I install picoreplayer 6.00 in PI4 (4g ram)
I want to Max the output volume in USB port to my USB DAC
I can success to change the volume but cannot save on my sccard. ( once
I turn off the power in my Pi.4 , setting will lose I need to redo
again ) but as before I can save it on
how about
-v pcm
is ok to max the vol
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread: http://forums.slimdevices.com/showthread.php?t=110642
sorry
what is the command line
to max the volume output
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread: http://forums.slimdevices.com/showthread.php?t=110642
Hi
I just upgrade from 4.0 to 5.0
My DAC is Mcinotsh D150
After upgrade to 5.0 the all setting is same (volume is 100% output)
but the sound from the amplifier is very small compare with using 4.0
I want to know how to solve it (already change the DAC drive like
hw: or others setting
I find that when I use iPad to control roll down or up to select the
song in picoreplayer 3.2ver sometimes I heard some pop sound at the
background of the music is it the wifi defective if I change to use
with external wifi adaptor can solve it or not. Also I find that when I
up sampling it
If I connect to my external USB DAC to listen music
Any different between 3.2 audio and normal ver. I meant the sound
quality.
Before I use 3.1 audio ver with WiFi is OK but I cannot use 3.2 audio
with Wifi.
so I change to use 3.2 normal ver.
3.2 normal sound will poor than audio ver. ?
wifi in rpi3
Works just fine on my 2 rpi3 systems, and my zero-w systems. Must be an
issue with your router setup, more than likely channel configuration.
I use auto in channel but still fail . what section I need to set I in
my rounter I work fine in 3.11 thanks
But why some people said it can
wifi in rpi3
Works just fine on my 2 rpi3 systems, and my zero-w systems. Must be an
issue with your router setup, more than likely channel configuration.
I use auto in channel but still fail . what section I need to set I in
my rounter I work fine in 3.11 thanks
But why some people said it can
Please confirm that you are using the kernel version 4.9.21-pcpCore_v7.
This is shown in the footer of the web pages. ?
piCorePlayer | piCorePlayer v3.20 | linux 4.9.21-pcpAudioCore_v7 |
piCore v8.01 | Squeezelite v1.8.6-957 | Thu May 4 10:49:19 HKT 2017
cannot detect the internal wifi in
ifconfig wlan0 down
ifconfig wlan0 up
No wifi devices found!
eth0 Link encap:Ethernet HWaddr B8:27:EB:62:DF:ED
inet addr:192.168.0.106 Bcast:192.168.0.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1923 errors:0 dropped:11 overruns:0 frame:0
TX
already change to 1 still fail
why 3.11 is ok
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
Works just fine on my 2 rpi3 systems, and my zero-w systems. Must be an
issue with your router setup, more than likely channel configuration.
I use auto in channel but still fail . what section I need to set I in
my rounter I work fine in 3.11 thanks
wifi in rpi3
I use 3.2 final in rpi3 but internal wifi is fail cannot scan any
network
but 3.11 is ok
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread:
I use 3.2 final in rpi3 but internal wifi is fail cannot scan any
network
but 3.11 is ok
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread:
now I am using rip3b connect usb DAC , my dac support dsd and 24/19200
I want to upsample only 16bit/ 44.1hz to 24bit/192hz . if dsd or high
than 16/44.1 don't change
what command line I need to input in upsample -r 44.1
because I don't know how to set. thanks
I want to upsample only -16bit/ 44.1hz to 24bit/192hz -. if dsd or high
than 16/44.1 don't change
what command line I need to input in upsample -r 44.1
because I don't know how to set. thanks
htctyo's Profile:
My device is Rip3b , I use 3.2beta7 with internal Wifi but fail.
Cannot scan any SSID . But use 3.11 is fine Wifi is OK
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread:
tc@piCorePlayer:~$ wodim -scanbus
scsibus0:
0,0,0 0) 'BUFFALO ' 'HD-PNFU3' '' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'HL-DT-ST' 'BD-RE BP40N ' 'GP01' Removable
CD-ROM
1,1,0 101) *
in the log file it show in 3.11
17-04-19 11:23:19.2722] Slim::Schema::forceCommit (2149) Warning: Trying
to commit transactions before DB is initialized!
[17-04-19 11:25:15.5049] Plugins::CDplayer::CDhandler::cdromstatus
(1134) Cannot open device: /dev/cdrom error:No such file or directory
(2)
3.2beta7
cannot connect Wifi
My devvice is RiP3b
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread: http://forums.slimdevices.com/showthread.php?t=107223
I make the same setting in 3.02 and 3.11 but 302 can 311 cannot
How can I check permission of the user
Thanks
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread:
Can you confirm that you ran the CDplayer plugin 1.09 OK on PCP 3.02
with no problems.
yes no problem can play cd in 3.02 but 3.11 fail
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this
thanks sir
I already follow your instruction to install , done
but why it still show [ cannot access the cdrom drive check name and
whether another app is using the drive
-1 ]
before I can use in 3.02 ver but why in 3.11 fail
can you teach
I understanding through webpages but how it knows my rip3 address it
will auto install
Because I use putty I also need to input my rip3 IP address I can use
Lam cable or wifi
htctyo's Profile:
Thanks Paul
I want to know. I also need to use Putty to transfer to Rip3 under the
following command line
pcp-load -r http://picoreplayer.sourceforge.net/tcz_repo/8.x/armv7/tcz
-w -i pcp-cdda2wav.tcz
Am I correct , if not correct , pls teach me . many thanks.
how to set it in mirror , pls teach in step by step
also where is the extension page for repo
thanks
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread:
I use picoreplayer 3.11 but when I download it show
ERROR ] cdrom-4.4.39-pcpAudioCore_v7+.tcz Missing PCP DEP file
I think not support ver3.1.1 anyone have the updated link for 3.11
thanks
htctyo's Profile:
Now my RPI3b already install cdplayer 1.09 plugin and insert the CD-ROM
through USB IN MY RPI3 with ext power supplier but still cannot listen
CD through ipeng
Can anybody help me how to setup step by step in windows 10 because I
don't have any Linux system i really need this function many many
28 matches
Mail list logo
