Month later and I think I have a good ending to this story.
First, RPi support for SD cards HAS issues:
https://elinux.org/RPi_SD_cards
Having seen this page the day of my last post, in a last ditch effort I
ransacked all nearby devices and discovered Toshiba's card in one of the
family
Unfortunately it doesn't go away - I think I'll just sell it and buy
some android box with digital output...
Here is how it dies (just tried to refresh LMS library after some time
idle):
[660378.888722] mmc0: fsm 1, hsts 1
[660378.888725] mmc0: PIO read timeout - EDM 10861
[660378.04] mmc0:
Used Samsung Evo Plus and two different lines of Kingston.
The only thing that may be related is that I have another NTFS-formatted
microSD as /dev/sda1 and it somehow confuses PCP.
Below is inifinite reboot loop that went away after physically removing
the 2nd card.
'[image:
Is there anything that can be done with SD card issues on PCP and RPi in
general?
Today, after a couple of days of doing nothing (no power loss
inbetween!) I tried to do something with LMS - and got message about
lack of write permissions to settings directory on mmcblk0p2. Rebooted -
bang! -
bondav wrote:
> Hello,
> can you explain how to do the ts_calibration and the ts_test?
> thanks
> david
For my Waveshare screen:
cat /proc/bus/input/devices -> find right parameters to use below (like
fbx, eventy)
sudo TSLIB_FBDEVICE=/dev/fb1 TSLIB_TSDEVICE=/dev/input/event0
bondav wrote:
> Hello,
> can you explain how to do the ts_calibration and the ts_test?
> thanks
> david
cat /proc/bus/input/devices -> find right parameters to use below (like
fbx, eventy)
sudo TSLIB_FBDEVICE=/dev/fb1 TSLIB_TSDEVICE=/dev/input/event0
/usr/local/bin/ts_calibrate
optional: sudo
After digging in dmesg output it appeared, it was the dreaded EXT4fs
error.
I have just reinstalled the whole pcp.
Xyzzy's Profile: http://forums.slimdevices.com/member.php?userid=68578
View this thread:
It's literally right there with all the other screensaver settings...
It must have been some selective blindness on my side.
Xyzzy's Profile: http://forums.slimdevices.com/member.php?userid=68578
View this thread:
Thanks.
And any information that could be helpful for rebinding KEY_ENTER event
to Play/Pause action in main player screen?
Xyzzy's Profile: http://forums.slimdevices.com/member.php?userid=68578
View this thread:
PCP 4.0
After power loss event, pcp now starts only to prompt
(tc@piCorePlayer:~$).
Power cycling does not change the situation. It seems networking is not
started, as I cannot connect to pcp with SSH.
What's wrong?
Hi
There's option for a screenblanker in Jivelite when Playing or Paused.
What with just doing nothing (displayed as Off in the main playing
screen or just when setting options or similar)?
Xyzzy's Profile:
Hello,
Is there any info available about action bindings for ui elements in
jivelite skins?
I use simple Android remote, works perfectly, but jivelite skins
apparently haven't been designed with remote on mind (like on main
Playing screen both OK and Arrow Right open the current playlist).
I
korrus wrote:
>
> I have similar problem with my display. It's 5 inch from Waveshare too.
Did you complete calibration with ts_calibrate?
Xyzzy's Profile: http://forums.slimdevices.com/member.php?userid=68578
View this
paul- wrote:
>
> Screenblank will only work with the Official RPI display.
Thanks Paul, some disappointment with hardware here :/
And still a question remains :)
I can see there is screensaver for Playing state and for Paused state.
My simple remote switches between *Off* and Playing states
Hello
Another issue:
After adding jivelite.sh in tce, jivelite seems to not persist settings
- after each reboot I have select language etc anew.
Also, settings for Sleep mode or screenblanker do not work.
I suspect jivelite has now issues wit saving settings (???).
Any advice?
paul- wrote:
> excerpt from pcp_startup.sh
>
> >
Code:
> >
> # Alternative jivelite script, mainly used for waveshare devices. Located
on persistent partition. (/mnt/mmcblk0p2 or partition where tce is located)
> if [ -x $TCEMNT/tce/jivelite.sh ]; then
> echo
Hello,
How do I pass environmental variables to jivelite? I've found
suggestions to update jivelite.sh, but no working tutorial for this.
My problem:
https://forums.slimdevices.com/showthread.php?109619-Touch-off-with-Jivelite-Waveshare-5-quot-on-piCorePlayer
Well, the issue was that jivelite was picking wrong parameters for
display.
When I run:
sudo SDL_VIDEODRIVER=fbcon SDL_FBDEV=/dev/fb0
SDL_MOUSEDEV=/dev/input/event0 SDL_MOUSEDRV=TSLIB
/opt/jivelite/bin/jivelite.sh &
it works correctly.
The correct parameters were the ones I provided when using
Hello
I am running RPi 3B with Waveshare 5" (B) screen, piCorePlayer 4.
I can calibrate the screen properly with ts_calibrate and touch works
correctly with ts_test, but then touch is away from touching point in
Jivelite.
I use Grid Skin 800x480 to match the screen, but the issue seems to be
19 matches
Mail list logo
