This is a kernel bug and it is still not fixed in the latest Ubuntu 8.04
LTS.
/mnt/temp is a CIFS mount:
root@ubuntu8:~# cp -p /etc/services /mnt/temp/
root@ubuntu8:~# ls -la /etc/services /mnt/temp/services
-rw-r--r-- 1 root root 18274 2007-12-03 23:04 /etc/services
-rw-r--r-- 1 root root
:0 (0.0 b) TX bytes:0 (0.0 b)
as a workaround, I put the command
ifconfig lo up
at the end of /etc/init.d/bootmisc.sh
Stefan
** Affects: Ubuntu
Importance: Untriaged
Status: Unconfirmed
--
[dapper update] loopback device not startet
https://launchpad.net
255.255.255.0
+ 16 gateway 192.168.0.1
+ 17
+
+ --
+
Stefan
--
[dapper update] loopback device not startet
https://launchpad.net/bugs/56746
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
I have problems to run rhythmbox under xubuntu 6.06 because it is very slow.
Using strace rhythmbox, I get the following output:
(...)
open(/dev/scd0, O_RDWR|O_NONBLOCK|O_EXCL|O_LARGEFILE) = 25
ioctl(25, CDROM_DRIVE_STATUS, 0x7fff) = 2
close(25)
Same problem here after upgrading from hardy to intrepid. Asus P5E-VM
motherboard with Intel G35 graphics hooked up by straight HDMI to a
Panasonic TC32VX700 LCD TV. TMDS-1 used to be recognized by default and
worked fine, but now the digital output is recognized as HDMI-1, and
monitor settings
Yes, please nominate the patch for Hardy.
--
cp -p on CIFS mount does not preserve timestamp
https://bugs.launchpad.net/bugs/276472
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
For others with the same problem, I found out what the problem was, at
least in my case.
I had the very same issue as reported here for a good while, an obsolete
tzdata-java was dependent on tzdata=2008b-1ubuntu1, preventing
installation of both openjdk-6 and an up to date tzdata. Apparently the
Yea, I have the same problem too. It is really weird.
--
Help document references dosfslabel, which isn't available
https://bugs.launchpad.net/bugs/184639
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I have the very same problem with evolution-2.22.0-0ubuntu2 but not only
through mailto:; links in firefox or other software.
Evolution just *never* does use my bcc setting (neither does he use my
cc: setting), may I create a new email or reply to an existing one.
This bug is very similar, so is
It does in Gutsy Gibbon. I'm on Hardy Heron now, but I don't know
whether it still happens, and since I have not backed up my data yet, I
do not intend to try it out anytime soon...
Yes, it might also be a bug in Vista. But Vista operates correctly when
it's own boot manager manges the boot
I'm having the same problem. I can see and pair with the headset but
don't get an additional audio device created. So I can't really use my
headset. It worked fine for me under dapper and feisty.
Hope this is gonna be fixed soon. If I can help by giving additional
information, please let me know!
BTW, it also worked fine under Gutsy. I'm know running on up-to-date
Hardy
--
[Hardy] Bluetooth-applet sees BT headset and pairs, does not show under audio
https://bugs.launchpad.net/bugs/199266
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
after installing hardy on my compaq nx9110, hardy could not reboot, but
got stuck after restart with a blank screen. Using safe mode showed it
gets stuck when it comes to b43legacy. Any ideas how to fix this? I can
run hardy now in safe mode, but not boot normally.
--
b43legacy driver missing in
same problem here with compaq nx9110 broadcom 4303...
Shouldn't this bug remain open, as there is no fix, just a workaround yet,
which does not actually provide the intended functionality?
Have a good day even without the wireless
--
Impossible to boot with latest kernel version
it is working again on kde4 :)
--
org.freedesktop.hal error when trying to mount external media
https://bugs.launchpad.net/bugs/164365
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
i have the same problem on kde4.
so it is not fixed for kde in general.
--
org.freedesktop.hal error when trying to mount external media
https://bugs.launchpad.net/bugs/164365
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
Public bug reported:
Binary package hint: firefox-3.0
connect to webradio abort with error message:
Failed to connect stream: Invalid argument
Ubuntu 804
firefox 3 beta5
ProblemType: Bug
Architecture: amd64
Date: Fri Jun 6 08:27:17 2008
DistroRelease: Ubuntu 8.04
NonfreeKernelModules: fglrx
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/15075753/Dependencies.txt
** Attachment added: profiles.ini.txt
http://launchpadlibrarian.net/15075754/profiles.ini.txt
--
Webradio do nor open. Errormessage: Failed to connect stream: Invalid argument
/ ubuntu 8.04;
I did try sudo touch /etc/libuser.conf previously without success but it did
it this time.
Thanks so much
I LOVE UBUNTU
** Attachment added: unnamed
http://launchpadlibrarian.net/14499616/unnamed
--
system-config-samba.py crashed with SystemError in __init__()
On my Compaq nx 9110, I can now boot without a problem or blacklisting
drivers, however the wireless still does not detect any networks, or
shows any sign of life.
--
Loading b43legacy freezes computer
https://bugs.launchpad.net/bugs/192720
You received this bug notification because you are a
Here is my relevant part from the dmesg output - any help is much
appreciated, thanks:
27.508169] ssb: Core 0 found: IEEE 802.11 (cc 0x812, rev 0x02, vendor 0x4243)
[ 27.508175] ssb: Core 1 found: PCMCIA (cc 0x80D, rev 0x00, vendor 0x4243)
[ 27.508180] ssb: Core 2 found: Fast Ethernet (cc
this I can start everything without any problems and it seems
that there is no programme having any defects!
regards Stefan
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
Problems with standby! Getting a warning! Feisty!
https://bugs.launchpad.net/bugs/110071
You
kern.log
Maybe it can enlight the problem!
** Attachment added: dahlem
http://librarian.launchpad.net/7407946/dahlem
--
Problems with standby! Getting a warning! Feisty!
https://bugs.launchpad.net/bugs/110071
You received this bug notification because you are a member of Ubuntu
Bugs, which
Hey, thanks for your reply! Yes you are right! It is more or less the
same! Well, I haven´t found a hidden file which indicates WARNING
(gnome-session etc. yet ), but after a hibernating overnight I got this
information mentionig HAL! Sorry, but I am quite new to LINUX/Ubuntu!
Stefan
Here I found a file mentioning HAL! (Syslog)
** Attachment added: syslog/HAL
http://librarian.launchpad.net/7409615/syslog.zip
--
Problems with standby! Getting a warning! Feisty!
https://bugs.launchpad.net/bugs/110071
You received this bug notification because you are a member of Ubuntu
the same here. i always get the kdm to show up but i cannot log into
kde. (flickers and returns to kdm the first time and if i try again it
results in a total system hang)
--
xserver-xorg-video-intel does not work with 82852/855GM
https://bugs.launchpad.net/bugs/108056
You received this bug
I can confirm this behavior. I am having the same issue with my Lenovo
T60. It has the same WLAN-Adapter.
--
Wired network problem
https://bugs.launchpad.net/bugs/110546
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
Sorry, I read the whole thread and am wasn't sure if there was a fix
found for this problem?
I am on a Dell E1405 with an nvidia card and the 1390 wireless card. I
am using the nvidia beta drivers, and ndiswrapper for the wireless, and
experiencing the same bug. Any help on what to do to fix this
OK So I installed the latest kernel 2.6.20.1 with ndiswrapper 1.38 yet
still am having the same problems. I get the following in my dmesg when
I try to do any type of scanning on the wireless card:
ADDRCONF(NETDEV_UP): eth1: link is not ready
Is there something I am missing?
--
BCM1390M
Hello hello,
So this did work with the ndiswrapper. Thanks everyone for your help. I
feel like a big idiot because my problem was that my wireless adapter
was shutoff (function F2 must have been hit). Anyway works like a charm,
thanks all.
Stefan
--
BCM1390M (broadcom 4311) with ndiswrapper
dmesg
** Attachment added: dmesg
http://librarian.launchpad.net/7448413/dmesg
--
Wired network problem
https://bugs.launchpad.net/bugs/110546
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
lspci
** Attachment added: lspci
http://librarian.launchpad.net/7448414/lspci
--
Wired network problem
https://bugs.launchpad.net/bugs/110546
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
** Attachment added: daemon.log
Public bug reported:
Binary package hint: ubiquity
Traceback (most recent call last):
File /usr/lib/ubiquity/bin/ubiquity, line 210, in module
File /usr/lib/ubiquity/bin/ubiquity, line 205, in main
File /usr/lib/ubiquity/bin/ubiquity, line 58, in install
File
** Attachment added: syslog
http://librarian.launchpad.net/7476643/syslog
--
Installer Crashed
https://bugs.launchpad.net/bugs/94
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
PackageArchitecture: all
ProcCmdline: /usr/bin/python /usr/bin/hwdb-kde
ProcCwd: /home/stefan
ProcEnviron:
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
LANG=de_DE.UTF-8
SHELL=/bin/bash
Signal: 8
SourcePackage: hwdb-client
StacktraceTop:
?? () from /usr/lib/libQtGui.so
** Attachment added: CoreDump.gz
http://librarian.launchpad.net/7556123/CoreDump.gz
** Attachment added: Dependencies.txt
http://librarian.launchpad.net/7556124/Dependencies.txt
** Attachment added: Disassembly.txt
http://librarian.launchpad.net/7556125/Disassembly.txt
** Attachment
Public bug reported:
Binary package hint: xrdb
At startup
ProblemType: Crash
Architecture: i386
Date: Wed May 2 18:07:01 2007
DistroRelease: Ubuntu 7.04
ExecutablePath: /usr/bin/xrdb
Package: xrdb 1:1.0.2-0ubuntu2
PackageArchitecture: i386
ProcCmdline: xrdb -nocpp -merge
ProcCwd: /home/stefan
** Attachment added: CoreDump.gz
http://librarian.launchpad.net/7577682/CoreDump.gz
** Attachment added: Dependencies.txt
http://librarian.launchpad.net/7577683/Dependencies.txt
** Attachment added: Disassembly.txt
http://librarian.launchpad.net/7577684/Disassembly.txt
** Attachment
Hi,
I can also confirm this bug. The problem seems to be the package build
process: the provided patches in debian/patches are applied AFTER the
sources are built. The attached patch solves this problem for me.
** Attachment added: patch-sitecopy
I'm having the same problem
--
Gshutdown does not work properly
https://bugs.launchpad.net/bugs/228815
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Just uninstall and reinstall
Then it works
--
Gshutdown does not work properly
https://bugs.launchpad.net/bugs/228815
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Just uninstall and reinstall
Then it works
--
after hardy heron upgrade can no longer shutdown, logoff or reboot without
using ctrl+alt+backspace
https://bugs.launchpad.net/bugs/226966
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Just uninstall and reinstall
Then it works
--
sysinfo failed dbus connection
https://bugs.launchpad.net/bugs/84461
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
lsb_release -rd:
Description: Ubuntu 8.04.1
Release: 8.04
--
Basically it's the same thing going on as in #20994, but I can login
through the console.
I've got a network configuration, where the users are authenticated an
supported by a combination of LDAP, Samba and NFS
** Attachment added: ubuntu_hal.jpg
http://launchpadlibrarian.net/16474661/ubuntu_hal.jpg
--
Local login fails without LDAP server
https://bugs.launchpad.net/bugs/253937
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Same problem here with HP/Compaq nx9110. Same error message about bcm 4301,
although I am using bcm 4303. By blacklisting b43legacy and bcm43xx I can boot
normally, but of course have no wireless.
Thanks for fixing this, if you need any more info, please let me know.
--
Loading b43legacy
Looks like the controller was not working correctly, the new card is
recognised and the Harddisks are accessible.
I think this is solved.
--
Promise SATA300 TX2plus not working
https://bugs.launchpad.net/bugs/131303
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
Binary package hint: graphviz-cairo
using kubuntu gutsy with all updates on august 31.
installed graphviz, graphviz-cairo, graphviz-doc, libgraphviz3,
libgraphviz3-dev
on commandline dotedit gives:
[EMAIL PROTECTED]:/usr/lib/graphviz$ dotedit
Renderer type: gtk not
used the echo 128... variant which works
fine!)
So I hope, that I could help somebody as you guys helped me! Thanx a
lot!
with best regards
stefan
--
USB mass storage stops working after a while
https://bugs.launchpad.net/bugs/61235
You received this bug notification because you are a member
Public bug reported:
Controller is not recognized and attached drives aren't either.
** Affects: Ubuntu
Importance: Undecided
Status: New
--
Promise SATA300 TX2plus not working
https://bugs.launchpad.net/bugs/131303
You received this bug notification because you are a member of
I have no access to the Machine at the moment.
Is it correct, that in general the named controller should work with
Ubuntu 7.04?
--
Promise SATA300 TX2plus not working
https://bugs.launchpad.net/bugs/131303
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
*** This bug is a duplicate of bug 58617 ***
https://bugs.launchpad.net/bugs/58617
I can confirm the issue for Kubuntu 7.04. It would be nice for amarok
not to hang or libxine-extracodecs to be a suggested or recommended
package for amarok-xine.
--
mp3 support not installed
There are security vulnerabilities in old versions of the Flash Player:
http://www.adobe.com/support/security/bulletins/apsb09-01.html
Someone should fix this as soon as possible.
The updated Flash Player can be downloaded here:
Public bug reported:
Happens on:
Ubuntu jaunty (development branch)
9.04
I'm not sure if the automatically attached trace belongs to this bug.
But because it was the only problem i guess it is the graphic driver
issue.
ProblemType: Crash
Architecture: i386
DistroRelease:
** Attachment added: .var.log.jockey.log.txt
http://launchpadlibrarian.net/23221221/.var.log.jockey.log.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/23221222/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/23221959/Dependencies.txt
** Attachment added: ExtensionSummary.txt
http://launchpadlibrarian.net/23221960/ExtensionSummary.txt
** Attachment added: profiles.ini.txt
Public bug reported:
Happens on:
Ubuntu jaunty (development branch)
Release:9.04
When selecting a different screen saver than 'blank screen' the screen
saver preview is shown but afterwards no further action inside this
dialog is allowed (scroll bar, buttons, ... are not
if the panel's width is big enougth! I belive the
windows should be arragned vertical in this panelposition to allow the
use of the applet!
Using window-picker-applet 0.4.0 on Intrepid
Stefan
** Affects: window-picker-applet (Ubuntu)
Importance: Undecided
Status: New
--
window
this problem in several kubuntu forums, without
meaningfull success. What can I do to upgrade my System? Can I
circumvent this problem by using apt-get directly instead of using the
update-manager?
Thank you in advance
Stefan
Some further informations:
Current Kubuntu version:
(K)Ubuntu 8.04.2
** Affects
** Attachment added: logs.tar.gz
http://launchpadlibrarian.net/22909504/logs.tar.gz
--
Upgrade from 8.04 to 8.10 impossible
https://bugs.launchpad.net/bugs/332040
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I'm having a similar problem with multimedia keys not working. Kbd is a
USB wired frisby K5390 illuminated.
--
[intrepid] REGRESSION: multimedia keys no longer working
https://bugs.launchpad.net/bugs/281993
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Also having the same problem. I cannot install the package xorg-driver-
fglrx. Apparently some of the graphic cards were dropped when Catalyst
9.4 was released. Here is my output of lspci -vvnn
ste...@stefan-laptop:~$ lspci -vvnn
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host
It still does not work for hardy-backports:
Unpacking flashplugin-nonfree (from
.../flashplugin-nonfree_10.0.1.218+10.0.0.525ubuntu1~hardy1+really9.0.124.0ubuntu2_i386.deb)
...
Setting up flashplugin-nonfree
(10.0.1.218+10.0.0.525ubuntu1~hardy1+really9.0.124.0ubuntu2) ...
Downloading...
Where is the problem in fixing this bug?
Unpacking flashplugin-nonfree (from
.../flashplugin-nonfree_10.0.1.218+10.0.0.525ubuntu1~hardy1+really9.0.124.0ubuntu2_i386.deb)
...
Setting up flashplugin-nonfree
(10.0.1.218+10.0.0.525ubuntu1~hardy1+really9.0.124.0ubuntu2) ...
Downloading...
Recompiling the version from intrepid, vdr-plugin-xineliboutput_1.0.1-5.dsc,
makes it work on Hardy for me (resolving the problem with crashing on the first
keypress).
However I needed to use dpkg-buildpackage -uc -us -d to override the
dependencies on vdr-dev (= 1.6.0-5) and libxine-dev (=
** Also affects: totem
Importance: Undecided
Status: New
--
Movie fails to play after auto download and install of codecs etc
https://bugs.launchpad.net/bugs/317057
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
What does your script look like, and where did you put it? I tried to do
the same, but it did not work. I attach my script, which I put in
/etc/pm/sleep.d/50wacres. The output redirections in there tell me that
it does get run, and as root.
Cheers,
Stefan
** Attachment added: 50wacres
http
I just reinstalled everything (including Vista - without updates) and checked.
Doesn't happen anymore. At least not on Debian Lenny.
Appears to have been a bug in Grub (- or a bug in a windows update) non-
the-less...
No, ReadBoost is off.
Anyway, issue no longer of concern.
--
Vista crashes
I experience the exact same problem. I have a Thinkpad X61s 7666-34G
running Ubuntu 8.04.1
The configuration is
kernel:
Linux version 2.6.24-22-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu
4.2.3-2ubuntu7)) #1 SMP Mon Nov 24 18:32:42 UTC 2008 (Ubuntu
2.6.24-22.45-generic)
With wlan
I had the same problem with my creative xfi, but i solved it by changing the
default-sample-format value in daemon.conf.
The standard value was s16le and when i changed it to s24le the whistle
dissappeared.
--
after upgrade to karmic during audio playback a high-frequency whistling can be
Public bug reported:
Binary package hint: gdm
Following http://live.gnome.org/GDM/2.22/Configuration, I run as root on
Karmic the command
# gconftool-2 --type boolean --set /apps/gdm/simple-
greeter/disable_restart_buttons 1
which yields
# gconftool-2 -g
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/36616006/Dependencies.txt
** Attachment added: ProcEnviron.txt
http://launchpadlibrarian.net/36616007/ProcEnviron.txt
--
gdm does not honor disable_restart_buttons
https://bugs.launchpad.net/bugs/494366
You received this
Stange, strange,
after redo the changes in ALSA via the script everything worked fine for
me, except of the front-mic. Seems like something was wrong with the
ALSA-Installation after the update.
--
No sound in ekiga when used with Pulse Audio
https://bugs.launchpad.net/bugs/382234
You received
Public bug reported:
Binary package hint: ubuntuone-client
Ubunte ONe dosnt work
ProblemType: Bug
.home.w3b..cache.ubuntuone.log.oauth.login.log: Ubuntu-One Client Version 1.0.2
wird gestartet
.home.w3b..config.ubuntuone.ubuntuone.client.conf:
[ubuntuone]
show_applet = 1
connected = True
** Attachment added:
.home.w3b..cache.ubuntuone.log.syncdaemon.exceptions.log.txt
http://launchpadlibrarian.net/37224432/.home.w3b..cache.ubuntuone.log.syncdaemon.exceptions.log.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/37224433/Dependencies.txt
**
Public bug reported:
The information given under Systemüberwachung (system monitoring?) displays 2
processors (Intel CPU N270).
My computer does only have one of it!
I am using a MSI NetOn AP1900 (945GSE+ICH7M,
Intel® Atom Prozessor 1,6 GHz N270)
Does anyone have any idea on this subject?
hint what to do.
Stefan
--
pam_mount trying to unmount my auto-mounted encrypted partitions every hour via
CRON
https://bugs.launchpad.net/bugs/483159
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu
the system is running with 8.10 and i don't want to remove all the stuff
again.
Regards,
Stefan Hahne
Robbie Williamson schrieb:
Did you take the default partition setup? If you did the manual setup,
I think it will ask you where to install the bootloader and you have to
make sure you check the box
[ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Architecture: i386
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: stefan 2849 F pulseaudio
/dev/snd/seq:timidity 2713 F timidity
CRDA: Error: [Errno 2] No such file or directory
Card0
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/34564787/AlsaDevices.txt
** Attachment added: ArecordDevices.txt
http://launchpadlibrarian.net/34564788/ArecordDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/34564789/BootDmesg.txt
**
I upgraded to 9.10, and then after did a fresh install of 9.10, and
still no brightness control. I can adjust brightness during the boot
sequence, so its not faulty keys or anything.
--
Fn+Up/Down does not change screen brightness on Dell Latitude C640
https://bugs.launchpad.net/bugs/309973
You
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/34413149/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/34413150/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/34413152/ProcStatus.txt
** Attachment
Public bug reported:
Ubuntu 9.10
After installing PostgreSQL (latest Version), evolution does not start anymore.
(and i just recognized, that gedit has a similar problem with libmxl2)
Error message (evolution):
evolution: /opt/PostgreSQL/8.4/lib/libxml2.so.2: no version information
available
My Inspiron 4150 also has a Mobility Radeon 7500 card and has the same
issues.
--
(32MB) certain windows drawn garbled when XAA is used
https://bugs.launchpad.net/bugs/426582
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
For me there is no diffrence between running ekiaga with or without
pasuspender. CPU ussage goes up to 100 % an sound comes soemtimes
'cripled' and soemtimes not at all. didnt try to build the sources from
trunk yet. Maybe its possible to do a fix like in Fedora?
--
No sound in ekiga when used
Hi Carrillo,
thanks for your suggestion. but forwarding the port didnt change
anything. Also using the script to download and install the latest alsa
disdnt change anything, but disabling the sound in firefox.
--
No sound in ekiga when used with Pulse Audio
On my Inspiron 4150, I unintalled the Xorg Radeon drivers and loaded the
flrgx drivers last night. This had resulted in no luck at all in
Jaunty, but it works in Karmic.
Gains:
-I can increase/decrease brightness with appropriate dell keys!! No brightness
indicator pops up, but it works
-I can
Not related to the brightness control, but to add to my last comment,
the suspend wasn't fixed. It works more frequently I think, but 50/50
at best.
--
Fn+Up/Down does not change screen brightness on Dell Latitude C640
https://bugs.launchpad.net/bugs/309973
You received this bug notification
Public bug reported:
Binary package hint: ubuntuone-client
The local version of Ubutu One could not be synced with the online version.
The error reported that the local version might be a more recent version than
the online version.
ProblemType: Bug
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/34730445/Dependencies.txt
** Attachment added: UbuntuoneClientPackages.txt
http://launchpadlibrarian.net/34730447/UbuntuoneClientPackages.txt
** Attachment added: XsessionErrors.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/34762379/Dependencies.txt
** Attachment added: Disassembly.txt
http://launchpadlibrarian.net/34762380/Disassembly.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/34762384/ProcMaps.txt
** Attachment
Public bug reported:
Binary package hint: update-notifier
system is runing on a laptop. the problem appeared with disconected
charger
ProblemType: Crash
Architecture: i386
CrashCounter: 1
Date: Sat Oct 31 11:22:02 2009
DistroRelease: Ubuntu 9.10
ExecutablePath:
Public bug reported:
Binary package hint: warzone2100
Looks like this started happening with Karmic Koala, in which warzone2100 is
updated to version 2.2.2+dfsg1-1.
Also have frequent crashes of PulseAudio with Karmic, especially with this game
:(
ProblemType: Crash
Architecture: amd64
Date:
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/34800649/Dependencies.txt
** Attachment added: Disassembly.txt
http://launchpadlibrarian.net/34800650/Disassembly.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/34800651/ProcMaps.txt
** Attachment
Hi I have a asus 1101ha and disabled bluetooth as well. Cannot re-enable
it via gui or via /etc/init.d/bluetooth restart either
I have recently installed karmic koala (ubuntu)
--
[KARMIC]bluetooth can't be re-enabled after it has been manually disabled
https://bugs.launchpad.net/bugs/461061
You
I have the same problem with a Creative Soundblaster X-Fi Extreme Music
(PCI) under 64-Bit.
Under Ubuntu 9.04 Jaunty the X-Fi workes fine with the unstable driver
from twai. Also the surround sound wokres with the old version of
pulseaudio.
--
Karmic: PCM volume (as seen in alsamixer) stuck at
This seems similar to what is happening on my Inspiron 4150 notebook.
Suspend seems to work when I shut the lid, but on resume I end up with a
black screen with random vertical red stripes. In my case, I am running
a fresh installation of 9.10 from the 'alternate' install image, not an
upgrade,
@Daniel T Chen
I've installed this package and reboot, but the problem with pulseaudio still
exists.
The sound works also before (without the
linux-backports-modules-alsa-karmic-generic package), but its the problem that
pulseaudio forces the PCM volume to 100%.
--
Karmic: PCM volume (as seen
!
Any insight appreciated. Thanks
Stefan
--
Fn+Up/Down does not change screen brightness on Dell Latitude C640
https://bugs.launchpad.net/bugs/309973
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs
1 - 100 of 19403 matches
Mail list logo
