Hello everyone,
I am currently on pCP 3.5, and I would like to upgrade to pCP 4.0. I
pilot my RPI3 via the Squeezer application on Android.
My question: will all my favorites (especially radios) disappear? If so,
will I have to reprogram them all?
Is there a way to save all this, and not lose
ralphy wrote:
> You can set the skin in $HOME/.jivelite/userpath/settings/SelectSkin.lua
> and restart jivelite.
> >
Code:
> >
> settings = {skin="PiGridSkin",}
>
> >
Hello,
Thank you very much, that was the information I wanted!
ralphy wrote:
> Try the Pi Grid Skin
>
> In Jivelite go to Settings->Screen->Select Skin->Grid Skin
> (800x480)->Keep Skin
Hello!
Thank your for your help, that's not bad.
Is there a way for me to be able to set it manually (if yes where can I
find the variable ?)
System: External hard
Hello everybody,
Do you know is there a way to enlarge the size of the album thumb under
Jivelite ?
25499
Thank you for your hlep.
+---+
|Filename: 20180813_110352.jpg
paul- wrote:
> Can you post a screenshot of your LMS config page in pCP.
Hello!
Here:
24586
+---+
|Filename: Settings LMS.jpg |
|Download:
bakker_be wrote:
> Are your USB keys always mounted on the same location after a restart?
Hello,
Yes, my USB keys are always mounted on the same location.
paul- wrote:
> No, it is not normal or expected. Provided you are setting up LMS and
> using the drive mounting routines on the
paul- wrote:
> That should be on a persistent location no backup should be needed.
> Check the LMS logs for any clues
Hello,
If I understand correctly, isn't it normal that I have this problem?
What should I find as a clue in the LMS logs?
Thank you for your reply.
System: External
Hello everyone,
Excuse me if the problem has already been raised but I did not find the
solution on the forum.
My installation: USB keys --> Raspberry Pi 3 (PiCorePlayer 3.22) -->
Alientek D8 XMOS USB --> Q acoustics 3020
Problem: Every time I restart my Raspberry Pi 3, I have to
Francis-Kabrel wrote:
> Besides, does anyone have an explanation as to what command to read the
> files correctly: iec958: CARD=Audio,DEV=0?
Can anyone enlighten me that this command works and not others? :)
System: External hard drive --> Raspberry Pi 3 (PiCorePlayer 3.11) -->
Man in a van wrote:
> Save the usb and reboot then go back to the page and select
>
> "Output Setting"
>
> There should be one or two options to select.
>
> Choose one, save and reboot.
>
> See how you go.
>
> Try another if the first choice does not work
It's okey ! With this setting :
bakker_be wrote:
> Hello,
> somthing strange here ... This post
> (http://forums.slimdevices.com/showthread.php?107269-PiCorePlayer-FDA-Amplifier-(Alientek-D8)/page2)
> leads me to believe you already have working sound from your PCP +
> Alientek. So the issue would be with correctly recognising
Thanks for your answers, I try tonight with the 2 settings in "Ouput
Setting" and I will tell you the results.
I think my USB drive is mounted correctly. I followed the normal steps
with "Set USB Mount" etc ... respecting the warnings that you show on
your screenshot.
Man in a van wrote:
> which version do you have
>
>
>
> it will also depend (I think ) on the drivers being supported bu pCP.
>
> have you tried a different output in the Dropdown selection box.
Hello!
I have the USB XMOS version of the Alientek D8.
Do you know which drivers support pCP?
bakker_be wrote:
> Hello,
> what kind of USB key? A DAC?
Hello!
My music is stored on a basic USB key (8GB).
I don't have a DAC, my Alientek D8 is a digital amplifier.
Francis-Kabrel's Profile:
Hello everyone,
I come to you following a problem of USB Audio output on Raspberry Pi 3
with pCP 3.11.
I plugged a USB key on my Raspberry Pi 3, integrated 24bit / 192kHz
files to my LMS since the latter, then connected all to my Alientek D8
Amplifier on USB.
Problem: The Alientek puts me that
epoch1970 wrote:
> The issue comes from the fact you shut off the amp, so the USB device
> goes away.
> When you start again the amp, the device probably comes back, but it's
> not the same one (within the OS). Have you tried restarting squeezelite
> rather than rebooting?
Hello !
So I haven't
16 matches
Mail list logo
