Paul Webster wrote:
> On the pCP Squeezelite page ... click "more" for the field "Output
> setting".
> If the overlay worked then you should see some suitable device listed
> there ... click some and try.
Not sure if the overlay worked. The list of output devices appears to be
standard list
paul- wrote:
> We will have to add that in a future release. In the meantime you
> should be able to just edit the config.txt on your boot disk and add
>
>
> dtoverlay=hifiberry-amp3
I added dtoverlay=hifiberry-amp3 to conifg.txt, and verified that it
exists on the diagnostics page.
paul- wrote:
> We will have to add that in a future release. In the meantime you
> should be able to just edit the config.txt on your boot disk and add
>
>
> dtoverlay=hifiberry-amp3
Fantastic news. Ill do that & report back. Thanks Paul
Hi,
Would it be possible to add support for hifiberry amp3? I tried a fresh
install of 8.2 and selected Hifiberry DAC+ (and Pro, AMP2) but
squeezelite failed to launch.
Happy to run any diagnostics or tests to support this. Thanks
paul- wrote:
> What are you trying to pair? Some devices just don't behave well.
> The scan is only for 10seconds, so sometimes you have to run scan a
> couple of times to see your device.
I'm pairing a Nuimo controller. It appears in the list when I run a
scan
35843
I was able to
Hi,
I'm using a PI-4 & piCorePlayer 8.00
I can successfully scan for devices, but the list of devices does not
populate for pairing, See attached.
Any ideas?
35838
+---+
|Filename: bt-pairing.png