The devices (Amplifier, Sat-Receiver and RPI) are hidden in the
cupboard, but are controlled via CEC. So the TV is the single input
device...
Haaarald's Profile: http://forums.slimdevices.com/member.php?userid=60922
View t
Why do you have a screen at all?
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=109777
___
psketch wrote:
> Haarald
>
> Glad you got this fixed, but I'm curious why you don't think about using
> Jivelite? This will give you a nice "now playing" screen option, and
> you can set timeouts for the differents modes (playing, paused, off) so
> you don't have to worry about the OLED.
>
> p
Haarald
Glad you got this fixed, but I'm curious why you don't think about using
Jivelite? This will give you a nice "now playing" screen option, and
you can set timeouts for the differents modes (playing, paused, off) so
you don't have to worry about the OLED.
pete S
---
I finally found a solution for me: setting a screensaver in
cmdline.txt. The TV screen is on but black - which is sufficient for the
OLED.
Changed: consoleblank=0 -> consoleblank=1 logo.nologo
I dont know which one did it or if both are necessary, I close my
investigation due to having a sol
paul- wrote:
> No that wont work, as init runs long before a restore of your backup is
> done. You would need to create a new initrd archive with that file in
> it, then add it after the main initrd in config.txt
>
> Also, I believe piCore only operates in single user mode. If someone
> want
Or, could you just install Jivelite on pcp and then set the screen saver
to blank?
psketch's Profile: http://forums.slimdevices.com/member.php?userid=56555
View this thread: http://forums.slimdevices.com/showthread.php?t=1
No that wont work, as init runs long before a restore of your backup is
done. You would need to create a new initrd archive with that file in
it, then add it after the main initrd in config.txt
Also, I believe piCore only operates in single user mode. If someone
wants some help testing, Here
Haaarald wrote:
> Pushing up again. Im searching for the same solution. As my multimedia
> is controlled via CEC over the TV, this is always running when playing
> music. Is it possible to get no video output? I have a OLED and these
> dont like static pixels.
>
> Thanks,
> Harald
Try changi
There is a "noautologin" bootcode.
I have not tried it so I don't know what, if any, consequences it has to
the piCorePlayer booting process.
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
Vi
pputzer wrote:
> It does work, but I still get a login prompt on tty1. How can I disable
> that as well?
Pushing up again. Im searching for the same solution. As my multimedia
is controlled via CEC over the TV, this is always running when playing
music. Is it possible to get no video output? I
It does work, but I still get a login prompt on tty1. How can I disable
that as well?
pputzer's Profile: http://forums.slimdevices.com/member.php?userid=36842
View this thread: http://forums.slimdevices.com/showthread.php?
Paul Webster wrote:
> The end of /opt/bootlocal.sh calls /pcp_startup.sh
> >
Code:
> >
> /home/tc/www/cgi-bin/pcp_startup.sh 2>&1 | tee -a /var/log/pcp_boot.log
>
> >
>
> So - if you edit that to send output directly to /var/log/pcp_boot.lo
hi George_,
Did you do a [Backup] or $pcp bu before rebooting?
Remember, pCP is RAM based, changes are usually in RAM and need to
backed up to mydata.tgz.
regards
Greg
Greg Erskine's Profile: http://forums.slimdevices.c
Hello Paul,
thank you for your advice. I changed the command in /opt/bootlocal.sh as
you suggested, but there is no change. The message of the start of pCP
still appeares. As this is only a minor thing for me, I'll leave it as
that.
Regards George
---
The end of /opt/bootlocal.sh calls /pcp_startup.sh
Code:
/home/tc/www/cgi-bin/pcp_startup.sh 2>&1 | tee -a /var/log/pcp_boot.log
So - if you edit that to send output directly to /var/log/pcp_boot.log
rather than to tee then it might well do
Hello,
by adding "console=tty3", "quiet", "loglevel=3" and "logo.nologo" to the
"cmdline.txt" I managed to get a black screen during booting. What still
appeares are the console-messages from piCorePlayer while starting. Is
it possible to suppress these messages too so that the screen is
complete
17 matches
Mail list logo