> -rw-r- 1 root lp 131822 Dec 14 13:17 MX860.ppd
There is nothing wrong here. A PPD is not readable by a user process,
only by one with root privileges. Whatever you ran did not have root
privileges.
You are using the gutenprint PPD for MX860; no problem there.
Now do
lpadmin -p mx860 -v
Public bug reported:
No matter what you put in TLS_CIPHER_LIST and/or TLS_PROTOCOL the
settings are ignored.
There is no way to limit the TLS Protocol or Cipher list in courier imap
or pop. This is critical for PCI compliance. Older versions would
allow you to manipulate the tls_cipher_list to
Public bug reported:
1. as you can see in the error log there is an authorisation issue too.
2. I can not select 4k video with 60hz.
The LG 27ud58-b does support it and the Intel® Iris™ Plus 655 too.
3. When the lg monitor is in HDMI ultra hd deep color mode then the screen
keeps blinking in
Upstream bug now at https://gitlab.gnome.org/GNOME/gnome-
calculator/issues/26
** Tags removed: raring
** Tags added: bionic
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1210607
Title:
Scientific
$ yes '' | make localmodconfig
$ make -j`nproc` deb-pkg
Then the kernel should be built as Debian Package.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1805433
Title:
Call trace in dmesg (need to
Thank you for taking the time to report this bug and helping to make
Ubuntu better. It seems that there was an error on your system when
trying to install a particular package. Please execute the following
command, as it will clear your package cache, in a terminal:
sudo apt-get clean
Then try
kim@kim-MS-7865:/etc/cups/ppd$ nmap 192.168.1.87
Starting Nmap 7.60 ( https://nmap.org ) at 2018-12-15 14:12 CST
Nmap scan report for unknown001e8f745a78.attlocal.net (192.168.1.87)
Host is up (0.086s latency).
Not shown: 998 closed ports
PORTSTATE SERVICE
80/tcp open http
139/tcp open
Thank you for taking the time to report this bug and helping to make
Ubuntu better. It seems that there was an error on your system when
trying to install a particular package. Please execute the following
command, as it will clear your package cache, in a terminal:
sudo apt-get clean
Then try
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: ubuntu-release-upgrader (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Removing the maybe-ubiquity from the boot params, booted to live session
3 out 3 attempts.
Sometimes the ubiquity boot will fail before the Try/Install menu is
displayed as shown in the attachment. And it on this hybrid hardware,
Try Kubuntu option always fails (assuming the ubiquity reaches
Apologies for the typos.
The error_log has
[Job 477] PID 5588 (/usr/lib/cups/backend/cnijnet) exited with no
errors.
But you get no output. What is your CUPS version?
--
Brian.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Changed in: ubiquity (Ubuntu)
Assignee: fahimfaezabir (abir032) => shaik shoyab azmal (shoyab)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1766945
Title:
(EFI on top of legacy install)
Let me know if you agree.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808581
Title:
cannot print to Canon MX860 after upgrade to Ubuntu 18.04
To manage notifications about this bug go to:
Hi All,
To set a single table cell background the Table Properties dialog
Background tab page can be used.
Currently the Background Color button will only set the cell background
color for multi-selected table cells. For non multi-selected cells the
paragraph background color is set for the cell
It can be fixed following the instructions in this answer:
https://askubuntu.com/questions/1029128/inverted-horizontal-scrolling-ubuntu-18-04#answer-1031657
I've had the problem before. It seems like a weird why-bother-choice by
the community / Canonical.
--
You received this bug notification
Forget the last post, please. It's in the error_log.
--
Brian.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808581
Title:
cannot print to Canon MX860 after upgrade to Ubuntu 18.04
To manage
Public bug reported:
Attempted to install Ubuntu18.04.1-desktop-amd64.iso as a virtual
machine (VirtualBox Version 5.1.26 r117224).
Installation fails.
More information may follow.
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubiquity 18.04.14.6
ProcVersionSignature: Ubuntu
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: grub-installer (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/994710
** Also affects: gtk+3.0 (Ubuntu Cosmic)
Importance: Undecided
Status: New
** Changed in: gtk+3.0 (Ubuntu Cosmic)
Assignee: (unassigned) => Jeremy Bicha (jbicha)
** Changed in: gtk+3.0 (Ubuntu Cosmic)
Importance: Undecided => Medium
** Changed in: gtk+3.0 (Ubuntu Cosmic)
> I ran commands:
> sudo lpadmin -p mx860 -v socket://192.168.1.87:9100 -E -P
> /etc/cups/ppd/MX860.ppd
> and lp -d mx860 /etc/nsswitch.conf
Looks good. But nothing printed, eh.
What do we have for
nmap 192.168.1.87 ?
--
Brian.
--
You received this bug notification because you are a
when I try upgrade to Ubuntu 18.04 from 16.04 the upgrade software stop and
show the message "There is a unsolve problem, an error occurred while
calculating the update.". After three possible cause are showed:
Upgrade to a pre-release
to run from the pre-release version
Use non-official ubuntu
Another note, in the last 2 years, Ubiquity has never booted correctly
on this hardware so this problem is not something new. I never realized
the issue was ubiquity until today. (Neon live booted on this laptop
without requiring nomodeset and thus provided the ubiquity clue as Neon
does not use
so how does this issue get fixed??
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1786876
Title:
I can't upgrade to Bionic Beaver
To manage notifications about this bug go to:
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: mate-dock-applet (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1549971
Public bug reported:
-
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: libc6 2.19-0ubuntu6.14
ProcVersionSignature: Ubuntu 4.4.0-140.166~14.04.1-generic 4.4.162
Uname: Linux 4.4.0-140-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.29
Architecture: amd64
Date: Sat Dec 15 20:36:53 2018
** Tags removed: need-duplicate-check
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808650
Title:
package libc6 2.19-0ubuntu6.14 failed to install/upgrade: podproces
nový pre-installation skript
** Changed in: linux-kvm (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1788336
Title:
Failed to install nfs-kernel-server package on KVM kernels
To manage
4.673164] fbcon: nouveaufb (fb0) is primary device
[4.956933] IPv6: ADDRCONF(NETDEV_UP): enp19s0: link is not ready
[4.960504] RTL8211DN Gigabit Ethernet r8169-1300:00: attached PHY driver
[RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-1300:00, irq=IGNORE)
[5.198912] IPv6:
I think my only other option is to de-install and re-install the printer
driver. That is a pain because Canon does not support Linux drivers. I
have to search the web for the latest version from a hopefully reliable
source. It takes a day. Doing this always results in inconsistent
results for
Thank you. It may be a week or two until I have time to reinstall
drivers. I will repost if that helps. Let me know if I should do
anything else today.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
apparently, the dpkg is with a fatal error:
dpkg: error to process the package hunspell-en-ca (--configure):
the package is in bad state of inconsistency;
Errors were encountered while processing:
hunspell-en-ca
E: Sub-process /usr/bin/dpkg returned an error code (1)
The touchpad works fine on linux kernel v4.18.19 and more
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1802712
Title:
Doesn't work a touchpad on Lenovo 330-15IGM 81d1
To manage notifications
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1767808
Title:
"drm timed out" with driver i915 + Intel Mobile GM965/GL960
Hello I want fix this
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1766945
Title:
(EFI on top of legacy install) choosing "replace" or "resize" options
in partitioning may lead to an install
Hello I want fix this
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1766945
Title:
(EFI on top of legacy install) choosing "replace" or "resize" options
in partitioning may lead to an install
Information for the PC Specialist Cosmos VII laptop
(https://www.pcspecialist.co.uk/notebooks/cosmosVII-15/), with GTX 1050
GPU.
** Attachment added: "PC_Specialist_LTD-N8xEJEK.tar.gz"
It seems that the only way to contact the printer is with the cnijjet
backend. One last last thing if you would: execute
/usr/lib/cups/backend/cnijet
and give us the output.
Thanks for your co-operation.
Brian.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
When booting to a live usb via UEFI boot on a hybrid Dell Inspiron 7559
laptop (Intel/Nvidia), the Try "Kubuntu option" hangs. If maybe-
ubiquity is removed from the boot parameters, the laptop will live boot
without issue. Proceeding directly to install works fine.
Public bug reported:
At first glance, this seems similar to this bug:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-
drivers-390/+bug/1752053/+index?comments=all
However, none of the solutions listed there work and the workaround is to use
lightdm instead of gdm3:
sudo apt install
Oops. I had previously turned off my printer. Now, with the printer
on:
kim@kim-MS-7865:/usr/lib/cups/backend$ /usr/lib/cups/backend/cnijnet
network cnijnet:/00-1E-8F-74-5A-78 "Canon MX860 series"
"Canon-MX860-series_00-1E-8F-74-5A-78"
kim@kim-MS-7865:/usr/lib/cups/backend$
--
You received
Seems like this commit fixes the issue:
commit 5478ad10e7850ce3d8b7056db05ddfa3c9ddad9a
Author: Thomas Zimmermann
Date: Thu Nov 15 11:42:16 2018 +0100
drm/ast: Remove existing framebuffers before loading driver
If vesafb attaches to the AST device, it configures the framebuffer
I was not able to downgrade (force version) in synaptic apache2, though
selected it did nothing. So I had to remove:
apache2
apache2-mpm-prefork
libapache2-mod-php5
virtualmin-lamp-stack
I could not reinstall as I got these errors:
apache2:
Depends: apache2-bin (=2.4.7-1ubuntu4.20) but
TLDR: the Xubuntu 18.04.1 installer does not recognize an NTFS EFI
partition. Then the process takes it course and fails.
Longer story. I recently staged two dual boot machines from scratch.
The only difference between them was the EFI partition.
Case 1:
* Laptop came with Windows 10
I can't fix it yet.
Em Sáb, 15 de dez de 2018 21:35, trisha g <1786...@bugs.launchpad.net
escreveu:
> so how does this issue get fixed??
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1786876
>
> Title:
> I can't
Public bug reported:
Pulseaudio is not getting loaded at the time of boot and it has to be
manually started each time
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: pulseaudio 1:11.1-1ubuntu7.1
ProcVersionSignature: Ubuntu 4.15.0-42.45-generic 4.15.18
Uname: Linux 4.15.0-42-generic x86_64
[Expired for grub2 (Ubuntu) because there has been no activity for 60
days.]
** Changed in: grub2 (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1790586
Please file an upstream bug at https://bugs.freedesktop.org/
Product: DRI
Component: DRM/amdgpu
And attach dmesg in comment #20.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1807511
Title:
AMDGPU
** Changed in: lua-torch-cutorch (Debian)
Status: New => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808538
Title:
Please remove src:lua-torch-cutorch
To manage
Print job submitted and hung:
kim@kim-MS-7865:/etc/cups/ppd$ lpq
MX860 is ready and printing
RankOwner Job File(s) Total Size
active kim 479 nsswitch.conf 1024 bytes
kim@kim-MS-7865:/etc/cups/ppd$ lpstat -t
scheduler is running
system
The printer continues to be connectable via the printer web host.
http://192.168.1.87/English/pages_WinUS/_top.html
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808581
Title:
cannot print to
I ran commands:
sudo lpadmin -p mx860 -v socket://192.168.1.87:9100 -E -P
/etc/cups/ppd/MX860.ppd
and
lp -d mx860 /etc/nsswitch.conf
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808581
Title:
Migrated upstream to: https://gitlab.gnome.org/GNOME/gsettings-desktop-
schemas/issues/4
** Changed in: gdm
Importance: Medium => Undecided
** Changed in: gdm
Status: Expired => New
** Changed in: gdm
Remote watch: GNOME Bug Tracker #785855 => None
--
You received this bug
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: gnome-shell (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1785600
Title:
Still seems to be an issue; I tried 4.18.16 on 18.10 and it didn't help
(nor did the most recent 4.19 kernel in UKUU).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1752165
Title:
TB16 dock freezes
** Description changed:
+ After entering username and password, gnome3 never loads, and instead
+ you are stuck on a blank screen. Switching tty doesn't work. Sometimes
+ gdm3 doesn't even load and the blank screen happens before you can try
+ to log in. Without a workaround, you are forced to
I am also affected by this problem.
Made a workaround by downloading curl3 and passing it manually to anything that
needs it. (Replace the original with a shell script that calls this.)
`LD_LIBRARY_PATH=$HOME/mylib/curl3:$LD_LIBRARY_PATH application_name`
--
You received this bug notification
Hello I want fix this
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1766945
Title:
(EFI on top of legacy install) choosing "replace" or "resize" options
in partitioning may lead to an install
Thanks.
Ok, there is no port 9100, so socket:// will not work. One lives and
learns!
Looking at the error_log again all the filters complete successfully:
D [14/Dec/2018:13:16:23 -0600] [Job 478] 4 filters for job:
D [14/Dec/2018:13:16:23 -0600] [Job 478] bannertopdf
Upstream kernel commit
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/input/mouse/elan_i2c_core.c?id=13c1c5e4d7f887cba36c5e3df3faa22071c1469f
Should fix this
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Also, I'm not able to use CLIPIT app on my ubuntu 18.10. I would like to
know when will fix this issue?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1793780
Title:
Clipit broken on Cosmic
To
I get no output. It runs for about 5 seconds and returns to the prompt:
kim@kim-MS-7865:/usr/lib/cups/backend$ /usr/lib/cups/backend/cnijnet
kim@kim-MS-7865:/usr/lib/cups/backend$
Note that I changed the executable file name. I could not fine either
cnijjet or cnijet.
--
You received this bug
Hi, thanks for the reply. The touchpad stopped working and was
completely unresponsive and was reactivated by the subsequent
suspend/resume. (The trackpoint was working all the time) Is there an
advanced logging which i could activate?
--
You received this bug notification because you are a
I was experiencing this issue for around 1 year, always repeated
irregularly. Allienware 13 with Samsung SDD. Over 7 times
reinstallation, changed SSD twice.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
[Expired for Ubuntu because there has been no activity for 60 days.]
** Changed in: ubuntu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798215
Title:
No idea
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]
** Changed in: linux (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798160
[Expired for libreoffice (Ubuntu) because there has been no activity for
60 days.]
** Changed in: libreoffice (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]
** Changed in: linux (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798082
[Expired for grub2 (Ubuntu) because there has been no activity for 60
days.]
** Changed in: grub2 (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1796076
[Expired for calamares-settings-ubuntu (Ubuntu) because there has been
no activity for 60 days.]
** Changed in: calamares-settings-ubuntu (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
[Expired for mariadb-10.1 (Ubuntu) because there has been no activity
for 60 days.]
** Changed in: mariadb-10.1 (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
[Expired for galternatives (Ubuntu) because there has been no activity
for 60 days.]
** Changed in: galternatives (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Changed in: iputils (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808611
Title:
chamelon
To manage notifications about this bug go to:
** Changed in: nvidia-graphics-drivers-304 (Ubuntu)
Status: In Progress => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1724871
Title:
nvidia-graphics-drivers-304
** Changed in: gnome-control-center (Ubuntu)
Importance: Undecided => High
** Changed in: gnome-control-center (Ubuntu)
Status: New => Triaged
** Changed in: gnome-control-center (Ubuntu)
Importance: High => Low
--
You received this bug notification because you are a member of
Thank you for your bug report, is there a change in particular in the
new version that motivates your request?
** Changed in: thunderbird (Ubuntu)
Importance: Undecided => Wishlist
** Changed in: thunderbird (Ubuntu)
Status: New => Incomplete
--
You received this bug notification
Thank you for your bug report, that looks similar to the bug fixed in
https://github.com/iputils/iputils/pull/100
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808428
Title:
Ping of a link local
*** This bug has been marked as a duplicate of bug 1659295 ***
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1805154
Title:
glibc 2.28-0ubuntu1 ADT test failure with linux 4.19.0-5.6
To manage
** Changed in: iputils (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808610
Title:
chamelon
To manage notifications about this bug go to:
Thank you for taking the time to report this bug and helping to make
Ubuntu better. Unfortunately, we cannot work on this bug because your
description didn't include enough information. You may find it helpful
to read "How to report bugs effectively"
** Changed in: fedora
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1805154
Title:
glibc 2.28-0ubuntu1 ADT test failure with linux 4.19.0-5.6
To manage
Thank you for taking the time to report this bug and helping to make
Ubuntu better. Unfortunately, we cannot work on this bug because your
description didn't include enough information. You may find it helpful
to read "How to report bugs effectively"
** Tags removed: need-duplicate-check
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808624
Title:
package libmpg123-0:amd64 1.22.4-1 failed to install/upgrade: package
libmpg123-0:amd64 is not
Public bug reported:
Trying to fix grub but the operation fails
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: libmpg123-0:amd64 1.22.4-1
ProcVersionSignature: Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16
Uname: Linux 4.13.0-45-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.18
Please supply the output of 'lpinfo -v'
--
Brian.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808581
Title:
cannot print to Canon MX860 after upgrade to Ubuntu 18.04
To manage notifications
** Summary changed:
- my old lenovo netbook, clean format windows 7, don't know why but grub don't
want install...
+ error: efibootmgr failed to register the boot entry: Block device required.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
** Package changed: evince (Ubuntu) => djvulibre (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1778088
Title:
DjVu Files cannot be opened
To manage notifications about this bug go to:
Thank you for taking the time to report this bug and helping to make
Ubuntu better. Unfortunately, we cannot work on this bug because your
description didn't include enough information. You may find it helpful
to read "How to report bugs effectively"
** Changed in: gnome-shell (Ubuntu)
Importance: Undecided => Low
** Changed in: gnome-shell (Ubuntu)
Status: New => Triaged
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1806275
Title:
*** This bug is a duplicate of bug 1801912 ***
https://bugs.launchpad.net/bugs/1801912
** This bug has been marked a duplicate of bug 1801912
ctrl-f doesn't open the search box
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
solved - transfer to old 14 lts version, works perfectly
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808522
Title:
error: efibootmgr failed to register the boot entry: Block device
required.
*** This bug is a duplicate of bug 1801912 ***
https://bugs.launchpad.net/bugs/1801912
** This bug is no longer a duplicate of bug 1735071
Ctrl + F search disengages immediately after CTRL + F pressed
** This bug has been marked a duplicate of bug 1801912
ctrl-f doesn't open the search
"Invalid" was shown as report marked a a duplicate of #403652.
Updating link as issue still appears to be current.
** Bug watch added: GNOME Bug Tracker #403652
https://bugzilla.gnome.org/show_bug.cgi?id=403652
** Changed in: nautilus
Importance: Medium => Unknown
** Changed in: nautilus
*** This bug is a duplicate of bug 1735071 ***
https://bugs.launchpad.net/bugs/1735071
** This bug has been marked a duplicate of bug 1735071
Ctrl + F search disengages immediately after CTRL + F pressed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
*** This bug is a duplicate of bug 1735071 ***
https://bugs.launchpad.net/bugs/1735071
** This bug is no longer a duplicate of bug 1801912
ctrl-f doesn't open the search box
** This bug has been marked a duplicate of bug 1735071
Ctrl + F search disengages immediately after CTRL + F
** This bug is no longer a duplicate of bug 1801912
ctrl-f doesn't open the search box
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1735071
Title:
Ctrl + F search disengages immediately after
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: thermald (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1800446
Title:
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: xubuntu-default-settings (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I have installed Ubuntu 18.04 because I thought it must already be
stable. Then I had to find out that it is impossible to run node js 11
and mongodb 4 on the same system, just because node js 11 depends on
libcurl4 and mongodb-org 4 depends on libcurl3, and they cannot coexist.
Come on, this bug
Public bug reported:
vboxnet0 was available on the list of interfaces in previous sessions,
now it is missing even when a VirtualBox VM is running. Refreshing with
F5 has no effect.
ifconfig has vboxnet0 listed.
User is a member of wireshark group
I think a system update or update to
Are you kidding me?
Every new version receives bugfixes and securityfixes.
Do you want, that the user of an Ubuntu LTS suffer from security fixes and
annoying bugs?
I thought LTS means (security fixes and bugfixes).
https://www.thunderbird.net/en-US/thunderbird/60.3.0/releasenotes/
1 - 100 of 194 matches
Mail list logo
