Hello!
I am using a Pi 3B+ with the 7" Display, a Hifiberry DAC+ Pro and an
USB SSD in a SmartiPi Case with piCorePlayer and activated LMS, so I
have everything in one case.
I am interested in putting the LMS outside of this onto a Pi 4B/4GB with
the USB SSD attached there.
The Pi3B+ is only
bondav wrote:
>
> I just struggled with point 7 : when you copy all this : "sudo
> TSLIB_FBDEVICE=/dev/fb0 TSLIB_TSDEVICE=/dev/input/event0
> /usr/local/bin/ts_calibrate" you just have this "sudo
> TSLIB_FBDEVICE=/dev/fb0 TSLIB_TSDEVICE=/dev/input/event0".
> I have to add manually the second
JQW wrote:
> Those modules are there if you install Jivelite.
So they are! Thank you - that's a start.
chill's Profile: http://forums.slimdevices.com/member.php?userid=10839
View this thread:
Those modules are there if you install Jivelite.
JQW's Profile: http://forums.slimdevices.com/member.php?userid=66930
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
JQW wrote:
> Getting there. I've discovered the modprobe commands to install the
> framebuffer:
>
> >
Code:
> > modprobe flexfb setaddrwin=0 width=240 height=240
Sounds like something is not getting backed up, I'll have to check the
pairing process to make sure an automatic backup is being done.
After you pair, I would press the save button in that table
once...that will for sure run a backup.
piCorePlayer a small player for the Raspberry Pi
The connect button is not available after reboot PCP. The message "No
Paired Device" in the device pairing section is visible.
1x Picoreplayer with Hifiberry DAC/ADC pro, 3x Picoreplayer with
Jivelite 7" Display und IQaudio DigiAmp+, 2 Picoreplayer 6 Beta on
RPI4+ LMS, Marantz PM-15S1
ralphy wrote:
> Yes, you can use a keyboard for navigation.
Thank you for your fast response!
I realise I wasn't clear enough though...
I have the keyboard "shortcuts" / "commands" mapped to my universal
remote using Flirc and the keymap you linked to.
It works perfectly well, but
piCorePlayer, is purely focused on the LMS ecosystem.. I have
no reason to run others, so I don't spend time to develop (Not that I
have extra time to kill either :)
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
coyrls wrote:
> I'm getting a number of messages in the form: "[ 12.526153] random:
> slimserver.pl: uninitialized urandom read (4 bytes read)", also with 32,
> 64 and 256 bytes read, at the end of my dmesg output. Is this anything
> to worry about? It suggests that the process
Gerhardc wrote:
> I have tried your procedure without success. When i restart squeezelite,
> the Headphone connection is restored. When PCP ist rebootet and after
> this the Headphone is powered on,
> the Headphone is trying to connect with PCP without success (the
> Headphone is telling me
Paul Webster wrote:
> Note though ... all 4 buttons and audio device work together on Raspbian
> using the Pimoroni scripts / set-up - so there is something clever going
> on behind the scenes.
> I have not had time to look inside their scripts to see all that they do
> (and I don't have the
chill wrote:
> Main Page -> Beta Mode Operations : Extras -> Bootcodes
Thanks chill. That was it. Changed time from 2 to 4 seconds and now all
works as expected.
*Home:* VBA 4TB (2.5)>LMS 7.9.2>Transporter, Touch, Boom, Radio (all
ethernet)
*Cottage:* VBA 3TB (2.4)>LMS
Note though ... all 4 buttons and audio device work together on Raspbian
using the Pimoroni scripts / set-up - so there is something clever going
on behind the scenes.
I have not had time to look inside their scripts to see all that they do
(and I don't have the hardware to experiment with)
I
Main Page -> Beta Mode Operations : Extras -> Bootcodes
chill's Profile: http://forums.slimdevices.com/member.php?userid=10839
View this thread: http://forums.slimdevices.com/showthread.php?t=110642
paul- wrote:
> Do you have a wiring diagram for the whole thing?.but it sounds like
> you need to do some rewiring.
Unfortunately not. I could simply re-route the button to another unused
GPIO pin, but the board is far too delicate for me to attempt it.
You can try Raspbian OS, install LMS and Squeezelite then
https://yabb.jriver.com/interact/index.php?topic=115513.0
I run Raspbian Desktop OS with LMS, Squieezelite, a seperate
Spotify-Connect, so it might just work (I'm thinking, not at the same
time :) ).
I have tried the jriver stuff on a
chill wrote:
> It sounds like the USB disk might be a little slow to start up: maybe
> the difference is that when you reboot it's already running.
>
> There's a 'usb wait' setting somewhere in pCP (I'm not at home so can't
> check exactly where), and the default is, I think, a couple of
Man in a van wrote:
> If you haven't already, try applying the "hotfix" ? (from the Main page
> tab)
>
> ronnie
Thanks. applied the hotfix and it shows as successfully applied. But no
change in problem. After a SHUTDOWN, USB drive doesn't mount. But
following that with a REBOOT, the USB
It sounds like the USB disk might be a little slow to start up: maybe
the difference is that when you reboot it's already running.
There's a 'usb wait' setting somewhere in pCP (I'm not at home so can't
check exactly where), and the default is, I think, a couple of seconds.
It might be enough
If you haven't already, try applying the "hotfix" ? (from the Main page
tab)
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
Craig wrote:
> I must admit to having zero knowledge of Linux but with the help of this
> forum I built a Pi based LMS using PiCorePlayer and also use it to store
> all my music on a SSD.
>
> Is it possible to run other programs too? I'm thinking of JRiver Media
> Centre which I use for all
Yatsushiro wrote:
> I had something similar when my RPi was not getting sufficient
> power/volts to run it and the USB drive. Is your drive on a powered hub?
Thanks.
No, USB drive is connected directly to rPi. I'm using the same model
powersupply to run this rPi as my other two (both 3B+).
I had something similar when my RPi was not getting sufficient
power/volts to run it and the USB drive. Is your drive on a powered hub?
Yatsushiro's Profile: http://forums.slimdevices.com/member.php?userid=66935
View this
I must admit to having zero knowledge of Linux but with the help of this
forum I built a Pi based LMS using PiCorePlayer and also use it to store
all my music on a SSD.
Is it possible to run other programs too? I'm thinking of JRiver Media
Centre which I use for all my music management, they
I'm getting a number of messages in the form: "[ 12.526153] random:
slimserver.pl: uninitialized urandom read (4 bytes read)", also with 32,
64 and 256 bytes read, at the end of my dmesg output. Is this anything
to worry about? It suggests that the process slimserver.pl is trying to
read
I have tried your procedure without success. When i restart squeezelite,
the Headphone connection is restored. When PCP ist rebootet and after
this the Headphone is powered on,
the Headphone is trying to connect with PCP without success (the
Headphone is telling me that). My Headphone is a Bose
Power cycle the headphones after starting pCP.pCP is set to allow
any paired device to automatically connect, so the connection is driven
from the Bluetooth device.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
magnuslsjoberg wrote:
> Is there any way to navigate the Jivelite with tab or arrow keys alone?
>
> I have my piCorePlayer connected to my TV and it all works very well
> except the fact that I would like to navigate the UI like I do with
> Apple TV and similar,
> i.e. to use the arrow keys to
My Bose Headphone is successfully connected to PCP. If PCP is restartet
after pairing, the Headphone is not reconnected. Any help?
1x Picoreplayer with Hifiberry DAC/ADC pro, 3x Picoreplayer with
Jivelite 7" Display und IQaudio DigiAmp+, 2 Picoreplayer 6 Beta on
RPI4+ LMS, Marantz PM-15S1
30 matches
Mail list logo
