Ok, i had bee searching online on ways to know how i can map out my own
button to my IR remote to upload on Picoreplayer.
Is there special software to download on my laptop in order for me to
create my own map out the buttons from a IR Remote to upload on Picore
to use
36113
FMatos wrote:
> Moved to 3rd Party Software Forum
https://forums.slimdevices.com/showthread.php?115207-Problem-playing-DSF-files-via-UPnP
FMatos's Profile: http://forums.slimdevices.com/member.php?userid=71884
View this
paul- wrote:
> I routinely run bluetooth on 4 rpi boards for testing. They all just
> work
>
> RPI3
> RPI3B+
> RPI4
> RPI4 - aarch64
>
> I realize the web interface says bluetooth is on, but can you check to
> be sure bluetooth is enabled in the config.txt?
Hey Paul. I see nothing like
64 bit comes with more memory overhead. But I guess you need to gage
performance for yourself. Most will find 32bit very adequate, and it
still receives much more testing from RPi's side too.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
I routinely run bluetooth on 4 rpi boards for testing. They all just
work
RPI3
RPI3B+
RPI4
RPI4 - aarch64
Are you sure bluetooth is enabled in the config.txt?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Hey. I upgrade pCP from 6.1.0 to 8.0.0 (clean install). Now Bluetooth
isnt working. I have a RPi 3B+ with a wifi dongle. I tried 32 and 64
bit, no difference.
Here a few logs.
CURRENT /OPT/.FILETOOL.LST
Code:
opt
home
etc/asound.conf
etc/group
etc/gshadow
paul- wrote:
> Got my Zero-2W, With the 32 bit pCP8 image, the only thing I had to
> update is the config.txt, and add netusb to the boot partition.
> Networking worked fine.
>
> The 64bit image requires a bit more to get it to boot. I'm in the
> process of building kernels and doing some
paul- wrote:
> Got my Zero-2W, With the 32 bit pCP8 image, the only thing I had to
> update is the config.txt, and add netusb to the boot partition.
> Networking worked fine.
>
> The 64bit image requires a bit more to get it to boot. I'm in the
> process of building kernels and doing some
Got my Zero-2W, With the 32 bit pCP8 image, the only thing I had to
update is the config.txt, and add netusb to the boot partition.
Networking worked fine.
The 64bit image requires a bit more to get it to boot. I'm in the
process of building kernels and doing some testing.
piCorePlayer a
Right now, I have a Justboom IR remote. I'm had been looking at adding a
IR remote.
Is it hard and how would i go by writing Lirc to the Ir remote to custom
to the player. 36108
+---+
|Filename: image_2021-11-05_024001.png
10 matches
Mail list logo