[Bug 1709135] Re: add bond primary parameter

[Launchpad Bug Tracker]

This bug was fixed in the package nplan - 0.32~16.04.3

---
nplan (0.32~16.04.3) xenial; urgency=medium

  * tests/integration.py: Really fix skipping test_routes_v6 for the NM
backend.

nplan (0.32~16.04.2) xenial; urgency=medium

  * tests/integration.py: Fix test_routes_v6 that I clobbered when I re-applied
the skip rules for 16.04 after merging in 0.32.

nplan (0.32~16.04.1) xenial; urgency=medium

  * Backport netplan 0.32 to 16.04. (LP: #1713142)
  * debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
feature backported in that revision.
  * tests/integration.py: Skip tests that are still not yet supported in xenial

nplan (0.32) bionic; urgency=medium

  * src/nm.c: better handle the UUID generation; the order of iterating
through interaces may affect things here. Also make sure the tests catch
a null UUID.

nplan (0.31) bionic; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * src/nm.c: generate a UUID for a connection only as needed; when we're
dealing with NM VLANs. (LP: #1712921)
  * debian/tests/autostart: Make the autostart test more verbose and avoid
failing right from the start when systemd-networkd is disabled.
(LP: #1699371)
  * tests/integration.py: bump the NetworkManager timeout for settling to
120 seconds, autopkgtest infrastructure tends to be a little slow for the
network device configuration to be applied and noticed by NM.
(LP: #1699371)

  [ Dimitri John Ledkov ]
  * Reload udevd to invalidate configuration cache of .rules/.link files
as generate step may have changed them. LP: #1669564

  [ Dan Streetman ]
  * Add another interface driver exception to netplan replug to prevent unbind
of the Xen VIF interfaces. (LP: #1729573)

nplan (0.30) artful; urgency=medium

  * Add an "optional" syntax node for now to all devices. This is unimplemented
for now, but intended to allow users to mark some devices as optional: to
make sure they do not delay boot when configured. (LP: #1664844)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
exists. nplan is enabled by default, so it might well have the directory
already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
broke default network config in LXD and was contrary to the defaults used
by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
allow users to disable processing Router Advertisements when required by
their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

  * Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
  rebind. (LP: #1712224)
  * Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
  being around and enabled when we restart the service; but we don't need
  to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
  networkd autostarts or not, but we need to make sure that our generator
  will run at boot, so instead check the state, but only assert it once
  we've added a config file and before checking the state of our dummy
  device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
  as reliable as possible; by setting saner defaults.

nplan (0.25) artful; urgency=medium

  * tests/generate.py: add a test to validate that correct blacklist entries
are added when creating virtual devices.
  * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
the remaining interface and udev configuration can confuse NetworkManager
now that it seems to manage random devices it did not create again.
(LP: #1699371)
  * src/nm.c: set the MTU even though we also specify it in systemd-networkd
for consumption by udev. NetworkManager will try to set it and might
otherwise default to the wrong value.
  * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
same config, SLAAC), and don't have static addresses set. This should fix
the cases where unconfigured devices still get an IPv6 address.
(LP: #1655440)
  * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is 

[Bug 1709135] Re: add bond primary parameter

[Launchpad Bug Tracker]

This bug was fixed in the package nplan - 0.32~17.04.1

---
nplan (0.32~17.04.1) zesty; urgency=medium

  * Backport 0.32 to 17.04. (LP: #1713142)

nplan (0.32) bionic; urgency=medium

  * src/nm.c: better handle the UUID generation; the order of iterating
through interaces may affect things here. Also make sure the tests catch
a null UUID.

nplan (0.31) bionic; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * src/nm.c: generate a UUID for a connection only as needed; when we're
dealing with NM VLANs. (LP: #1712921)
  * debian/tests/autostart: Make the autostart test more verbose and avoid
failing right from the start when systemd-networkd is disabled.
(LP: #1699371)
  * tests/integration.py: bump the NetworkManager timeout for settling to
120 seconds, autopkgtest infrastructure tends to be a little slow for the
network device configuration to be applied and noticed by NM.
(LP: #1699371)

  [ Dimitri John Ledkov ]
  * Reload udevd to invalidate configuration cache of .rules/.link files
as generate step may have changed them. LP: #1669564

  [ Dan Streetman ]
  * Add another interface driver exception to netplan replug to prevent unbind
of the Xen VIF interfaces. (LP: #1729573)

nplan (0.30) artful; urgency=medium

  * Add an "optional" syntax node for now to all devices. This is unimplemented
for now, but intended to allow users to mark some devices as optional: to
make sure they do not delay boot when configured. (LP: #1664844)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
exists. nplan is enabled by default, so it might well have the directory
already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
broke default network config in LXD and was contrary to the defaults used
by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
allow users to disable processing Router Advertisements when required by
their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

  * Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
  rebind. (LP: #1712224)
  * Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
  being around and enabled when we restart the service; but we don't need
  to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
  networkd autostarts or not, but we need to make sure that our generator
  will run at boot, so instead check the state, but only assert it once
  we've added a config file and before checking the state of our dummy
  device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
  as reliable as possible; by setting saner defaults.

nplan (0.25) artful; urgency=medium

  * tests/generate.py: add a test to validate that correct blacklist entries
are added when creating virtual devices.
  * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
the remaining interface and udev configuration can confuse NetworkManager
now that it seems to manage random devices it did not create again.
(LP: #1699371)
  * src/nm.c: set the MTU even though we also specify it in systemd-networkd
for consumption by udev. NetworkManager will try to set it and might
otherwise default to the wrong value.
  * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
same config, SLAAC), and don't have static addresses set. This should fix
the cases where unconfigured devices still get an IPv6 address.
(LP: #1655440)
  * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
configured; this follows the same logic as setting IPv6AcceptRA=no in
networkd, with the exception that NM does not currently disable RAs. When
it does, an unconfigured device for IPv6 will truly be left with no config.

nplan (0.24) artful; urgency=medium

  * debian/control: set Priority to important to make sure we can get into
minimal.

 -- Mathieu Trudel-Lapierre   Thu, 16 Nov 2017
10:43:28 -0500

-- 
You received this bug notification because you are a 

[Bug 1709135] Re: add bond primary parameter

[Mathieu Trudel-Lapierre]

Verification-done zesty with 0.32~17.04.01:

Tested bond in balance-tlb mode and active-backup mode, both correctly
set the primary for the bond.

** Tags removed: verification-needed-zesty
** Tags added: verification-done-zesty

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Mathieu Trudel-Lapierre]

Verification-done xenial with 0.32~16.04.3:

Testing bonding in active-backup and balance-tlb mode; in both cases
when primary: is set, that device it correctly set to be used as the
primary slave, as shown in both /proc/net/bonding/bond0 and
/sys/class/net/bond0/bonding/primary.

** Tags removed: verification-needed verification-needed-xenial
** Tags added: verification-done-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Mathieu Trudel-Lapierre]

Verification-done-artful with 0.32~17.10.1:

Bonding in active-backup mode with primary: set to a suitable device
shows the bond with that device set as primary slave.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Łukasz Zemczak]

Hello Ryan, or anyone else affected,

Accepted nplan into xenial-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.3 in
a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-xenial to verification-done-xenial. If it does not
fix the bug for you, please add a comment stating that, and change the
tag to verification-failed-xenial. In either case, details of your
testing will help us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Tags removed: verification-failed-xenial
** Tags added: verification-needed-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Mathieu Trudel-Lapierre]

Autopktests still failing for xenial; the test is still not being
skipped (we know it won't work on Xenial due to the version of NM
shipped there). Marking verification-failed-xenial.

** Tags removed: verification-needed-xenial
** Tags added: verification-failed-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Brian Murray]

Hello Ryan, or anyone else affected,

Accepted nplan into xenial-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.2 in
a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-xenial to verification-done-xenial. If it does not
fix the bug for you, please add a comment stating that, and change the
tag to verification-failed-xenial. In either case, details of your
testing will help us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Tags removed: verification-failed-xenial
** Tags added: verification-needed-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Mathieu Trudel-Lapierre]

nplan 0.32~16.04.2 fails to build because I mismerged 0.32 and broke the
code skipping the test_routes_v6 test in the NetworkManager case.
Therefore, it can't possibly pass SRU verification.

** Tags removed: verification-needed-xenial
** Tags added: verification-failed-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Łukasz Zemczak]

Hello Ryan, or anyone else affected,

Accepted nplan into xenial-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.1 in
a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-xenial to verification-done-xenial. If it does not
fix the bug for you, please add a comment stating that, and change the
tag to verification-failed-xenial. In either case, details of your
testing will help us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Tags removed: verification-done-xenial
** Tags added: verification-needed-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Łukasz Zemczak]

Hello Ryan, or anyone else affected,

Accepted nplan into zesty-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/nplan/0.32~17.04.1 in
a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-zesty to verification-done-zesty. If it does not fix
the bug for you, please add a comment stating that, and change the tag
to verification-failed-zesty. In either case, details of your testing
will help us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Tags removed: verification-done verification-done-zesty
** Tags added: verification-needed verification-needed-zesty

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Launchpad Bug Tracker]

This bug was fixed in the package systemd - 232-21ubuntu7

---
systemd (232-21ubuntu7) zesty; urgency=medium

  * networkd: accept `:' in ifnames in systemd/networkd. (LP: #1714933)
  * networkd: add support for ActiveSlave and PrimarySlave netdev options.
(LP: #1709135)
  * Cherrypick upstream fix for a race between .mount and .automount units,
which currently may result in automounts hanging. (LP: #1709649)
  * systemd.postinst: Fix-up version number check in the previous sru.
The version check in the postinst was too tight, thus the SRU fix failed
validation. (LP: #1710410)

systemd (232-21ubuntu6) zesty; urgency=medium

  * link: Fix offload features initialization.
This fixes a regression introduced in v232 which caused TCP
segmentation offloads being disabled by default, resulting in
significant performance issues under certain conditions. (Closes: #864073)
(LP: #1703393)
  * loginctl: Fix loginctl ignoring user given session IDs at command-line
(LP: #1682154)
  * Disable fallback DNS servers.
This causes resolved to call-home to google, attempt to access network when
none is available, and spams logs. (LP: #1449001)
  * initramfs-tools: trigger udevadm add actions with subsystems first.
This updates the initramfs-tools init-top udev script to trigger udevadm
actions with type specified. This mimicks the
systemd-udev-trigger.service. Without type specified only devices are
triggered, but triggering subsystems may also be required and should happen
before triggering the devices. This is the case for example on s390x with 
zdev
generated udev rules. (LP: #1713536)
  * Enable systemd-resolved by default. (LP: #1710410)
  * core: fix systemd failing to serialize tasks correctly on daemon-reload.
(LP: #1702823)

 -- Dimitri John Ledkov   Wed, 04 Oct 2017 14:22:02
+0100

** Changed in: systemd (Ubuntu Zesty)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Tobias Wolf]

We got hit by this as well. Some Ceph nodes lost all networking.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Mathieu Trudel-Lapierre]

Sounds like maybe that kernel defaults to noarp and we'd want systemd to
retain previous behavior?

Do you have any sysctl configuration that forces arp state?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Markus Schade]

Actually there is. Before this update, bond interfaces (specifically
802.3ad) were defaulting to ARP enabled. After the upgrade, they are
created with NOARP set on the link.

pre-upgrade:

eth0:  
eth1: 
bond0:  

post-upgrade:
eth0:  
eth1: 
bond0:  

Linux cnode11 4.4.0-97-generic #120-Ubuntu SMP Tue Sep 19 17:28:18 UTC
2017 x86_64 x86_64 x86_64 GNU/Linux

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Markus Schade]

I opened LP #1727301 to track this further

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

@Markus Schade

Could you please elaborate what you mean? and/or open a new bug with a
tag "regression-updates" describing your system?

In systemd, the patch which was added is as following:
https://git.launchpad.net/~ubuntu-core-dev/+git/systemd/tree/debian/patches/networkd-add-support-to-configure-NOARP-ARP-for-interface.patch?h=ubuntu-xenial=b84ef89476003b10da06e9bb7d347f3b1e2098cf

Note that whilst Link.ARP setting is added to networkd, there is no
change in behavior. It is a tristate, without a default setting, meaning
kernel default is used.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Markus Schade]

this breaks existing configurations with bonding on upgrading from 
229-4ubuntu19 to 229-4ubuntu20
as bond interfaces are now by default configured without ARP. Hence you 
suddenly lose network connectivity on upgrade. Very bad for a SRU.

Plus adding "ARP=yes" to the Link section of a .network file does not
work.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Launchpad Bug Tracker]

This bug was fixed in the package systemd - 229-4ubuntu20

---
systemd (229-4ubuntu20) xenial; urgency=medium

  * resolved: recognize DNS names with more than one trailing dot as invalid
(LP: #160)
  * Ignore failures to set Nice priority on services in containers.
(LP: #1709536)
  * networkd: accept `:' in ifnames in systemd/networkd. (LP: #1714933)
  * initramfs-tools: trigger udevadm add actions with subsystems first.
(LP: #1713536)
  * networkd: Add support to set STP value on a bridge. (LP: #1665088)
  * networkd: add support for AgeingTImeSec, Priority and DefaultPVID settings.
(LP: #1715131)
- Drop cherrypick of uint16 config parser, superseeded by above commit.
  * networkd: add support to set ActiveSlave and PrimarySlave. (LP: #1709135)
- networkd: add support to configure ARP, depedency of Primary/ActiveSlave.

 -- Dimitri John Ledkov   Tue, 05 Sep 2017 14:01:51
+0100

** Changed in: systemd (Ubuntu Xenial)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

# dpkg-query -W systemd nplan
nplan   0.23~16.04.1
systemd 229-4ubuntu19

# netplan generate
Error in network definition //etc/netplan/bond-primary.yaml line 13 column 8: 
unknown key primary

Enabled proposed, retweaked netplan to have correct interface names

# dpkg-query -W systemd nplan
nplan   0.29~16.04.1
systemd 229-4ubuntu20

root@srux:~# netplan generate
root@srux:~# echo $?
0

My current netplan is
$ cat /etc/netplan/bond.yaml 
network:
  version: 2
  ethernets:
ens7:
  match:
name: ens7
ens8:
  match:
name: ens8
  bonds:
bond1:
  interfaces: [ ens7, ens8 ]
  parameters:
mode: active-backup
mii-monitor-interval: 100
primary: ens8
  dhcp4: true

Active slave is ens8. Changing netplan primary to ens7, and re-running
apply changes the active slave.

** Tags removed: verification-needed-xenial
** Tags added: verification-done-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

$ sudo netplan apply
Error in network definition //etc/netplan/bond.yaml line 13 column 8: unknown 
key primary

$ dpkg-query -W nplan systemd
nplan   0.23~17.04.1
systemd 232-21ubuntu5

$ sudo netplan apply
$ echo $?
0

$ dpkg-query -W systemd nplan
nplan   0.29~17.04.1
systemd 232-21ubuntu7

Bond is up, changing primary setting in netplan and executing apply,
changes the active_slave.

** Tags removed: verification-needed verification-needed-zesty
** Tags added: verification-done verification-done-zesty

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Brian Murray]

Hello Ryan, or anyone else affected,

Accepted nplan into xenial-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/nplan/0.29~16.04.1 in
a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-xenial to verification-done-xenial. If it does not
fix the bug for you, please add a comment stating that, and change the
tag to verification-failed-xenial. In either case, details of your
testing will help us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: nplan (Ubuntu Xenial)
   Status: Triaged => Fix Committed

** Tags removed: verification-done-xenial
** Tags added: verification-needed-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Brian Murray]

Hello Ryan, or anyone else affected,

Accepted nplan into zesty-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/nplan/0.29~17.04.1 in
a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-zesty to verification-done-zesty. If it does not fix
the bug for you, please add a comment stating that, and change the tag
to verification-failed-zesty. In either case, details of your testing
will help us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: nplan (Ubuntu Zesty)
   Status: Triaged => Fix Committed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Brian Murray]

Hello Ryan, or anyone else affected,

Accepted systemd into zesty-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/systemd/232-21ubuntu7
in a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-zesty to verification-done-zesty. If it does not fix
the bug for you, please add a comment stating that, and change the tag
to verification-failed-zesty. In either case, details of your testing
will help us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: systemd (Ubuntu Zesty)
   Status: In Progress => Fix Committed

** Tags removed: verification-done
** Tags added: verification-needed verification-needed-zesty

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

note that one cannot really use bond0 as it will be auto created and
networkd may loose the race to configure it. it is safer to use bond1
until a bugfix is SRUed to set max_bond to zero by default.

pre-tested with artful's netplan on zesty with a backrported systemd.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

Installed nplan 0.29 from artful to get it process the test-case yaml,
to then test networkd portion is working right.

Using:
# cat /etc/netplan/bond-primary.yaml
network:
  version: 2
  ethernets:
eth0:
  match:
name: eth0
dummy0:
  match:
driver: dummy
  bonds:
bond0:
  interfaces: [eth0, dummy0]
  parameters:
mode: active-backup
mii-monitor-interval: 100
primary: eth0
  dhcp4: true

229-4ubuntu19
Oct 02 15:37:21 test-upgrade systemd-networkd[1773]: 
[/run/systemd/network/10-netplan-eth0.network:8] Unknown lvalue 'PrimarySlave' 
in section 'Network'
Oct 02 15:37:21 test-upgrade systemd-networkd[1773]: bond0: IPv6 enabled for 
interface: Success


229-4ubuntu20
Oct 02 15:39:22 test-upgrade systemd[1]: Starting Network Service...
Oct 02 15:39:22 test-upgrade systemd-networkd[3821]: bond0: IPv6 enabled for 
interface: Success
Oct 02 15:39:22 test-upgrade systemd-networkd[3821]: bond0: netdev ready
Oct 02 15:39:22 test-upgrade systemd-networkd[3821]: eth0: Gained IPv6LL
Oct 02 15:39:22 test-upgrade systemd-networkd[3821]: Enumeration completed
Oct 02 15:39:22 test-upgrade systemd[1]: Started Network Service.

All is good.

** Tags removed: verification-needed verification-needed-xenial
** Tags added: verification-done verification-done-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

verification is done for the systemd portion of the bug.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

** Description changed:

  [Impact]
  Some complex bond configurations require setting a "primary" interface for 
the bond, or setting this greatly improves performance on the network bond.
  
  [Test case]
  See below for a configuration example.
  1) Apply configuration on a system with netplan.
  2) Run 'netplan apply'
  3) Validate that netplan apply does not return with an error
  4) Validate that netplan properly sets the "primary_slave" value on the bond. 
This can be verified by looking at /sys/class/net//bonding/primary_slave.
  5) Validate that there are no parsing errors from systemd-networkd in the 
journalctl
  
  [Regression potential]
  If existing configuration fails to be parsed, or lack of primary interface 
breaks configuration for existing bonds, this would be a regression caused by 
this update.
  
  ---
  
  ifenslave/eni support a bond parameter:  bond-primary which accepts an
  interface name that can be used to tell the kernel bonding driver which
  interface it should preferred in active-backup (and other modes).  This
  config option is missing in netplan.
  
   % cat bond-primary.yaml
- ethernets:
+ network:
    version: 2
    ethernets:
  eth0:
    match:
  driver: virtio
  ens4:
    match:
  driver: e1000
    bonds:
  bond0:
    parameters:
  mode: active-backup
  mii-monitor-interval: 100
  primary: e1000
    dhcp4: true
  
  % ./generate -r `pwd`/target
  Error in network definition 
/home/rharper/work/git/netplan/target//etc/netplan/bond-primary.yaml line 12 
column 8: unknown key primary

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Francis Ginther]

** Tags added: id-5988c348d036b6f6acb1e389

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Francis Ginther]

** Tags added: id-5988c3a877d5e440aecf0c3a

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Brian Murray]

Hello Ryan, or anyone else affected,

Accepted systemd into xenial-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/systemd/229-4ubuntu20
in a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-xenial to verification-done-xenial. If it does not
fix the bug for you, please add a comment stating that, and change the
tag to verification-failed-xenial. In either case, details of your
testing will help us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: systemd (Ubuntu Xenial)
   Status: Confirmed => Fix Committed

** Tags added: verification-needed verification-needed-xenial

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

** Description changed:

  [Impact]
  Some complex bond configurations require setting a "primary" interface for 
the bond, or setting this greatly improves performance on the network bond.
  
  [Test case]
  See below for a configuration example.
  1) Apply configuration on a system with netplan.
  2) Run 'netplan apply'
  3) Validate that netplan apply does not return with an error
  4) Validate that netplan properly sets the "primary_slave" value on the bond. 
This can be verified by looking at /sys/class/net//bonding/primary_slave.
+ 5) Validate that there are no parsing errors from systemd-networkd in the 
journalctl
  
  [Regression potential]
  If existing configuration fails to be parsed, or lack of primary interface 
breaks configuration for existing bonds, this would be a regression caused by 
this update.
  
  ---
  
  ifenslave/eni support a bond parameter:  bond-primary which accepts an
  interface name that can be used to tell the kernel bonding driver which
  interface it should preferred in active-backup (and other modes).  This
  config option is missing in netplan.
  
   % cat bond-primary.yaml
  ethernets:
    version: 2
    ethernets:
  eth0:
    match:
  driver: virtio
  ens4:
    match:
  driver: e1000
    bonds:
  bond0:
    parameters:
  mode: active-backup
  mii-monitor-interval: 100
  primary: e1000
    dhcp4: true
  
  % ./generate -r `pwd`/target
  Error in network definition 
/home/rharper/work/git/netplan/target//etc/netplan/bond-primary.yaml line 12 
column 8: unknown key primary

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Dimitri John Ledkov]

Staged for zesty at: https://git.launchpad.net/~ubuntu-core-
dev/+git/systemd/commit/?id=608838c764f1bce9ad0b506ec40bd15a7df3bcc8

** Changed in: systemd (Ubuntu Zesty)
   Status: Fix Released => Triaged

** Changed in: systemd (Ubuntu Xenial)
   Status: New => Confirmed

** Changed in: systemd (Ubuntu Zesty)
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Mathieu Trudel-Lapierre]

** Description changed:

+ [Impact]
+ Some complex bond configurations require setting a "primary" interface for 
the bond, or setting this greatly improves performance on the network bond.
+ 
+ [Test case]
+ See below for a configuration example.
+ 1) Apply configuration on a system with netplan.
+ 2) Run 'netplan apply'
+ 3) Validate that netplan apply does not return with an error
+ 4) Validate that netplan properly sets the "primary_slave" value on the bond. 
This can be verified by looking at /sys/class/net//bonding/primary_slave.
+ 
+ [Regression potential]
+ If existing configuration fails to be parsed, or lack of primary interface 
breaks configuration for existing bonds, this would be a regression caused by 
this update.
+ 
+ ---
+ 
  ifenslave/eni support a bond parameter:  bond-primary which accepts an
  interface name that can be used to tell the kernel bonding driver which
  interface it should preferred in active-backup (and other modes).  This
  config option is missing in netplan.
  
-  % cat bond-primary.yaml 
+  % cat bond-primary.yaml
  ethernets:
-   version: 2
-   ethernets:
- eth0:
-   match:
- driver: virtio
- ens4:
-   match:
- driver: e1000
-   bonds:
- bond0:
-   parameters:
- mode: active-backup
- mii-monitor-interval: 100
- primary: e1000
-   dhcp4: true
+   version: 2
+   ethernets:
+ eth0:
+   match:
+ driver: virtio
+ ens4:
+   match:
+ driver: e1000
+   bonds:
+ bond0:
+   parameters:
+ mode: active-backup
+ mii-monitor-interval: 100
+ primary: e1000
+   dhcp4: true
  
- % ./generate -r `pwd`/target 
+ % ./generate -r `pwd`/target
  Error in network definition 
/home/rharper/work/git/netplan/target//etc/netplan/bond-primary.yaml line 12 
column 8: unknown key primary

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Launchpad Bug Tracker]

This bug was fixed in the package nplan - 0.26

---
nplan (0.26) artful; urgency=medium

  * Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
  rebind. (LP: #1712224)
  * Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
  being around and enabled when we restart the service; but we don't need
  to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
  networkd autostarts or not, but we need to make sure that our generator
  will run at boot, so instead check the state, but only assert it once
  we've added a config file and before checking the state of our dummy
  device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
  as reliable as possible; by setting saner defaults.

 -- Mathieu Trudel-Lapierre   Wed, 23 Aug 2017
19:32:33 -0400

** Changed in: nplan (Ubuntu Artful)
   Status: Triaged => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Mathieu Trudel-Lapierre]

Sounds like we'd need to add a key under parameters: for the bond
device, as per the original description (but the device needs to be
listed in 'interfaces', and exist in the list of interfaces defined in
netplan:

ethernets:
  version: 2
  ethernets:
eth0:
  match:
driver: virtio
ens4:
  match:
driver: e1000
  bonds:
bond0:
  interfaces: [ eth0, ens4 ]
  parameters:
mode: active-backup
mii-monitor-interval: 100
primary: ens4
  dhcp4: true

This will require backporting the feature from systemd to the releases
where we need this (to xenial).

** Also affects: systemd (Ubuntu)
   Importance: Undecided
   Status: New

** Also affects: systemd (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Also affects: nplan (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Also affects: systemd (Ubuntu Artful)
   Importance: Undecided
   Status: New

** Also affects: nplan (Ubuntu Artful)
   Importance: High
 Assignee: Mathieu Trudel-Lapierre (cyphermox)
   Status: Triaged

** Also affects: systemd (Ubuntu Zesty)
   Importance: Undecided
   Status: New

** Also affects: nplan (Ubuntu Zesty)
   Importance: Undecided
   Status: New

** Changed in: systemd (Ubuntu Zesty)
   Status: New => Fix Released

** Changed in: systemd (Ubuntu Artful)
   Status: New => Fix Released

** Changed in: systemd (Ubuntu Xenial)
 Assignee: (unassigned) => Dimitri John Ledkov (xnox)

** Changed in: nplan (Ubuntu Xenial)
   Status: New => Triaged

** Changed in: nplan (Ubuntu Zesty)
   Status: New => Triaged

** Changed in: nplan (Ubuntu Zesty)
   Importance: Undecided => High

** Changed in: nplan (Ubuntu Xenial)
   Importance: Undecided => High

** Changed in: nplan (Ubuntu Zesty)
 Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox)

** Changed in: nplan (Ubuntu Xenial)
 Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Steve Langasek]

** Changed in: nplan (Ubuntu)
   Importance: Undecided => High

** Changed in: nplan (Ubuntu)
   Status: New => Triaged

** Changed in: nplan (Ubuntu)
Milestone: None => ubuntu-17.08

** Changed in: nplan (Ubuntu)
 Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1709135] Re: add bond primary parameter

[Ryan Harper]

This maps to networkd Bond config parameter: PrimarySlave=

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1709135

Title:
  add bond primary parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs