Hi,
I am using analog out with audiophonics dac. This is my config
> Start <
#
# Edit the variables below to setup a wifi based system without LAN
access
# Change Wifi to "on". Valid options for Encryption are "WEP", "WPA" or
"OPEN"
feeder6 wrote:
> @tcutting
>
> There is no change when i increase the volume. The vu still does not
> move.
Hi, How are you listening to your music, analog, HDMI, USB, I2s-DAC and
what is your output setting ?
Please provide a copy of your config.cfg (first select advanced tab on
the "main" pa
@tcutting
There is no change when i increase the volume. The vu still does not
move.
feeder6's Profile: http://forums.slimdevices.com/member.php?userid=65101
View this thread: http://forums.slimdevices.com/showthread.php?t
praganj wrote:
> I am playing with Rpi 3. Are overclock settings adjusted for Pi 3 ?
>
> When i am setting "moderate" overclocking, than in the
> /mnt/mmcblk0p1/config.txt
> i can see:
>
> arm_freq=900
> core_freq=333
> sdram_freq=450
> over_voltage=2
> force_turbo=0
> gpu_mem=16
>
> the defa
I am playing with Rpi 3. Are overclock settings adjusted for Pi 3 ?
When i am setting "moderate" overclocking, than in the
/mnt/mmcblk0p1/config.txt
i can see:
arm_freq=900
core_freq=333
sdram_freq=450
over_voltage=2
force_turbo=0
gpu_mem=16
the default arm freq in Pi 3 is 1.2Ghz ?
-
Greg Erskine wrote:
> Hi fsger,
>
> Please refer to this post:
> http://forums.slimdevices.com/showthread.php?105018-Announce-piCorePlayer-2-00&p=852039&viewfull=1#post852039
>
> You need to ssh into your pi and use vi. Let me know if you need further
> information.
>
> regards
> Greg
Brillia
I was hoping this case from the PiHut would work with the HiFiBerry but
it's a little to shallow so strapped a USB DAC to the back instead :D
20407
+---+
|Filename: IMG_18371.jpg|
|Downlo
feeder6 wrote:
> Hi guys,
> I hope that somebody can help me. I have installed jivelite on
> picoreplayer 2.04. I alos installed vu meters. The vu meters are showing
> but the needles don't move. The same with spectrum analyser. I can
> switch to the analyser but nothing moves.
>
> Greetings Dan
I wish he made the Raspberry Pi a little more recessed into the middle
so there would at least be the possibility of hiding the cables. With
the location of the Pi, there is no chance to avoid a couple cables from
protruding.
--
Hi guys,
I hope that somebody can help me. I have installed jivelite on
picoreplayer 2.04. I alos installed vu meters. The vu meters are showing
but the needles don't move. The same with spectrum analyser. I can
switch to the analyser but nothing moves.
Greetings Daniel
10 matches
Mail list logo