[Bug 299918] Re: Cannot print duplex in intrepid with Ricoh Aficio 2060, Ricoh Aficio MPC3000 or Brother HL-4050cdn using the openprinting drivers

2008-12-01 Thread Bin Li
I tried on a fresh install of Ubuntu Intrepid, the problem does not occur on my side. The version of foomatic I tried is 4.0.0.177 and I didn't replace /usr/lib/cups/filter/pdftops The follows are the drivers on which I have tried. Ricoh Aficio 2060: pxlcolor-Ricoh, Postscript, Postscript-Ricoh,

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-09-13 Thread Bin Li
Colin, I try to backport the patch into precise to make a test, so that I can verify if it could fix the issue in 12.04. I found the code is very big difference, the patch doesn't work for precise. lp:~ubuntu-core-dev/ubuntu/saucy/grub2/saucy And I also try to build source from the latest

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-09-13 Thread Bin Li
@Colin, After download the grub2_2.00.orgi.tar.xz, it build success. And is there any clue to let this fix in precise? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1097570 Title:

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-09-13 Thread Bin Li
@Colin, I downloaded the daily-live cdimage in 20130913. 1) Secure boot Enabled. It prompt Could not open \EFI\BOOT\fallback.efi:14 then go into the recovery partition, show the restore UI. 2) Secure boot Disabled and set UEFI First in UEFI/Legacy Boot Priority It prompt Could not open

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-09-13 Thread Bin Li
Again, I tried the ubuntu-13.04-desktop-amd64.iso, just a little difference. 1) Secure boot Enabled. Just go into the recovery partition, show the restore UI. 2) Secure boot Disabled and set UEFI First in UEFI/Legacy Boot Priority It prompt Secure boot not enabled then reboot the laptop

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-09-13 Thread Bin Li
@Colin, What can I do for you to help locate the reason? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1097570 Title: grub2-signed can not find the right device when there are two

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-10-14 Thread Bin Li
Colin, Sorry for reply late, and the boot from CD is very quick, just like checking CDRom, I'll check it today. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1097570 Title: grub2-signed can not

[Bug 1216781] Re: System got froze after resume from screen off

2013-10-14 Thread Bin Li
** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1216781 Title: System got froze after resume from screen off To manage

[Bug 1216781] Re: System got froze after resume from screen off

2013-10-14 Thread Bin Li
Sorry for not update the tag after #12. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1216781 Title: System got froze after resume from screen off To manage notifications about this bug go to:

[Bug 1240360] [NEW] Rename boot option from recovery mode to safe mode in GRUB menu

2013-10-16 Thread Bin Li
Public bug reported: This is a request from OEM. OEM request to rename the boot option from recovery mode to safe mode in GRUB menu. It's more sensible for user. ** Affects: grub Importance: Undecided Status: New ** Affects: grub2 (Ubuntu) Importance: Undecided

[Bug 1240360] Re: Rename boot option from recovery mode to safe mode in GRUB menu

2013-10-16 Thread Bin Li
** Also affects: grub Importance: Undecided Status: New ** Also affects: oem-priority Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1240360

[Bug 1240360] Re: Rename boot option from recovery mode to safe mode in GRUB menu

2013-10-16 Thread Bin Li
I made a patch for this issue. Define GRUB_RECOVERY_MODE_RENAME_SAFE_MODE in /etc/default/grub, when it's true, it will rename to safe mode ** Patch added: rename_recovery_mode.patch https://bugs.launchpad.net/oem-priority/+bug/1240360/+attachment/3879028/+files/rename_recovery_mode.patch

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-10-17 Thread Bin Li
Collin, I just download the 20131016.1 daily live cdimage, and record it into DVD, then boot up from CDRom. When secure boot is disabled, and UEFI first, it's just hang after the error: variable 'root' isn't set. When secure boot is enabled, it will boot up to recovery partition, I can hear

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-10-17 Thread Bin Li
And I create a bootable USB with the same image, when boot up from USB, it works fine. Filesystem Size Used Avail Use% Mounted on /cow1.8G 42M 1.8G 3% / udev1.8G 4.0K 1.8G 1% /dev tmpfs 368M 1.2M 367M 1% /run /dev/sdb1 4.0G 892M 3.2G

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-10-17 Thread Bin Li
@Collin, And I also verify by 4$'s comment in #13, I can see every menu entry of grub with the suffix 'from recovery partition'. Might be the original issue is fixed. But from the title, the issue from DVD image also caused by the partition which has .disk, so should I open a new one for the

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-10-17 Thread Bin Li
And it's easy to reproduce. * Reproduce Steps is almost same in description. from 1-7, you can't create a partition which have .disk and /boot/grub/grub.cfg 8. Use `brasero` to write saucy-desktop-amd64.iso to DVD disc. 9. Reboot and select the boot entry 'ATAPI CD0: PLDS DVD-RW DS8A9SH' from

[Bug 1216781] Re: System got froze after resume from screen off

2013-10-08 Thread Bin Li
I just upgrade the package from precise-propose, and verified it, it works fine for use. And I also compared the used memory and cpu, it looks same. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1184344] Re: usb-creator-gtk crashes on GLib.py:53

2013-06-07 Thread Bin Li
I also met this issue today, when I try it again, it disappeared. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1184344 Title: usb-creator-gtk crashes on GLib.py:53 To manage notifications about

[Bug 912702] Re: [MASTER] Endlessly many Wireless Network Authentication Required dialogs put up

2013-03-12 Thread Bin Li
Marius, From #25, I found the patch from upstream is not related to this issue. commit e78c3e83d2e0b49641c9d484e0b35b3c6ff9f0db Author: Alban Browaeys pra...@yahoo.com Date: Wed Jan 2 10:37:36 2013 +0100 build: negate the grep result. Not the echo result.

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-12-02 Thread Bin Li
@Colin, I del the grub.cfg in recovery partition, after that it will enter grub shell. from the result, I thought the $prefix is zero or not exist. grub cat (memdisk)/grub.cfg if [ -z $prefix -o ! -e $prefix ]; then if ! search --file --set=root /.disk/info; then

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-12-02 Thread Bin Li
@Colin, And another issue when I run 'search --file /.disk/info' in grub-shell, it will reboot my laptop. Is it a bug? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1097570 Title:

[Bug 1253050] Re: localechooser set wrong language

2013-12-03 Thread Bin Li
Ara, Sorry for reply late, maybe it's hard to reproduce, we use the private project(watauga). And now we find a way to avoid it, to set the language in ubuntu-bootstrap. I thought we could close it or set it as invalid. -- You received this bug notification because you are a member of

[Bug 1240360] Re: Rename boot option from recovery mode to safe mode in GRUB menu

2013-12-06 Thread Bin Li
Adam, Great to hear about it. I'll verify it next week, :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1240360 Title: Rename boot option from recovery mode to safe mode in GRUB menu To manage

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-12-10 Thread Bin Li
@Adam, After test it in precise-proposed, I found the signed efi image is still 3.10, while not ubuntu3.14. Could you help update this file? Thanks! http://archive.ubuntu.com/ubuntu/dists/precise-proposed/main/installer- amd64/current/images/cdrom/debian-cd_info.tar.gz -- You received this

[Bug 1240360] Re: Rename boot option from recovery mode to safe mode in GRUB menu

2013-12-10 Thread Bin Li
I've built a new image with precise-proposed repo, and use GRUB_RECOVERY_TITLE in /etc/default/grub, it works fine. The grub version is 1.99-21ubuntu3.14. Thanks all of you guys! ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification

[Bug 1178618] Re: --hotkey option does not work when the menu is hidden

2013-12-11 Thread Bin Li
I verified this issue. First I change the /etc/grub.d/20_memtest86+ like below. -menuentry Memory test (memtest86+) { +menuentry Memory test (memtest86+) --hotkey f9{ After update-grub and reboot, F9 could work. Next, I change the /etc/default/grub, I added 'GRUB_TIMEOUT_STYLE=hidden' After

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-12-11 Thread Bin Li
And anyway, from the daily build image, we still met this issue. Form #21, looks like the $prefix is zero or not exist, so I'll set it as verification-failed. ** Tags removed: verification-needed ** Tags added: verification-failed -- You received this bug notification because you are a member

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-12-12 Thread Bin Li
@Collin, Thanks a lot! And a question, is there a way to check the $prefix's value before search? And the $prefix was set by grub-mkimage with '-p' parameter? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1262528] Re: ubiquity crash when hostname is too long

2013-12-18 Thread Bin Li
Here is the patch to fix the check_hostname function. ** Patch added: check_hostname.patch https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1262528/+attachment/3932410/+files/check_hostname.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is

[Bug 1262528] [NEW] ubiquity crash when hostname is too long

2013-12-18 Thread Bin Li
Public bug reported: Here is the trace log in precise-updates. Exception in GTK frontend (invoking crash handler): Traceback (most recent call last): File /usr/lib/ubiquity/plugins/ubi-usersetup.py, line 394, in info_loop self.hostname_error(make_error_string(self.controller, errors)) File

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2013-12-19 Thread Bin Li
Colin, Thanks a lot! And I thought the new package have improvement, it's the direction which fix our issue, I mark as verificaiton-done. Next I prepare open a new bug to find why the prefix not set correctly with the clue from #31. Thanks all you guys!! ** Tags removed: verification-failed

[Bug 1253050] Re: localechooser set wrong language

2013-11-20 Thread Bin Li
change package ** Package changed: grub2 (Ubuntu) = localechooser (Ubuntu) ** Also affects: localechooser Importance: Undecided Status: New ** Also affects: oem-priority Importance: Undecided Status: New -- You received this bug notification because you are a member of

[Bug 1253050] [NEW] localechooser set wrong language

2013-11-20 Thread Bin Li
Public bug reported: When I use ubiquity, I found the tpl_di_language is set a wrong value en_US:, after dig it I found when LANGUAGELIST is null, it will be set to this value. Another question is why we set 'en_US' in language, while not 'en', when I use get_current_language, it will return

[Bug 1253050] Re: localechooser set wrong language

2013-11-20 Thread Bin Li
Gunnar, Thanks for your quick reply. Now I just ignore it, this should be a ugly fixes. if [ $LOCALE != C ] \ - [ $LANGUAGE ] [ $COUNTRYCODE ] \ + [ $LANGUAGE ] [ $LANGUAGELIST ] [ $COUNTRYCODE ] \ [ $COUNTRYCODE !=

[Bug 1240360] Re: Rename boot option from recovery mode to safe mode in GRUB menu

2013-11-28 Thread Bin Li
@Colin, And I found you use gettext for support i18n, I'm still a little confused how to let it work, when we set 'safe mode' for GRUB_RECOVERY_TITLE, how we update the po file in grub? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed

[Bug 1240360] Re: Rename boot option from recovery mode to safe mode in GRUB menu

2013-11-28 Thread Bin Li
@Colin, Great! And I thought it could satisfy our issue. Set the GRUB_RECOVERY_TITLE in /etc/default/grub and update grub. Thanks a lot! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1240360

[Bug 1263129] [NEW] prefix is not set correctly in grub2

2013-12-20 Thread Bin Li
Public bug reported: This bug report based on lp:1097570 . An $prefix was introduced to fix grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'. But after dig, I had an recovery partition(hd0,1) which had '.disk/info', and when start the

[Bug 1095001] Re: [regression] compiz spends 31% of its CPU time in regexec()

2013-08-26 Thread Bin Li
Hi, After use compiz with this patch, I found the password dialog won't show in gnome-screensaver after the screen turn off when inactive for sometimes. The bug #1207639 is caused by this one. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed

[Bug 1095001] Re: [regression] compiz spends 31% of its CPU time in regexec()

2013-08-26 Thread Bin Li
Daniel, What I mean is that after I upgrade from 1:0.9.7.12-0ubuntu1 to 1:0.9.7.12-0ubuntu2, I met the issue which password dialog can't show up, you can also input the password, then it will login into the desktop. I also find the #1053895 in 0.9.9 might be a fix for our issue. -- You

[Bug 1167321] Re: [12.04 only] Allow Mesa 9.0.x point releases to have unredirection enabled also on intel and nouveau

2013-08-26 Thread Bin Li
Allow Mesa 9.0.x point releases, we found the screensaver couldn't show unlock interface when back from screen off. Please view bug 1216781 for more information. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1095001] Re: [regression] compiz spends 31% of its CPU time in regexec()

2013-08-26 Thread Bin Li
Daniel, I find the the reason, the blacklist_precise_mesa80_intel_nouveau.patch allow 9.0.x Mesa, if I edit the /usr/share/compiz/opengl.xml, and remove the '$', the issue disappeared. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to

[Bug 1334546] Re: The search engine is hardcoded in webbrowser-app

2014-07-04 Thread Bin Li
@Olivier, Today I tested it, I use 'adb shell' to enter shell. I made the dirs in .config and .local, and set it as duckduckgo as search engine, after that I change the owner and permission of directory and files. Then I reboot my Nexus 4, and open browser, input haha at address bar, found

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-04-03 Thread Bin Li
I've finished the SRU information, feel free to contact me if need any other information. Thanks! ** Description changed: gnome-control-center 1:3.4.2-0ubuntu0.13.1 in precise updates. In laptop you can't reproduce this issue, cause there have 'Internal Microphone' already. - I find this

[Bug 1291862] [NEW] [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-13 Thread Bin Li
Public bug reported: gnome-control-center 1:3.4.2-0ubuntu0.13.1 in precise updates. In laptop you can't reproduce this issue, cause there have 'Internal Microphone' already. I find this issue im my PC, there are two jacks in front panel, input and output. 1. Install system and log in to

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-13 Thread Bin Li
I can change the setting when plug micphone before start 'gnome-control-center sound-nua'. And also I can change it from pavucontrol. The sound-nua couldn't call the update function to update input_bar. ** Changed in: gnome-control-center (Ubuntu) Status: Incomplete = New -- You

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-13 Thread Bin Li
This patch fix two issue, it resolve this issue, but I'm an newer for gnome-control-center, so mightbe there are better fix for this issue. After add the input device, I called 'active_input_update', the input_bar could be adjusted. The second fix is when we plug out the device, the input_bar is

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-13 Thread Bin Li
After talked with Huiwang, we updated the patch. When the input device list is null ,we reset the original value for label. Index: gnome-control-center-3.4.2/panels/sound-nua/gvc-mixer-dialog.c --- gnome-control-center-3.4.2.orig/panels/sound-nua/gvc-mixer-dialog.c 2014-03-13 16:16:03.291570375

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-13 Thread Bin Li
** Also affects: gnome-control-center Importance: Undecided Status: New ** Also affects: oem-priority Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-14 Thread Bin Li
Ara, I install the 14.04, and find there are use 'unity-control-center sound' for change sound setting. First run 'unity-control-center sound', and insert the microphone in front panel, the input bar could be adjusted. But when I plug out the microphone, the input bar is still enabled, and you

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-17 Thread Bin Li
For trusty, I made a patch to disable input bar when there are no input devices. ** Also affects: unity-control-center (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-17 Thread Bin Li
For precise, I made an merge request for it. * Add fix-input-device-bar-status.patch (LP: #1285974) First enable input bar when an new input device is added, backport from unity-control-center. Second, disable input bar when there are not input devices. -- You received this bug

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-03-19 Thread Bin Li
Sebastien, Follow your advice, I report an bug to bgo. Thanks! https://bugzilla.gnome.org/show_bug.cgi?id=726686 ** Bug watch added: GNOME Bug Tracker #726686 https://bugzilla.gnome.org/show_bug.cgi?id=726686 -- You received this bug notification because you are a member of Ubuntu Bugs,

[Bug 1291862] Re: [soundnua]mic volume adjust bar is gray if you open sound-nua input tab earlier than plugging micphone

2014-04-14 Thread Bin Li
Brian, Sorry for late, I've updated the package to gnome-control-center 1:3.4.2-0ubuntu0.13.2, and it works fine. Thanks! ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to

[Bug 1381625] [NEW] Adjust brightness to lowest value caused screen whole black

2014-10-15 Thread Bin Li
Public bug reported: When using F2 hotkey to adjust screen brightness to lowest value, it truns screen backlight off. Steps: 1. Press F2 to adjust screen brightness to lowest value Expected results: There is still screen backlight Actual results: Sceen backlight is turned off ** Affects:

[Bug 1311515] Re: Touchpad pinch zoom-in/zoom-out detection is sometimes reversed

2014-10-08 Thread Bin Li
L.D What's script do you run? Do you need more information? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1311515 Title: Touchpad pinch zoom-in/zoom-out detection is sometimes reversed

[Bug 1311515] Re: Touchpad pinch zoom-in/zoom-out detection is sometimes reversed

2014-10-12 Thread Bin Li
LD, I thought the error is in configSynapticsMy.sh, could you paste the content of it? The synaptics.sh looks good, and it just show the touchpad was drived correctly. Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1311515] Re: Touchpad pinch zoom-in/zoom-out detection is sometimes reversed

2014-10-13 Thread Bin Li
Sorry for my wrong format with the input and output, you just change your configSynapticsMy.sh like below. Then it could work, and the other line is the output of below command. Thanks! #!/bin/sh xinput list-props SynPS/2 Synaptics TouchPad -- You received this bug notification because you

[Bug 1311515] [NEW] Touchpad pinch zoom-in/zoom-out detection is sometimes reversed

2014-04-23 Thread Bin Li
Public bug reported: [Test details] Image: 14.04 LTS Platforms: ThinkPad-Edge-E531:~$ dmesg | grep -i syn [4.135984] hda_codec: Enable sync_write for stable communication [4.846020] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00,

[Bug 1311515] Re: Touchpad pinch zoom-in/zoom-out detection is sometimes reversed

2014-04-23 Thread Bin Li
xinput list-props SynPS/2 Synaptics TouchPad Device 'SynPS/2 Synaptics TouchPad': Device Enabled (135): 1 Coordinate Transformation Matrix (137): 1.00, 0.00, 0.00, 0.00, 1.00, 0.00, 0.00, 0.00, 1.00 Device Accel Profile (260): 1

[Bug 1311552] [NEW] System always entering image media after finish the recovery without the installer media unplugged.

2014-04-23 Thread Bin Li
Public bug reported: This bug from OEM project which support recovery media. 1. Create one USB disk with the 14.04's oem image 2. Make a USB key startup disk. 3. Install the system with the usb key. 4. Don't plug out the USB disk after the recovery completed. Actual results: System always

[Bug 1311552] Re: System always entering image media after finish the recovery without the installer media unplugged.

2014-04-23 Thread Bin Li
I just reviewed the source code util/grub-install.c if (uuid) { fprintf (load_cfg_f, search.fs_uuid %s root , uuid); grub_install_push_module (search_fs_uuid); } After that why we use

[Bug 1311552] Re: System always entering image media after finish the recovery without the installer media unplugged.

2014-04-23 Thread Bin Li
After I remove the grub.cfg in U-disk, and reboot it again, it will enter into the grub shell. GRUB version 2.02~beta2-8. grub echo $prefix (hd0,msdos1)/boot/grub grub ls (memdisk) (hd0) (hd0,msdos2) (hd0,msdos1) (hd1) (hd1,gpt2) (hd1,gpt1) (cd0) grub cat (hd1,gpt1)/efi/boot/grub.cfg

[Bug 1311552] Re: System always entering image media after finish the recovery without the installer media unplugged.

2014-04-23 Thread Bin Li
GRUB version 2.02~beta2-9 also have the same issue. When you insert the U-disk, it can't assure the hd0 is hard disk, sometimes it's U-disk, and this is the root cause of this issue. ** Also affects: grub Importance: Undecided Status: New ** Also affects: oem-priority Importance:

[Bug 1394855] [NEW] XDG_CACHE_HOME can't work for create new emulator

2014-11-20 Thread Bin Li
Public bug reported: I create a new directory to save the download ubuntuimages. so that each user could use the same image without download it by each user. When I try to create a new emulator, it will download the ubuntuimages. sudo ubuntu-emulator create ubuntu --arch=i386

[Bug 1394858] [NEW] XDG_DATA_HOME can't work ubuntu-emulator

2014-11-20 Thread Bin Li
Public bug reported: XDG_DATA_HOME used for saving emulator which user created. sudo ubuntu-emulator create helloworld --arch=i386 --channel=ubuntu- touch/ubuntu-rtm/14.09 After that the emulator would be saved in below directory. .local/share/ubuntu-emulator/helloworld. So I set the

[Bug 1394859] [NEW] ubuntu-sdk can't find emulator when change XDG_DATA_HOME

2014-11-20 Thread Bin Li
Public bug reported: XDG_DATA_HOME used for saving emulator which user created. When I change the XDG_DATA_HOME I found the ubuntu-sdk can't locate the emulator corretly. It still look for the emulators in '.local/share/ubuntu-emulator/'. And 'ubuntu-emulator list' could show the emulators

[Bug 1394858] Re: XDG_DATA_HOME can't work ubuntu-emulator

2014-11-26 Thread Bin Li
Vicamo, Yes, that's the reason. You cant just write a simple test. when use it with sudo it can't anything. :) -- $cat test.sh #!/bin/bash echo $XDG_DATA_DIRS -- Could we find another way to set the DATA_HOME? Thanks!

[Bug 1371625] Re: wifi don't work after suspend

2014-10-31 Thread Bin Li
I find a way to easy reproduce it. gdbus call --system --dest org.freedesktop.login1 --object-path /org/freedesktop/login1 --method org.freedesktop.login1.Manager.HybridSleep true -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1390476] Re: Provide a way to set a custom password on emulator creation

2014-11-17 Thread Bin Li
Now it could prompt set the pincode, but after that it can't login with the pincode which I set, and the valid pincode is still ''. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390476 Title:

[Bug 1354259] Re: gnome maps blocks the desktop view until the app is closed

2014-08-29 Thread Bin Li
Hiren, It works fine on my laptop, I found you use VM, might be related to it, not sure. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1354259 Title: gnome maps blocks the desktop view until the

[Bug 1381625] Re: Adjust brightness to lowest value caused screen whole black

2014-12-17 Thread Bin Li
** Changed in: oem-priority Importance: Undecided = High -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1381625 Title: Adjust brightness to lowest value caused screen whole black To manage

[Bug 1394858] Re: XDG_DATA_HOME can't work ubuntu-emulator

2014-12-23 Thread Bin Li
Vicamo, Yes, :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1394858 Title: XDG_DATA_HOME can't work ubuntu-emulator To manage notifications about this bug go to:

[Bug 1394858] Re: XDG_DATA_HOME can't work ubuntu-emulator

2014-12-23 Thread Bin Li
XDG_CACHE_HOME also have the same issue. https://bugs.launchpad.net/ubuntu/+source/phablet-tools/+bug/1394855 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1394858 Title: XDG_DATA_HOME can't work

[Bug 1314471] Re: [SRU] Update ubuntu-kylin-software-center to 0.2.9.6

2014-12-29 Thread Bin Li
@Aron, Do you upload again? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1314471 Title: [SRU] Update ubuntu-kylin-software-center to 0.2.9.6 To manage notifications about this bug go

[Bug 1415792] Re: After install ubuntukylin-theme the grub can't be updated

2015-02-03 Thread Bin Li
I will work on it, :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1415792 Title: After install ubuntukylin-theme the grub can't be updated To manage notifications about this bug go to:

[Bug 1319698] Re: Gallery app shows pictures abnormally if target directory or file name contained Chinese text .

2015-02-03 Thread Bin Li
@Jussi, Cool!!! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1319698 Title: Gallery app shows pictures abnormally if target directory or file name contained Chinese text . To manage

[Bug 1319698] Re: Gallery app shows pictures abnormally if target directory or file name contained Chinese text .

2015-02-03 Thread Bin Li
@Jussi, Could you help to put it into trusty? Thanks! ** Changed in: oem-priority Status: Fix Released = New ** Also affects: oem-priority/trusty Importance: Undecided Status: New ** Changed in: oem-priority/trusty Importance: Undecided = High ** Changed in:

[Bug 1418909] Re: [SRU]After install ubuntukylin-theme the grub can't be updatedAfter install ubuntukylin-theme the grub can't be updated

2015-02-06 Thread Bin Li
** Also affects: oem-sru-workflow Importance: Undecided Status: New ** No longer affects: oem-sru-workflow -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1418909 Title: [SRU]After install

[Bug 1415792] Re: After install ubuntukylin-theme the grub can't be updated

2015-02-06 Thread Bin Li
@Anthony, I've opened a new bug for SRU process. https://bugs.launchpad.net/ubuntukylin-theme/+bug/1418909 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1415792 Title: After install

[Bug 1418909] [NEW] [SRU]After install ubuntukylin-theme the grub can't be updatedAfter install ubuntukylin-theme the grub can't be updated

2015-02-06 Thread Bin Li
Public bug reported: [Impact] After user remove this package, the grub-theme can't be updated. We met this issue in OEM project. [Test Case] Just remove or install the package, you will find the grub-theme was not updated. [Regression Potential] No, we just do a 'update-grub' after the

[Bug 1319698] Re: Gallery app shows pictures abnormally if target directory or file name contained Chinese text .

2015-02-08 Thread Bin Li
After test the new 1.1+14.04.20150205-0ubuntu1 libthumbnailer0 in trusty-proposed, it works fine. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1319698 Title: Gallery app shows pictures abnormally

[Bug 1415792] Re: [SRU]After install ubuntukylin-theme the grub can't be updated

2015-02-12 Thread Bin Li
@Anthony, Could you help contact the SRU team to push it ? Thank! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1415792 Title: [SRU]After install ubuntukylin-theme the grub can't be updated To

[Bug 1319698] Re: Gallery app shows pictures abnormally if target directory or file name contained Chinese text .

2015-01-26 Thread Bin Li
@Arthur, Yes, thanks for your feedback. @jpakkane, @Jussi Do we prepare to fix it for trusty? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1319698 Title: Gallery app shows pictures

[Bug 1228462] Re: image build failed due to the grub-probe operation

2015-01-27 Thread Bin Li
@zhangchao, Where do we call the update-grub? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1228462 Title: image build failed due to the grub-probe operation To manage notifications

[Bug 1415792] Re: After install ubuntukylin-theme the grub can't be updated

2015-01-29 Thread Bin Li
I made a merge request, which is works fine in OEM project. :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1415792 Title: After install ubuntukylin-theme the grub can't be updated To manage

[Bug 1415792] Re: After install ubuntukylin-theme the grub can't be updated

2015-01-29 Thread Bin Li
zhangchao, Thanks for your quick work, could we also merge it into trusty and push it to trusty-updates channel? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1415792 Title: After install

[Bug 1415792] Re: After install ubuntukylin-theme the grub can't be updated

2015-01-29 Thread Bin Li
Cool, hope it in updates channel quickly. :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1415792 Title: After install ubuntukylin-theme the grub can't be updated To manage notifications about

[Bug 1409596] [NEW] ubuntu-sdk can't find other emulators when meet no '.device' error

2015-01-11 Thread Bin Li
Public bug reported: I used ubuntu-emulator to create several emualtors, and I terminate one when the emulator creating with 'Ctrl + C'. After that there are just 'sdcard.img' and 'ubuntu-system.img' in emulator's directory. And when I start up ubuntu-sdk, in 'Devices' Tab, there are a 'cat:'

[Bug 1319698] Re: Gallery app shows pictures abnormally if target directory or file name contained Chinese text .

2015-01-08 Thread Bin Li
@Arthur, From Ara says we need it for our pre-installed Ubuntu Desktop, and we use the trusty, do we prepare to fix it for trusty? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1319698

[Bug 1381625] Re: Adjust brightness to lowest value caused screen whole black

2015-01-09 Thread Bin Li
Timo, Thanks for you quick look. Here is the original bugs. :) https://bugs.launchpad.net/stella/+bug/1281379 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1381625 Title: Adjust brightness to

[Bug 1382291] Re: Account creation during first boot of an OEM image needs to scale based on resolution

2015-02-11 Thread Bin Li
@Bruce, For vivid you need push you own project in lp:~bruce.ma/unity-settings- daemon/support-hidpi-lp1382291 and merge it into lp:unity-settings- daemon. For trusty you need based on lp:unity-settings-daemon/14.04 . -- You received this bug notification because you are a member of Ubuntu

[Bug 1097570] Re: grub2-signed can not find the right device when there are two filesystems containing the file '.disk/info'.

2015-03-12 Thread Bin Li
Now in Lenovo's laptop, we still meet this issue on trusty(14.04.2). I delete the grub.cfg in recovery partition, after that it will enter grub shell. from the result, I thought the $prefix is zero or not exist. grub cat (memdisk)/grub.cfg if [ -z $prefix -o ! -e $prefix ]; then if !

[Bug 1182784] Re: Install with non English language fails on Keyboard: ubi-console-setup failed with exit code 141 or Installer Crashed

2015-03-10 Thread Bin Li
@Jonathan, I can't find the code 2.18.8.7 which is in updates channel, now it is 2.18.8.6 in below link. lp:~ubuntu-installer/ubiquity/trusty-proposed/ Could you help to update it? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to

[Bug 1389099] Re: microphone mute icon support

2015-03-05 Thread Bin Li
Hi, guys. When could we backport to trusty? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1389099 Title: microphone mute icon support To manage notifications about this bug go to:

[Bug 1415792] Re: [SRU]After install ubuntukylin-theme the grub can't be updated

2015-02-26 Thread Bin Li
It's good for OEM image. :) ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1415792 Title: [SRU]After install ubuntukylin-theme

[Bug 1401620] Re: casper needs to handle the overlayfs workdir in later kernels

2015-03-23 Thread Bin Li
Andy, I met this issue in oem image, so do you have any plan to backport to 14.04.3 recently? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1401620 Title: casper needs to handle the

[Bug 1412411] Re: casper needs to handle the overlayfs V2 format (overlay filesystem type) in later kernels

2015-04-14 Thread Bin Li
Andy, We need it in trusty, could help to backport it? Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1412411 Title: casper needs to handle the overlayfs V2 format (overlay filesystem

[Bug 1449917] [NEW] camera-app can't work in vivid

2015-04-29 Thread Bin Li
Public bug reported: the version is 3.0.0+15.04.20150313-0ubuntu1, it's black screen. cheese 3.14.1-2ubuntu4 works fine. And also below command works fine. $ gst-launch-1.0 v4l2src ! xvimagesink ** Affects: camera-app Importance: Undecided Status: New ** Affects: camera-app

[Bug 1452238] [NEW] Failed to upgrade system from 14.04

2015-05-06 Thread Bin Li
Public bug reported: Download and install the 14.04 image. http://cdimage.ubuntu.com/ubuntu/releases/14.04/release/ubuntu-14.04-desktop-amd64+mac.iso $ sudo apt-get update $ sudo apt-get upgrade . Processing triggers for desktop-file-utils (0.22-1ubuntu1) ... Processing triggers for

[Bug 1452238] Re: Failed to upgrade system from 14.04

2015-05-06 Thread Bin Li
Jonathan, Yes, it could resolve it. But it's not a better solution for it, it would be better that we find the root cause and fix it in ifupdown. :D -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

  1   2   3   4   5   >