same bug in karmic here, too. also refuses to see any changes to
/etc/X11/xorg.conf concerning SHMConfig.
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Changed in: gsynaptics (Ubuntu)
Status: Confirmed = Fix Released
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Well, it still isn't fixed in karmic... Oddly enough, the thing about
remembering settings used to work until I upgraded to karmic, so it's
probably an otherwise misconfiguration issue that exposes the bug, not a
fresh install.
--
gsynaptics-init won't load settings
Still broken on jaunty.
b...@barb-laptop:~$ gsynaptics-init
GSynaptics couldn't initialize.
You have to set 'SHMConfig' 'true' in xorg.conf or XFree86.conf to use
GSynaptics
b...@barb-laptop:~$ cat /etc/X11/xorg.conf
Section InputDevice
Identifier Configured Mouse
Driver
Just want to confirm that to for 8.10, too.
terminal output was this:
$ gsynaptics-init
** (gsynaptics-init:6066): WARNING **: Using synclient
Unknown parameter CoastingSpeedThreshold
Unknown parameter ZoomIn
Unknown parameter ZoomOut
Unknown parameter RotateRight
Unknown parameter RotateLeft
I take it back again. After a reboot, settings were again not loaded.
It's broken.
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Still a problem in Intrepid as far as I can tell. I have gsynaptics-
init --sm-disable in my startup sessions, but tapping is enabled until
I run gsynaptics itself.
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You received this bug notification because you are a
I take it back; I had a residual touchpad device section in my
xorg.conf, and when I removed it, everything was good for me.
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Confirming exact same problem in Hardy.
I doubt this will get any attention any time soon, see:
http://bugzilla.gnome.org/show_bug.cgi?id=154029
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You received this bug notification because you are a member of Ubuntu
I am still puzzled. How come upstrame has had a fix for the longest time
and we don't ?
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
the bug is present in gutsy
$ gsynaptics-init
** (gsynaptics-init:18215): WARNING **: Using synclient
Unknown parameter CoastingSpeedThreashold
it is very easy to fix this error, just modify the string containing
CoastingSpeedThreashold
maybe replacing it by just the first part of the name:
Just another confirmation of this bug. Using Gutsy on a new Dell
Inspiron 1420, gsynaptics 0.9.12. I'm going to pester Dell about
getting behind fixing this and bug #133408, they need those fixed and
gsynaptics pre-installed on their Ubuntu laptops.
--
gsynaptics-init won't load settings
still not fixed in gutsy:
bash:~$ gsynaptics-init
** (gsynaptics-init:10859): WARNING **: Using synclient
Unknown parameter CoastingSpeedThreashold
bash:~$ gsynaptics-init --version
GNOME gsynaptics-init 0.9.12
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You
0.9.7-3 does not fix this problem.
The debbugs #401637 fixes only the spelling error in the error message,
but does not fix this bug (#70525). The error message still occurs, and
settings cannot be saved with the gsynaptics package.
--
gsynaptics-init won't load settings
The name of the attribute causing the error is (apparently)
CoastingSpeed. Note no Threshold or Threashold or any other
spelling at the end, just CoastingSpeed.
After changing this in gsynaptics.c, it works properly and can save and
restore settings with gsynaptics-init. (finally!)
This is for
Not fixed in 0.9.7-3 in Feisty.
** Changed in: gsynaptics (Ubuntu)
Status: Fix Released = Confirmed
--
gsynaptics-init won't load settings
https://bugs.launchpad.net/bugs/70525
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
Fixed in 0.9.7-3 in Feisty.
** Changed in: gsynaptics (Ubuntu)
Status: Unconfirmed = Fix Released
--
gsynaptics-init won't load settings
https://launchpad.net/bugs/70525
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Is this the same problem that's been around since bug 3406 ?
--
gsynaptics-init won't load settings
https://launchpad.net/bugs/70525
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
The odd thing for me is that it does work... sometimes.
I'll log in to find the scrolling not working, but then after a while of normal
usage, I'll suddenly note that the scrolling has started working. It seems
really random to me.
The CoastingSpeedThreshold misspelling has been fixed, but I
(no 'edit' or 'append' function) Oh, and I also forgot this: somewhere
along the line I manually put the relevant circularscrolling options directly
into xorg.conf. (I used synclient directly to get the rightedge just perfect):
snip
Option Emulate3Buttons true
Option
** Changed in: gsynaptics (Debian)
Status: Unknown = Fix Released
--
gsynaptics-init won't load settings
https://launchpad.net/bugs/70525
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Bug watch added: Debian Bug tracker #401637
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=401637
** Also affects: gsynaptics (Debian) via
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=401637
Importance: Unknown
Status: Unknown
--
gsynaptics-init won't load settings
I noticed something new (now on Fiesty also): Although the misspelling
seems to have been fixed, my setting still don't reliably load.
** (gsynaptics-init:10682): WARNING **: Using synclient
Unknown parameter CoastingSpeedThreshold
When I first log in, the circular and vertical scrolling don't
Happens here too, newest Feisty.
--
gsynaptics-init won't load settings
https://launchpad.net/bugs/70525
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
24 matches
Mail list logo
