INFO ] Downloading LMS...
[ INFO ] Downloading: perl_common_sense.tcz
[ INFO ] Checking MD5 of: perl_common_sense.tcz.OK
[ INFO ] Downloading: perl_linux_inotify2.tcz
[ INFO ] Checking MD5 of: perl_linux_inotify2.tcz.FAIL
[ ERROR ] There was a error downloading slimserver.tcz.
[ INFO ]
nervoteso wrote:
> ok. i'm trying to format sd with sd card formatter: it deletes all the
> files but it can't start formatting (0%). with quick formatting doesn't
> finish (92%). can i use that sd car anyway?
I don't know.
Considering the problems to seem to have been having, I would use a
nervoteso wrote:
> is there any way to check if server are on?
>
> should i reformat sd if lms downloading fails?
>
> please let me know when servers are ok
paul- wrote:
> It was a regional network issue, I cant check too much, as where I am
> everything is fine. I burned an image, and
I just downloaded lms again, no problems on a Pi4 64bit. I am in the
US. Odd, we use cloud flare cdn services. Their system status shows
everything is fine. of course.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> The files checkout on the repo, and the US servers. I did just update
> them today, we have had some problems with our CDN cache not clearing
> worldwide, so I bumped the CDN's cache, hope that gets it.
>
> How big did you resize your SD card?
300 mb
Touchx2,radiox4,
slartibartfast wrote:
> Why so small?
>
> Sent from my SM-G900F using Tapatalk
it's written in the guide
https://www.picoreplayer.org/how_to_install_lms.shtml
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
kidstypike wrote:
> I don't know.
>
> Considering the problems to seem to have been having, I would use a
> fresh card, 8 or 16GB is ample.
go to buy 16gb sd card. in the meantime i hope servers come back. this
installation is a nightmare
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi
Hi,
I am trying to build squeezelite from git on Raspbian. Are there any
recent build instructions I can look at? The
packages/libraries/dependencies required etc? And a reference for what
the various build options do?
Thanks.
It was a regional network issue, I cant check too much, as where I am
everything is fine. I burned an image, and had lms installed in. Less
than 5 min.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
nervoteso wrote:
> 300 mbWhy so small?
Sent from my SM-G900F using Tapatalk
slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609
View this thread:
kidstypike wrote:
> And me. Use 2000 minimum.
ok. i'm trying to format sd with sd card formatter: it deletes all the
files but it can't start formatting (0%). with quick formatting doesn't
finish (92%). can i use that sd car anyway?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and
Wigster wrote:
> Hi,
>
> I am trying to build squeezelite from git on Raspbian. Are there any
> recent build instructions I can look at? The
> packages/libraries/dependencies required etc? And a reference for what
> the various build options do?
>
> Thanks.
My 'squeezelite armv6hf build'
ok thanks. in the meantime, i've reinstalled my old dear pi3:-)
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this
nervoteso wrote:
> it's written in the guide
>
> https://www.picoreplayer.org/how_to_install_lms.shtmlSo it is. Still seems
> very small to me.
Sent from my SM-G900F using Tapatalk
slartibartfast's Profile:
No - you are just having a run of bad luck.
Hopefully one of the pCP team will be able to double check the
repositories to see if the problem is at their end.
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
is there any way to check if server are on?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
slartibartfast wrote:
> So it is. Still seems very small to me.
>
> Sent from my SM-G900F using Tapatalk
how much should i resize?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's
slartibartfast wrote:
> So it is. Still seems very small to me.
>
> Sent from my SM-G900F using Tapatalk
And me. Use 2000 minimum.
*Server - LMS 7.9.2 *Pi4B 4GB/pCP 6.0.0-b6 18K library, playlists & LMS
cache on SSD (ntfs)
*Study -* Pi3B+/pCP 5.0.0/pi screen/HiFiBerry DAC+/jivelite,
If the filesystems doesn't download from the web interface either, you
can grab this way
pcp-load -r http://picoreplayer.sourceforge.net/tcz_repo -wi ntfs-3g.tcz
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Paul Webster wrote:
> Don't forget to add in the extra file system support.
>
> You can also do the rest but setting static IP address can sometimes be
> troublesome. Might be easier to reserve address in your router
> (especially if you have not set a reserved range for fixed Ip
> addresses).
paul- wrote:
> Well, it seems that there is no good solution for all. We moved from
> sourceforge, as they had alot of problems for sometime, but I think that
> is mostly resolved. I'm going to setup a mirror repo back on
> sourceforge, see if that helps. Here is a temporary instruction, let
paul- wrote:
> Please keep a list of all the plugins that you install..you never
> gave us that list last time. One of them is likely what caused your
> problems. So install one at a time, and make sure everything is fine
> before installing the next one.
i installed spotty, youtube and
paul- wrote:
> No, you cannot follow any instructions that use Raspbian. Hardware
> connections are fine.
>
> Im sure the download problem will resolve after the weekend is done.
ok many thanks.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
paul- wrote:
> I just downloaded lms again, no problems on a Pi4 64bit. I am in the
> US. Odd, we use cloud flare cdn services. Their system status shows
> everything is fine. of course. I checked the main data server too.
>
> I've seen some DNS problems with some providers not
Well, it seems that there is no good solution for all. We moved from
sourceforge, as they had alot of problems for sometime, but I think that
is mostly resolved. I'm going to setup a mirror repo back on
sourceforge, see if that helps. Here is a temporary instruction, let me
know. I can then
Don't forget to add in the extra file system support.
You can also do the rest but setting static IP address can sometimes be
troublesome. Might be easier to reserve address in your router
(especially if you have not set a reserved range for fixed Ip
addresses).
Paul Webster
Thanks ronnie,
We have been working on odd problems for several months, we just can pin
things down. And about time we figure something out to open a ticket,
it starts working fine. When working it is nice to have worldwide
servers to speed things up for users, but there is only so far we
Thanks for correcting me. I was typing on my iPad at that
time..Siri never says what I mean :)
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Leave the screen off for now, you never used it before. Installing
jivelite is a bit difficult to do manually.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> Leave the screen off for now, you never used it before. Installing
> jivelite is a bit difficult to do manually.
are you going to make jivelite install available on the web interface
soon?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
Please keep a list of all the plugins that you install..you never
gave us that list last time. One of them is likely what caused your
problems. So install one at a time, and make sure everything is fine
before installing the next one.
piCorePlayer a small player for the Raspberry Pi in
paul- wrote:
> Just try occasionally from the interface to install Jivelite. The
> ability to select/change mirrors is a significant code update and will
> not be in until the the next update.
ok thanks.
any chance if i follow this?
I landed on this forum recently and thought I may have been a member
much earlier. Anyway, I'm so thrilled with how friendly and helpful
people are here.
I speak, for example, to how the community came together and helped here
"Migrating from LMS on RedyNas to LMS on PI(absolute beginner!!!)"
paul- wrote:
> Leave the screen off for now, you never used it before. Installing
> jivelite is a bit difficult to do manually.
INFO ] Mount configuration changed for 192.168.1.2:/multimedia
[ INFO ] Checking new Mount Point /mnt/Music.
[ INFO ] Mounting Disk.
[INFO] mount -v -t cifs -o
nervoteso wrote:
> ok it's gone, it is looking for mujsic.
>
> can i install spotty, youtube and bandcamp plugins?
Yes you can.
That is done from LMS web interface which knows nothing about the pCP
repository.
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
nervoteso wrote:
> ok thanks.
>
> any chance if i follow this?
>
> https://www.instructables.com/id/Raspberry-Pi-Touchscreen-Setup/
Read through this instead
http://archimago.blogspot.com/2017/03/howto-building-and-installing-raspberry.html
paul- wrote:
> No, you can follow any instructions that use Raspbian. Hardware
> connections are fine.
>
> Im sure the download problem will resolve after the weekend is
> done.
I think @paul- means no, you *cannot* use these instruction to install
Jivelite.
*Server - LMS 7.9.2 *Pi4B
ok it's gone, it is looking for mujsic.
can i install spotty, youtube and bandcamp plugins?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
kidstypike wrote:
> @nervoteso
>
> I seem to recall you ordered a Flirc case for your Pi4? I'm not sure
> how you're going to attach a 7" screen to your Pi when it's in that case
> :confused:
>
> I use a Pi4 for LMS only (top line of my signature), and a separate
> Pi3B+ for
everything came back to work. hope it keeps.
please update me when it will be available on the interface the install
for display.
thanks for all the support
i forgot tio say you i also installed audioscrobbler plugin
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
Just try occasionally from the interface to install Jivelite. The
ability to select/change mirrors is a significant code update and will
not be in until the the next update.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
No, you can follow any instructions that use Raspbian. Hardware
connections are fine.
Im sure the download problem will resolve after the weekend is done.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
yes it's ok. lms now is running. now what should i do, can i set static
ip and mount qnap disk?
can i also rename lms name?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
nervoteso wrote:
> ok thanks. the last time i did'nt add file system support. there is not
> track in the guide
Yes you did, you just forgot. You would be unable to mount a network
drive without it.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
paul- wrote:
> If the filesystems doesn't download from the web interface either, you
> can grab this way
>
> >
Code:
> > pcp-load -r http://picoreplayer.sourceforge.net/tcz_repo -wi ntfs-3g.tcz
> >
i use putty to add fs support?
can i install jivelite before mounting disk?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
@nervoteso
I seem to recall you ordered a Flirc case for your Pi4? I'm not sure
how you're going to attach a 7" screen to your Pi when it's in that case
:confused:
I use a Pi4 for LMS only (top line of my signature), and a separate
Pi3B+ for player/controller (second line of my signature).
47 matches
Mail list logo
