prabbit wrote:
> Assuming you have already installed the Material Plugin, choose Server
> Settings > Interface > Web Interface and select Material Skin.
piCorePlayer is a stripped down operating system, it doesn't have web
browser to display Material skin, instead it runs "Jivelite" which
With pCP, we only run a framebuffer. Any web browser is going to
require a Xorg. While running Xorg is possible on piCore, it's a whole
different level of complexity.
*_I_have_not_tried_this_in_the_slightest_*,
and there could be conflicts between the picore and pCp repos, so don't
do this
paul- wrote:
> Make sure you do a backup after installing the applets.
Boom! Winna Winna. Thank you!! That was it! :D
fphredd's Profile: http://forums.slimdevices.com/member.php?userid=33133
View this thread:
paul- wrote:
> No browse function. Just type in the correct info.
That's odd, I've just been trying to do that very thing earlier this
evening. It just appears to be a dropdown selection box, no amount of
clicking/double clicking allows me to type a path in there.
Of course I could be
prabbit wrote:
> Assuming you have already installed the Material Plugin, choose Server
> Settings > Interface > Web Interface and select Material Skin.I have a
> feeling he means on a touchscreen instead of jivelite.
Sent from my Pixel 3a using Tapatalk
slartibartfast wrote:
> I have a feeling he means on a touchscreen instead of jivelite.
>
> Sent from my Pixel 3a using Tapatalk
Thanks I did
PiCorePlayer 7.1 on Allo Digi One Signaturewith (Lounge)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry Dig+
(Office)
PiCorePlayer 8.1
No browse function. Just type in the correct info.
What OS are you running on your desktop. I'm sure someone can help with
that.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> Look at ralphy's post. See the S32_LE in the url. That is what does
> it.
Thanks; I understand that this is what makes sure the _output_ is the
right one, I was wondering if I need to change any setting to also make
sure that the _input_ is correct?
Perhaps it wasn't clear
thanks Paul
Since theres no browse function to get to a network share i assume i
just add the correct path to the txt box?
PiCorePlayer 7.1 on Allo Digi One Signaturewith (Lounge)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry Dig+
(Office)
PiCorePlayer 8.1 with pi official
markiii wrote:
> Thanks, I knew that. However Firefox exists in the tinycore extension
> repository which is available in PcP
Yes, I know that you knew that. My post was in response to another
response to your post. *That* respondent didn't seem know that.
:confused::rolleyes::)
*Server -
I have an unusual problem. Every now and then my music folder shows up
in LMS as empty. To find it again, I change the NFS version (so if it
was 4.1, I change it to 4.0 and vice versa) and remount and reindex.
Running pCP 8.1.0 on a Rpi 4 and the music is stored on a Synology
DS218+. Thanks for
I'm aware its not exactly PnP as a browser extension would need to be
installed and I beleive xsessions, but I also don't think its
impossible.
So has anyone figured out how to get Material in a browser onto a
picoreplayer install? It makes Jivelite look very dated, so would be
nice to do
Assuming you have already installed the Material Plugin, choose Server
Settings > Interface > Web Interface and select Material Skin.
prabbit's Profile: http://forums.slimdevices.com/member.php?userid=11142
View this
kidstypike wrote:
> piCorePlayer is a stripped down operating system, it doesn't have web
> browser to display Material skin, instead it runs "Jivelite" which
> emulates a Squeezebox Touch.
Thanks, I knew that. However Firefox exists in the tinycore extension
repository which is available in
Since I maintain the aarch64 version of piCore, I should be more versed
in the Xorg stuff, but one of the other guys does the X stuff. Never
had an interest, as my pies are mostly headless. But the speed of the
rpi4 and material skin is pretty nice. I have a 7" rpi screen sitting
around, I
Thanks Paul, I'll have a play and report back
PiCorePlayer 7.1 on Allo Digi One Signaturewith (Lounge)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry Dig+
(Office)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry
DAC+(Kitchen)
Radio (Bedroom)
PiCorePlayer 8.1 with pi
Is a power outtage, or planned reboot involved?
pCP starts much faster than a NAS will, so the mount will fail, unless
you tell pCP to wait for a while. Setting is on by the network mount
setup, and I think the default is 30sec.
piCorePlayer a small player for the Raspberry Pi in RAM.
Ok great - my filename is the same as yours so I'm going back to the
first workaround again i.e. for the 24d bug.
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread:
paul- wrote:
> The input and output side of the card have to run at the same bit depth.
> Squeezelite will open the output side of the card are S32_LE by
> default. So that's what you need to do on the input side.
Where do I change settings like that for the input side?
I noticed some blank
You can save the image to a networked drive.
Or Save the image to the local device, and then use winSCP to transfer
image to your PC.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> If it wont run, it likely means something is missing from your system.
> Too much has changed in pCP since 6.1, I just don't remember. I would
> just set it up from scratch using the latest installation.
Ok, thanks.
Try using this URL instead
Code:
http://:9100/*S32_LE*/44100/2/F
The sample format needs to match for input and output for the Hifiberry
ADC card.
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *2*-UE Radio
'Squeezebox client builds'
If it wont run, it likely means something is missing from your system.
Too much has changed in pCP since 6.1, I just don't remember. I would
just set it up from scratch using the latest installation.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
Thanks, I tried that but it did not make any difference. I noticed that
in the PCP GUI, it says (bold is my emphasis):
To play stream from LMS, play URL as follows.
http://192.168.2.129:9100
i.e. http://192.168.2.129:9100/S16_LE/44100/2/F
*pCP will stream 16bit*, 44.1khz, 2 channels, flac
walking through the install script and have identified at least one spot
where things don't happen:
# As all the insitu update is done in one file, it may be better to
define this here
UPD_PCP="/tmp/pcp_insitu_update"
Looking at this option on the frontpage of the PcP web interface
Is it possible to have it save the image file to the PC i'm using to
access the web interface from?
Several of my PcP deployments are in inaccessable areas of the loft
PiCorePlayer 7.1 on Allo Digi One Signaturewith (Lounge)
Look at ralphy's post. See the S32_LE in the url. That is what does
it.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Has anyone successfully streamed analogue input via HiFiBerry DAC+ADC
and the PCP Streamer for Audio Input?
I am running PCP 8.1.0. I have added a HiFiBerry DAC+ADC HAT to my Pi3B,
because I want to start using the "Streamer for Audio Input"
functionality. I have connected the line out from my
You don't need license manager for custom clock anymore. Make sure you
do a backup after installing the applets. If I recall, some parts of
Custom Clock needs to be installed manually. I run it, but it's been a
really long time since I installed.Local storage for jivelite is at
Updating lirc won't make a difference as it only has a fix for irrecord
and SDL is bundled in the jivelite extension.
To check the sdl version;
Code:
tc@rpi$ *ls -l
/tmp/tcloop/pcp-jivelite/opt/jivelite/lib/libSDL-1.2.so.0.11.?*
-rwxr-xr-x1 root root
The input and output side of the card have to run at the same bit depth.
Squeezelite will open the output side of the card are S32_LE by
default. So that's what you need to do on the input side.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
31 matches
Mail list logo
