Greg Erskine wrote:
> hi pavowren,
>
> I suppose if this was a requirement for pCP we would just write a script
> that would save each of the jivelite configuration settings, and a
> restore the appropriate one.
>
> At the moment, I think, we just give the user the opportunity to remove
> the
hi pavowren,
I suppose if this was a requirement for pCP we would just write a script
that would save each of the jivelite configuration settings, and a
restore the appropriate one.
At the moment, I think, we just give the user the opportunity to remove
the offending configuration and get them
Greg Erskine wrote:
> I don't think pavowren is using pCP? :confused:
right.
at this time, my pi is running raspian 9 stretch.
is there no other way to 'reset' other than reinstall?
pavowren's Profile:
paul- wrote:
> There is a reset button in the pCP web interface..on the tweaks
> page.
I don't think pavowren is using pCP? :confused:
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
There is a reset button in the pCP web interface..on the tweaks
page.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
wtnh wrote:
> I had the exact same scenario. I had everything working with LMS and PcP
> 3.2 on the same RPi with wired ethernet. Then I managed to get wifi
> working with an EDUP dongle, removed the wired connection, and then
> jivelite refused to connect the picoreplayer to LMS. LMS and
>
paul- wrote:
> I always have problems when installing jivelite over a wired connection
> and then moving to wifi. In later versions of pCP, there is an option
> to reset jivelite via the pCP web interface.
I had the exact same scenario. I had everything working with LMS and PcP
3.2 on the
meercat wrote:
> Just to say that my (freshly built 3.01) piCorePlayer on a new Pi v3
> could be controlled from elsewhere, but JiveLite couldn't connect to LMS
> when it was connected via wifi after having installed JiveLite over a
> wired connection.
> I'd uninstalled and reinstalled a few
Just to say that my (freshly built 3.01) piCorePlayer on a new Pi v3
could be controlled from elsewhere, but JiveLite couldn't connect to LMS
when it was connected via wifi after having installed JiveLite over a
wired connection.
I'd uninstalled and reinstalled a few times and still no joy - it
I had the same issue after uprading from a raspberry pi2 to a pi3. My
rasbian image with squeezelite & jivelite worked well on the pi2.
After upgrading my image on the pi2 and putting the sd card in the pi3
afterwards, Jivelite failed to connect to the LMS. As ralphy mentioned,
it helped to
ralphy wrote:
> I use jivelite exclusively over wifi with piCorePlayer, 7" screen, RPI
> 2B, R8712U dongle.
>
> I can switch between wired and wifi with a reboot and jivelite connects
> every time either medium.
>
> Try booting with wifi, quit jivelite, delete $HOME/.jivelite, may not be
> the
raymondhthomas wrote:
> Is anyone using jivelite over wifi successfully?
>
> > > >
- Raspberry Pi 2 B+
- Official 7" touch display
- latest version of max2play
- GMYLE RTL8192CU wifi dongle
> > >
I use jivelite exclusively over wifi with piCorePlayer, 7" screen, RPI
2B, R8712U
Hi Grant,
Uninstall jivelite.
Ensure wifi is working on piCorePlayer.
Ensure Ethernet cable is removed.
Reboot using only wifi.
Install jivelite.
See how that goes.
I am sure we would have heard if there was a major issue with jivelite
over wifi.
regards
Greg
I have this same problem. I'm using max2play and jivelite times out over
wifi but connects over ethernet. To make matters stranger, squeezelite
connects fine over wifi so I get audio, just not the jivelite interface.
Also if I start jivelite with ethernet plugged in and then remove the
cable it
14 matches
Mail list logo
