I'm seeing this issue as well. I have a Hardy host system, with bridged
network. I start a lucid 64 bit kvm with virtio and a tap device (which
is in a bridge already) and after a while, the network seems down (from
outside, no ssh access etc). However, when I run a ping from within the
kvm
Thanks for the patch :)
I've installed the patched version on two production nodes here. I will
have the results in a few days probably.
--
Memory leak
https://bugs.launchpad.net/bugs/588293
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed
I ran my test again overnight with the packages from -proposed and it's
not fixed the leak for me
--
memory leak
https://bugs.launchpad.net/bugs/591610
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in ubuntu.
--
I filed bug #591610 which may well be a dupe of this bug. I ran a test
overnight (as described in that bug) and I still see the same
significant leaking as before
--
Memory leak
https://bugs.launchpad.net/bugs/588293
You received this bug notification because you are a member of Ubuntu
Server
Public bug reported:
Binary package hint: qemu-kvm
qemu-kvm allow up to 8 nics per vm, this value is really too low for vm
attached to lots of network (I have a installation with 10 vlan right now but
this value will rise in near future)
I made a patch to up this value to 24, this should be
Chuck, any ideas on the timeline for the inclusion of the fix for this
bug? There has been a security upgrade since you made the fix available
in your ppa, so we're kinda stuck between a rock and a hard place...
Thanks!
--
[lucid] LOAD DATA INFILE fails in replication, simple patch available in
*** This bug is a duplicate of bug 589163 ***
https://bugs.launchpad.net/bugs/589163
** Branch linked: lp:ubuntu/lucid-proposed/linux-mvl-dove
--
kvm domain failing to start after kernel upgrade to 2.6.32-22
https://bugs.launchpad.net/bugs/589223
You received this bug notification because
Accepted chkrootkit into hardy-proposed, the package will build now and
be available in a few hours. Please test and give feedback here. See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed. Thank you in advance!
** Changed in: chkrootkit (Ubuntu
I will describe my problem:
What I want to do: share CUPS printers with Windows 64Bit Clients (Win XP/2003
and Win 7/2008). The clients should get the printer drivers from the CUPS
server. First target is to share the PDF printer.
Installation on Lucid. CUPS Version 1.4.3-1ubuntu1; Samba
Accepted apache2 into hardy-proposed, the package will build now and be
available in a few hours. Please test and give feedback here. See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed. Thank you in advance!
** Changed in: apache2 (Ubuntu Hardy)
Sorry, Dave had uploaded a fix for this to hardy-proposed some time ago
but I had neglected to process it. My fault. In compensation, I'll
waive the usual seven-day waiting period if you could test this quickly?
--
[SRU] If /usr/sbin/apache2 is set -x, upgrades fail
(I rejected your more or less identical upload, which came later.)
--
[SRU] If /usr/sbin/apache2 is set -x, upgrades fail
https://bugs.launchpad.net/bugs/583698
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to apache2 in ubuntu.
--
** Branch linked: lp:ubuntu/hardy-proposed/chkrootkit
--
[SRU] chkrootkit falsely flags files owned by Firefox 3 and Sun Java 6 valid
packages
https://bugs.launchpad.net/bugs/575945
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to
John, while this patch seems ok to me, this is really an upstream bug.
Can you submit a bug upstream (http://libvirt.org/bugs.html) and link to
it from this bug? Once upstream accepts it, we can cherrypick it for
Maverick, verify it and backport it to Lucid. Thanks!
--
apparmor driver blocks
Maverick has libvirt 0.8.1 now, so support for dynamically attaching of
scsi devices is deprecated.
--
dynamic block storage should use virtio
https://bugs.launchpad.net/bugs/588410
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to
** Changed in: libvirt (Ubuntu Maverick)
Status: Triaged = Incomplete
** Changed in: libvirt (Ubuntu Lucid)
Status: Triaged = Incomplete
--
apparmor driver blocks access to hostdev and pcidev devices
https://bugs.launchpad.net/bugs/545795
You received this bug notification because
Yeah, works for me, thanks!
tgl...@tglase:~ $ sudo env LC_ALL=C apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Starting
Starting 2
Done
Done
The following packages will be upgraded:
apache2 apache2-doc
I just went ahead and uploaded 4.2.4p8+dfsg-1ubuntu3 with this patch to
maverick, which should help with Chuck's SRU.
** Changed in: ntp (Ubuntu Maverick)
Status: Triaged = In Progress
** Changed in: ntp (Ubuntu Maverick)
Assignee: (unassigned) = Jamie Strandboge (jdstrand)
**
This bug was fixed in the package ntp - 1:4.2.4p8+dfsg-1ubuntu3
---
ntp (1:4.2.4p8+dfsg-1ubuntu3) maverick; urgency=low
* debian/apparmor-profile: allow access to /var/log/ntpstats/sysstats*
(LP: #574343)
-- Jamie Strandboge ja...@ubuntu.com Fri, 18 Jun 2010 07:54:24 -0500
Been up all night trying to figure this out. OP: Thanks for posting a
bug!
vmbuilder not accepting --ec2 options in lucid 10.04
--
vmbuilder doesn't recognize --ec2 flag
https://bugs.launchpad.net/bugs/576501
You received this bug notification because you are a member of Ubuntu
Server Team,
My verification has also proved successful, and updated the tag as
appropriate.
** Tags added: verification-done
** Tags removed: verification-needed
--
[SRU] If /usr/sbin/apache2 is set -x, upgrades fail
https://bugs.launchpad.net/bugs/583698
You received this bug notification because you are
I installed the latest version uploaded by soren, and the problem still
exists for me in a different way. I can use --firstboot and --firstlogin
and the script runs fine with those commands. The VM does not run those
commands, after it has been created and started. It starts up fine, it
starts the
We're closing this bug since it is has been some time with no response from the
original reporter. However, if the issue still exists please feel free to
reopen with the requested information. Also, if you could, please test against
the latest development version of Ubuntu, since this
Thanks for the patch, Alessandro.
Could you please send this upstream to the qemu-devel@ mailing list?
** Changed in: qemu-kvm (Ubuntu)
Importance: Undecided = Wishlist
** Changed in: qemu-kvm (Ubuntu)
Status: New = Incomplete
--
qemu-kvm max number of nics too low
Hrm, okay, thanks Chris.
Is this VM managed by libvirt? Is it possible the memory leak is in
libvirt, rather than kvm?
--
memory leak
https://bugs.launchpad.net/bugs/591610
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in
Dustin: yep, managed by libvirt.
I'm pretty sure the leak is kvm and not libvirt - the one remaining kvm process
this morning had a VIRT of ~7GB.
--
memory leak
https://bugs.launchpad.net/bugs/591610
You received this bug notification because you are a member of Ubuntu
Server Team, which is
On Fri, Jun 18, 2010 at 7:50 AM, Jamie Strandboge ja...@ubuntu.com wrote:
Maverick has libvirt 0.8.1 now, so support for dynamically attaching of
scsi devices is deprecated.
Right, as Jamie says, any distro that includes libvirt = 0.8.1 will
not work with scsi for hot attach. If upstream
Yes, I understand. I was replying to this part: As an added benefit,
performance should increase significantly. This is not necessarily
true, and in some cases, we have seen 10% performance degradation by
moving to virtio.
It will be a while until all distros move to libvirt 0.8.1. From an
I'll go through the whole thing from scratch, following instructions as I get
them from the GUI see where it gets me
I just walked into the other room sat down at an ol Pentium III pc that is
hooked to my printer. I added Mint9 [last week] to this PC, because it's
easier to use than 10.04
When you try to upgrade, do you have an error message like that :
Setting up mysql-server-5.1 (5.1.37-1ubuntu5.1) ...
* Stopping MySQL database server mysqld
...done.
* Starting MySQL database server mysqld
...fail!
invoke-rc.d: initscript mysql, action start failed.
dpkg: error processing
** Tags added: patch
--
dynamic block storage should use virtio
https://bugs.launchpad.net/bugs/588410
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to eucalyptus in ubuntu.
--
Ubuntu-server-bugs mailing list
FYI:
I can get `passwd` to work if I change the line in common-password
From:
password [success=1 default=ignore] pam_winbind.so use_authtok
try_first_pass
To:
password sufficient pam_winbind.so
I'm not sure if I'm creating other problems with the above edit, since
I'm
Public bug reported:
Binary package hint: ntp
I have an old Garmin GPS that I though I could use as a local time
source with NTP. It supports NMEA messages so I added the line to my
ntp.conf file:
server 127.127.20.0 # NMEA GPS
and created a symbolic link from /dev/gps0 -
This bug was fixed in the package libcommons-cli-java - 1.2-3
---
libcommons-cli-java (1.2-3) unstable; urgency=low
* Team upload.
* Merge changes from Ubuntu:
- debian/ant.properties: Build java2 compatible code.
* Remove Arnaud and Paul from Uploaders list.
* Switch to
Just to add, if I try gtkterm I can open and see the NMEA messages just
fine, so I don't know why it should report refclock_open /dev/gps0:
Permission denied in the first place.
--
ntpd sementation fault using NMEA driver
https://bugs.launchpad.net/bugs/596010
You received this bug notification
If I remove the symlink, it works but without the GPS (as one might
reasonably expect) and this is the corresponding syslog message:
Jun 18 17:59:02 pscpc ntpd[3075]: refclock_open /dev/gps0: No such file or
directory
Jun 18 17:59:02 pscpc ntpd[3075]: configuration of 127.127.20.0 failed
So it
On Fri, Jun 18, 2010 at 6:26 PM, Sinquin David
davidsinquin+launch...@gmail.com davidsinquin%2blaunch...@gmail.comwrote:
When you try to upgrade, do you have an error message like that :
Setting up mysql-server-5.1 (5.1.37-1ubuntu5.1) ...
* Stopping MySQL database server mysqld
Thank you for opening this bug and helping make Ubuntu better.
Your issue seems to be related to this apparmor message:
Jun 18 17:33:33 pscpc kernel: [18794.490995] type=1503
audit(1276878813.771:19): operation=open pid=2889 parent=1
profile=/usr/sbin/ntpd requested_mask=rw:: denied_mask=rw::
This bug was fixed in the package apache2 - 2.2.15-5ubuntu1
---
apache2 (2.2.15-5ubuntu1) maverick; urgency=low
* Merge from debian unstable. Remaining changes:
- debian/{control, rules}: Enable PIE hardening.
- debian/{control, rules, apache2.2-common.ufw.profile}: Add
This bug was fixed in the package apache2 - 2.2.15-5ubuntu1
---
apache2 (2.2.15-5ubuntu1) maverick; urgency=low
* Merge from debian unstable. Remaining changes:
- debian/{control, rules}: Enable PIE hardening.
- debian/{control, rules, apache2.2-common.ufw.profile}: Add
This bug was fixed in the package apache2 - 2.2.15-5ubuntu1
---
apache2 (2.2.15-5ubuntu1) maverick; urgency=low
* Merge from debian unstable. Remaining changes:
- debian/{control, rules}: Enable PIE hardening.
- debian/{control, rules, apache2.2-common.ufw.profile}: Add
I am attaching a tarball with a stand-alone Java program that exercises
BouncyCastle in the same exact way as Walrus does for image decryption.
Included with the code are a couple of the JARs it needs and three input
files: an encrypted compressed image (originally a ~1-GB Ubuntu image),
the
Public bug reported:
Binary package hint: apache2
apache2 (2.2.15-5) unstable; urgency=low
* Conflict with apache package as we now include apachectl. Closes: #579065
* Remove conflicts with old apache 2.0 modules. The conflicts are not
necessary anymore as skipping a stable release is
** Patch added: merge.debdiff
http://launchpadlibrarian.net/50554428/merge.debdiff
** Changed in: apache2 (Ubuntu)
Importance: Undecided = Wishlist
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2010-0408
** CVE added: http://www.cve.mitre.org/cgi-
Marking as 'Fix released', since this has been fixed.
** Changed in: apache2 (Ubuntu)
Status: New = Fix Released
** Patch removed: merge.debdiff
http://launchpadlibrarian.net/50554428/merge.debdiff
--
Please merge apache2 2.2.15-5 (main) from debian unstable (main)
Public bug reported:
Binary package hint: squid
I installed squidguard.
After sometime the folder /var/tmp is getting filled a lot of cache
files.
On every restart of squid, that folder should be cleared.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: squidguard 1.2.0-8.4ubuntu1
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/50555494/Dependencies.txt
--
/var/tmp is not cleared after squid restart
https://bugs.launchpad.net/bugs/596041
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to squid
Public bug reported:
Binary package hint: samba
1. Release of Ubuntu is 10.04 LTS
2. Version of Samba is - 3.4.7
Problem - Expected nmbd service to start at boot but it failed to start
at boot. We have multiple systems but this problem has been noticed only
on certain systems. The same
No manual changes were made to samba configuration file. Here it goes.
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba
Ok then. Someone in the comments mentioned that there is a fix which is
included in Ubuntu 10.04 and also available via PPA for ubuntu 9.10. Whatever
made you write this, Gijs Molenaar , it is not fixed. It's still not fixed
within samba if you look at the status of the bug over there at samba
This bug was fixed in the package apache2 - 2.2.8-1ubuntu0.17
---
apache2 (2.2.8-1ubuntu0.17) hardy-proposed; urgency=low
* debian/apache2.2-common.postinst: When dpkg-statoverride is used, the cut
delimiter has now been set to use ' ', as it was causing upgrades to fail.
More simple resolution than expected:
$ sudo ln -sf /usr/share/java/groovy-all.jar /usr/share/eucalyptus/groovy.jar
Will be fixed in my next upload. Marking triaged.
** Changed in: eucalyptus (Ubuntu Maverick)
Status: New = Triaged
** Changed in: eucalyptus
Status: New = Invalid
Marking invalid for Eucalyptus upstream, as it's a resolution based in
the packaging.
--
Eucalyptus doesn't start with latest stable version of Groovy
https://bugs.launchpad.net/bugs/595421
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to
works:
Linux beagle 2.6.32-020632-generic #020632 SMP Thu Dec 3 10:09:58 UTC 2009
x86_64 GNU/Linux
Linux beagle 2.6.32-0206321505-generic #0206321505 SMP Wed Jun 2 19:09:40 UTC
2010 x86_64 GNU/Linux
bad:
Linux beagle 2.6.33-020633-generic #020633 SMP Thu Feb 25 10:10:03 UTC
2010 x86_64
Hmm I tried 2.6.33 again just to be certain and now it is working on
2.6.33, hmm :-\
--
pad block corrupted error when trying to register an image with 2.6.34 kernel
https://bugs.launchpad.net/bugs/588861
You received this bug notification because you are a member of Ubuntu
Server Team, which is
I now can't get it to crash anymore. I am upgrading from maverick alpha
1 to current and then will do further testing.
--
pad block corrupted error when trying to register an image with 2.6.34 kernel
https://bugs.launchpad.net/bugs/588861
You received this bug notification because you are a
I tried upgrading to current and now I can't see my nc anymore. :-\
--
pad block corrupted error when trying to register an image with 2.6.34 kernel
https://bugs.launchpad.net/bugs/588861
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to
57 matches
Mail list logo