Public bug reported:

Plugged in adapter with a standard compact flash card in, but dmesg only 
reports this:
[ 5459.592116] pci 0000:02:00.0: reg 10 io port: [0xfff8-0xffff]
[ 5459.592131] pci 0000:02:00.0: reg 14 io port: [0xfffc-0xffff]
[ 5459.592144] pci 0000:02:00.0: reg 18 io port: [0x00-0x3f]
[ 5459.592157] pci 0000:02:00.0: reg 1c 32bit mmio: [0x000000-0x000fff]

No new disk devices are detected when adapter is inserted.
Adapter confirmed working under Windows XP and Mac OS X 10.5 with appropriate 
driver from www.delkin.com
Have tried "sudo modprobe pata_ninja32" but no new devices or messages in dmesg.
Have also tried adapter under Ubuntu Jaunty Jackelope (9.04), but exact same 
problem occurs.
Noticed that before kernel 2.6.27, driver delkin_cb was used.  Tried booting up 
in Gutsy Gibbon (kernel 2.6.22) and manually loading delkin_cb, but again, no 
new messages or disks in dmesg.

Source Package: linux-image-2.6.31-14-generic

cat /proc/version_signature shows:
Ubuntu 2.6.31-14.48-generic

lspci -n shows:
02:00.0 0180: 1145:f103 (rev 02)

lspci -vnvn shows:
02:00.0 Mass storage controller [0180]: Workbit Corporation NinjaPATA-32 Delkin 
Cardbus UDMA [1145:f103] (rev 02)
        Subsystem: Workbit Corporation NinjaPATA-32 Delkin Cardbus UDMA 
[1145:f103]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 2440 [disabled] [size=8]
        Region 1: I/O ports at 2448 [disabled] [size=4]
        Region 2: I/O ports at 2400 [disabled] [size=64]
        Region 3: Memory at 24000000 (32-bit, non-prefetchable) [disabled] 
[size=4K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

lspci -vxxx shows:
02:00.0 Mass storage controller: Workbit Corporation NinjaPATA-32 Delkin 
Cardbus UDMA (rev 02)
        Subsystem: Workbit Corporation NinjaPATA-32 Delkin Cardbus UDMA
        Flags: medium devsel, IRQ 19
        I/O ports at 2440 [disabled] [size=8]
        I/O ports at 2448 [disabled] [size=4]
        I/O ports at 2400 [disabled] [size=64]
        Memory at 24000000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Capabilities: [60] Power Management version 2
00: 45 11 03 f1 00 00 90 02 02 00 80 01 00 00 00 00
10: 41 24 00 00 49 24 00 00 01 24 00 00 00 00 00 24
20: 00 00 00 00 00 00 00 00 80 00 00 00 45 11 03 f1
30: 00 00 00 00 60 00 00 00 00 00 00 00 13 01 10 04
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 13 03 43 49 53 1c 04 02 dc 00 ff 15 18 08 00 57
90: 6f 72 6b 62 69 74 00 4e 69 6e 6a 61 55 54 41 54
a0: 41 33 32 00 ff 20 04 c0 24 01 01 04 06 03 01 04
b0: 08 00 00 05 0b 41 39 11 b5 1e 1e 0e 30 ff ff 10
c0: 07 06 11 00 08 00 00 00 07 06 12 00 04 00 00 00
d0: 07 06 13 00 40 00 00 00 07 06 04 00 00 10 00 00
e0: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

pccardctl status shows:
Socket 0:
  3.3V 32-bit PC Card

lsb_release -rd shows:
Description:    Ubuntu 9.10
Release:        9.10

lsb_release -a shows:
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 9.10
Release:        9.10
Codename:       karmic

cat /proc/interrupts show:
           CPU0       
  0:     631128   IO-APIC-edge      timer
  1:       2493   IO-APIC-edge      i8042
  7:          1   IO-APIC-edge    
  8:          0   IO-APIC-edge      rtc0
 11:       9187   IO-APIC-fasteoi   acpi
 12:      16296   IO-APIC-edge      i8042
 14:      37053   IO-APIC-edge      pata_sis
 15:      66072   IO-APIC-edge      pata_sis
 17:     252629   IO-APIC-fasteoi   b43
 18:      26876   IO-APIC-fasteoi   SiS SI7012
 19:          5   IO-APIC-fasteoi   yenta, eth0
 20:      21850   IO-APIC-fasteoi   ohci_hcd:usb2
 21:          0   IO-APIC-fasteoi   ohci_hcd:usb3
 23:      35828   IO-APIC-fasteoi   ehci_hcd:usb1
NMI:          0   Non-maskable interrupts
LOC:     846048   Local timer interrupts
SPU:          0   Spurious interrupts
CNT:          0   Performance counter interrupts
PND:          0   Performance pending work
RES:          0   Rescheduling interrupts
CAL:          0   Function call interrupts
TLB:          0   TLB shootdowns
TRM:          0   Thermal event interrupts
THR:          0   Threshold APIC interrupts
MCE:          0   Machine check exceptions
MCP:         22   Machine check polls
ERR:        261
MIS:          0

uname -a reports:
Linux aspire-3000 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 
i686 GNU/Linux

I hope you have enough information to work with.

Regards,
Quinn

ProblemType: Bug
AplayDevices:
 **** List of PLAYBACK Hardware Devices ****
 card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
Architecture: i386
AudioDevicesInUse:
 USER        PID ACCESS COMMAND
 /dev/snd/controlC0:  sonja      1317 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'SI7012'/'SiS SI7012 with ALC203 at irq 18'
   Mixer name   : 'Realtek ALC203 rev 0'
   Components   : 'AC97a:414c4770'
   Controls      : 31
   Simple ctrls  : 20
Date: Sat Nov 21 16:48:46 2009
DistroRelease: Ubuntu 9.10
HibernationDevice: RESUME=UUID=51744d58-db0e-4384-b32d-16096a2a1e25
Lsusb:
 Bus 002 Device 006: ID 05ac:0304 Apple, Inc. Optical USB Mouse [Mitsumi]
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Acer, inc. Aspire 3000
Package: linux-image-2.6.31-14-generic 2.6.31-14.48
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   3.3V 32-bit PC Card
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic 
root=UUID=6a7d2815-7859-4b99-a058-f071ee0af75d ro quiet splash
ProcEnviron:
 LANG=en_DK.UTF-8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
 linux-backports-modules-2.6.31-14-generic N/A
 linux-firmware 1.24
RfKill:
 0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
SourcePackage: linux
Uname: Linux 2.6.31-14-generic i686
XsessionErrors:
 (gnome-settings-daemon:1367): GLib-CRITICAL **: g_propagate_error: assertion 
`src != NULL' failed
 (nautilus:1402): Eel-CRITICAL **: eel_preferences_get_boolean: assertion 
`preferences_is_initialized ()' failed
 (polkit-gnome-authentication-agent-1:1428): GLib-CRITICAL **: 
g_once_init_leave: assertion `initialization_value != 0' failed
 (nautilus:1813): Eel-CRITICAL **: eel_preferences_get_boolean: assertion 
`preferences_is_initialized ()' failed
 (nautilus:1975): Eel-CRITICAL **: eel_preferences_get_boolean: assertion 
`preferences_is_initialized ()' failed
dmi.bios.date: 02/20/06
dmi.bios.vendor: Acer
dmi.bios.version: 3A32
dmi.board.name: Lugano M
dmi.board.vendor: Acer, Inc.
dmi.board.version: Not Applicable
dmi.chassis.type: 1
dmi.chassis.vendor: , Inc.
dmi.chassis.version: N/A
dmi.modalias: 
dmi:bvnAcer:bvr3A32:bd02/20/06:svnAcer,inc.:pnAspire3000:pvrNotApplicable:rvnAcer,Inc.:rnLuganoM:rvrNotApplicable:cvn,Inc.:ct1:cvrN/A:
dmi.product.name: Aspire 3000
dmi.product.version: Not Applicable
dmi.sys.vendor: Acer, inc.

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: apport-bug i386

-- 
Delkin Cardbus 32 Compact Flash Adapter not recognized
https://bugs.launchpad.net/bugs/486332
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to