028 (32-bit, non-prefetchable) [size=512K] - Capabilities: + Subsystem: Lenovo Device 3801 + Flags: bus master, fast devsel, latency 0 + Memory at d028 (32-bit, non-prefetchable) [size=512K] + Capabilities: Physical aspect ratio of TV is 16:9. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: x11-xserver-utils 7.7+4ubuntu1 ProcVersionSignature: Ubuntu 4.2.0-27.32-generic 4.2.8-ckt1 Uname: Linux 4.2.0-27-generic x86_64 ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 CurrentDesktop: XFCE Date: Wed Feb 3 09:46:28 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2016-01-24 (9 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: x11-xserver-utils UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1541247 Title: Zooms image on TV horizontally so that the bottom part of framebuffer does not fit in display To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/x11-xserver-utils/+bug/1541247/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs