starbender wrote:
> Hi All,
>
> I done lots of forum search but couldn't find answer to my problem. I'm
> trying to use waveshare 5" hdmi touchscreen with picore
>
Searching for waveshare provided in 2 seconds this thread and these two
instructions.
'Thread'
Thanks for the tips Greg. The temperature graphing option looks useful
- I'll try that while stressing the RPi4. The logging options look
useful too. I stopped playing once I'd got the basic setup working this
evening, but will come back to it. I was having a bit of trouble with
the speaker
Also, when you visit various pCP pages, especially diagnostics pages, a
log is generated.
These logs are viewable thru [Main Page] > [Diagnostics] > [Logs]. This
makes it easier to cut and paste. If you are in [Beta] mode, you will
also get a [Pastebin] button, for uploading to pastebin.
We
chill wrote:
> I had a few mis-steps, I think caused by leaving my 3B+ running so that
> I had an easy reference to set up the RPi4. This meant that both RPis
> were creating players with the same names and I had two instances of LMS
> on my network. Since sorting all of that out I haven't
Greg Erskine wrote:
> There is also a CPU Temperature graph page:
>
> [Main Page] in [Beta] mode > [Extras] > [CPU Temp]. Press [Start].
>
> This will start a process to record the CPU temp every minute. Page will
> refresh automatically.
nice. Thanks!
*Home:* VBA 4TB (2.4)>LMS
There is also a CPU Temperature graph page:
[Main Page] in [Beta] mode > [Extras] > [CPU Temp]. Press [Start].
This will start a process to record the CPU temp every minute. Page will
refresh automatically.
Greg
chill wrote:
> Main Page -> 'Diagnostics' button -> 'Raspberry Pi' tab
Duh! Right in front of me. Thanks!
p.s. my 3B+ with a digi hat, all enclosed in a metal case is 61 degrees
while just streaming music with no other activity.
*Home:* VBA 4TB (2.4)>LMS 7.9.1>Transporter, Touch, Boom,
garym wrote:
> Where in the piCorePlayer webGUI do I find the temperature information?
Main Page -> 'Diagnostics' button -> 'Raspberry Pi' tab
chill's Profile: http://forums.slimdevices.com/member.php?userid=10839
View
chill wrote:
> I have a very small heatsink on the RPi4, and I noticed the temperature
> nudge over 70 degrees while I was installing plugins and scanning my
> music library, but most of the time it's sitting around 60 degrees.
> That's without a case but with a hat-type PCB severely limiting
Thanks for this beta. Just back from a weekend away so I've been giving
it a try. I've installed it on a 4GB RPi4, and it all seems to be
working very nicely. It's running LMS, with my music on an SSD, and
it's also running three players: a USB DAC (via a user command on the
tweaks page), a
Ok, will do.
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch
(Study 2), few spare unit's
*Server:* LMS on Pi3 7.9.1. on PcP 3.21
*Network:*
edwin2006 wrote:
> Logging is off.
> I due use the equlizer, could that be the culprit?
> 27666
Dont think equalizer is a problem, but who knows.
Goto Main->Diagnostics->Sound then ...when squeezeltie stops.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
paul- wrote:
> Actually, you can just refresh the squeezelite page and expand. It will
> show you if the card is there.
>
> 27665
>
> One other thingmake sure you don't have logging turned on, this will
> fill up the memory if left on too long. logging should only be turned
> on for
Actually, you can just refresh the squeezelite page and expand. It will
show you if the card is there.
27665
One other thingmake sure you don't have logging turned on, this will
fill up the memory if left on too long. logging should only be turned
on for diagnostics.
paul- wrote:
> Im sure you rebooted already, but how about aplay -L. Feels like you
> dac might be flaking out and disappearingYes, I did reboot (couldn't mis the
> music while working)
What is aplay -L?
How can me find out if the dac is the problem (all is brand new)?
Thanks for your
I got it to work by reinstalling piCorePlayer.
Thanks
rocky2889's Profile: http://forums.slimdevices.com/member.php?userid=5486
View this thread: http://forums.slimdevices.com/showthread.php?t=110730
edwin2006 wrote:
> Again gone. Last time was june 25th, so it ran ok for about two weeks.
> Restarting squeezelite gives me an error "Squeezelite is not running "
Im sure you rebooted already, but how about aplay -L. Feels like you
dac might be flaking out and disappearing
piCorePlayer a
There is not a network manager running on pCP, so if you boot with WiFi
and eth0, and then unplug the Ethernet cable, there is nothing to change
the default route.
Boot with just WiFi, and you should be fine..or what Ronnie said
too.
piCorePlayer a small player for the Raspberry Pi in
The difference between pCP and Raspbian is a crap load of mount helpers.
So you have to know all of the correct options. Take a look at dmesg
you will definitely see some error messages. The kernel will default to
vers=3, but it will still complain if you dont specify. If the same
mount line
Man in a van wrote:
> Starting with this now. Thanks Team :)
>
> I have had to make a few atemtps to connect to my Qnap NAS shared file,
> but got there in the end.
>
> I just had vers=3 in the options box in my working pCP on a rpi1B and
> that connected fine.
>
> On the rpi4B (4gb ram) I
Greg Erskine wrote:
> hi Man in a van,
>
> BTW: This is a BETA pCP6.0.0 thread.
>
> What do you have in your config backup? It should be small. If its big
> enough to trigger warning messages there is a problem. This will slow
> down boots!
>
> Look at the "diagnostics" log. [Main Page ] >
Just a guess, but your wireless connection will have a different IP
Address, perhaps give this the necessary permissions in Synology?
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
edwin2006 wrote:
> And again this morning. Reboot the pi and back again.
> So when gone pcp is just running and i can access pcp gui and also via
> ssh but lms does not pick up the player. Simply not showing it.
> This is weird
Again gone. Restarting squeezelite gives me an error
Hi All,
I done lots of forum search but couldn't find answer to my problem. I'm
trying to use waveshare 5" hdmi touchscreen with picore
I get language selection screen on my lcd but touchscreen does not work
so I couldn't do anything with it.
Is there any trick to make it work or am I doing
24 matches
Mail list logo
