Thanks subnet was wrong
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
hello
just bought a raspberry pi 3, installed picoreplayer. i've resized
partition, installed lms, installed additional files sytem. i would like
to mount music from qnap, i'0ve set the mount point (a music folder
"mnt/music) and set ip address of qnap (192.168.1.108) and the share
folder (the
d6jg wrote:
> That combo works perfectly.
actually i notice rebuffering issue in flac files. i hope it depends on
lms has not finished library analysis yet
Touchx3,Boomx2,1 radio, 1 classic!Squeezebox Server 7.7.2 (Qnap ts-119)
d6jg wrote:
> Obviously the scan needs to complete but mostly it depends on the
> network. Do NOT try to run either the QNAP or LMS Pi wirelessly. It's
> asking for trouble.
> Ideally connect them both wired to the same router/switch.
Every player, nas and raspberry are wired i don't use wifi.
d6jg wrote:
> And there as well!
Thanks everything is working fine now. I don't know why but i can't set
dsm on the web interface, i have to set it on each player
Touchx3,Boomx2,1 radio, 1 classic!Squeezebox Server 7.7.2 (Qnap ts-119)
Is it possible to plug raspberry to touch display and use as a touch
squeezebox player ? I mean control the web interface of picoreplayer
from the touch display
Touchx3,Boomx2,1 radio, 1 classic!Squeezebox Server 7.7.2 (Qnap ts-119)
d6jg wrote:
> I have LMS on a Pi2 and a Pi3 both piCorePlayer with music on QNAP.
> Music is mostly FLAC (some 96/24) I have zero buffering so not sure why
> you would have such an issue.
> Actually 2 x QNAP one is a Ts109 so even Lower power than your 119.
> Something isn't right if you get
d6jg wrote:
> You don't need to uninstall from QNAP at this stage just install on Pi
> and point players at Pi. If all good then switch off LMS on QNAP. If
> it's TS119 you do it in SSOTS in Qpkgs.
i can't see the "don't stop the music" menu in the player, where is it?
Touchx3,Boomx2,1
DJanGo wrote:
> Servers always have to have static ips! !infinite!
> whats your "router" modell?
It's pirelli, maybe should i disable dhpc to see the ip menu, but i am
afraid i male problems
Touchx3,Boomx2,1 radio, 1 classic!Squeezebox Server 7.7.2 (Qnap ts-119)
DJanGo wrote:
> if you cant - then set the rpi to a static address. but most (even a
> very cheap chinese one) all in one router/switch devices that provides
> dhcp - can handle dhcp reservation.
> google your routermodellname and dhcp.
But if it changes ip, should i do analysis again?
I can't set a static ip on my router
Touchx3,Boomx2,1 radio, 1 classic!Squeezebox Server 7.7.2 (Qnap ts-119)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
d6jg wrote:
> On Touch home screen Choose Player and select piCorePlayer - is that
> what you mean?
I mean use raspberry with a touch display, a kind of touch player,
controlling web interface from his display
Touchx3,Boomx2,1 radio, 1 classic!Squeezebox Server 7.7.2 (Qnap ts-119)
d6jg wrote:
> If the QNAP changes IP you will have to redo the connection in
> PiCorePlayer and it will probably need a rescan.
>
> Assuming your router is 192.168.1.1
>
> Go to Network in QNAP and set the static address to
> IP address 192.168.1.2
> Net mask 255.255.255.0
> Gateway
If i set 124 and 125 for qnao e pi and set router range from 100 to 123?
102 and 103 are already in use
Touchx3,Boomx2,1 radio, 1 classic!Squeezebox Server 7.7.2 (Qnap ts-119)
nervoteso's Profile:
DJanGo wrote:
> yes !
>
> but i answered him many days ago please look @ the picoreplayer thread.
> His answer was - ohh that much to much text/answers i cant find my way
> to solve the initial setup.
>
> Now we end here with a big thread guessing and trying instead of - "want
> this -> do
DJanGo wrote:
> take a look here - was just a simple google thing.
>
> http://screenshots.portforward.com/routers/Pirelli/NetGate_VoIP_v2/LAN_Settings.htm
>
> Set the Address range outside of your static addresses and your done.
>
>
> btw:
>
>
> btt Do you have two lms in your lan?
Yes
d6jg wrote:
> 002 & 003 not 102 & 103
ah ok thanks
Touchx3,Boomx2,1 radio, 1 classic!Squeezebox Server 7.7.2 (Qnap ts-119)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
a last issue: after assigning new ip to qnap i can't see qnap folder in
the windows share folders, instead i see them on mac. i need to see it
in windows cos i use dbpoweramp to rip cd to famc files. any help?
thanks
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
hi
lastfm stopped working on raspberry, it says clock is not correct and
i've to update clock. i checked timezone of berrys and it says this:
CET-1CEST,M3.5.0,M10.5.0/3
how can i update with my timezone? i live in rome italy
thanks
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and
lms is running but i can't configure it.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
finally solved. i has to reboot amd stop lms more times. now clock is ok
and also i can see and configure lms
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
paul- wrote:
> The onboard ethernet is even a poor implementation. Plugging in a USB
> Gigabit ethernet will give the better throughput (You will need to load
> the net-usb-KERNEL.tcz that is included.)
>
> Back to the OP's question. Have you copied the drive already? I would
> copy it
i'm doing backup cos qnap manager says there is an anomaly on volume 1
of my qnap hds (they're set in raid 1). now everything is still working
fine but maybe i should change the hd with errors. if i change the
failed hd with an other hd (the same brand but 2 tb instead a tb) and
rebuild raid 1
Mnyb wrote:
> You mount the drive in picore web interface and set the path you have in
> LMS settings for music library.
i see this on web picofreplayer
Mount Point /mnt/
i set Mount Point /mnt/music?
in the usb hd the files are stored inb directory music.
now the LMS path is the one of
Mnyb wrote:
> That wold work very well .
>
> Reading the files is faster on USB than the network, scanning would be
> faster .
>
> I don't have any suggestions for a suitable USB drive .
thanks. just bought a toshiba usb. so should i plug usb hd in raspberry
and then mount it? should i set
drmatt wrote:
> .. and all of a Pi's I/O hangs off that USB bus .. and even plugging in
> a gigabit USB port on a USB 2 seems somewhat pointless.
>
> A Pi is not a good server. Convenient, very, but it's no file server.
> Banana Pi is much better (PCI linked gig-e and SATA, but even that still
hello
now i've raspberri pi 3 and it reads files mounted on qnap ts 269l. qnap
is having issues, could i copy all files from qnap to a normal usb hd
and use this usb hd with rasp for LMS? could it be a way to make LMS
work better then QNAP?
thanks
Touchx2,radiox4, Squeezebox Server 7.9
does anyone use 7 touchscreen? is it cool?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
paul- wrote:
> The display is mainly to control players. Is your Pi4 just a LMS
> server, or are you using is as a player. This is a fairly nice case
> for the screen and pi. Updated for the Pi4, (I have a couple of the
> first version)
i bought it for pi3 but never opened the box, could
paul- wrote:
> Yes, it is compatible.
should i follow all these steps also in picoreplayer?
https://www.instructables.com/id/Raspberry-Pi-Touchscreen-Setup/
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
a new issue: i've installed playlist manager plugin, and then, it
started a new analysis but never ended. when i restarted lms it asked
again my folder music and it said i had to install 7.9.2. then restarted
and now it 's ok. very strange.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi
Installed display: very nice
Thanks
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
reinstalled pi3 and mounted qnap disk and it works. should i install
5.0.0 on pi4? reinstall lms?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
if i write uid=1001,gid=50 is ok, it is mounted (but lms is not
running), if i add vers=2.0 or 3.0 it says error.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
ok i've entered in pi4
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
Paul Webster wrote:
> Anything changed ... e.g. wireless and changed its location or wired and
> dislodged the cable?
>
> Can you SSH into it?
>
> Edit: any sign of the yellow lightning bolt on top right of the screen
> when it starts up or later? If yes - it means power supply might not be
>
Paul Webster wrote:
> Looks like the NAS mounted after some retries.
>
> Check the LMS logs.
where are lms logs? i set show logs but i don't see in diagnostics
i see these:
[19-11-02 19:14:53.6314] main::init (387) Starting Logitech Media Server
(v7.9.2, 1572359887, Tue Oct 29 16:56:53 CET
paul- wrote:
> We really need to figure out what is going on, or will just happen
> again. Is your NAS mounting fine with those options?
it has worked until this afternoon. suddenly stopped working. settings
in nas are ok. but it seems now qnap nas has not mounted. if i reinstall
pi3,
paul- wrote:
> You do it from the web interfaceGoto the pCP web interface, where
> you took the screenshot of your network mount. I don't know which vers
> your NAS supports, you will have to try them. When you press the "Set
> Net Mounts" button, see what it says. If it doesn't work try
i don't know, it worked fine in 2.06 and fine also in 6.0.0 until some
hours ago.
can you tell me how can reinstall everything from beginning?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
here's
+---+
|Filename: Cattura3.PNG |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=28458|
+---+
paul- wrote:
> I would run scard formatter, and also verify the card is good. not a
> counterfeit.
ok i try to remove lms before and then reinstall everything. would it be
better 5.0.0?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
again problems: lms stopped working. not lms iis s not running. tried to
restart picoreplayer and lms but nothing to do. lms no running. also it
says mount disk error (qnap).
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
Starting piCorePlayer v6.0.0-b6 startup...
Checking for boot files on mmcblk0p1...
Trying to mount /dev/mmcblk0p1.
ssh file found on mmcblk0p1.
newpcp.cfg not found on mmcblk0p1.
Setting default piCorePlayer repository...
Generating sound card drop-down list...
Loading configuration file...
lms not running.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
here's the mount settings
+---+
|Filename: Cattura1.PNG |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=28454|
is there any way to reinstall everything from the beginning? should i
format sd and copy again image?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
paul- wrote:
> Lets try a different route, Can you start an ssh session to your device
> and do this
>
> >
Code:
> >
> tc@piTouch:~$ sudo /usr/local/etc/init.d/slimserver start
> [19-11-02 16:48:58.0911] main::init (387) Starting Logitech Media Server
(v7.9.2,
i've written that command, it says a lot of stuff, how to copy ?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this
paul- wrote:
> What worked in 2.06 definitely wont work today. The kernel changed.
> Use the keyboard and add the vers= option.
but it has worked fine also on 6.0.0.
should i use keyboard on display? or could i disinstall display and plug
to hdmi?
which vers?
Touchx2,radiox4,
paul- wrote:
> vers=2.0,uid=1001,gid=50
>
> If that does not work, try vers=3.0 or vers=1.0
i don't see vers=2.0 i see only uid=1001,gid=50, i try to add vers=3.0
at the end
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
paul- wrote:
> That is the easiest way
in the console it says access denied
login as (what should i write?)
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
should i format the sd and copy again the picore image?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
removed lms but i can't seem to reinstall, it says error in
downloadingreinatall everything
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
32 sd i bought it had NOOBS preinstalled; could have it been this the
problem?
i di not format the sd the first time
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
paul- wrote:
> I'm not sure we are talking the same language. From the Logs LMS is
> clearly running, what are you unable to do?
logs says that but lms is not running
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
paul- wrote:
> Try vers=1.0
>
> But if the Disk is mounted, then that is not the issue What else
> have you installed since it worked? Have you been installing plugins?
yes playlist manage
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
paul- wrote:
> So LMS is running just fine then. Can you be specific about what you
> are seeing?
i see lms is not running. players can't access to picoreplayer. don't
work anything. plkease let me know how to reinstall everything from
beginning
i see this but lms is not running
[70-01-01 01:00:34.4937] main::init (387) Starting Logitech Media Server
(v7.9.2, 1572359887, Tue Oct 29 16:56:53 CET 2019) perl 5.028000 -
arm-linux-gnueabihf-thread-multi-64int
[70-01-01 01:06:52.8068] main::init (387) Starting Logitech Media Server
(v7.9.2,
here's what i see
+---+
|Filename: Cattura5.PNG |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=28460|
can't seem to install lms
Downloading LMS...
[ INFO ] Downloading: perl_common_sense.tcz
[ INFO ] Checking MD5 of: perl_common_sense.tcz.OK
[ INFO ] Downloading: perl_linux_inotify2.tcz
[ INFO ] Checking MD5 of: perl_linux_inotify2.tcz.OK
[ INFO ] Downloading:
installed display. anyway, many rebuffering problems after picoreplayer
syncronization (i had to sync it cos otherwise display didn't show music
i was listening to)
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
i notice when i come back home i'0ve to restart all the players to avoid
rebuffering issues.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
is there any chance to install album flow on pi display?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
Paul Webster wrote:
> From JiveLite interface you should be able to Choose Player to pick
> which one you want it to control (and then it will show the Now Playing
> from that other player).
yes thanks. done.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
INFO ] Downloading LMS...
[ INFO ] Downloading: perl_common_sense.tcz
[ INFO ] Checking MD5 of: perl_common_sense.tcz.OK
[ INFO ] Downloading: perl_linux_inotify2.tcz
[ INFO ] Checking MD5 of: perl_linux_inotify2.tcz.FAIL
[ ERROR ] There was a error downloading slimserver.tcz.
[ INFO ]
paul- wrote:
> The files checkout on the repo, and the US servers. I did just update
> them today, we have had some problems with our CDN cache not clearing
> worldwide, so I bumped the CDN's cache, hope that gets it.
>
> How big did you resize your SD card?
300 mb
Touchx2,radiox4,
slartibartfast wrote:
> Why so small?
>
> Sent from my SM-G900F using Tapatalk
it's written in the guide
https://www.picoreplayer.org/how_to_install_lms.shtml
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
kidstypike wrote:
> I don't know.
>
> Considering the problems to seem to have been having, I would use a
> fresh card, 8 or 16GB is ample.
go to buy 16gb sd card. in the meantime i hope servers come back. this
installation is a nightmare
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi
kidstypike wrote:
> And me. Use 2000 minimum.
ok. i'm trying to format sd with sd card formatter: it deletes all the
files but it can't start formatting (0%). with quick formatting doesn't
finish (92%). can i use that sd car anyway?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and
ok thanks. in the meantime, i've reinstalled my old dear pi3:-)
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this
is there any way to check if server are on?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
slartibartfast wrote:
> So it is. Still seems very small to me.
>
> Sent from my SM-G900F using Tapatalk
how much should i resize?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's
Paul Webster wrote:
> Don't forget to add in the extra file system support.
>
> You can also do the rest but setting static IP address can sometimes be
> troublesome. Might be easier to reserve address in your router
> (especially if you have not set a reserved range for fixed Ip
> addresses).
paul- wrote:
> Please keep a list of all the plugins that you install..you never
> gave us that list last time. One of them is likely what caused your
> problems. So install one at a time, and make sure everything is fine
> before installing the next one.
i installed spotty, youtube and
paul- wrote:
> No, you cannot follow any instructions that use Raspbian. Hardware
> connections are fine.
>
> Im sure the download problem will resolve after the weekend is done.
ok many thanks.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
paul- wrote:
> I just downloaded lms again, no problems on a Pi4 64bit. I am in the
> US. Odd, we use cloud flare cdn services. Their system status shows
> everything is fine. of course. I checked the main data server too.
>
> I've seen some DNS problems with some providers not
paul- wrote:
> Leave the screen off for now, you never used it before. Installing
> jivelite is a bit difficult to do manually.
are you going to make jivelite install available on the web interface
soon?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
paul- wrote:
> Just try occasionally from the interface to install Jivelite. The
> ability to select/change mirrors is a significant code update and will
> not be in until the the next update.
ok thanks.
any chance if i follow this?
paul- wrote:
> Leave the screen off for now, you never used it before. Installing
> jivelite is a bit difficult to do manually.
INFO ] Mount configuration changed for 192.168.1.2:/multimedia
[ INFO ] Checking new Mount Point /mnt/Music.
[ INFO ] Mounting Disk.
[INFO] mount -v -t cifs -o
ok it's gone, it is looking for mujsic.
can i install spotty, youtube and bandcamp plugins?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
kidstypike wrote:
> @nervoteso
>
> I seem to recall you ordered a Flirc case for your Pi4? I'm not sure
> how you're going to attach a 7" screen to your Pi when it's in that case
> :confused:
>
> I use a Pi4 for LMS only (top line of my signature), and a s
everything came back to work. hope it keeps.
please update me when it will be available on the interface the install
for display.
thanks for all the support
i forgot tio say you i also installed audioscrobbler plugin
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
yes it's ok. lms now is running. now what should i do, can i set static
ip and mount qnap disk?
can i also rename lms name?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
paul- wrote:
> If the filesystems doesn't download from the web interface either, you
> can grab this way
>
> >
Code:
> > pcp-load -r http://picoreplayer.sourceforge.net/tcz_repo -wi ntfs-3g.tcz
> >
i use putty to add fs support?
can i install jivelite before mounting disk?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
View this thread:
hello
just ordered pi 4 (4gb). i would like to install on it picoreplayer
6.0.0, can you tell me some guide to do that? someone told me something
about 64 bit kernel: what should i do exactly? is it not enought install
6.0.0? thanks
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and
should i install raspbian os before of can i install directly
picoreplayer on pi4?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
Man in a van wrote:
> Pop the SD card back into a card read and put the reader into a
> computer.
>
> Open the boot parttion and then open config.txt in an editor.
>
> Edit the file, save and exit.
>
> 28428
>
>
> There now appears to be only two lines to comment out, so you can either
>
Man in a van wrote:
> Pop the SD card back into a card read and put the reader into a
> computer.
>
> Open the boot parttion and then open config.txt in an editor.
>
> Edit the file, save and exit.
>
> 28428
>
>
> There now appears to be only two lines to comment out, so you can either
>
paul- wrote:
> You cannot install any apps other than what's available in LMS plugins.
> But what are you looking for, you can browse by image art.
yes browse by image, i did not find it, i try to see this evening
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
after several weeks of using, i can say lms on pi4 (picoreplayer 6.0.0)
works perfectly.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
kidstypike wrote:
> You deleted the lines? You should've edited them!
not deleted! i added! sorry i wrote bad
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
new issue: i've set ip static, save, and now i can't see picoreplayer
anymore. in the menu od pi4 says newtork not found. how to return to
dhcp? i can't see picoreplayer menu
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
new issue: i set qnap folder (network mount) "music" but no music found.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
Paul Webster wrote:
> Have a look at this recent thread to see if it helps
> https://forums.slimdevices.com/showthread.php?12-Migrating-from-LMS-on-RedyNas-to-LMS-on-PI(absolute-beginner!!!)
thanks. it seems now it is analysing music. fingers crossed
Touchx2,radiox4, Squeezebox Server
lms is working here perfectly on pi4 . very fast and no buffering!
where should i put heatsink i found in the pi4 box? is it necessary?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's
edited config, i plugged pi4 power, hdmi and ethernet, but it doesn't
work anything. i just see a colored image. can't see any ip in the
network. i'ven't formatgted sd, should have i formatted?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
paul- wrote:
> You will need to use a keyboard and monitor.
>
> When booting is done, you can run setup and switch it back to dhcp.
>
> It seems the reboot box is popped up too early. Make sure you cancel
> the first time..I'll have to fix that. (There is a reason that
> Static IP
paul- wrote:
> I have published a new beta
> image.https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0-b4.zip
>
> See info in the
> OP...https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support=944664=1#post944664
>
> For only the pi4, I
1 - 100 of 113 matches
Mail list logo