In Hardy with 2.6.24-16-generic Volito 2 works out-of-the-box.
** Changed in: linux-source-2.6.17 (Ubuntu)
Status: New = Fix Released
--
Wacom Volito 2 tablet doesn't work
https://bugs.launchpad.net/bugs/61662
You received this bug notification because you are a member of Ubuntu
Bugs,
I confirm that in Feisty, it works out of the box (fresh install).
Even better, it still works after the kernel upgrade.
Thanks for your efforts.
:)
--
Wacom Volito 2 tablet doesn't work
https://bugs.launchpad.net/bugs/61662
You received this bug notification because you are a member of Ubuntu
Hello,
Wacom Volito 2 tablet now works 'Out-of-the-Box'.
Decided to do a 'clean' install of Feisty yesterday (20/04) once the
initial scramble had died down. Before beginning I created a separate
partition for '/home' and copied everything across following this
article at
Hello,
I have managed to get the Volito2 working, as in recognised and in default
absolute mode.
However, I am used to using it in relative mouse mode. When I change the
settings in xorg.conf, the cursor goes crazy on the x axis - jumping around. Y
axis seems fine. I tried playing with the
I can't seem to be able to get it working with 2.6.17-11 using the module you
provided. I used the same procedure I used successfully for 2.6.17-10.
Any suggestions?
Thanks!
That error is because your kernel doesn't match the version the module was
compiled against. I've included the module I
As it seems, in feisty there will be the old 0.7.2 version of wacom tools.
Does anybody have a clue where is the appropriate place to file the wish, that
at every kernel update, wacom.ko gets updated too?
--
Wacom Volito 2 tablet doesn't work
https://launchpad.net/bugs/61662
--
ubuntu-bugs
** Description changed:
Binary package hint: linux-image-2.6.17-8-generic
+ Still present in 2.6.17-11-386.
The /dev/input/wacom symbolic link is created properly when the tablet
is connected, but cat-ing it while moving the stylus doesn't show any
output.
Compiling the wacom.ko
That error is because your kernel doesn't match the version the module
was compiled against. I've included the module I compiled from the
stable sources (0.7.6-4) against the 2.6.17-10-386 sources which works
with my 2.6.17-11-386 kernel (for which I can't find the sources).
** Attachment added:
Hello Mark,
Thank you very much for your assistance, greatly appreciated. I'll try
setting up my tablet again in the morning (when I'm more awake!).
Kind regards,
KC
Mark Fenton wrote:
That error is because your kernel doesn't match the version the module
was compiled against. I've included
Hi, also getting these problems!
Posted the following on the Ubuntu forum, was directed here:
I've got a Volito2, which I never got properly working in Dapper (x86) -
sometimes it worked in absolute mode but I use it in mouse mode. Just
upgraded to Edgy, hoping it might help sort it out, but now
Like CoolkcaH, mine doesn't work either - I get the same 'wacom: disagrees
about version of symbol struct_module' report after having tried all
suggestions.
Very frustrating!
The pen is usually mightier than the mouse but in this instance the pen just
don't work!
--
Wacom Volito 2 tablet
Thanks! I haven't tried the module 0.7.5-4, but 0.7.6-1 worked
flawlessly for me, thank you!
--
Wacom Volito 2 tablet doesn't work
https://launchpad.net/bugs/61662
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Can't make this work..
With the new module the tablet works, but pressure is detected for a few
seconds. Then it drops to the minimum, and no matter how hard I press, all I
get is no pressure or minimum pressure. This happens under gimp and under
Inkscape.
Anyway wacdump shows pressure being
I can't make it work. I replaced the wacom.ko module and now /dev/input/wacom
doesn't even get created.
I did
grep -i wacom /var/log/messages | tail
and get this:
Nov 19 21:37:15 localhost kernel: [17179611.172000] wacom: disagrees
about version of symbol struct_module
I also tried to compile
I can confirm this bug.
Thank you very much for your help, Kimiko Koopman.
--
Wacom Volito 2 tablet doesn't work
https://launchpad.net/bugs/61662
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
The 0.7.6 version should be included in edgy-updates as it supports
2.6.17 kernels and, obviously, it has no point to have an outdated and
not working wacom.ko module in edgy.
--
Wacom Volito 2 tablet doesn't work
https://launchpad.net/bugs/61662
--
ubuntu-bugs mailing list
Thanks so much for figuring out how to fix this problem! I've been stuck
with a 2.6.15 kernel for ages now because of this problem.
--
Wacom Volito 2 tablet doesn't work
https://launchpad.net/bugs/61662
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Thank you so much for your attached version. This was the last roadblock
to convince a friend to use ubuntu.
--
Wacom Volito 2 tablet doesn't work
https://launchpad.net/bugs/61662
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Here's the kernel module I made from version 0.7.6-1. The a
href=http://linuxwacom.sourceforge.net/Linux Wacom Project/a lists
this version as stable, so I suppose it will be included in Ubuntu soon.
** Attachment added: Wacom kernel module 0.7.6-1
Your attached version works fine for me.
Thanks.
--
Wacom Volito 2 tablet doesn't work
https://launchpad.net/bugs/61662
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
In 2.6.17-10-generic it still doesn't work.
I attach the 0.7.5-4 (development) module I compiled on my system -- use
at your own risk ;)
Put it in /lib/modules/your kernel/kernel/drivers/usb/input/
Backup the old wacom.ko file in case mine didn't work.
** Attachment added: wacom kernel module
I can confirm this bug. I am using a Wacom Volito 2 too. See my topic on
the Ubuntu forums for more information and some logs
(http://ubuntuforums.org/showthread.php?p=1567450).
Question to the reporter: is it possible to share your new compiled
wacom.ko with us, as I don't know how to compile
Same here with a PenPartner. I compiled linuxwacom drivers v0.7.4-3 and
it worked.
--
Wacom Volito 2 tablet doesn't work
https://launchpad.net/bugs/61662
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
23 matches
Mail list logo