I've got an old HiFimeDIY Sabre USB DAC which works fine with 3.22, but
I can't make Squeezelite on 3.5 see it at all. DMESG seems to see it
fine
[3.358066] usb 1-1.3: Product: HiFimeDIY DAC
[3.358076] usb 1-1.3: Manufacturer: HiFimeDIY Audio
[3.372801] input: HiFimeDIY Audio
AngloCuencano wrote:
> I repeated the in situ upgrade to 3.5.0 audiocore, and this time
> everything worked as expected.
Good to knowI wish I knew why some of you are having problems with
insitu_updates. I do updates all the time for testing, and never have
issues.
piCorePlayer a small
paul- wrote:
> Yes, the RPi2 is an armv7 device. What Dac are you using? Hifiberry
> Dac+ on a RPI3 is working flawlessly. Did you check your digital volume
> control on the "Card Control" page? Otehrwise more diagnostics is going
> to be needed.
I repeated the in situ upgrade to 3.5.0
Insitu from 3.22 to 3.5.0 on RPI2B worked except for restarting LMS. It
said LMS was running but it was not. I had to (re)start LMS manually to
get it running. No big deal, probably fixed with 3.5.1 :-)
does the all-black SB sound better than the white SB?
Thanks guys for the update it looks like you have made some great
improvements but I am struggling to get it to work on my RPI3.
Previously I was running PCP 3.22 Audio with an Allo Digione, LMS with a
USB SSD mounted and SAMBA to allow me to synch the SSD with my NAS.
The in-situ update from
AngloCuencano wrote:
> I did an insitu update from 3.22 to 3.5.0 audiocore. Everything appeared
> to go OK, audio output was set automatically to Hifiberry DAC+ (and Pro,
> AMP2) and squeezelite was running. If I attempt to play a file, the web
> UI shows the file to be playing, but there is no
I did an insitu update from 3.22 to 3.5.0 audiocore. Everything appeared
to go OK, audio output was set automatically to Hifiberry DAC+ (and Pro,
AMP2) and squeezelite was running. If I attempt to play a file, the web
UI shows the file to be playing, but there is no sound. Rebooting and
powering
If you are trying to use exfat or want the disk size to display properly
on the USB mounts section, from the Main menu, in beta mode.Press
the Hotfix button.
If those options don't matter to you.then there is no need to do do
anything.
piCorePlayer a small player for the Raspberry Pi
Thank you for this new release. The insitu upgrade of my RPi3, with the
official Pi Touchscreen and an IQaudIO card went very smoothly (the Wifi
and Ethernet IP address did change, but that's about it!)
eiffel's Profile:
get an error message that says “this player does not support Napster. A
Squeezebox 2 or higher is required.”
Napster doesn't allow us to play on anything but SB hardware.
--
Michael
___
unix mailing list
unix@lists.slimdevices.com
Problem solved, was missing network name in SSID box. Was not paying
attention to details. Thanks for the help as I then retraced steps to
find the obvious. Thanks
MCarson's Profile:
paul- wrote:
> -D option has different parameters now, but ask over in the squeezelite
> thread.
Hi Paul,
just edited my former post. Found the solution :-)
Thanks again.
marflao's Profile:
marflao wrote:
> Aaa...never used beta mode ;-)
>
> After enabling the "Native/DoP DSD Squeezelite" binary, DSD 64 is played
> fine and shown as "PCM 352" on my DAC's display (was DSD 64 under pCP
> v2.00).
> DSD 128 files are played but without any sound. Display also shows
>
Hi I just re-tested wifi connection on a RPi3 B+ and pCP 3.5.0 - it
works fine.
So there is a problem at your end.
The error message you describe is seen if you have provided the wrong
password or SSID name. Therefore please check that you are using the
correct names. There is also some
Ive the new Pi 3B+ and have installed the new PiCoreplayer 3.5. The
WiFi on boot up cannot connect and keeps reporting error for wireless
request set ESSID (8B1A) : too few arguments. I can connect with a
wired connection.
The Second problem Im having is when trying to stream from Napster I
paul- wrote:
> Go to beta mode.
Aaa...never used beta mode ;-)
After enabling the "Native/DoP DSD Squeezelite" binary, DSD 64 is played
fine and shown as "PCM 352" on my DAC's display (was DSD 64 under pCP
v2.00).
DSD 128 files are played but without any sound. Display also shows
marflao wrote:
> Thanks Paul,
>
> I'm still lost where i can find this.
>
> If i look at the "Squeezelite Settings" site the bottom of that page
> shows "Various Options". So - D shouldn't be entered here anymore but
> neither I'm sure if you meant i should look here nor what do enter (in
>
Very nice. Just one glitch for me with the in situ - I'd previously set
a static wired IP, but after the update somehow DHCP got turned on so
the IP address was different (found it with Advanced IP Scanner).
Turning off DHCP restored the original IP address.
paul- wrote:
> DSD support is now in a different binary. -D is not valid on the normal
> Squeezelite...look all the way at the bottom of the squeezelite
> page, and select the DSD version of Squeezelite.
Thanks Paul,
I'm still lost where i can find this.
If i look at the "Squeezelite
edwardthern wrote:
> Your post seems very defensive. My post was not meant to be an attack.
>
> Thank you for your comments.
Edward,
No worries.just trying to clarify to others that read it. Any to
your first commentyes it's a bit quirky. I tried 100s of different
ways, and this
marflao wrote:
>
> So squeezelite is running BUT:
> after choosing the "advanced mode" and enter -D in the "Various Options"
> field (in pPC v2.00 I used this to be able to play dsf files),
> squeezelite is stopping.
> Once I delete -D squeezelite is running again but then there is no sound
>
Thank you !
I just upgrade on a PI3B +, I have 9 radios squeezebox boom and 3
squeezelite, the system is much more responsive than the pi3B.
I first upgraded pircoreplayer to 3.5 on the B, then I inserted the SD
card in the B +, I kept all the configuration, with the usb backup
Thanks again,
sbp wrote:
> Please report the content of the config.cfg file - you can see the
> content on the "About" page.
> I would also help if you could provide us with the content in the marked
> red square.
Thanks for getting back to me, sbp.
The content of the cfg file is as follows:
A big heartfelt thanks to the devs for this amazing piece of software.
The upgrade went smoothly and the audio version sounds better than ever.
My only question is whether there is a difference between a clean
install and the insitu update. I remember such a thing from the old
Windows days where
Please report the content of the config.cfg file - you can see the
content on the "About" page.
I would also help if you could provide us with the content in the marked
red square.
+---+
|Filename: usb.JPG
I´m currently a bit stuck.
Insitu didn´t work for me (but this is not 3.5 related, it didn´t work
for earlier version, too). Haven´t digged deeper why this doesn´t work
hence I flashed the image.
Filled out "Audio Output device" (USB Audio), saved and filled out the
"Output settings" which I
edwardthern wrote:
> Your post seems very defensive. My post was not meant to be an attack.
>
> Thank you for your comments.
Im sure you appreciate Pauls hard work giving us bluetooth. So along
with your notes and comments perhaps a small thank you is in order ?
rPi 3 + rasPi 7" LCD +
paul- wrote:
> Yes it canif you use external wifi or use the RPi3B+ on a 5GHz
> channel, or if you use an usb bluetooth device. There is a message on
> where to look regarding the internal bluetooth.
>
> 24780
>
>
> What external bluetooth did you try. It has to have HCI support. The
>
edwardthern wrote:
> So I tried the Bluetooth speaker support.
>
> Built-in Wifi and Bluetooth cannot be on at the same time, YET it allows
> you to proceed with 'trying' to use Bluetooth without warning or any
> built-in messages to prevent the inevitable failure. This can and
> probably will
JQW wrote:
> I had a brief play earlier today, installing from scratch as my Pi has
> been temporary repositioned for another use. I had one problem - I
> couldnt get an exFAT formatted USB drive to show files when mounted. In
> addition my NTFS drive was showing double capacity in the web
So I tried the Bluetooth speaker support.
Quirky but it works, and most importantly it auto-magically reconnects
if you cycle the power on your bluetooth device
Quirks;
Built-in Wifi and Bluetooth cannot be on at the same time, YET it allows
you to proceed with 'trying' to use Bluetooth without
I had a brief play earlier today, installing from scratch as my Pi has
been temporary repositioned for another use. I had one problem - I
couldnt get an exFAT formatted USB drive to show files when mounted. In
addition my NTFS drive was showing double capacity in the web interface
when mounted.
kidstypike wrote:
> i) LMS has nothing to do with this.
> ii) You have the option to choose at step 3.
>
> 24778
Many thanks for the swift response. Much appreciated.
Will give it a try.
Thanks pCP team
marflao's
marflao wrote:
> Quick ones:
> i) can insitu be used if LMS is located on a NAS (or has LMS nothing to
> do with this)?
> ii) in case insitu will be used to which version of pCP will be upgraded
> (normal or audio optimized)?
i) LMS has nothing to do with this.
ii) You have the to choose option
Quick ones:
i) can insitu be used if LMS is located on a NAS (or has LMS nothing to
do with this)?
ii) in case insitu will be used to which version of pCP will be upgraded
(normal or audio optimized)?
marflao's Profile:
Thanks pCP Team :cool:
rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 +
HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8 |
huxmut's Profile:
In situ updates to two pCp players on rPi 2B worked perfectly.
Thank you pCP Team.
A camel is a racehorse designed by a committee.
Seen sprayed on the outside wall of the local library -
Three things I hate in life :
1. Vandalism
2. Irony
3. Lists
BTW, the AP is very cool. Makes it really easy to put a battery on one
of these and slap it in the car.
Once again, thank you very much.
Howard
paul- wrote:
> 24 MAR 2018 - PICOREPLAYER 3.5.0
>
> The pCP team has released an update for piCorePlayer.
>
> Here are the major changes:
>
> >
Insitu install on garage pCp/jivelite no problems.
Insitu install on study pCp/jivlite/LMS > squeezelite and LMS not auto
starting, network share not mounted. Adding the option ver=1.0 to the
"Options" field and rebooting cured all 3 problems
Thanks
24777
As a pCP newcomer, this is awesome!
I just updated -insitu- with absolutely no issues. Thanks!
TomAmes's Profile: http://forums.slimdevices.com/member.php?userid=27792
View this thread:
You are amazing!!
Howard
paul- wrote:
> 24 MAR 2018 - PICOREPLAYER 3.5.0
>
> The pCP team has released an update for piCorePlayer.
>
> Here are the major changes:
>
> > > >
- RPi 3B+ Support.
- Kernel 4.14.26
- RPi Firmware 14 Mar, 2018.
- Moves to a 9.x piCore Base.
- Moved
501 - 541 of 541 matches
Mail list logo
