1) it was working by pure luck; it was never suposed to work
2) actually, there is; look at comment #6
3) for a reason - security
4) ??
It's not ignoring the issue. It's just that you are using 'mailbox'
path, which starts with 'maildir:' as a home variable. That's just
wrong, weather dovecot
Right, we are missing two pieces of information:
Someone familiar with the MIT SPNEGO code needs to look at the patch
and confirm it actually ignores MIC tokens only when MIC tokens are
optional. In particular, we want to confirm that if the mechanism
supports integrity and a MIC token would be
this is once again an issue due to the upgrade to Bacula 5.
it helps just to install gawk
--
Backup of Bacula's MySQL catalog fails
https://bugs.launchpad.net/bugs/207527
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to bacula in ubuntu.
I had the same problem. Editing /etc/nsswitch.conf as suggested above
fixed the problem when login in through GDM. Thanks!
--
gdm does not obey NIS settings for user groups
https://bugs.launchpad.net/bugs/553142
You received this bug notification because you are a member of Ubuntu
Server Team,
The first existing cloud was using the simple topology: one front-end,
one node controller. The cloud we installed first was made up of 3
machines: 1 CLC+Walrus, 1 CC+SC, 2 NC.
After installing the second cloud, both clouds had two clusters
registered against it. However, the output of
There is nothing about apparmor in either kern.log or message.log, but I
found the following in the qemu log directory:
~~| DirectFB 1.2.7 |~~
(c) 2001-2008 The world wide DirectFB Open Source Community
(c) 2000-2004 Convergence
** Also affects: libvirt
Importance: Undecided
Status: New
--
map serial port throws chardev: opening backend tty failed
https://bugs.launchpad.net/bugs/578527
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in ubuntu.
** Bug watch added: Red Hat Bugzilla #593577
https://bugzilla.redhat.com/show_bug.cgi?id=593577
** Changed in: libvirt
Importance: Undecided = Unknown
** Changed in: libvirt
Status: New = Unknown
** Changed in: libvirt
Remote watch: None = Red Hat Bugzilla #593577
--
map serial
Can anyone else confirm that #20 does not work for them? That is, if
you do the following:
* remove AddressFamily inet from sshd_config
* add -4 after exec /usr/sbin/sshd in /etc/init/ssh/conf
* run
initctl reload-configuration
restart sshd
then do you still have this problem? Does
pgrep
I have also now disabled apparmor and re-tested an install ,but exactly
the same error message appears, from the command line and using virt-
manager. I have tried this as a normal user and as root.
The file it is complaining about is /usr/bin/qemu-kvm ,which is a shell
script with contains the
Thanks,
I still have an error message if I change the kvm to kvm-balloon in
/etc/libvirt/qemu/Duffman.xml :
r...@homer:~# virsh start Duffman
error: Failed to start domain Duffman
error: internal error cannot parse QEMU version number in ''
However both are executables, and both displays the
Public bug reported:
Binary package hint: bacula
using packages from ubuntu release 10.4
package
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: bacula-director-pgsql 5.0.1-1ubuntu1
ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-22-generic
** Attachment added: AptOrdering.txt
http://launchpadlibrarian.net/48707201/AptOrdering.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/48707202/Dependencies.txt
** Attachment added: Df.txt
http://launchpadlibrarian.net/48707203/Df.txt
** Attachment added:
I believe the attached debdiff corrects the typo. Subscribing main
sponsors.
** Patch added: Fix typo
http://launchpadlibrarian.net/48708293/vsftpd_2.2.2-3ubuntu7.debdiff
--
mistake in upstart-script
https://bugs.launchpad.net/bugs/582539
You received this bug notification because you are a
** Project changed: upstart = null
** Changed in: null
Status: New = Invalid
** Also affects: samba (Ubuntu)
Importance: Undecided
Status: New
--
Samba (nmbd) fails to start at boot
https://bugs.launchpad.net/bugs/582376
You received this bug notification because you are a
Same strange bug here (Lucid, 2.6.32-22 | 2.6.32.13, libvirt-bin 0.7.5,
lxc | Xen, amd64, Intel i7) but unfortunately the trick doesn't work for
me, i.e. disabling and enabling ip forwarding. As soon as ip forwarding
is enabled, packets are dropped again arbitrarily.
Absolutely no supportive
Scott, why do you think this is not a bug? The daemon fails to start at
boot time and samba shares are not available. The nmbd daemon should
start when network is up
--
Samba (nmbd) fails to start at boot
https://bugs.launchpad.net/bugs/582376
You received this bug notification because you are a
This is trivially reproducible without the need for configuration files.
We should not be wasting bug reporters' time asking them for unnecessary
information ...
This is a long-standing problem, but I would rather not give the
unprivileged network monitor direct access to syslog. Instead, any
** Changed in: openldap (Ubuntu)
Importance: Undecided = High
** Changed in: openldap (Ubuntu)
Status: New = Incomplete
--
slapd sometimes doesn't start in lucid; can't log in if using nss_ldap
https://bugs.launchpad.net/bugs/582627
You received this bug notification because you are a
*** This bug is a duplicate of bug 512096 ***
https://bugs.launchpad.net/bugs/512096
** This bug has been marked a duplicate of bug 512096
[MASTER] Exec format error : package failed to install/remove :
installation/removal script returned error exit status 2
--
package postfix 2.7.0-1
Public bug reported:
Binary package hint: samba
After upgrading to release 10.04, I can't get samba to work at all.
All the computers on my network can ping each other, but none of them
can see each other in their workgroup.
samba:
Installed: 2:3.4.7~dfsg-1ubuntu3
Candidate:
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/48706182/Dependencies.txt
** Attachment added: SambaInstalledVersions.txt
http://launchpadlibrarian.net/48706183/SambaInstalledVersions.txt
--
samba doesn't work
https://bugs.launchpad.net/bugs/582803
You received this
Removing bacula-director-pgsql ...
dbconfig-common: dumping pgsql database bacula to
/var/tmp/bacula-director-pgsql.bacula.2010-05-18-17.54.pgsql.Xtx4Aw.
unable to connect to postgresql server.
error encountered dumping database:
psql: could not connect to server: No such file or directory Is the
Public bug reported:
sudo ldapsearch -y /etc/ldap.secrets -D mybinddn -b search base -xH
ldap://localhost;
does not work, as I get this error:
ldap_bind: Invalid credentials (49)
yet, if I run:
sudo ldapsearch -w $(sudo cat /etc/ldap.secrets) -D mybinddn -b
search base -xH ldap://localhost;
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/48712912/Dependencies.txt
--
ldapsearch -y option does not work
https://bugs.launchpad.net/bugs/582812
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to openldap in
Raffaele: this is not an upstart project issue, that's why Scott marked
it as Invalid. That would rather be a bug in the samba upstart script
(samba package), if any.
The nmbd upstart script has start on (local-filesystems and net-device-
up IFACE!=lo) so it should be started when another
Could you check the status of the samba daemons:
$ sudo status nmbd
$ sudo status smbd
Please describe your scenario in more detail (samba is not working is
not enough, given how many different uses of samba are possible). Are
you sharing folders on workstations ? Setting up a samba file server ?
** Summary changed:
- nmbd doesn't start
+ nmbd doesn't start because of missing testparm
--
nmbd doesn't start because of missing testparm
https://bugs.launchpad.net/bugs/572410
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in
I've done a bit of an experiment and this is what I've found:
Running valgrind on libvirtd -v ($ sudo valgrind -v --leak-check=full
--show-reachable=yes /usr/sbin/libvirtd -v) produced the output in
lp571093-libvirt-val-run1
A quick summary:
==15520== 78,696 (18,048 direct, 60,648 indirect)
On Wed, May 19, 2010 at 08:47:28AM -, nick wrote:
the kvm command is a symlink to qemu-system-x86_64 - even though this
system is an i386 ?
Are you trying to run an x86_64 guest on a i386 host?
--
Mathias Gug
Ubuntu Developer http://www.ubuntu.com
--
libvirt executing
no, this is going to be an i386 VM on an i386 host
--
libvirt executing /usr/bin/qemu-kvm fails with Permission denied
https://bugs.launchpad.net/bugs/575162
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in ubuntu.
--
Soren == Soren Hansen so...@ubuntu.com writes:
Soren Fixed in upstream 0.12.4.
Soren ** Changed in: vmbuilder
SorenStatus: Fix Committed = Fix Released
Soren --
Soren --firstboot option broken in 0.12.2-0ubuntu3
Soren https://bugs.launchpad.net/bugs/536942
Soren You received this bug
Public bug reported:
cemza...@ubuntu:~$ sudo apt-get install bacula
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libnet-daemon-perl libdbi-perl
** Attachment added: AptOrdering.txt
http://launchpadlibrarian.net/48714263/AptOrdering.txt
** Attachment added: Df.txt
http://launchpadlibrarian.net/48714264/Df.txt
** Attachment added: Dmesg.txt
http://launchpadlibrarian.net/48714265/Dmesg.txt
** Attachment added: DpkgTerminalLog.gz
I modified /usr/share/eucalyptus/gen_kvm_libvirt_xml as follows,
95c95
cmdlineroot=/dev/sda1 console=ttyS0/cmdline
---
cmdlineroot=/dev/vda1 console=ttyS0/cmdline
105c105
target dev='sda'/
---
target dev='vda' bus='virtio'/
110c110
model
Thx thierry
I can confirm this, although everything seems ok. Where is the upstart script
located?
--
Samba (nmbd) fails to start at boot
https://bugs.launchpad.net/bugs/582376
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in
** Changed in: qemu-kvm (Ubuntu)
Importance: Undecided = Low
--
[lucid] Stuttering/skipping mouse with Lucid guest
https://bugs.launchpad.net/bugs/560377
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in ubuntu.
--
** Changed in: qemu-kvm (Ubuntu)
Importance: Undecided = Wishlist
--
Can't run uncompressed (vmlinux) kernels
https://bugs.launchpad.net/bugs/534324
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in ubuntu.
--
** Changed in: qemu-kvm (Ubuntu)
Importance: Undecided = Medium
--
KVM 9.10 crashes for suse-10 as guest
https://bugs.launchpad.net/bugs/563582
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in ubuntu.
--
Ubuntu-server-bugs
Public bug reported:
I was using the update manage to do the upgrade from Karmic to Lucid,
and the script was unable to upgrade my snmp install, as noted in the
attachment. No further errors displayed, except failed to upgrade
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: snmpd
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/48728988/Dependencies.txt
** Attachment added: VarLogDistupgradeAptlog.gz
http://launchpadlibrarian.net/48728989/VarLogDistupgradeAptlog.gz
** Attachment added: VarLogDistupgradeApttermlog.gz
My strace revealed that sshd was indeed attempting to open this socket
and failing. I can see where if a user can inject into sshd that
injecting into rsyslog would be trial for this person.
I don't fully understand the ramifications of extra code lying around to do
things like:
1. Test for the
** Changed in: libvirt (Ubuntu)
Importance: Undecided = Wishlist
--
libvirtd will not run on virtual machine
https://bugs.launchpad.net/bugs/556326
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in ubuntu.
--
** Changed in: libvirt (Ubuntu)
Importance: Undecided = Low
--
/etc/init.d/libvirt-bin does not check that libvirtd has terminated on stop
https://bugs.launchpad.net/bugs/522688
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt
** Changed in: libvirt (Ubuntu)
Importance: Undecided = Low
--
map serial port throws chardev: opening backend tty failed
https://bugs.launchpad.net/bugs/578527
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in ubuntu.
--
** Changed in: libvirt (Ubuntu)
Importance: Undecided = Wishlist
--
dnsmasq runs unconfined due to starting before apparmor on boot
https://bugs.launchpad.net/bugs/573315
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in
** Changed in: libvirt (Ubuntu)
Importance: Undecided = Medium
--
libvirt-bin on latest lucid: heavy packet loss
https://bugs.launchpad.net/bugs/571408
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in ubuntu.
--
Accepted into lucid-proposed, the package will build now and be
available in a few hours. Please test and give feedback here. See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed. Thank you in advance!
** Changed in: openssh (Ubuntu Lucid)
Accepted into hardy-proposed, the package will build now and be
available in a few hours. Please test and give feedback here. See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed. Thank you in advance!
** Changed in: apache2 (Ubuntu Hardy)
Hello,
I just updated from jaunty to karmic and then to lucid.
After that, I had the same problem and I could not boot my images any more.
Maybe apparmor was installed automatically and caused the problem when starting
a guest:
error: Failed to start domain 220_trxerdpd330_installtest
error:
Public bug reported:
Binary package hint: samba
This doesn't affect me directly but I maintain OpenOffice.org for
Ubuntu.
It appears after getting numerous reports that OOo does not save
properly to cifs mounted filesystems that the cause is due to the fact
the 'nobrl' option is not being used.
** Attachment added: CifsVersion.txt
http://launchpadlibrarian.net/48733924/CifsVersion.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/48733925/Dependencies.txt
** Attachment added: SambaInstalledVersions.txt
I found that we do have a way to disable locking entirely for cifs in
OOo that we can use if this bug isn't considered good or safe to fix by
enabling nobrl.
--
OOo needs mount.cifs to default to nobrl if possible
https://bugs.launchpad.net/bugs/582925
You received this bug notification because
from zenmapCore.UmitLogging import log
File /usr/lib/python2.6/dist-packages/zenmapCore/UmitLogging.py, line 25,
in module
from zenmapCore.UmitOptionParser import option_parser
File /usr/lib/python2.6/dist-packages/zenmapCore/UmitOptionParser.py, line
26, in module
import
This is my network configuration:
auto br0
iface br0 inet dhcp
bridge_ports eth0
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off
pre-up ifconfig eth0 hw ether 00:00:00:00:00:01
The macaddress change is the workaround I'm using right now
Public bug reported:
Binary package hint: apache2
When you configure apache to use a password-protected SSL key, you are
prompted to provide that password when apache starts. The PID file has
not been written at this point, so the init script won't work properly
until the password is provided or
Public bug reported:
I installed the update (5.1.41-3ubuntu12.1) today. dpkg crashed. I reran
dpkg-reconfigure mysql-server to fix the broken package, but the daemon
will not start.
status mysql reports mysql start/post-start, (post-start) process 1194
but there is nothing in /var/run/mysqld.
I
** Attachment added: .etc.apparmor.d.usr.sbin.mysqld.txt
http://launchpadlibrarian.net/48737077/.etc.apparmor.d.usr.sbin.mysqld.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/48737078/Dependencies.txt
** Attachment added: Logs.var.log.daemon.log.txt
The workaround for OOo required updating coreutils to detect cifs which
I have added a patch for in bug 582980.
--
OOo needs mount.cifs to default to nobrl if possible
https://bugs.launchpad.net/bugs/582925
You received this bug notification because you are a member of Ubuntu
Server Team, which
I've found the cause of the problem. It was due to mysql not having
permissions to the appropriate directories in AppArmor. Changing them
fixed it.
Question: why did MySQL run before the update without the permissions?!?
(Another bug report, I think.)
** Changed in: mysql-dfsg-5.1 (Ubuntu)
I've been testing more, now with current lucid images, which have newer
cloud-init.
'ngrep port 8773' on the CLC shows:
T 10.55.55.8:39968 - 10.55.55.2:8773 [AP]
GET /2009-04-04/meta-data/instance-id HTTP/1.1..Accept-Encoding: identity..
Host: 169.254.169.254..Connection:
Hmm, I think upstream does prioritize pa over alsa. Marking incomplete,
need to check that.
** Changed in: qemu
Status: New = Incomplete
--
kvm: use PulseAudio instead of ALSA
https://bugs.launchpad.net/bugs/393430
You received this bug notification because you are a member of Ubuntu
Gerald == Gerald Carter je...@plainjoe.org writes:
Gerald I think Sam is wanting to know if likewise has submitted the
Gerald patch to upstream MIT krb5. If that is the case, I'll check
Gerald on the state of things and update the bug report.
That is. Early on you mentioned you
KVM on lucid appears to prioritize pa:
#kvm -audio-help | grep ^Name
Name: pa
Name: alsa
Name: sdl
Name: oss
Name: none
Name: wav
but in effect alsa is still used... could it be related to the fact that
by default pulse-audio daemon is started per user, whereas kvm starts
the virtual machines
Public bug reported:
Binary package hint: bacula
10.4 lucid lynx
i386
i just can't install
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: bacula-director-mysql (not installed)
ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-22-generic i686
** Attachment added: AptOrdering.txt
http://launchpadlibrarian.net/48768403/AptOrdering.txt
** Attachment added: Df.txt
http://launchpadlibrarian.net/48768404/Df.txt
** Attachment added: Dmesg.txt
http://launchpadlibrarian.net/48768405/Dmesg.txt
** Attachment added: DpkgTerminalLog.gz
Can you please describe in details how to fix it?
I'm not sure when fix will be in updates and need mysql to be running now.
--
mysql-server won't start after update
https://bugs.launchpad.net/bugs/582970
You received this bug notification because you are a member of Ubuntu
Server Team, which is
I noticed that above, 10.55.55.8 is the address of the node controller.
In cases where the correct response is found, that token is the public
IP address of the node. That would explain why the search for a
matching VM's IP would fail.
--
UEC guests sometimes fail on consuming user data
I've got a similar thing on lucid. I think the problem is somewhere related to
atk0110-acpi-0
other devices seem to work fine
sensors:
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.07 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.30 V (min = +2.97 V, max = +3.63 V)
Patch to gracefully ignore Qcow-formatted images.
** Patch added: Patch to gracefully ignore Qcow-formatted images.
http://launchpadlibrarian.net/48774774/partition2disk_qcow.patch
--
NTFS partitions aren't properly detected in partition2disk
https://bugs.launchpad.net/bugs/494803
You
** Summary changed:
- NTFS partitions aren't properly detected in partition2disk
+ RAW images and NTFS aren't properly detected in partition2disk
** Summary changed:
- RAW images and NTFS aren't properly detected in partition2disk
+ Non-RAW images and NTFS aren't properly detected in
Thierry,
Sorry for the incomplete information - I'm new to this bug reporting
business.
Since submitting the fault report, I found that it wasn't a problem with
samba after all.
I have a desktop computer running Ubuntu that has some printers
connected and 4 laptop computers, 2 of which run
I think Dietmar's comment #5 is pretty interesting: the binaries in 9.10
did *NOT* have the suid-bit set, but it definitely worked for me back
then (and for others too, as they reported). So there must have been a
way to make this work. Have there been any of the mechanisms mentioned
by Wladimir
On 19/05/10 21:34 Serobur wrote:
Can you please describe in details how to fix it?
I'm not sure when fix will be in updates and need mysql to be running now.
If MySQL won't start because of permissions problems (try running
sudo -u mysql mysqld
or check /var/log/messages and
After upgrading to lucid my dovecot does not work anymore, too.
When I try to start it I get the following message:
* Restarting IMAP/POP3 mail server dovecot
Error: Error in configuration file /etc/dovecot/dovecot.conf line 691: Unknown
setting: sieve
Ok, found a fix, in file Makefile.am, do_abi_check (near the end):
This code doesn't work:
for file in $(abi_headers); do \
@CC@ -E -nostdinc -dI \
-I$(top_srcdir)/include \
-I$(top_srcdir)/include/mysql \
No, wasn't that after all.
Reverted it and it worked, it was the first line:
set -ex; \
removed the \ and it worked. Again no idea why that would break the
script. But I retried that about a dozen times, and I'm positive that
this was the line that made it break in the first place.
--
mysql
Update:
If I use the ssh binary from package openssh-client_5.1p1-6ubuntu2_amd64.deb
9.10 (Karmic) on my 10.04 system as the Session 2 caller to the remote ssh2
server, then session 1 shows the ports closing down correctly confirming the
channel is dead, like they would on a native 9.10 system.
Problem still present in todays proposed release
ii openssh-client1:5.3p1-3ubuntu4
secure shell (SSH) client, for secure access
ii openssh-server1:5.3p1-3ubuntu4
secure shell (SSH)
I am running 2.7.STABLE7-1ubuntu12. Yeah, hadn't realized I had that
3.0RC1 config file (I have another proxy running on a gentoo box, which
probably has 3.0). I will try just dropping in the stock ubuntu
squid.conf to make sure it's not some oddity of my config file
preventing it from
Ok thanks for testing,
Can you test the version at https://edge.launchpad.net/~zulcss/+archive
/server-lucid-bug-fixes.
Thanks
chuck
--
munin-node after update to Lucid still in /etc/rc*.d, invoked twice
https://bugs.launchpad.net/bugs/574704
You received this bug notification because you are
** Changed in: tomcat6 (Ubuntu)
Status: Invalid = New
--
tomcat6 directory structure broken
https://bugs.launchpad.net/bugs/577683
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to tomcat6 in ubuntu.
--
Ubuntu-server-bugs mailing
82 matches
Mail list logo