** Changed in: mandriva
Status: Confirmed = Unknown
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/193970
Title:
iwl3945 | iwl4965: Wireless can't be activated after disabling kill
switch
** Changed in: mandriva
Importance: Unknown = Medium
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/193970
Title:
iwl3945 | iwl4965: Wireless can't be activated after disabling kill
switch
--
This bug affects me on a Dell Latitude D830 on karmic with a 4965 AGN card.
Uname output:
Linux 2.6.32-22-generic #60-Ubuntu SMP Thu May 27 02:41:03 UTC 2010 x86_64
GNU/Linux.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
Linux 2.6.32-13-generic #18-Ubuntu SMP Fri Feb 12 11:03:56 UTC 2010
x86_64 GNU/Linux, this bug affects me to, and the solution does not
work.
This bug is similar
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/365321
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or
AGN
the problem still affects me on an Acer Travelmate 292,
9.10 (2.6.31-17)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2]
Network Connection (rev 05)
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
I can reactivate the wlan with the following command
sudo modprobe dell_laptop
sudo rmmod dell_laptop
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs,
The same problem is on SONY VAIO VGN-SZ7 after upgrade from 9.04
(2.6.28-16) to 9.10 (2.6.31.14).
2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux,
1.2.26ks
--
iwl3945 | iwl4965: Wireless
After upgrade from 9.04 (2.6.28-16) to 9.10 (2.6.31.14) I have same problem.
When wlan switch is off before booting I am able to activate wlan successfully
inside a session. But if I boot with enabled wlan switch - wlan will not work
and I can not disable/enable wlan settings
Dell Vostro 1520
This bug is still present on Karmic alpha 6 on my Sony Vaio SZ650 (Intel
4965 / iwlagn). If I shut down (or suspend, I think) with an enabled
killswitch, then boot (or resume), I cannot get my wifi to work until I
reboot with the killswitch disabled. The killswitch works properly if I
use it
since upgrade to kernel 2.6.28-14 yesterday and 2.6.28-15 today (ubuntu
9.04), the wlan switch again does not work anymore - despite the linux-
restricted-modules-xxx are installed. (it worked with 2.6.28-13)
from /var/log/messages:
XXX kernel: [ 752.989043] iwl3945: Radio Frequency Kill Switch
** Branch linked: lp:ubuntu/karmic/linux-ports
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Adding to the data for this bug.
It still shows up on Hardy 8.04 kernel: 2.6.24-24-generic
fully patched.
on a Compaq 8710p laptop with iwl4965
I _don't_ have the backport package installed.
dpkg --list | grep backport yields nothing.
Symptoms and description are as others have reported.
This bug was fixed in the package linux - 2.6.27-14.33
---
linux (2.6.27-14.33) intrepid-proposed; urgency=low
[Stefan Bader]
* Fix FTBS due to a mysteriously missing ABI directory.
linux (2.6.27-14.32) intrepid-proposed; urgency=low
[Stefan Bader]
* Rebuild of
i see. since i got linux-restricted-modules-generic-2.6.28-12 via apt
WIFI works fine again! :)
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which
for me, the bug was fixed on jaunty until kernel 2.6.28-11. but since
2.6.28-12 the problem reappeared (but the package linux-restricted-
modules-generic was not installed because the dependency to linux-
restricted-modules-generic-2.6.28-12 can no be fulfilled).
the kill switch is not working as
Sure thing. This may be a Dell XPS specific issue.
I found a typo in the hal killswitch scripts, affecting the dell-part of
this script: Bug #368553
And have opened a new bug report for my specific case here: Bug #368556
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill
This bug persists for me in Jaunty final release.
07:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
This is also fixed for me (Dell Latitude D430).
Motin, can you please open a new bug with ubuntu-bug linux? I think
this is fixed for most people, and this bug has many duplicates. Let's
handle the remaining cases in a separate report, to avoid spamming so
many people on this one. Thank you!
**
This is not fixed in Jaunty final, at least not for XPS M1330. After
having the killswitch enabled (wifi disabled) when waking up from
resume, I need to right-click network manager, deactive wireless, then
activate it again. Only then the wireless LED lights up again and
wireless networks are
For me (HP Pavilion dv2352ea's iwl3945) the bug is fixed in jaunty
final. Completely, even when hibernating.
Thank you very much, whoever hacked/released the patch!
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received
I could be wrong, but I don't think this is working properly for me in
jaunty beta.
I have a touch-button on my hp6710b that enables/disables both wifi and
bluetooh. In windows I have disabled wifi in addition to this, meaning
the physical button only enables bluetooth atm. In this state my
There is still a small problem regarding this bug in jaunty beta.
If I disable the wifi before suspend, when I resume it doesn't activate anymore.
The only solution is to:
rmmod iwlagn
modprobe iwlagn
It's better to open a new bug?
--
iwl3945 | iwl4965: Wireless can't be activated after
On Tue, Apr 07, 2009 at 05:12:06AM -, TiloBunt wrote:
Code:
options iwl3945 disable=0
options acer-wmi wireless=1
This sounds like bug 319825, which should be fixed (at least for some Acer
models) in current Jaunty.
--
- mdz
** Also affects: hal (Ubuntu Jaunty)
Importance: Medium
Workaround for Acer Notebook user
to enable the wireless by configuring the file /etc/modprobe.d/options
Please follow this procedure:
Step 1: Open Terminal from Applications-Accessories-
Terminal
Step 2: Run the following command (copy-paste the line below to the
Terminal then hit enter)
So far the workaround with disabling network and reenabling it via nm-applet
worked but,
now I just updated to kernel 2.6.27-14-generic and when i do it now I always
encounter a kernel panic :-((. Any suggestion what could have caused this
regression?
--
iwl3945 | iwl4965: Wireless can't be
I have just upgraded linux-image, linux-headers, and linux-restricted-
modules to 2.6.27-14. So far I have followed the scenario I described in
my comment above and killswitch has been working as expected. I'll
continue to play with it later today and if the improbable happens, and
something goes
I have similar observations:
- Enabled proposed
- Upgraded with the latest kernel, and modules available there
- Rebooted with the newer kernel
- Disabled wifi by engaging the killswitch
- Waited 30 - 40 sec and disengaged killswitch
- Wireless connection *was not* restored
- Rebooted again with
The kernel image is not yet in intrepid-proposed. Wait until it's built
and you get an update, the needed package is linux-
image-2.6.27-14-generic.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug
I've just installed the linux-image-2.6.27-14-generic and all the other
kernel packages, and the switch is not working like I reported in
https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-
modules-2.6.24/+bug/193970/comments/156
--
iwl3945 | iwl4965: Wireless can't be activated after
For me the bug still exists, in Intrepid, like before. I can't enable wi-fi
after switch it off, even if the switch is off when booting.
Asus W5F - Intel WM3945abg
I can give more information about my system if any one find it useful.
--
iwl3945 | iwl4965: Wireless can't be activated after
I've just enable proposed repository, updated and rebooted and the bug
still persists for me in Intrepid. Running HP 6720s with intel 3945...
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification
Accepted intrepid into linux-proposed; please test and give feedback
here. Please see https://wiki.ubuntu.com/Testing/EnableProposed for
documentation how to enable and use -proposed. Thank you in advance!
** Tags added: verification-needed
--
iwl3945 | iwl4965: Wireless can't be activated
** Changed in: linux (Ubuntu Intrepid)
Status: In Progress = Fix Committed
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Description changed:
Normally, the wifi kill switch of my Dell D620 is enabled because I
don't need wifi often. If the system was booted with an enabled kill
switch, then I can't reactive the wireless interface any more. Only a
reboot with deactivated kill switch enables the interface
I can confirm that this is fixed in the latest Jaunty kernel.
Cheers devs.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
** CVE removed: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2009-0029
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
This bug was fixed in the package linux - 2.6.28-9.29
---
linux (2.6.28-9.29) jaunty; urgency=low
[ Andy Whitcroft ]
* link-headers -- only link directories which do not already exist
- LP: #315252
[ Daniel Marjamäki ]
* SAUCE: (drop after 2.6.28) netxen: fix memory
Nicolò, yes this bug originally refers only to iwl3945 and iwl4965
drivers.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Yes, but I also had this issue with my 5100 (my bug was duplicated to
this), so I thought it could be fixed for you too
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member
We have a potential patch for the iwl3945 side of this issue. I have
built some test kernels for both Intrepid and Jaunty with that patch
applied. If those of you who are affected could try those kernels and
report back here that would be helpful. These kernels are at the URLs
below:
Works perfectly now on my Fujitsu-Siemens Amilo Pi 1536 laptop. Thanks a
lot!!!
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Works here too, Lenovo R61. Cheers. Will this make it into Jaunty?
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
@Whoopie -- did you test intrepid or jaunty kernels there?
@Tom Vetterlein -- I believe you are on Jaunty? Correct?
Could anyone else who tests please report the version you tested
against.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
I am on Jaunty yes. Sorry for omitting that.
Thanks again.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Changed in: linux (Ubuntu)
Assignee: Tim Gardner (timg-tpi) = Andy Whitcroft (apw)
Status: Confirmed = In Progress
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you
Andy, it works for me on Acer 6292 with Jaunty with all updates!!!
Thanks a lot
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Based on the positive feedback for Jaunty I have commited this change
there, and it should make the next kernel upload and the next Alpha.
** Changed in: linux (Ubuntu)
Status: In Progress = Fix Committed
** Changed in: linux (Ubuntu Intrepid)
Status: Won't Fix = In Progress
--
Same Here, worked with Intrepid x86 on Thinkpad R60, thanks Andy
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Yea, works for me too (Intrepid) on my Fujitsu Siemens Amilo Si1520 with
iwl3945. Great work Andy.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs,
@Andy: Sorry, I tested under Intrepid.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
fixed for me in linux-image 2.6.28-8.27 (no need to install the backport
modules)
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Nicolò, could you please describe your configuration? you have iwl3945
or 4965?
and next, have you tested it by fast switching killswitch or wait
sometime for WLANs to disappear from networkmanager menu before trying
to reenable it?
--
iwl3945 | iwl4965: Wireless can't be activated after
For me dmesg look like:
1. System booted. WLAN led lights on. Network manager discovers WLANs.
2. I press WLAN button WLAN led lights off.
3. Then I immidiately press it again.
WLAN led lights on. Network manager continue to discover WLANs.
dmesg looks like:
[ 101.771416] iwl3945: Radio
Some information about this bug:
[PATCH 5/5] iwl3945: fix deep sleep when removing the driver.: msg#00098
linux-wireless
http://osdir.com/ml/linux-wireless/2009-01/msg00098.html
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
Current iwl3945 version in Jaunty with all updates:
sudo modinfo iwl3945
filename:
/lib/modules/2.6.28-8-generic/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko
firmware: iwlwifi-3945-1.ucode
license:GPL
author: Copyright(c) 2003-2008 Intel Corporation
version:
I have iwl3945 with all updates too. Same problem. If the switch is done
quickly, it works. If not, it won't come back on.
Also, if it is off during boot, it can't be enabled. The above only
happens if it's switched on at boot time.
--
iwl3945 | iwl4965: Wireless can't be activated after
my modules are iwlcore and iwlang. the card is intel 5100. Yes, I have
waited enough time. The fix might only be for my device and not yours?
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification
I too can confirm this on latest jaunty.
As I said before, I resolve this every time by running:
sudo ifconfig wlan0 up;sleep 2;sudo iwlist wlan0 scan
Is there any chance this is not kernel, but something else? (dbus,
network-manager)
--
iwl3945 | iwl4965: Wireless can't be activated after
No, the problem appears to be that the driver never sees that the
killswitch has been re-enabled. Therefore, it never tells n-m to
reconnect.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification
For those of you on Jaunty there is a new linux-backport-modules which
includes updated drivers for this card. If those who can test this
could do so and report back here that would be very helpful.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
After installing that package, the iwlwifi module does no more load...
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
i also lost my intel wifi 4965 abgn driver
wont even show up on iwconfig
add to reboot into kernel -7, to have wifi.
please revert this ASAP.
thanks
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug
@Nicolo, @BUGabundo -- seems there is an issue with the new linux-
backports-modules package, whcih is being worked on right now. If you
were not using linux-backports-modules before I requested you test it
you should be able to remove it to restore your wifi.
I will let you know when the issue
I have reviewed Jaunty Alpha 5 release notes and have not found any
information about this bug, that i have seen for example in 8.10 rel
notes?
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification
The ubuntu-release-notes project refers to the release notes published
for a final release, not to the technical overviews prepared for alpha
milestones. The issue is documented in the 8.10 release notes. For
9.04 there is still the hope that this bug will be resolved before
release.
--
I tested the 2.6.29 kernel which has the same problem
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
still does not work in jaunty with all updates
** Changed in: linux (Ubuntu)
Status: Fix Released = Confirmed
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member
** Changed in: ubuntu-release-notes
Status: Fix Released = Confirmed
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Please don't touch the ubuntu-release-notes task. This issue *is*
documented in the release notes, which means the release is fixed.
** Changed in: ubuntu-release-notes
Status: Confirmed = Fix Released
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
This is not fixed for me in Jaunty either.
Tried 2.6.28 and the unsupported 2.6.29 too.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is
This still isn't fixed for me :(
I start the machine with wifi off, then try to put it on... and it
doesn't work. Bluetooth comes on, however.
Currently running 2.6.28-8.26 in Jaunty.
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
I guess theres one more Me Too with me.
Regardless of the kill switch settings I can't get any network as dhcpcd
/ dhclient won't get me an address regardless. Using the rmmod /
modprobe steps above will make the option in network-manager highlighted
instead of grayed out but touching and of the
Thanks to Tim for the commit.
Will this be available as backport for Intrepid? As Telorn said this ist
quite annoying!
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member
Or for Hardy, which has Long Term Support until April 2011?
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Can confirm this on Fujitsu Siemens Amilo Si1520 with iwl3945 running
Intrepid. The workaround I have to do is:
1) rmmod iwl3945
2) Activate radio using kill switch button.
3) modprobe iwl3945
All other attempts, even rebooting, hasn't worked.
Please find a way to get this fixed for Jaunty for
This bug was fixed in the package linux - 2.6.28-8.23
---
linux (2.6.28-8.23) jaunty; urgency=low
[ Andy Whitcroft ]
* include the kernel configuration in the sub-flavour images
- LP: #328859
[ Tim Gardner ]
* Revert SAUCE: (drop after 2.6.28) [eCryptfs] Regression in
http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-
jaunty.git;a=commit;h=6748b0809789a4f617455672491839e05a066bf7
** Changed in: linux (Ubuntu)
Assignee: Andy Whitcroft (apw) = Tim Gardner (timg-tpi)
Status: Triaged = Fix Committed
--
iwl3945 | iwl4965: Wireless can't be activated after
Waiting for Jaunty Alpha 5. Now I have 9.04 with all updates, when it
starts it enables WLAN, but if I disable it using WLAN button
(killswitch, but on my laptop it is button with no positioning), it
still can't be reactivated with WLAN button. So, next, I think, that it
isn't correct behavior to
Is this bug going to be fixed in iwl3945 for jaunty?
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
13 dupes and countless affects me toos and yet it is classified as
won't fix. I know this is a volunteer effort for the most part, but
this is a pretty serious pain that affects a lot of people. If there is
a way to fix it, I want to lend my voice to the message Please fix this
bug!! It drives
This is not fixed for iwl3945 chipsets in jaunty, because the iwlagn
driver does *not* handle these chipsets in 2.6.28 - the driver is still
split out. So it would be nice to have a fix for the iwl3945 branch of
the family.
** Changed in: linux (Ubuntu)
Status: Fix Released = Triaged
I have just downloaded Jaunty (seems to be that it is Alpha-2) and
installed all updates, but killswitch still doesn't work. If there any
time estimates, when it will be working to test it? should we set state
back to not fixed?
so, next, there is no workaround to make killswitch work properly.
We have been able to backport the fixes for the iwl4965 and later
drivers. There are no fixes in later drivers for the iwl3945 as those
have been subsumed into the common intel wireless driver, which brings
this fix automatically for those cards, and they should therefore work
correctly in
I don't know if it's the same bug, but I still have this problem, on
8.04
Thinkpad x60 tablet
2.6.24-23-generic
iwl3945
for me, however, when switched off then on, the iwl3945 module actually hangs
in a 'disk sleep',
additionally, attempts to 'sudo modprobe -r iwl3945' get hung in 'disk sleep'
I also have the same problem on a Haier W62-N Notebook with Ubuntu 8.10
and kernel 2.6.27-9-generic.
This notebook always starts up with wireless disabled.
After i enable wireless with soft switch nothing happens. I have to type
sudo rmmod iwl3945; sudo modprobe iwl3945 in the terminal and then
Michal Pěnka, it would be better to suggest them to use Hardy :) This
time LTS have been really stable if we talk about wifi support.
Anyway, this bug is still in Jaunty Alpha 3 Live CD. I will try to
install it, but if it isn't fixed, milestone should be moved to alpha 3
or 4.
--
iwl3945 |
I have HP 6510b with Intel iwl3945 and this bug is really annoying. I,
myself, can handle this bug with rmmod modprobe workaround, but tell
other people :(
What's worse, few friends switched back to Windows :(
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
I confirm this bug on 8.10 (Dell Latitude D830).
$ uname -r
2.6.27-9-generic
$ lspci | grep -i wireless
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan]
Network Connection (rev 02)
Both workarounds (1 and 2) works for me.
--
iwl3945 | iwl4965: Wireless can't be
On Tue, Jan 6, 2009 at 18:05, Andreas Gnau ron...@rondom.de wrote:
I can confirm that this is fixed for me (iwl3945) in jaunty, but not in
intrepid.
So we have this bug since 8.10, thus october 2008. I'm quite suprised to see
it's not yet solved.
Because of this annoying bug I've switched my
** Bug watch added: Mandriva Linux #45311
http://qa.mandriva.com/show_bug.cgi?id=45311
** Also affects: mandriva via
http://qa.mandriva.com/show_bug.cgi?id=45311
Importance: Unknown
Status: Unknown
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
** Changed in: mandriva
Status: Unknown = Confirmed
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I can confirm that this is fixed for me (iwl3945) in jaunty, but not in
intrepid.
The error seems to lie in userspace, though. Installing the linux-
image-2.6.28-3-generic and linux-firmware from jaunty under intrepid
doesn't change anything.
--
iwl3945 | iwl4965: Wireless can't be activated
this but affects me to. (Toshiba Satelite P100)
$ uname -a
Linux me 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686 GNU/Linux
$ lspci | grep -i wireless
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan]
Network Connection (rev 02)
this worked for me to enable
I'm suffering this bug too, here are some information about my case:
Hardware :
Laptop, Sony Vaio VGN-FE770G
Software :
Ubuntu 8.10, installed from scracth, updated to now
Uname -a:
Linux halley 2.6.27-10-generic #1 SMP Fri Nov 21 12:00:22 UTC 2008 i686
GNU/Linux
Since the arrival of the
** Changed in: linux (Ubuntu Intrepid)
Assignee: Tim Gardner (timg-tpi) = Andy Whitcroft (apw)
Status: Confirmed = In Progress
** Changed in: linux (Ubuntu)
Status: Confirmed = In Progress
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
I have tried to port the changes to the iwl4965 to the iwl3945 driver.
I have built some kernels based on the Intrepid -proposed kernel. If
someone who has the iwl3945 hardware could test them. Specifically the
booting with the rf kill switch disabled and then see if turning it off
then allows
New to the thread, but I'm having similar issues and tried your kernel
build. Didn't seem to help. My particular oddity is that once I enable
the killswitch (turn off wireless), I can't turn it back on again. I'll
admit that I'm having trouble nailing down exactly the steps to reenable
it, but
Hello. I can confirm this and reproduce it anytime.
Scenario:
1. Wireless is working
2. Disable via NetworkManager
3. Wireless is off
4. Enable via NetworkManager
5. Wireless is working
6. Press killswitch
7. NetworkManager takes a while to realize that wireless is supposed to be off
8. cat
I confirm, that bug wasn't fixed for iwl3945
** Changed in: linux (Ubuntu)
Status: Fix Committed = Confirmed
--
iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
https://bugs.launchpad.net/bugs/193970
You received this bug notification because you are a member of
On Fri, Nov 14, 2008 at 12:29:33AM -, Andy Whitcroft wrote:
@Matt Zimmerman
This bug only manifests itself if the driver is loaded when the switch
is on. If the driver is loaded when the switch is off then further
on/off operations are successful.
Correct.
Actually, even if i booted
1 - 100 of 176 matches
Mail list logo
