[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Launchpad has imported 45 comments from the remote bug at https://bugzilla.redhat.com/show_bug.cgi?id=519176. If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. On 2009-08-25T14:36:37+00:00 Pedro wrote: Description of problem: Bluetooth detection and use is very unstable with gnome-bluetooth and/or blueman. lsusb: Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) When I insert it, this shows up in /var/log/messages: Aug 25 15:28:31 localhost kernel: usb 3-1: new full speed USB device using uhci_hcd and address 4 Aug 25 15:28:31 localhost kernel: usb 3-1: New USB device found, idVendor=0a12, idProduct=0001 Aug 25 15:28:31 localhost kernel: usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Aug 25 15:28:31 localhost kernel: usb 3-1: configuration #1 chosen from 1 choice Aug 25 15:28:31 localhost bluetoothd[1677]: HCI dev 0 registered Aug 25 15:28:31 localhost bluetoothd[1677]: HCI dev 0 up Aug 25 15:28:31 localhost bluetoothd[1677]: Starting security manager 0 Aug 25 15:28:36 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:28:41 localhost bluetoothd[1677]: Can't write inquiry mode for /org/bluez/1677/hci0: Connection timed out (110) Aug 25 15:28:41 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:28:46 localhost bluetoothd[1677]: Can't write class of device: Connection timed out (110) Aug 25 15:28:46 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:28:51 localhost bluetoothd[1677]: Can't write class of device: Connection timed out (110) Aug 25 15:28:51 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:28:56 localhost bluetoothd[1677]: Can't write class of device: Connection timed out (110) Aug 25 15:28:56 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:29:01 localhost bluetoothd[1677]: Can't write class of device: Connection timed out (110) Aug 25 15:29:01 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:29:06 localhost bluetoothd[1677]: Can't write class of device: Connection timed out (110) Aug 25 15:29:06 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:29:11 localhost bluetoothd[1677]: Can't write class of device: Connection timed out (110) Aug 25 15:29:11 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:29:16 localhost bluetoothd[1677]: Can't write class of device: Connection timed out (110) Aug 25 15:29:16 localhost bluetoothd[1677]: probe failed with driver input-headset for device /org/bluez/1677/hci0/dev_00_1B_59_52_99_41 Aug 25 15:29:16 localhost bluetoothd[1677]: Adapter /org/bluez/1677/hci0 has been enabled Aug 25 15:29:16 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:29:21 localhost bluetoothd[1677]: Sending getting name command failed: Connection timed out (110) Aug 25 15:29:21 localhost kernel: hci_cmd_task: hci0 command tx timeout Aug 25 15:29:26 localhost bluetoothd[1677]: Can't read class of device on hci0: Connection timed out (110) Aug 25 15:29:26 localhost kernel: hci_cmd_task: hci0 command tx timeout [root@portatil ~]# hciconfig hci0: Type: USB BD Address: 00:1F:81:00:02:50 ACL MTU: 1021:4 SCO MTU: 180:1 UP RUNNING RX bytes:676 acl:0 sco:0 events:21 errors:0 TX bytes:327 acl:0 sco:0 commands:32 errors:12 [root@portatil ~]# hcitool scan Scanning ... Inquiry failed: Connection timed out [root@portatil ~]# rpm -qa | grep blue gnome-bluetooth-2.27.5-1.fc11.i586 blueman-1.10-3.fc11.i586 pulseaudio-module-bluetooth-0.9.15-14.fc11.i586 gnome-bluetooth-libs-2.27.5-1.fc11.i586 bluez-libs-4.42-4.fc11.i586 pybluez-0.15-4.fc11.i586 bluez-4.42-4.fc11.i586 bluez-cups-4.42-4.fc11.i586 [root@portatil ~]# rpm -qa | grep kernel kerneloops-0.12-5.fc11.i586 kernel-PAE-2.6.30.5-32.fc11.i686 kernel-headers-2.6.29.6-217.2.8.fc11.i586 kernel-PAE-2.6.29.6-217.2.8.fc11.i686 kernel-firmware-2.6.30.5-32.fc11.noarch kernel-PAE-2.6.29.6-217.2.7.fc11.i686 [root@portatil ~]# lsmod | grep bt btusb 14312 2 bluetooth 81728 11 hidp,rfcomm,bnep,sco,l2cap,btusb Every attempt to scan for devices, via "hcitool scan", blueman or gnome- bluetooth applet results in a kernel: hci_cmd_task: hci0 command tx timeout in /var/log/messages. This bluetooth adaptor is a tiny one with no brand. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/268502/comments/253 On 2009-08-25T14:38:14+00:00 Pedro wrote: Forgot to say, this happens using kernel PAE-2.6.29.6-217.2.8 and PAE-2.6.30.5-32.fc11.i686. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/268502/comments/254
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Tags removed: verification-needed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) To manage notifications about this bug go to: https://bugs.launchpad.net/efikamx/+bug/268502/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: bluez (Debian) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) To manage notifications about this bug go to: https://bugs.launchpad.net/efikamx/+bug/268502/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
found the same issue still, #sudo hciconfig hci0 down nothing happened-- no logs in hcidump, shouldn't device should send any DOWN/reset command to controller ? #sudo hciconfig hci0 up from the hcidump logs , device host sends reset command but controller does not respond with hci command complete event bluez 4.101 kernel : 3.7.6 -Ashish -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) To manage notifications about this bug go to: https://bugs.launchpad.net/efikamx/+bug/268502/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
any news on this? I have ubuntu 12.10 and latest kernel: Linux Roller 3.2.0-39-generic #62-Ubuntu SMP Thu Feb 28 00:28:53 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) To manage notifications about this bug go to: https://bugs.launchpad.net/efikamx/+bug/268502/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
ubuntu 12.04 3.2.0-30-generic-pae lsusb Bus 004 Device 004: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter syslog Aug 25 12:38:28 apple bluetoothd[4008]: HCI dev 0 unregistered Aug 25 12:38:28 apple bluetoothd[4008]: Stopping hci0 event socket Aug 25 12:38:28 apple kernel: [103992.931026] usb 4-1: USB disconnect, device number 3 Aug 25 12:38:33 apple kernel: [103998.001247] usb 4-1: new full-speed USB device number 4 using uhci_hcd Aug 25 12:38:34 apple bluetoothd[4008]: HCI dev 0 registered Aug 25 12:38:34 apple bluetoothd[4008]: Listening for HCI events on hci0 Aug 25 12:38:35 apple kernel: [103999.292798] Bluetooth: hci0 command tx timeout Aug 25 12:38:54 apple bluetoothd[5430]: Can't init device hci0: Connection timed out (110) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) To manage notifications about this bug go to: https://bugs.launchpad.net/efikamx/+bug/268502/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Users of Cambridge Silicon Radio bluetooth devices should also be aware that there is another bug (launchpad #460743) that causes a problem with these devices. We may be experiencing compounded problems with those devices. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Still happens here, while we're stuck on 2.6.31, the userspace is Maverick at today's latest updates. It can't be an HCI 1.1 problem because this one is 2.1, and it has a default link policy :) hci0: Type: BR/EDR Bus: USB BD Address: 00:22:43:D9:D7:84 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:1009 acl:0 sco:0 events:34 errors:0 TX bytes:1103 acl:0 sco:0 commands:34 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BCM2046B1 Bluetooth Device' Class: 0x48 Service Classes: Capturing, Telephony Device Class: Miscellaneous, HCI Version: 2.1 (0x4) Revision: 0x50eb LMP Version: 2.1 (0x4) Subversion: 0x420e Manufacturer: Broadcom Corporation (15) Note that while GNOME insists the bluetooth module is Turned Off and doesn't turn it back on, all the userspace tools work fine (scanning for devices finds my PC across the room and a mouse..) We've also noticed that a very strange effect occurs: if there is a Bluetooth device actively pairing (a previously paired mouse for example) and it reconnects, everything is absolutely fine. If not, then it will do the hci0 command timeout... it seems to me that the Bluetooth device is basically being powered down or put in a suspend state by gnome-bluetooth if nothing is around (note; our 2.6.31 kernel has no USB autosuspend for btusb, so it must be a Bluetooth suspend command or something). Thoughts/opinions? ** Also affects: efikamx Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: linux Importance: Unknown = Medium -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: bluez (Debian) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I just tried the bluez 4.32 downgrade workaround on Ubuntu 10.10 and the basics work ok with Blueman but I hit a serious issue: Dec 21 21:14:21 linux bluetoothd[1375]: link_key_request (sba=00:22:43:D3:50:4D, dba=00:23:7F:81:DC:01) Dec 21 21:14:21 linux bluetoothd[1375]: link_key_request (sba=00:22:43:D3:50:4D, dba=00:23:7F:81:DC:01) Dec 21 21:14:22 linux pulseaudio[1919]: module-bluetooth-device.c: 00:23:7F:81:DC:01 is not known. Dec 21 21:14:22 linux pulseaudio[1919]: module.c: Failed to load module module-bluetooth-device (argument: address=00:23:7F:81:DC:01 profile=hsp sink_properties=device.icon_name=blueman card_properties=device.icon_name=blueman): initialization failed. Dec 21 21:14:22 linux bluetoothd[1375]: Badly formated or unrecognized command: AT+PLTWB=4 Dec 21 21:14:22 linux bluetoothd[1375]: Badly formated or unrecognized command: AT+PLTWN=1 Blueman's PulseAudio.py reports failure to load module-bluetooth- device (python call to C lib string). So no audio is possible but device is discovered ok. I'm using Plantronics Voyager Pro perhaps that is contributing to this workaround not being successful but FYI. I'm going to attempt installing the latest build of bluez next. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/268502 Title: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I have tested this on Karmic, Lucid and Maverick and continued to find this problem (timeout). After some googling and debugging, I found this bug #453885 specifying in detail and also the workaround from that bug. First, here's the workaround for those (like me) who want to get bluetooth working in Karmic / Lucid / Maverick: (I have tried this only on Karmic) 1. Downgrade your bluez package to the jaunty's version. (apt-get remove bluez, dpkg -i jaunty's 4.32-0ubuntu4 deb file) 2. You may want to install blueman, since gnome-bluetooth has other package dependencies) I have got it finally working consistently and without any issues, after this!!! My Device details: Bus 002 Device 015: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Based on my debugging and the info from bug #453885, I noticed the following: a. After the device initializes, /usr/sbin/bluetoothd is issuing the command to the device Read Default Link Policy Settings and there is no response from the device. This may happen because the device does not support and is a HCI Version 1.1 and/or bluez cannot handle such devices (and ignores the error that encountered by the prev Write Default Link Policy Settings). b. Even though there is no response to this command, there is no syslog error indicating a timeout. c. Most usually at this time, the hci0 interface would say UP RUNNING without any PSCAN. The moment you issue any action (hciconfig hci0 pscan or hcitool scan), the kernel issues a timeout syslog error -- to the previous Read Default Link Policy Settings command. d. After this, it goes haywire and nothing works. It has worked very few times though for me (scanning or browsing files) -- I am not entirely sure how -- but it stops working after sometime, and I suspect it would have hit the above scenario. However, during the entire period I was testing with hcidump on, it never worked and I can't say how the scanning was successful a time or two. e. bluez 4.32 did not issue the Read Default Link Policy Settings command, so this issue never comes up. f. To me the issue can be resolved by fixing bluez that should not issue Read Default Link Policy Settings command, for devices that does not support it (I am not very sure, but this may be due to HCI ver 1.1 on the device, which you can look at by hciconfig -a) and/or properly handle errors if the HCI command was not responded. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Workaround does not work for Lucid 32bit running 2.6.35.4 kernel. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I just tried the above workaround that I posted (going back to bluez-4.32) on plain Maverick amd64 (actually a Kubuntu 10.10 installation) and it did work (which was not working earlier with the same timeout problem). On Kubuntu, since bluedevil does not have any dependencies with bluez -- unlike gnome-bluetooth, downgrading bluez and testing was very easy. @Matt - Make sure you remove the module, stop bluetooth service, remove the device - downgrade bluez and put everything back. Or simply reboot and check. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I tried your workaround on Maverick @Srinivasa here. No luck here. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
@Srinivasa What kernel are you using? Others mentioned that this also seems to have an effect on the bug. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
@Matt - Karmic kernel version was amd64 2.6.31-16-generic. Maverick kernel version was amd64 2.6.35-22-generic. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I can confirm this issue for Ubuntu Lucid x86-64. I have a Super Mini Bluetooth 2.0 Adapter USB Dongle which is identified as Accel-OB2, Manufacturer Cambridge Silicon Radio (10). After booting the dongle works, but after a while the connection is lost and I get the time out message. I also tested whether an update from Bluez 4.60 to Bluez 4.70 solves the problem, but sadly it persits. The kernel I'm running is 2.6.32-24-generic #42-Ubuntu. The system is a clean basic ubuntu install (no desktop) with some additional server software (i.e., LAMP, Samba). -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Sorry to be the bearer of bad news, but the problem persists here as well. Please note that there is a bug in linux-firmware-nonfree. In order to get even this far, I had to manually symlink /lib/firmware/bcm2033-fw.bin and /lib/firmware/bcm2033-md.hex to BCM2033-FW.bin and BCM2033-MD.hex. Separate bug, separate issue, but just the same, if you're attempting to reproduce my results, that's something to keep in mind. This also required that I install bluez- compat. The hci device never gets created otherwise: [260752.445568] Bluetooth: Broadcom Blutonium firmware driver ver 1.2 [260752.445600] usb 1-5.4: firmware: requesting BCM2033-MD.hex [260752.461661] usb 1-5.4: firmware: requesting BCM2033-FW.bin [260752.464100] usbcore: registered new interface driver bcm203x [260753.012646] usb 1-5.4: USB disconnect, address 8 [260753.270167] usb 1-5.4: new full speed USB device using ehci_hcd and address 9 [260753.411283] usb 1-5.4: configuration #1 chosen from 1 choice [260753.757933] Bluetooth: L2CAP ver 2.14 [260753.757935] Bluetooth: L2CAP socket layer initialized [260753.810302] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [260753.810305] Bluetooth: BNEP filters: protocol multicast [260753.852462] Bridge firewalling registered [260753.937918] Bluetooth: SCO (Voice Link) ver 0.6 [260753.937920] Bluetooth: SCO socket layer initialized [260754.182674] Bluetooth: RFCOMM TTY layer initialized [260754.182690] Bluetooth: RFCOMM socket layer initialized [260754.182692] Bluetooth: RFCOMM ver 1.11 [260793.491079] hci_cmd_task: hci0 command tx timeout [260842.812029] hci_cmd_task: hci0 command tx timeout [260871.528140] hci_cmd_task: hci0 command tx timeout [260895.742432] hci_cmd_task: hci0 command tx timeout r...@shadwickt-desk:/usr/lib/bluetooth/plugins# hciconfig -a hci0: Type: USB BD Address: 00:40:05:D0:C1:AF ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING RX bytes:664 acl:0 sco:0 events:18 errors:0 TX bytes:98 acl:0 sco:0 commands:23 errors:0 Features: 0xff 0xfd 0x05 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT Can't read local name on hci0: Connection timed out (110) r...@shadwickt-desk:/usr/lib/bluetooth/plugins# hciutil dev hciutil: command not found r...@shadwickt-desk:/usr/lib/bluetooth/plugins# hcitool dev Devices: hci000:40:05:D0:C1:AF r...@shadwickt-desk:/usr/lib/bluetooth/plugins# lsusb | grep -i blue Bus 001 Device 009: ID 0a5c:2001 Broadcom Corp. Bluetooth Device -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Crap, forgot to mention - Lucid x86-64. Linux shadwickt-desk 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:21:58 UTC 2010 x86_64 GNU/Linux -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Same issue with usb BT dongle from Cambridge Silicon Radio (0a12:0001) and kernel 2.6.31 (x86_64 arch). $ uname -a Linux oem-desktop 2.6.31-22-generic #60-Ubuntu SMP Thu May 27 02:41:03 UTC 2010 x86_64 GNU/Linux $ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 05e3:0716 Genesys Logic, Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub $sudo dpkg -l |grep bluetooth ii bluetooth 4.51-0ubuntu2 Bluetooth support ii gnome-bluetooth 2.28.1-0ubuntu2 GNOME Bluetooth tools ii libbluetooth3 4.51-0ubuntu2 Library to use the BlueZ Linux Bluetooth sta ii libgnome-bluetooth7 2.28.1-0ubuntu2 GNOME Bluetooth tools - support library ii pulseaudio-module-bluetooth 1:0.9.19-0ubuntu4.1 Bluetooth module for PulseAudio sound server $ hcitool scan Scanning ... Inquiry failed: Connection timed out $tail /var/log/kern.log Aug 3 19:59:38 oem-desktop kernel: [ 194.740037] usb 4-4: new full speed USB device using ohci_hcd and address 4 Aug 3 19:59:38 oem-desktop kernel: [ 194.966352] usb 4-4: configuration #1 chosen from 1 choice Aug 3 20:01:26 oem-desktop kernel: [ 302.647758] hci_cmd_task: hci0 command tx timeout Aug 3 20:02:35 oem-desktop kernel: [ 371.505141] hci_cmd_task: hci0 command tx timeout -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Sorry, I am same user as comment #288 (previous one), I forgot: $ hciconfig -a hci0: Type: USB BD Address: 00:1F:81:00:02:50 ACL MTU: 1021:4 SCO MTU: 180:1 UP RUNNING PSCAN RX bytes:1477 acl:0 sco:0 events:54 errors:0 TX bytes:426 acl:0 sco:0 commands:39 errors:5 Features: 0xff 0x3e 0x0d 0x76 0x80 0x01 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Can't read local name on hci0: Connection timed out (110) $tail /var/log/kern.log Aug 3 20:06:28 oem-desktop kernel: [ 604.365742] hci_cmd_task: hci0 command tx timeout -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I am using Debian (squeeze/testing) and I am testing with kernel 2.6.32-5-486 . I am getting the timeout here, so I reckon this is still broken in Debian (squeeze) testing: # hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1F:81:00:01:1C ACL MTU: 1021:4 SCO MTU: 180:1 UP RUNNING RX bytes:330 acl:0 sco:0 events:8 errors:0 TX bytes:24 acl:0 sco:0 commands:16 errors:8 Features: 0xff 0x3e 0x09 0x76 0x80 0x01 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT Can't read local name on hci0: Connection timed out (110) # dmesg [127422.591465] hci_cmd_task: hci0 command tx timeout # lsusb Bus 003 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) I tried updating to bluez-4.69, which I downloaded from an upstream source and compiled myself, but the problem still persists. Mark. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
same issue on kernel 2.6.34. I've just tested. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I have the same problem distribution: Ubuntu 10.04 LTS kernel: 2.6.32-23-generic bluez 4.60-0ubuntu8 Bus 002 Device 004: ID 0a5c:2021 Broadcom Corp. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
No changes with last bluez version: Package: bluez State: installed Automatically installed: no Version: 4.65-0ubuntu1 I've also tried 4.66 - same problem. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Can confirm this - Lucid 10.04, Version: 4.60-0ubuntu8 2.6.32-22-generic Bus 005 Device 022: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Hmm... Same PC, another dongle (noname): Integrated System Solution Corp. Bluetooth Device - works like a charm. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I have same bug. Ubuntu 10.04, bluez 4.60-0ubuntu8. ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) # hciconfig -a hci0: Type: USB BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:0 acl:0 sco:0 commands:0 errors:0 dmesg: hci_cmd_task: hci0 command tx timeout btusb_intr_complete: hci0 urb e522e200 failed to resubmit (19) btusb_bulk_complete: hci0 urb e522ed00 failed to resubmit (19) btusb_bulk_complete: hci0 urb e522ea00 failed to resubmit (19) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
i had no problem with karmic. since update to lucid it doesn't work. i will try clean install, bue i doubt it will solve something -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
opposite experience here: finally works in Lucid for the first time ever, All seems to work, from file browsing and moving filesa across to one-click internet connection via mobile phone On 20/05/10 19:07, Selmi wrote: i had no problem with karmic. since update to lucid it doesn't work. i will try clean install, bue i doubt it will solve something -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
You don't have to reinstall to do a clean test. You can just boot the livecd session and test there. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Bug watch added: Red Hat Bugzilla #519176 https://bugzilla.redhat.com/show_bug.cgi?id=519176 ** Also affects: linux (Fedora) via https://bugzilla.redhat.com/show_bug.cgi?id=519176 Importance: Unknown Status: Unknown -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Bug is still in Lucid as 14May2010. If fix released, where it is? LP #460743 (https://bugs.edge.launchpad.net/fedora/+source/linux/+bug/460743) Should be merged with this one. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: linux (Ubuntu) Assignee: Brian Rogers (brian-rogers) = (unassigned) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
The latest I have tried is to uninstall gnome-bluetooth and install bluez-gnome. This allowed me to actually connect to the serial port with the '1234' code. It now shows up in BT manager with a totally different dialog graphics and commands, but it seems to be more robust at least for this pair. I still struggle with my iPhone bt pairing regardless of which interface I use (bluez-gnome or gnome-bluetooth). It connects sometimes, but rarely. The Nokia uses OBEX to allow me to see files and is very robust. It appears that this is still not correct as the title says. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Hi Keith :) I think you thought that by clicking on Fix Commited it would have an effect on your machine. I guess you know now that bug-report threads are a convenient way for people working on solving the bug to communicate with each other and keep track of progress and the current state of play. It helps when ordinary users like you me are able to say when a bug also exists on some other hardware or with a different version of Ubuntu but we do sometimes need a bit of direction to make sure we post into the right thread as the distinctions between bugs can seem a bit hazy to us. Hopefully we might be able to help beta-test a bug patch or few but my skills are not that advanced yet. Thanks for helping the Ubuntu community with this so far :) Good luck and regards from Tom :) PS sorry for using this thread as a personal message board. I just thought a bit of clarification might help -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Tom , Thanks! I did not think that the 'fix committed' worked like that, but was looking through the thread for a fix that someone said worked and a response saying, yes, worked for me, too. On a whim, I added the repository http://ppa.launchpad.net/blueman/ppa/ubuntu karmic main and then ran an update. It updated the packages and now I have been able to pair 2 phones with Karmic. The one allows PANU network connection and the other file transfers. I verified both worked last night. Now, I can pair to my phone with the PANU network, but cannot actually connect to that network... I will try a reboot, but that is very XP :-(. The phone and the computer show 'connected' and I selected connect to network, but the network manager will not connect, thiough it shows up in the dropdown list in the gnome applet. When the other phone comes home, I will see if I can transfer files again today. I tried a number of times last night and was successful via all means of file transfer. The next test is to see if I can connect my BT-serial port. IN summary, it still seems a bit iff-y. THe BTUSB dongle shows up as Accel-OB2 and it identifies as Cambridge ltd. The error in the syslog is: NetworkManager: WARN nm_device_bt_connect_cb(): Error connecting with bluez: Connection refused (111) If my serial port works, I'll post that here. Keith -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Well, I just tried the serial port. I do not think this is part of this bug, though, as it will not allow me to select the 1234 paring number that my serial port needs. What I did was click on the device in the BT manager, then select the pin option and select 1234 then clicked connect. At that time, the BT manager gives me a 6 digit random pin to type in on the serial port (which is impossible). If there is a command line way to do this, I am fine with thaty as well. I just want to be able to connect to the serial port. Oh, and, when I type hcitool scan at the command line, the serial port does not show up in the list, though it does in the BT manager. If this belongs somewhere else, let me know. Keith -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: linux (Ubuntu) Status: Fix Released = Fix Committed -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Please don't change bug statuses without explanation. ** Changed in: linux (Ubuntu) Status: Fix Committed = Fix Released -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Ok, I have read tons of these posts about defective bluetooth support in gnome/kernel. What is the fix? Can I try something? Do we have any idea as to when this may be pushed to the updater for 9.10? I have been patient for a couple of months and still nothing works. Dongle shows up, It can see nothing. If it does see a device, it cannot pair. This dongle works fine on the same computer under XP. It is a cambridge dongle which pairs with my serial port device on 2 laptops with XP I dearly want to run it on Karmic and would be willing to try a 'fix' if ti were clear as to what that 'fix' might be. KeithG -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
On Sun, Mar 28, 2010 at 12:59:57AM -, KeithG wrote: Ok, I have read tons of these posts about defective bluetooth support in gnome/kernel. What is the fix? Can I try something? Do we have any idea as to when this may be pushed to the updater for 9.10? The fix for this bug was present in Ubuntu 9.10 when it released. If you are having issues with bluetooth in 9.10, you should file a separate bug report. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. Ubuntu Developerhttp://www.debian.org/ slanga...@ubuntu.com vor...@debian.org -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
This bug is present for at least 9.4, it is still present, no actual bug fix was posted. Never explained, the issue persist allways, execpt for a few persons that i was able to see that posted that somehow, with some device worked, never for me. 2010/3/27 Steve Langasek steve.langa...@canonical.com: On Sun, Mar 28, 2010 at 12:59:57AM -, KeithG wrote: Ok, I have read tons of these posts about defective bluetooth support in gnome/kernel. What is the fix? Can I try something? Do we have any idea as to when this may be pushed to the updater for 9.10? The fix for this bug was present in Ubuntu 9.10 when it released. If you are having issues with bluetooth in 9.10, you should file a separate bug report. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. Ubuntu Developer http://www.debian.org/ slanga...@ubuntu.com vor...@debian.org -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a direct subscriber of the bug. Status in The Linux Kernel: In Progress Status in “bluez” package in Ubuntu: Invalid Status in “linux” package in Ubuntu: Fix Released Status in “bluez” source package in Intrepid: Invalid Status in “linux” source package in Intrepid: Fix Released Status in “bluez” source package in Jaunty: Invalid Status in “linux” source package in Jaunty: Fix Released Status in “bluez” package in Debian: New Status in “bluez-utils” package in Debian: New Bug description: SRU justification: Impact: A series of bluetooth dongles [1] do not work properly with the new btusb driver which replaced usb_hci. This has been fixed upstream (2.6.29-rc3). The required changes are all local to the btusb driver. Fix: The following three patches are required to fix this (two as prerequisite and one for the actual fix). The fix deviates from upstream by the change of a version number and the missing resume part which does not exist for Intrepid nor Jaunty. Test: Fix has been tested by bug reporters. --- Bluetooth doesn't work for at least the following devices: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter ID 1131:1004 Integrated System Solution Corp. Bluetooth Device ID 2001:f111 D-Link Corp. [hex] DBT-122 Bluetooth adapter ID 0a5c:200a Broadcom Corp. Bluetooth dongle They don't work properly with the newer btusb driver, which replaced hci_usb by default in 2.6.27. This hasn't been fixed upstream as of v2.6.29-rc3. Original message below: Association with Bluetooth works using kernel 2.6.26, since the updates to 2.6.27 (both -1 and -2) association fails. I can scan and see bluetooth devices but not pair. Using my phone, I start the association process, the phone asks for a passkey, and in 2.6.26 the popup window appears normally allowing me to enter the passkey. In 2.6.27 the dialog box never appears. If I use hcitool: :~$ sudo hcitool cc 00:1B:59:96:A6:DD :~$ sudo hcitool auth 00:1B:59:96:A6:DD HCI authentication request failed: Connection timed out the dialog box appears very very briefly then vanishes. dmesg shows a couple of problems: [25791.306170] btusb_intr_complete: hci0 urb 88004dd0fb40 failed to resubmit (19) [25791.315446] btusb_send_frame: hci0 urb 880048542840 submission failed and the syslog shows that there was an attempt to associate: Sep 23 08:16:59 charlie hcid[5903]: link_key_request (sba=00:11:67:9C:59:B5, dba=00:1B:59:96:A6:DD) Sep 23 08:16:59 charlie hcid[5903]: pin_code_request (sba=00:11:67:9C:59:B5, dba=00:1B:59:96:A6:DD) To unsubscribe from this bug, go to: https://bugs.launchpad.net/linux/+bug/268502/+subscribe -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Steve Langasek wrote: The fix for this bug was present in Ubuntu 9.10 when it released. If you are having issues with bluetooth in 9.10, you should file a separate bug report. For me and probably most others effected by that original general bug the problem was solved. So it is time to focus on probably more hardware specific bugs. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Hi, I confirm this bug. I've done a full report on Bug #493747: [KARMIC] Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) (Broadcom dongle) https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/493747 Didn't work on Lucid too (19.04 alpha) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: linux (Ubuntu Intrepid) Assignee: Stefan Bader (stefan-bader-canonical) = (unassigned) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I'm still getting hci_cmd_task: hci0 command tx timeout on Karmic. I can transfer one file, but as soon as a second file starts, it stops the transfer after 2 seconds or ~50 KB of transmitted data. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: bluez (Ubuntu Jaunty) Status: Invalid = Fix Committed -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: bluez (Ubuntu Jaunty) Status: Fix Committed = Invalid -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I think I rebooted after installing blueman from PPA. But it is not clear how exactly did it help, so I guess it can be not helpful in your case. Just had to share my experience. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Thanks diskin, i just installed from PPA and rebooted but still not working.. REgards! 2010/1/13 Dmitry Diskin dis...@gmail.com: I think I rebooted after installing blueman from PPA. But it is not clear how exactly did it help, so I guess it can be not helpful in your case. Just had to share my experience. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a direct subscriber of the bug. Status in The Linux Kernel: In Progress Status in “bluez” package in Ubuntu: Invalid Status in “linux” package in Ubuntu: Fix Released Status in “bluez” source package in Intrepid: Invalid Status in “linux” source package in Intrepid: Fix Released Status in “bluez” source package in Jaunty: Invalid Status in “linux” source package in Jaunty: Fix Released Status in “bluez” package in Debian: New Status in “bluez-utils” package in Debian: New Bug description: SRU justification: Impact: A series of bluetooth dongles [1] do not work properly with the new btusb driver which replaced usb_hci. This has been fixed upstream (2.6.29-rc3). The required changes are all local to the btusb driver. Fix: The following three patches are required to fix this (two as prerequisite and one for the actual fix). The fix deviates from upstream by the change of a version number and the missing resume part which does not exist for Intrepid nor Jaunty. Test: Fix has been tested by bug reporters. --- Bluetooth doesn't work for at least the following devices: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter ID 1131:1004 Integrated System Solution Corp. Bluetooth Device ID 2001:f111 D-Link Corp. [hex] DBT-122 Bluetooth adapter ID 0a5c:200a Broadcom Corp. Bluetooth dongle They don't work properly with the newer btusb driver, which replaced hci_usb by default in 2.6.27. This hasn't been fixed upstream as of v2.6.29-rc3. Original message below: Association with Bluetooth works using kernel 2.6.26, since the updates to 2.6.27 (both -1 and -2) association fails. I can scan and see bluetooth devices but not pair. Using my phone, I start the association process, the phone asks for a passkey, and in 2.6.26 the popup window appears normally allowing me to enter the passkey. In 2.6.27 the dialog box never appears. If I use hcitool: :~$ sudo hcitool cc 00:1B:59:96:A6:DD :~$ sudo hcitool auth 00:1B:59:96:A6:DD HCI authentication request failed: Connection timed out the dialog box appears very very briefly then vanishes. dmesg shows a couple of problems: [25791.306170] btusb_intr_complete: hci0 urb 88004dd0fb40 failed to resubmit (19) [25791.315446] btusb_send_frame: hci0 urb 880048542840 submission failed and the syslog shows that there was an attempt to associate: Sep 23 08:16:59 charlie hcid[5903]: link_key_request (sba=00:11:67:9C:59:B5, dba=00:1B:59:96:A6:DD) Sep 23 08:16:59 charlie hcid[5903]: pin_code_request (sba=00:11:67:9C:59:B5, dba=00:1B:59:96:A6:DD) To unsubscribe from this bug, go to: https://bugs.launchpad.net/linux/+bug/268502/+subscribe -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
BT (KY-BT100 dongle) worked right after fresh install of Karmic, then I installed blueman from Karmic repositories, and seems that it caused the above problems. Tried to remove blueman completely - did not help. Booting from standard Karmic live CD - BT worked. The problem was solved after installing blueman from PPA, which removed gnome-bluetooth. It worked even before I updated bluez from the same PPA. When I installed blueman originally from Karmic repositories, it did not remove gnome-bluetooth, and I had two bluetooth icons for some time (both disabled). -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I've added deb http://ppa.launchpad.net/blueman/ppa/ubuntu karmic main and ran apt-get update;apt-get install blueman, it removed gnome-bluetooth but i'm still having timeout messages. Could you please explain a bit longer how did you manage to solve it? Thanks! 2010/1/12 Dmitry Diskin dis...@gmail.com: BT (KY-BT100 dongle) worked right after fresh install of Karmic, then I installed blueman from Karmic repositories, and seems that it caused the above problems. Tried to remove blueman completely - did not help. Booting from standard Karmic live CD - BT worked. The problem was solved after installing blueman from PPA, which removed gnome-bluetooth. It worked even before I updated bluez from the same PPA. When I installed blueman originally from Karmic repositories, it did not remove gnome-bluetooth, and I had two bluetooth icons for some time (both disabled). -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a direct subscriber of the bug. Status in The Linux Kernel: In Progress Status in “bluez” package in Ubuntu: Invalid Status in “linux” package in Ubuntu: Fix Released Status in “bluez” source package in Intrepid: Invalid Status in “linux” source package in Intrepid: Fix Released Status in “bluez” source package in Jaunty: Invalid Status in “linux” source package in Jaunty: Fix Released Status in “bluez” package in Debian: New Status in “bluez-utils” package in Debian: New Bug description: SRU justification: Impact: A series of bluetooth dongles [1] do not work properly with the new btusb driver which replaced usb_hci. This has been fixed upstream (2.6.29-rc3). The required changes are all local to the btusb driver. Fix: The following three patches are required to fix this (two as prerequisite and one for the actual fix). The fix deviates from upstream by the change of a version number and the missing resume part which does not exist for Intrepid nor Jaunty. Test: Fix has been tested by bug reporters. --- Bluetooth doesn't work for at least the following devices: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter ID 1131:1004 Integrated System Solution Corp. Bluetooth Device ID 2001:f111 D-Link Corp. [hex] DBT-122 Bluetooth adapter ID 0a5c:200a Broadcom Corp. Bluetooth dongle They don't work properly with the newer btusb driver, which replaced hci_usb by default in 2.6.27. This hasn't been fixed upstream as of v2.6.29-rc3. Original message below: Association with Bluetooth works using kernel 2.6.26, since the updates to 2.6.27 (both -1 and -2) association fails. I can scan and see bluetooth devices but not pair. Using my phone, I start the association process, the phone asks for a passkey, and in 2.6.26 the popup window appears normally allowing me to enter the passkey. In 2.6.27 the dialog box never appears. If I use hcitool: :~$ sudo hcitool cc 00:1B:59:96:A6:DD :~$ sudo hcitool auth 00:1B:59:96:A6:DD HCI authentication request failed: Connection timed out the dialog box appears very very briefly then vanishes. dmesg shows a couple of problems: [25791.306170] btusb_intr_complete: hci0 urb 88004dd0fb40 failed to resubmit (19) [25791.315446] btusb_send_frame: hci0 urb 880048542840 submission failed and the syslog shows that there was an attempt to associate: Sep 23 08:16:59 charlie hcid[5903]: link_key_request (sba=00:11:67:9C:59:B5, dba=00:1B:59:96:A6:DD) Sep 23 08:16:59 charlie hcid[5903]: pin_code_request (sba=00:11:67:9C:59:B5, dba=00:1B:59:96:A6:DD) To unsubscribe from this bug, go to: https://bugs.launchpad.net/linux/+bug/268502/+subscribe -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Mythbuntu 9.10 here. Same problems as everyone else. $ lsusb | grep -i blue Bus 004 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) $ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.10 DISTRIB_CODENAME=karmic DISTRIB_DESCRIPTION=Ubuntu 9.10 $ hcitool scan Device is not available: No such device $ dpkg -l | grep -i blue rc blueman 1.22+r646+200911300759~karmic A Graphical bluetooth manager ii blueman-icon-humanity1.22-0ubuntu1 Blueman icon for Humanity Icon theme ii bluez4.51-0ubuntu2 Bluetooth tools and daemons ii gnome-bluetooth 2.28.1-0ubuntu2 GNOME Bluetooth tools ii libbluetooth34.51-0ubuntu2 Library to use the BlueZ Linux Bluetooth sta ii libgnome-bluetooth7 2.28.1-0ubuntu2 GNOME Bluetooth tools - support library ii mythtv-theme-blueosd 1:0.22.0~zrc1-0ubuntu2 The blueosd MythTV Theme -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Tags added: iso-testing -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Same symptoms here after an upgrade from 9.04 to 9.10 and same detected device for my BT dongle. What I do to have it work is * unplugging the usb dongle, * $ sudo modprobe -r btusb * plugg the donggle again * pray for the BT applet to become enabled * else unplugging * ... After a moment I get it work :-/ -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I just upgraded my distribution from 9.04 to 9.10 and I'm still experiencing kinda the same as in https://bugs.launchpad.net/ubuntu/+source/linux/+bug/268502/comments/252. My bluetooth dongle is: $ lsusb | grep -i blue Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) And I'm getting all problems listed in comment #252. Is this really fixed? Any additional tips, please? -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Success! Fixed for me on Ubuntu 9.10 Karmic-beta Live-CD See Bug #133690 -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: bluez (Debian) Status: Fix Committed = New ** Changed in: bluez-utils (Debian) Status: Fix Committed = New -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Hi, I'm also affected by this bug. This seems to have been fixed. Where to I find the fix? What do I need to do? I'm quite new to launchpad so please excuse me I'm missing something. I'm using Ubuntu 9.04. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
If you have an up-to-date kernel in Intrepid or Jaunty, you should have the fix that was released. Unfortunately, the error message is rather generic, and could indicate just about any problem with communicating with the dongle. I was hoping the one fix would cover most people who were getting this error message, but that may not have been the case. You may want to try a Karmic LiveCD, which will have newer code from upstream. You don't have to install it, you can just boot from the disc and try out Bluetooth stuff. If it works on the LiveCD, it should be working in the next release. You can get the latest disc image at http://cdimage.ubuntu.com/daily- live/current/ I'm looking at putting kernels in my PPA, such as one with newer Bluetooth code from upstream. If I get that going, I'll post a message here. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Confirmed on 2.6.28-15 with the following dongle: Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) I can pair a device using the dongle, but any time I attempt any kind of communication, I get the timeout. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
This bug was fixed in the package linux - 2.6.27-14.41 --- linux (2.6.27-14.41) intrepid-proposed; urgency=low [ Stefan Bader ] * Revert SAUCE: input: Blacklist digitizers from joydev.c - LP: #300143 linux (2.6.27-14.40) intrepid-proposed; urgency=low [ Amit Kucheria ] * Disable DEVKMEM for all archs on Intrepid - LP: #354221 * SAUCE: Quirk for BT USB device on MacbookPro to be reset before use - LP: #332443 [ Andy Isaacson ] * LIRC_PVR150: depends on VIDEO_IVTV - LP: #341477 * SAUCE: FSAM7400: select CHECK_SIGNATURE - LP: #341712 [ Andy Whitcroft ] * SAUCE: hotkey quirks for various Zepto Znote and Fujitsu Amilo laptops - LP: #330259 * SAUCE: unusual devs: add an entry for the ScanLogic SL11R-IDE 0.78 - LP: #336189 [ Anton Veretenenko ] * SAUCE: sony-laptop: add support for Sony Vaio FW series function/media keys - LP: #307592 [ Ayaz Abdulla ] * SAUCE: forcedeth: msi interrupt fix - LP: #288281 [ Chuck Short ] * SAUCE: [USB] Unusual Device support for Gold MP3 Player Energy - LP: #125250 [ Ike Panhc ] * squashfs: correct misspelling - LP: #322306 * SAUCE: Fixing symbol name in HECI module - LP: #336549 * Copy header files for various kernel media driver - LP: #322732 [ Stefan Bader ] * SAUCE: vgacon: Return the upper half of 512 character fonts - LP: #355057 * SAUCE: input: Blacklist digitizers from joydev.c - LP: #300143 [ Upstream Kernel Changes ] * libata: make sure port is thawed when skipping resets - LP: #269652 * x86-64: fix int $0x80 -ENOSYS return - LP: #339743 * rt2x00: Fix race conditions in flag handling - LP: #258985 * USB: cdc-acm: Add another conexant modem to the quirks - LP: #323829 * Bluetooth: Add fine grained mem_flags usage to btusb driver - LP: #268502 * Bluetooth: Handle bulk URBs in btusb driver from notify callback - LP: #268502 * Bluetooth: Submit bulk URBs along with interrupt URBs - LP: #268502 * hwmon: (abituguru3) Match partial DMI board name strings - LP: #298798 * x86: mtrr: don't modify RdDram/WrDram bits of fixed MTRRs - LP: #292619 * sis190: add identifier for Atheros AR8021 PHY - LP: #247889 * ath9k: implement IO serialization - LP: #373034 * ath9k: AR9280 PCI devices must serialize IO as well - LP: #373034 * acer-wmi: fix regression in backlight detection - LP: #86 -- Stefan Bader stefan.ba...@canonical.com Wed, 26 Aug 2009 11:48:11 +0200 ** Changed in: linux (Ubuntu Intrepid) Status: Fix Committed = Fix Released -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Have updated kernel to 2.6.28-11-generic but still get: Connecting to device 00:07:61:05:91:90. Can't get device information Device information: Connection timed out Tried the various codes like , 1234, , etc. to no avail. Can't tell you much about the dongle except it's a cheap, micro- miniature one shaped like a half-moon with no identification on it. Other (larger) dongles work. Bruce On Sep 14, 2009, at 9:52 AM, Launchpad Bug Tracker wrote: This bug was fixed in the package linux - 2.6.27-14.41 --- linux (2.6.27-14.41) intrepid-proposed; urgency=low [ Stefan Bader ] * Revert SAUCE: input: Blacklist digitizers from joydev.c - LP: #300143 linux (2.6.27-14.40) intrepid-proposed; urgency=low [ Amit Kucheria ] * Disable DEVKMEM for all archs on Intrepid - LP: #354221 * SAUCE: Quirk for BT USB device on MacbookPro to be reset before use - LP: #332443 [ Andy Isaacson ] * LIRC_PVR150: depends on VIDEO_IVTV - LP: #341477 * SAUCE: FSAM7400: select CHECK_SIGNATURE - LP: #341712 [ Andy Whitcroft ] * SAUCE: hotkey quirks for various Zepto Znote and Fujitsu Amilo laptops - LP: #330259 * SAUCE: unusual devs: add an entry for the ScanLogic SL11R-IDE 0.78 - LP: #336189 [ Anton Veretenenko ] * SAUCE: sony-laptop: add support for Sony Vaio FW series function/ media keys - LP: #307592 [ Ayaz Abdulla ] * SAUCE: forcedeth: msi interrupt fix - LP: #288281 [ Chuck Short ] * SAUCE: [USB] Unusual Device support for Gold MP3 Player Energy - LP: #125250 [ Ike Panhc ] * squashfs: correct misspelling - LP: #322306 * SAUCE: Fixing symbol name in HECI module - LP: #336549 * Copy header files for various kernel media driver - LP: #322732 [ Stefan Bader ] * SAUCE: vgacon: Return the upper half of 512 character fonts - LP: #355057 * SAUCE: input: Blacklist digitizers from joydev.c - LP: #300143 [ Upstream Kernel Changes ] * libata: make sure port is thawed when skipping resets - LP: #269652 * x86-64: fix int $0x80 -ENOSYS return - LP: #339743 * rt2x00: Fix race conditions in flag handling - LP: #258985 * USB: cdc-acm: Add another conexant modem to the quirks - LP: #323829 * Bluetooth: Add fine grained mem_flags usage to btusb driver - LP: #268502 * Bluetooth: Handle bulk URBs in btusb driver from notify callback - LP: #268502 * Bluetooth: Submit bulk URBs along with interrupt URBs - LP: #268502 * hwmon: (abituguru3) Match partial DMI board name strings - LP: #298798 * x86: mtrr: don't modify RdDram/WrDram bits of fixed MTRRs - LP: #292619 * sis190: add identifier for Atheros AR8021 PHY - LP: #247889 * ath9k: implement IO serialization - LP: #373034 * ath9k: AR9280 PCI devices must serialize IO as well - LP: #373034 * acer-wmi: fix regression in backlight detection - LP: #86 -- Stefan Bader stefan.ba...@canonical.com Wed, 26 Aug 2009 11:48:11 +0200 ** Changed in: linux (Ubuntu Intrepid) Status: Fix Committed = Fix Released -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a direct subscriber of the bug. Status in The Linux Kernel: In Progress Status in “bluez” package in Ubuntu: Invalid Status in “linux” package in Ubuntu: Fix Released Status in bluez in Ubuntu Intrepid: Invalid Status in linux in Ubuntu Intrepid: Fix Released Status in bluez in Ubuntu Jaunty: Invalid Status in linux in Ubuntu Jaunty: Fix Released Status in “bluez” package in Debian: Fix Committed Status in “bluez-utils” package in Debian: Fix Committed Bug description: SRU justification: Impact: A series of bluetooth dongles [1] do not work properly with the new btusb driver which replaced usb_hci. This has been fixed upstream (2.6.29-rc3). The required changes are all local to the btusb driver. Fix: The following three patches are required to fix this (two as prerequisite and one for the actual fix). The fix deviates from upstream by the change of a version number and the missing resume part which does not exist for Intrepid nor Jaunty. Test: Fix has been tested by bug reporters. --- Bluetooth doesn't work for at least the following devices: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter ID 1131:1004 Integrated System Solution Corp. Bluetooth Device ID 2001:f111 D-Link Corp. [hex] DBT-122 Bluetooth adapter ID 0a5c:200a Broadcom Corp. Bluetooth dongle They don't work properly with the newer btusb driver, which replaced hci_usb by default in 2.6.27. This hasn't been fixed upstream as of v2.6.29-rc3. Original message below: Association with Bluetooth works using kernel 2.6.26, since the updates to 2.6.27 (both -1 and -2) association fails. I can scan and see bluetooth
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I am running jaunty 9.04 2.6.28-15 with bluez 4.42 and still having issues. tryied with several kernel ranging from 2.6.27-11 , 2.6.28-11 and 2.6.29.6 with bluez 4.32 and bluez 4.42 having the same results. Sometimes the dongle is well recognized and can pair, and transfer files, some other times not. restarting bluetooth (/etc/init.d/bluetooth restart) removing btusb, starting bluetooth again and then insterting the module again seems to work but again, just sometimes. I've read that there is an actual fix, it seems to be a btusb issue, how can i go back to the previous driver, just by recompiling manuall another kernel? The configuration that i have now is: r...@redemption:~# uname -a Linux redemption 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 i686 GNU/Linux r...@redemption:~# lsusb |grep -i blue dBus 008 Device 005: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) r...@redemption:~# dpkg -l |grep blue ii blueman1.10-1~ppa3j A Graphical bluetooth manager ii bluetooth 4.42-2 Bluetooth support ii bluez 4.42-2 Bluetooth tools and daemons ii bluez-alsa 4.42-2 Bluetooth ALSA support ii bluez-audio4.42-2 Transitional package ii bluez-cups 4.42-2 Bluetooth printer driver for CUPS rc bluez-gnome1.8-0ubuntu5 Bluetooth utilities for GNOME ii bluez-gstreamer4.42-2 Bluetooth GStreamer support ii bluez-utils4.42-2 Transitional package ii gnome-bluetooth0.11.0-0ubuntu4 GNOME Bluetooth tools. ii libbluetooth3 4.42-2 Library to use the BlueZ Linux Bluetooth stack Typical message: r...@redemption:~# hciconfig hci0 up Can't init device hci0: Connection timed out (110) - After stopping bluetoog (/etc/init.d/bluetooth stop) - rmmod btusb - modprobe btusb I get this: r...@redemption:~# hciconfig dev hci0: Type: USB BD Address: 00:1F:81:00:02:50 ACL MTU: 1021:4 SCO MTU: 180:1 UP RUNNING RX bytes:407 acl:0 sco:0 events:18 errors:0 TX bytes:318 acl:0 sco:0 commands:19 errors:2 r...@redemption:~# hcitool inq Inquiring ... Inquiry failed.: Connection timed out - and some syslog errors: Aug 21 16:34:07 redemption bluetoothd[6915]: bridge pan0 created Aug 21 16:34:07 redemption bluetoothd[6915]: HCI dev 0 registered Aug 21 16:34:07 redemption bluetoothd[6915]: HCI dev 0 up Aug 21 16:34:07 redemption bluetoothd[6915]: Starting security manager 0 Aug 21 16:34:12 redemption bluetoothd[6915]: Can't read class of adapter on /org/bluez/6915/hci0: Connection timed out (110) Aug 21 16:34:12 redemption kernel: [ 2849.585162] hci_cmd_task: hci0 command tx timeout Aug 21 16:34:17 redemption bluetoothd[6915]: Sending getting name command failed: Connection timed out (110) Aug 21 16:34:17 redemption kernel: [ 2854.588101] hci_cmd_task: hci0 command tx timeout Aug 21 16:34:19 redemption kernel: [ 2855.987346] hci_cmd_task: hci0 command tx timeout Aug 21 16:34:22 redemption bluetoothd[6915]: Can't read class of device on hci0: Connection timed out (110) Any help would be appreciated. thanks. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Bruce, The fix is in Jaunty's 2.6.28-11.39 Linux kernel. If you have all the updates, then you should have the fix. To double-check, uname -r should report something newer than 2.6.28-11-generic. So if you still have problems, then you're being affected by a separate issue and should file a new bug. Martin, The fix put into Jaunty was from upstream so it's already included in Karmic's kernel by now. This means there's at least one more (separate) problem to be fixed before your dongle will work. I was hoping the one fix would work for all dongles having the same symptoms as mine, but that wasn't the case, so we need new bugs for the remaining non-working dongles. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Brian, I still have this problem with my dongle (0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)). What bug should I subscribe to? Jaunty 2.6.28-14-generic right now. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Ok. Yesterday, a new kernel as well as a new bluez version came to karmic, and then I was able to send a picture to my phone as well as listening to music via A2DP. so either these updates fixed it, or it's another problem. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I am running Karmic 64bit - 2.6.31-5-generic #24-Ubuntu SMP Sat Aug 1 12:47:58 UTC 2009 x86_64 GNU/Linux A word of warning I found the latest release of Bluez, 4.48 very unstable and have reverted back to 4.45-0ubuntu4, this was in combination with kernel 2.6.31-6, in combination with gnome-bluetooth 2.27.8 The devices would disappear from the menu and basically nothing worked. I'll build a new instance and re-test it and log a new bug report if I can repeat the behaviour -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: linux (Ubuntu Jaunty) Status: Fix Released = Fix Committed ** Changed in: linux (Ubuntu Jaunty) Status: Fix Committed = New -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: linux (Ubuntu Jaunty) Status: New = Fix Released -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
A fix for one Bluetooth issue has already been committed and released, so Fix Released is the proper state for this bug report. If you still have the same symptoms even with the fix and have reported one of the bugs that is marked as a duplicate of this one, you can undupe your own bug report and reopen that. Otherwise, if you are still experiencing Bluetooth issues, please file a new bug report. There are more issues to fix, and they all need to be tracked in their own bug reports. Oh, and if your symptoms have changed in any way after this fix, be sure to file a new bug and not reopen a duplicated bug report, so you don't cause confusion. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Am I stupid or something? Where, pray tell, can I find this fix? Bruce On Aug 16, 2009, at 7:45 AM, Brian Rogers wrote: A fix for one Bluetooth issue has already been committed and released, so Fix Released is the proper state for this bug report. If you still have the same symptoms even with the fix and have reported one of the bugs that is marked as a duplicate of this one, you can undupe your own bug report and reopen that. Otherwise, if you are still experiencing Bluetooth issues, please file a new bug report. There are more issues to fix, and they all need to be tracked in their own bug reports. Oh, and if your symptoms have changed in any way after this fix, be sure to file a new bug and not reopen a duplicated bug report, so you don't cause confusion. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a direct subscriber of the bug. Status in The Linux Kernel: In Progress Status in “bluez” package in Ubuntu: Invalid Status in “linux” package in Ubuntu: Fix Released Status in bluez in Ubuntu Intrepid: Invalid Status in linux in Ubuntu Intrepid: Fix Committed Status in bluez in Ubuntu Jaunty: Invalid Status in linux in Ubuntu Jaunty: Fix Released Status in “bluez” package in Debian: Fix Committed Status in “bluez-utils” package in Debian: Fix Committed Bug description: SRU justification: Impact: A series of bluetooth dongles [1] do not work properly with the new btusb driver which replaced usb_hci. This has been fixed upstream (2.6.29-rc3). The required changes are all local to the btusb driver. Fix: The following three patches are required to fix this (two as prerequisite and one for the actual fix). The fix deviates from upstream by the change of a version number and the missing resume part which does not exist for Intrepid nor Jaunty. Test: Fix has been tested by bug reporters. --- Bluetooth doesn't work for at least the following devices: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter ID 1131:1004 Integrated System Solution Corp. Bluetooth Device ID 2001:f111 D-Link Corp. [hex] DBT-122 Bluetooth adapter ID 0a5c:200a Broadcom Corp. Bluetooth dongle They don't work properly with the newer btusb driver, which replaced hci_usb by default in 2.6.27. This hasn't been fixed upstream as of v2.6.29-rc3. Original message below: Association with Bluetooth works using kernel 2.6.26, since the updates to 2.6.27 (both -1 and -2) association fails. I can scan and see bluetooth devices but not pair. Using my phone, I start the association process, the phone asks for a passkey, and in 2.6.26 the popup window appears normally allowing me to enter the passkey. In 2.6.27 the dialog box never appears. If I use hcitool: :~$ sudo hcitool cc 00:1B:59:96:A6:DD :~$ sudo hcitool auth 00:1B:59:96:A6:DD HCI authentication request failed: Connection timed out the dialog box appears very very briefly then vanishes. dmesg shows a couple of problems: [25791.306170] btusb_intr_complete: hci0 urb 88004dd0fb40 failed to resubmit (19) [25791.315446] btusb_send_frame: hci0 urb 880048542840 submission failed and the syslog shows that there was an attempt to associate: Sep 23 08:16:59 charlie hcid[5903]: link_key_request (sba=00:11:67:9C:59:B5, dba=00:1B:59:96:A6:DD) Sep 23 08:16:59 charlie hcid[5903]: pin_code_request (sba=00:11:67:9C:59:B5, dba=00:1B:59:96:A6:DD) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Hi! I have one of these dongles: ID 1131:1004 Integrated System Solution Corp. Bluetooth Device I saw this message: hci_cmd_task: hci0 command tx timeout and several of these: btusb_bulk_complete: hci0 urb ef171800 failed to resubmit (1) I am running karmic with linux 2.6.31-5-generic. Is this bug also affecting karmic or could there be another problem? -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Exactly the same as Matthijs. Same dongle, same hciconfig status (UP RUNNING ... strange) and same dmesg. Jaunty x86_64 I've installed 2.6.29 kernel from http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.29.6/ Having read that patches have been applied to 2.6.29-rc3 Is it the good place to find up-to-date kernel packages ? I also have the bluetooth packages from http://philip.magicalforest.se dpkg -l | grep blue ii bluemon1.4-5ubuntu1 ii bluetooth 4.47-jaunty~ppa1 ii bluez 4.47-jaunty~ppa1 ii bluez-alsa 4.47-jaunty~ppa1 ii bluez-cups 4.47-jaunty~ppa1 ii bluez-gnome1.8-0ubuntu5 ii bluez-gstreamer4.47-jaunty~ppa1 ii bluez-utils4.47-jaunty~ppa1 ii libbluetooth-dev 4.47-jaunty~ppa1 ii libbluetooth3 4.47-jaunty~ppa1 -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Attachment removed: rc_local-bluetooth.diff http://launchpadlibrarian.net/24206436/rc_local-bluetooth.diff -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I also have this problem in 9.04. dmesg: [ 1572.852058] usb 2-1: new full speed USB device using uhci_hcd and address 4 [ 1573.008758] usb 2-1: configuration #1 chosen from 1 choice [ 1578.026633] hci_cmd_task: hci0 command tx timeout [ 1583.031905] hci_cmd_task: hci0 command tx timeout hciconfig: hci0: Type: USB BD Address: 00:1F:81:XX:XX:XX ACL MTU: 1021:4 SCO MTU: 180:1 UP RUNNING RX bytes:360 acl:0 sco:0 events:13 errors:0 TX bytes:297 acl:0 sco:0 commands:17 errors:4 lsusb: Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) hcitool scan: Scanning ... Inquiry failed: Connection timed out -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: bluez-utils (Debian) Status: New = Fix Committed ** Changed in: bluez (Debian) Status: New = Fix Committed -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Branch linked: lp:ubuntu/karmic/linux-rt -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Another one with a not working Bluetooth connection: bluez-4.45 kernel-2.6.30.1 When I try to connect to my Playstatio 3 remote i often get this problem. I'm really tiered of this.: input: Sony Computer Entertainment Inc BD Remote Control as /devices/pci:00/:00:0b.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:1/input7 generic-bluetooth 0005:054C:0306.0001: input,hidraw0: BLUETOOTH HID v1.00 Gamepad [Sony Computer Entertainment Inc BD Remote Control] on 00:11:67:AB:3A:AD usb 2-1: USB disconnect, address 2 btusb_bulk_complete: hci0 urb f6790400 failed to resubmit (19) btusb_intr_complete: hci0 urb f6790900 failed to resubmit (19) btusb_bulk_complete: hci0 urb f6790600 failed to resubmit (19) btusb_send_frame: hci0 urb ee9f7000 submission failed usb 2-1: new full speed USB device using ohci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Thanks Håkon! The script does not work, but adding one more command makes it work on my Sony-Ericsson K850i. I'll be adding details to bug #336012, which is the proper place for it. I had it confused with the hci_cmd_task: hci0 command tx timeout because I have seen that too, occasionally, when trying to make these connections. There's now good evidence that the difficulty connecting to Sony- Ericsson phones is a completely separate bug, although it's possible to have both if you're unlucky. Further comments from me, including a script which I now use to connect to the net over 3g on my Sony-Ericsson phone, on #336012. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Branch linked: lp:ubuntu/karmic/linux-ports -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Jamie: Did you try using the script that I have attached to bug #336012: http://bugs.launchpad.net/ubuntu/+source/bluez/+bug/336012/comments/4 The point is to enable encryption before making the PAN connection. Note that you have to use a script because timing is very important, baseband connection will be disconnected automatically after about one second if no other connection is made. The bug is that the PAN connection request is resent when the phone requests encryption, so you have to enable encryption first. I think this is a kernel bug, not a bluez bug. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Unfortunately updating Bluez doesn't work for me. I've tried updating Bluez from 4.32 to 4.40 as per the suggestion. Specifically, these packages from Debian: bluetooth_4.40-2_all.deb bluez_4.40-2_i386.deb bluez-alsa_4.40-2_i386.deb bluez-compat_4.40-2_i386.deb bluez-cups_4.40-2_i386.deb bluez-gstreamer_4.40-2_i386.deb bluez-utils_4.40-2_all.deb libbluetooth3_4.40-2_i386.deb Using the above packages and Jaunty's latest kernel, 2.6.28-13-generic, I'm still not able to make connections to my Sony-Ericsson K850i phone. The symptoms are the same old: the phone seems an attempted connection, and asks for confirmation (if not already allowed), and then the phone sees a second attempted connection. With my ancient kernel patch (long ago now on this bug), there's only one connection and it works. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I can confirm that Bluez 4.32 to 4.40 fixed my problem, as per Dominique Meeùs' suggestion. This is with a Broadcom dongle, USB ID: 0a5c:200a. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Good news: I bought a Belkin Mini Bluetooth Adapter (only 12€) and hooked it up to my USB port on my PC. And guess what? Everything ran flawless! - USB/Bluetooth device automatically detected. (Bluetooth applet showed automatically in the top pannel) - Bluetooth user/password sequence passed without even a glitch - browsed file system on my Nokia 6021 without problems - adding files to the mobile phone worked fine as well This might encourage other people to go on in their quest to get things working on their Ubuntu system. I'm using one of the latest Ubuntu versions: Ubuntu 9.04 - the Jaunty Jackalope - released in April 2009. Thomas -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Tags added: hw-specific -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Problem solved with bluez 4.40 - My Broadcom dongle now works. lsusb output: Bus 003 Device 002: ID 0a5c:200a Broadcom Corp. Bluetooth dongle Ubuntu 9.04 Jaunty kernel 2.6.28-13-generic I can now connect to my Nokia N70 phone, my Nokia 770 Internet Tablet and my Nokia LD-3W Bluetooth GPS device. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I can also confirm that bluez 4.40 fixed my bluetooth after months of not working (9.04 AMD64 with latest kernel). All I did was follow Dominique's instructions above and used 'amd64' instead of 'i386'. lsusb: Bus 001 Device 008: ID 047d:105d Kensington PocketMouse Bluetooth Bus 001 Device 005: ID 0a5c:3535 Broadcom Corp. (Yes, I show 2 BT devices with one dongle. No idea why.) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
DBT-122 also working here now, with Debian packages (AMD64, 9.04) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
In the case of ID 2001:f111 D-Link Corp. [hex] DBT-122 Bluetooth adapter, it seems that it was not so much a kernel bug than a bluez bug: It still does NOT work with kernel 2.6.29 and the regular Bluez 4.3x from the Ubuntu distribution. It DOES work OK with Bluez 4.40-2 from Debian. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
output from lsusb: ID 0a5c:200a Broadcom Corp. Bluetooth dongle Still does not work with kernel 2.6.28-13-generic on jaunty # hcitool scan Scanning ... Inquiry failed: Connection timed out -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
I just did boot back in 2.6.28 (2.6.28-12-generic #43-Ubuntu SMP Fri May 1 19:27:06 UTC 2009 i686). My D-Link DBT-122 (ID 2001:f111) works as expected. This confirms that, for this dongle, Bluez 4.00 to 4.32 was the problem and Bluez 4.40 the solution, not the kernel. (Mind the fact that there are two different D-Link DBT-122 in the lists of USB IDs.) -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
For some dongles (as my D-Link DBT-122), there little or no kernel problem, but a Bluez problem. This is what I did concretely: — display http://http.us.debian.org/debian/pool/main/b/bluez/ — click libbluetooth3_4.40-2_i386.deb and simply accept installation by GDebi — idem with bluez_4.40-2_i386.deb and bluetooth_4.40-2_all.deb. (Others may have to make an other choice than i386.) With Bluez 4.40, my problem was solved (after nearly eight months regression!) It would be interesting that other people test Bluez 4.40 with the Broadcom or other dongles. It would be interesting to make this test with kernels 2.6.27 or 2.6.28. I installed 2.6.29 (with no improvement) before I heard of Bluez 4.40. -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Accepted linux into intrepid-proposed, the package will build now and be available in a few hours. Please test and give feedback here. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you in advance! ** Tags added: verification-needed -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Bluez 4.40 works for me, using this: gnome-obex-send -d XX:XX:XX:XX:XX:XX '/home/maximi89/Foto curriculo.png' -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
Hi, bluez 4.40 fix my problem, please closes this bug, i use gnome-obex- send: gnome-obex-send -d XX:XX:XX:XX:XX:XX '/home/maximi89/Foto curriculo.png' works mostly, kernel 2.6.30-rc6 fix the problem of hci0 tx timeout ID 1131:1004 Integrated System Solution Corp. Bluetooth Device [ 6306.340042] usb 2-2: new full speed USB device using ohci_hcd and address 4 [ 6306.564806] usb 2-2: New USB device found, idVendor=1131, idProduct=1004 [ 6306.564815] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6306.564822] usb 2-2: Product: ISSCEDRBTA [ 6306.564826] usb 2-2: Manufacturer: ISSC [ 6306.564973] usb 2-2: configuration #1 chosen from 1 choice sorry, i was trying with: sudo hciconfig hci0 up sudo hcitool cc XX:XX:XX:XX:XX:XX (holtmann of bluez say that it's only for developers) that's wrong because with l2ping tell you are working fine sending tx, and gnome-obex-send or other program can tell you if are sending files or not. When i back to the reposiroty of debian bluez 4.34-0exp1 and do hciconfig hci0 up this works for me with a bluetooth sender files like gnome-obex-send So this bug is invalid. Greetings! -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
** Changed in: bluez (Debian) Status: Unknown = New -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 268502] Re: Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
i update to kernel 2.6.30-rc6 on Debian, and bluez 4.34-0exp1 and now i can ping and scan devices, and the error hci0 tx timeout disappear, but still not working... i can't use or transfers files... ID 1131:1004 Integrated System Solution Corp. Bluetooth Device -- Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout) https://bugs.launchpad.net/bugs/268502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
