Public bug reported:
Im trying to user qla2xxx module with QLogic Corp. ISP2532-based 8Gb
Fibre Channel to PCI Express HBA (rev 02) on ubuntu 14.04 LTS and 16.04
LTS. Problem seems to be similar to
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1117428
but I already have newest kernel and it happens on two version of
ubuntu. I can just add that it works on CentOS/RHEL 7
/var/log/syslog snippet:
qla2xxx [0000:0b:00.0]-d009:3: Firmware has been previously dumped
(ffffc90000d81000) -- ignoring request.
qla2xxx [0000:0b:00.0]-101e:3: Mailbox cmd timeout occurred, cmd=0x69,
mb[0]=0x69. Scheduling ISP abort
qla2xxx [0000:0b:00.0]-00af:3: Performing ISP error recovery -
ha=ffff880035e00000.
qla2xxx [0000:0b:00.0]-500a:3: LOOP UP detected (8 Gbps).
qla2xxx [0000:0b:00.0]-803b:3: Firmware ready **** FAILED ****.
qla2xxx [0000:0b:00.0]-d009:3: Firmware has been previously dumped
(ffffc90000d81000) -- ignoring request.
qla2xxx [0000:0b:00.0]-101e:3: Mailbox cmd timeout occurred, cmd=0x69,
mb[0]=0x69. Scheduling ISP abort
qla2xxx [0000:0b:00.0]-00af:3: Performing ISP error recovery -
ha=ffff880035e00000.
qla2xxx [0000:0b:00.0]-500a:3: LOOP UP detected (8 Gbps).
# systool -c fc_host -v
Class = "fc_host"
Class Device = "host3"
Class Device path =
"/sys/devices/pci0000:00/0000:00:16.0/0000:0b:00.0/host3/fc_host/host3"
dev_loss_tmo = "30"
fabric_name = "0xffffffffffffffff"
issue_lip = <store method only>
max_npiv_vports = "254"
node_name = "0x20000024ff778622"
npiv_vports_inuse = "0"
port_id = "0x000000"
port_name = "0x21000024ff778622"
port_state = "Linkdown"
port_type = "Unknown"
speed = "unknown"
supported_classes = "Class 3"
supported_speeds = "1 Gbit, 2 Gbit, 4 Gbit, 8 Gbit"
symbolic_name = "QLE2562 FW:v8.03.00 DVR:v8.07.00.26-k"
system_hostname = ""
tgtid_bind_type = "wwpn (World Wide Port Name)"
uevent =
vport_create = <store method only>
vport_delete = <store method only>
Device = "host3"
Device path = "/sys/devices/pci0000:00/0000:00:16.0/0000:0b:00.0/host3"
fw_dump =
issue_logo = <store method only>
nvram = "ISP "
optrom_ctl = <store method only>
optrom =
reset = <store method only>
uevent = "DEVTYPE=scsi_host"
vpd = "▒("
(here it hangs for a while and reports some errors, already posted above)
lspci -v
0b:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI
Express HBA (rev 02)
Subsystem: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express
HBA
Physical Slot: 192
Flags: bus master, fast devsel, latency 64, IRQ 19
I/O ports at 5000 [size=256]
Memory at fd4fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 3
Capabilities: [4c] Express Endpoint, MSI 00
Capabilities: [88] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [98] Vital Product Data
Capabilities: [a0] MSI-X: Enable+ Count=2 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [138] Power Budgeting <?>
Kernel driver in use: qla2xxx
Kernel modules: qla2xxx
** Affects: linux-firmware (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1625157
Title:
QLogic qla2xxx firmware fails
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1625157/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
