I've got PCP 5.0.0 running normally and got a HifiBerry Digi+ Pro (yay
overnight shipping). I installed it on the Pi, connected a TOSlink
cable to it and my soundbar, and powered on the Pi. I set the output
device to HifiBerry Digi+ Pro, saved, and rebooted when prompted. At
boot, it gets to "
Hi all - got a question that arose from a basic setup of PiCorePlayer.
My receiver is a basic 5.1 receiver that only has RCA inputs/outputs.
My soundbar is a Yamaha one with coax audio and TOSlink inputs. I'm
running a basic Analog-Digital Converter from my receiver's output to
the soundbar.
Man in a van wrote:
> If you receiver has digital imputs and you don't use DSD files then you
> can find a spdif hat for the pi, or a hat with analogue outputs, plenty
> to choose from.
>
> I would recommend a reputable name and not a cheapo from you know where
> :)
>
> ronnie
>
It only has
That did the trick, thank you! It's a bit on the quiet side but I'm
guessing I'll need a DAC since it's coming out of my headphone jack and
right into my receiver by way of a 3.5 to RCA splitter.
I appreciate all the help!
I burned the image using a Windows machine and was prompted to format
the disk in order to read it. I'll double check later but I don't think
I was able to open the SD card in Explorer without formatting it.
MohnJadden's P
paul- wrote:
> The console is set for autologon.To be honest, I have not used the
> setup method in a long time... Dropping a wpa_supplicant.conf on the
> boot partition works so much easier.
Is there a way to do that without a Linux machine available other than
the Pi itself? I was able
paul- wrote:
> After you set the wifi parameters, you need to backup, then reboot.
>
> Setup with keyboard and mouse instructions are listed here Scroll
> down to the second section.
>
> https://www.picoreplayer.org/how_to_setup_wifi_on_pcp_without_ethernet.shtml
>
> of course the first
paul- wrote:
> After you set the wifi parameters, you need to backup, then reboot.
>
> Setup with keyboard and mouse instructions are listed here Scroll
> down to the second section.
>
> https://www.picoreplayer.org/how_to_setup_wifi_on_pcp_without_ethernet.shtml
>
> of course the first
I'm running a brand new burned image of PicorePlayer 5.0, standard
build, on a Pi 3B+. It boots just fine. I'm not connected to Ethernet
since I have no wired network connectivity by my stereo.
When I run setup and enter the correct wifi setup info - including all
correct case letters - and