Re: iOS 13.2 - play soundFile [looping] - "dead"

2019-11-07 Thread Bob Sneidar via use-livecode 
Rush Limbaugh made a big deal about telling his users of his app to NOT 
download and install iOS 13 until they installed the new App, which had the fix 
for the sound issue. 

Bob S


> On Nov 7, 2019, at 13:22 , Sannyasin Brahmanathaswami via use-livecode 
>  wrote:
> 
> You probably already know this, or not...
> 
> 
> 
> But if you did not realize it, Apple's switch of the deep code for "audio" on 
> iOS for media has broken the
> 
> 
> 
> play soundFile [looping]
> 
> 
> 
> I haven't used it, except as an "award" on completion of rounds of practice 
> for an exercise.
> 
> So, if user gets "Bingo, you did it!" with no sound, it's not a critical 
> issue.
> 
> 
> 
> Fortunately, I am behind on a plan to use "play soundFile [looping]" all over 
> the place! If I had, the app would be seriously broken by Apple's recent 
> penchant for rapid, (broken?) innovation that leaves of us with gaping holes 
> in the side...
> 
> 
> 
> Sacrificing a Coconut and Fresh Pineapple in rite to help the Gods of HQs to 
> get us
> 
> 
> 
> "9.6 - the first dp of which will appear shortly." Panos, Nov 1
> 
> 
> 
> BR


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Time Saver's Toolbox v0.99 Release

2019-11-07 Thread Tom Glod via use-livecode 
Hey Rick, thanks for the feedback.

I am not great at understanding sound so I assumed that it would be a
similar experience for all viewers as far as the levels are concerned.  i
put it at -32 db, which was the lowest level possible while being audible.
-33 db you could not hear it.

Here is a link to the video with no music, https://youtu.be/YF7F3MujcBM

:)

On Thu, Nov 7, 2019 at 3:02 PM Rick Harrison via use-livecode <
use-livecode@lists.runrev.com> wrote:

> Hi Tom,
>
> I just took a quick look at your website.
>
> I started to try to watch your demo video
> and gave up almost immediately.  You have
> too much music going on in the background
> (almost foreground) and it is way too distracting
> for me to be able to concentrate on the features
> you are trying to show off.  Other users may
> have a similar experience, and you don’t
> want to lose your audience.
>
> Suggestion; have only a little bit of music
> at the beginning and then fade it out. Then
> your visitors will be able to concentrate on
> what you are trying to show them. If you really
> want it back again, you can fade it back in
> at the very end of the video.
>
> Nice work from what little I saw.
> Let me know if you re-edit the
> music out of most of your video
> and I will visit your website again.
>
> Good luck!
>
> Rick
>
> > On Nov 7, 2019, at 8:27 AM, Tom Glod via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> >
> > Dear Livecode Users,
> >
> > Today I am proud to announce the public release of the Time Saver's
> Toolbox.
> >
> > The Toolbox is a productivity tool/utility window containing several
> > time-saving tools for those who use their computer for multiple hours a
> day.
> >
> > Clipboard Manager
> > Content Library
> > Text To Speech Reader
> > Color Palette
> > Hotkey Scripts
> > Emoji Picker
> > Browser Array
> > Quick Composer
> >
> > The toolbox is also a platform on which many other tools can be built.
> > There are 4 or 5 other tools in production that didn't make it into this
> > 1st release.
> >
> > To learn more about it, please visit www.timesaverstoolbox.com
> >
> > There is a 30 day trial available, I have a special 20% off coupon code
> for
> > all Livecode Users: 'ThankYouLivecode' (Expires December 1, 2019)
> >
> >
> ---
> > About the Codebase
> >
> ---
> >
> > It took me 489 days to build it.
> > Its about 15k - 20k lines of code
> >
> > I am contemplating releasing the codebase (minus some of the tools) as
> open
> > source.  But if I do, it will be with a future release after I am able to
> > document the code a little more, and split some of the code into script
> > only stacks.
> >
> > Thank you to Livecode Inc. for the great engine that made this possible
> for
> > me.
> > Thank you to this community that has helped me solve some of the problems
> > along the way.
> >
> > If anyone would like to use this codebase to build a custom project,
> please
> > contact me personally.
> >
> > Sincerely,
> > --
> > Tom Glod
> > Founder & Developer
> > MakeShyft R.D.A (www.makeshyft.com)
> > Office:226-706-9339
> > Mobile:226-706-9793
> > ___
> > use-livecode mailing list
> > use-livecode@lists.runrev.com
> > Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> > http://lists.runrev.com/mailman/listinfo/use-livecode
>
>
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
>


-- 
Tom Glod
Founder & Developer
MakeShyft R.D.A (www.makeshyft.com)
Office:226-706-9339
Mobile:226-706-9793
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

iOS 13.2 - play soundFile [looping] - "dead"

2019-11-07 Thread Sannyasin Brahmanathaswami via use-livecode 
You probably already know this, or not...



But if you did not realize it, Apple's switch of the deep code for "audio" on 
iOS for media has broken the



play soundFile [looping]



I haven't used it, except as an "award" on completion of rounds of practice for 
an exercise.

So, if user gets "Bingo, you did it!" with no sound, it's not a critical issue.



Fortunately, I am behind on a plan to use "play soundFile [looping]" all over 
the place! If I had, the app would be seriously broken by Apple's recent 
penchant for rapid, (broken?) innovation that leaves of us with gaping holes in 
the side...



Sacrificing a Coconut and Fresh Pineapple in rite to help the Gods of HQs to 
get us



"9.6 - the first dp of which will appear shortly." Panos, Nov 1



BR










___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Time Saver's Toolbox v0.99 Release

2019-11-07 Thread Rick Harrison via use-livecode 
Hi Tom,

I just took a quick look at your website.

I started to try to watch your demo video
and gave up almost immediately.  You have
too much music going on in the background
(almost foreground) and it is way too distracting 
for me to be able to concentrate on the features 
you are trying to show off.  Other users may
have a similar experience, and you don’t
want to lose your audience.

Suggestion; have only a little bit of music
at the beginning and then fade it out. Then
your visitors will be able to concentrate on 
what you are trying to show them. If you really 
want it back again, you can fade it back in 
at the very end of the video.

Nice work from what little I saw.
Let me know if you re-edit the
music out of most of your video
and I will visit your website again.

Good luck!

Rick

> On Nov 7, 2019, at 8:27 AM, Tom Glod via use-livecode 
>  wrote:
> 
> Dear Livecode Users,
> 
> Today I am proud to announce the public release of the Time Saver's Toolbox.
> 
> The Toolbox is a productivity tool/utility window containing several
> time-saving tools for those who use their computer for multiple hours a day.
> 
> Clipboard Manager
> Content Library
> Text To Speech Reader
> Color Palette
> Hotkey Scripts
> Emoji Picker
> Browser Array
> Quick Composer
> 
> The toolbox is also a platform on which many other tools can be built.
> There are 4 or 5 other tools in production that didn't make it into this
> 1st release.
> 
> To learn more about it, please visit www.timesaverstoolbox.com
> 
> There is a 30 day trial available, I have a special 20% off coupon code for
> all Livecode Users: 'ThankYouLivecode' (Expires December 1, 2019)
> 
> ---
> About the Codebase
> ---
> 
> It took me 489 days to build it.
> Its about 15k - 20k lines of code
> 
> I am contemplating releasing the codebase (minus some of the tools) as open
> source.  But if I do, it will be with a future release after I am able to
> document the code a little more, and split some of the code into script
> only stacks.
> 
> Thank you to Livecode Inc. for the great engine that made this possible for
> me.
> Thank you to this community that has helped me solve some of the problems
> along the way.
> 
> If anyone would like to use this codebase to build a custom project, please
> contact me personally.
> 
> Sincerely,
> -- 
> Tom Glod
> Founder & Developer
> MakeShyft R.D.A (www.makeshyft.com)
> Office:226-706-9339
> Mobile:226-706-9793
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: checking the list is here

2019-11-07 Thread doc hawk via use-livecode 

On Nov 7, 2019, at 1:29 AM, Heather Laine via use-livecode 
 wrote:
> 
> No need to respond…


Hmm, a conspiracy of silence.

Indeed, a coverup,.

:)



___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Klaus major-k via use-livecode 


> Am 07.11.2019 um 15:12 schrieb Pi Digital via use-livecode 
> :
> 
> But with a c at the beginning ;)

Conaudampfschifffahrtsgesellschaftkapitänschlüsselloch? 
Come on! :-D

> Hehe, you guys :D

Germans...

> Sean Cole
> Pi Digital Prod Ltd

Best

Klaus

--
Klaus Major
https://www.major-k.de
kl...@major-k.de


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Pi Digital via use-livecode 
But with a c at the beginning ;)
Hehe, you guys :D

Sean Cole
Pi Digital Prod Ltd

> On 7 Nov 2019, at 14:01, hh via use-livecode  
> wrote:
> 
> Klaus, a better property name would be
> Donaudampfschifffahrtsgesellschaftkapitänskajütenschlüsselloch ;-)
> 
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Klaus major-k via use-livecode 
Hallo Hermann,

> Am 07.11.2019 um 15:01 schrieb hh via use-livecode 
> :
> 
> Klaus, a better property name would be
> Donaudampfschifffahrtsgesellschaftkapitänskajütenschlüsselloch ;-)

LOL! :-D

I only knew the shorter "Donaudampfschifffahrtsgesellschaftkapitänsmütze" so 
far.
Good idea in general, but not meaningful enough for my project. ;-)


Best

Klaus

--
Klaus Major
https://www.major-k.de
kl...@major-k.de


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread hh via use-livecode 
Klaus, a better property name would be
Donaudampfschifffahrtsgesellschaftkapitänskajütenschlüsselloch ;-)


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Time Saver's Toolbox v0.99 Release

2019-11-07 Thread Matthias Rebbe via use-livecode 
Congrats, Tom.

Couldn´t resist to buy the LifetimeLicense. ;)

Regards,
Matthias

Matthias Rebbe

free tools for Livecoders:
InstaMaker 
WinSignMaker Mac 

> Am 07.11.2019 um 14:27 schrieb Tom Glod via use-livecode 
> mailto:use-livecode@lists.runrev.com>>:
> 
> Dear Livecode Users,
> 
> Today I am proud to announce the public release of the Time Saver's Toolbox.
> 
> The Toolbox is a productivity tool/utility window containing several
> time-saving tools for those who use their computer for multiple hours a day.
> 
> Clipboard Manager
> Content Library
> Text To Speech Reader
> Color Palette
> Hotkey Scripts
> Emoji Picker
> Browser Array
> Quick Composer
> 
> The toolbox is also a platform on which many other tools can be built.
> There are 4 or 5 other tools in production that didn't make it into this
> 1st release.
> 
> To learn more about it, please visit www.timesaverstoolbox.com 
> 
> 
> There is a 30 day trial available, I have a special 20% off coupon code for
> all Livecode Users: 'ThankYouLivecode' (Expires December 1, 2019)
> 
> ---
> About the Codebase
> ---
> 
> It took me 489 days to build it.
> Its about 15k - 20k lines of code
> 
> I am contemplating releasing the codebase (minus some of the tools) as open
> source.  But if I do, it will be with a future release after I am able to
> document the code a little more, and split some of the code into script
> only stacks.
> 
> Thank you to Livecode Inc. for the great engine that made this possible for
> me.
> Thank you to this community that has helped me solve some of the problems
> along the way.
> 
> If anyone would like to use this codebase to build a custom project, please
> contact me personally.
> 
> Sincerely,
> -- 
> Tom Glod
> Founder & Developer
> MakeShyft R.D.A (www.makeshyft.com )
> Office:226-706-9339
> Mobile:226-706-9793
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com 
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Klaus major-k via use-livecode 
Hi Sean,

> Am 07.11.2019 um 14:33 schrieb Pi Digital via use-livecode 
> :
> 
> Sorry, not + but &. 

oops, sorry.

Ah yes, makes sense, this forces the result to be a STRING.

A clever trick and really new to me (after using LC and its ancestors 
for 20 years now), thank you very much! :-)

>> Put tNextNr & “” into cLetzteLaufendeNummer
> Sean Cole

Best

Klaus

--
Klaus Major
https://www.major-k.de
kl...@major-k.de


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Pi Digital via use-livecode 
Sorry, not + but &. 

> Put tNextNr & “” into cLetzteLaufendeNummer

Sean Cole
Pi Digital Prod Ltd

> On 7 Nov 2019, at 13:29, Pi Digital via use-livecode 
>  wrote:
> 
> Hi Klaus
> 
> Had a similar issue. To overcome I just added “” afterward. Sounds 
> counterintuitive but worked. So:
> 
> Put tNextNr + “” into cLetzteLaufendeNummer
> 
> Sean Cole
> Pi Digital Prod Ltd
> 
>> On 7 Nov 2019, at 13:19, Klaus major-k via use-livecode 
>>  wrote:
>> 
>> Bonjour Thierry,
>> 
 Am 07.11.2019 um 14:09 schrieb Thierry Douez via use-livecode 
 :
>>> 
>>> Hallo Klaus,
>>> 
>>> Umm, thinking loudly, I would say numberformat has a local scope ...
>> 
>> ah, that was what I was missing, merci, mon ami!
>> 
>> But see below...
>> 
>> function fNextNr
>> set the numberformat to 
>> put the cLetzteLaufendeNummer of this stack into tNextNr
>> if tNextNr = EMPTY then
>>put 1 + 0 into tNewNext
>> else
>>put tNextNr + 1 into tNewNext
>> end if
>> ## !!
>> ## However this line IS Inside of the local cope of numberformat
>> set the cLetzteLaufendeNummer of this stack to tNewNext
>> ## !!
>> return tNewNext
>> end fNextNr
>> 
>> So -> the cLetzteLaufendeNummer of this stack should result in e.g. 0003 but 
>> is in fact 3?
>> At least this is shown in the Custom Property departement of the inspector 
>> for my stack.
>> 
>> Hm, it is getting even stranger, maybe I just don't get it? :-D
>> This:
>> ...
>> put the cLetzteLaufendeNummer of this stack
>> ...
>> -> 3
>> 
>> But this:
>> ...
>> set the numberformat to 
>> put the cLetzteLaufendeNummer of this stack
>> ...
>> -> 0003
>> 
>> No arithmetic operation involved!?
>> 
>>> Regards,
>>> 
>>> Thierry
>> 
>> Best
>> 
>> Klaus
>> 
>> --
>> Klaus Major
>> https://www.major-k.de
>> kl...@major-k.de
>> 
>> 
>> ___
>> use-livecode mailing list
>> use-livecode@lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your subscription 
>> preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Klaus major-k via use-livecode 
Hi Sean,

> Am 07.11.2019 um 14:28 schrieb Pi Digital via use-livecode 
> :
> 
> Hi Klaus
> 
> Had a similar issue. To overcome I just added “” afterward. Sounds 
> counterintuitive but worked. So:
> Put tNextNr + “” into cLetzteLaufendeNummer

so this does not count obviously:
...
if tNextNr = EMPTY then
   put 1 + 0 into tNewNext
else
   put tNextNr + 1 into tNewNext
end if
set the cLetzteLaufendeNummer of this stack to tNewNext
...

This IS in fact a bit puzzling, but I get along now, thanks. :-)

> Sean Cole

Best

Klaus

--
Klaus Major
https://www.major-k.de
kl...@major-k.de


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Klaus major-k via use-livecode 
Hi Brian,

> Am 07.11.2019 um 14:21 schrieb Brian Milby via use-livecode 
> :
> 
> You are saving a number and not a string.  

aha, thanks, that makes it clearer!

> Numberformat governs how a number is displayed as a string doesn’t it?

No idea, you are the LC Pro, does it? 8-)

> Thanks,
> Brian
> On Nov 7, 2019, 8:19 AM -0500, Klaus major-k via use-livecode 
> , wrote:
>> Bonjour Thierry,
>> 
>>> Am 07.11.2019 um 14:09 schrieb Thierry Douez via use-livecode 
>>> :
>>> 
>>> Hallo Klaus,
>>> 
>>> Umm, thinking loudly, I would say numberformat has a local scope ...
>> 
>> ah, that was what I was missing, merci, mon ami!
>> 
>> But see below...
>> 
>> function fNextNr
>> set the numberformat to 
>> put the cLetzteLaufendeNummer of this stack into tNextNr
>> if tNextNr = EMPTY then
>> put 1 + 0 into tNewNext
>> else
>> put tNextNr + 1 into tNewNext
>> end if
>> ## !!
>> ## However this line IS Inside of the local cope of numberformat
>> set the cLetzteLaufendeNummer of this stack to tNewNext
>> ## !!
>> return tNewNext
>> end fNextNr
>> 
>> So -> the cLetzteLaufendeNummer of this stack should result in e.g. 0003 but 
>> is in fact 3?
>> At least this is shown in the Custom Property departement of the inspector 
>> for my stack.
>> 
>> Hm, it is getting even stranger, maybe I just don't get it? :-D
>> This:
>> ...
>> put the cLetzteLaufendeNummer of this stack
>> ...
>> -> 3
>> 
>> But this:
>> ...
>> set the numberformat to 
>> put the cLetzteLaufendeNummer of this stack
>> ...
>> -> 0003
>> 
>> No arithmetic operation involved!?

Best

Klaus

--
Klaus Major
https://www.major-k.de
kl...@major-k.de


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Pi Digital via use-livecode 
Hi Klaus

Had a similar issue. To overcome I just added “” afterward. Sounds 
counterintuitive but worked. So:

Put tNextNr + “” into cLetzteLaufendeNummer

Sean Cole
Pi Digital Prod Ltd

> On 7 Nov 2019, at 13:19, Klaus major-k via use-livecode 
>  wrote:
> 
> Bonjour Thierry,
> 
>> Am 07.11.2019 um 14:09 schrieb Thierry Douez via use-livecode 
>> :
>> 
>> Hallo Klaus,
>> 
>> Umm, thinking loudly, I would say numberformat has a local scope ...
> 
> ah, that was what I was missing, merci, mon ami!
> 
> But see below...
> 
> function fNextNr
> set the numberformat to 
> put the cLetzteLaufendeNummer of this stack into tNextNr
> if tNextNr = EMPTY then
> put 1 + 0 into tNewNext
> else
> put tNextNr + 1 into tNewNext
> end if
> ## !!
> ## However this line IS Inside of the local cope of numberformat
> set the cLetzteLaufendeNummer of this stack to tNewNext
> ## !!
> return tNewNext
> end fNextNr
> 
> So -> the cLetzteLaufendeNummer of this stack should result in e.g. 0003 but 
> is in fact 3?
> At least this is shown in the Custom Property departement of the inspector 
> for my stack.
> 
> Hm, it is getting even stranger, maybe I just don't get it? :-D
> This:
> ...
> put the cLetzteLaufendeNummer of this stack
> ...
> -> 3
> 
> But this:
> ...
> set the numberformat to 
> put the cLetzteLaufendeNummer of this stack
> ...
> -> 0003
> 
> No arithmetic operation involved!?
> 
>> Regards,
>> 
>> Thierry
> 
> Best
> 
> Klaus
> 
> --
> Klaus Major
> https://www.major-k.de
> kl...@major-k.de
> 
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Time Saver's Toolbox v0.99 Release

2019-11-07 Thread Tom Glod via use-livecode 
Dear Livecode Users,

Today I am proud to announce the public release of the Time Saver's Toolbox.

The Toolbox is a productivity tool/utility window containing several
time-saving tools for those who use their computer for multiple hours a day.

Clipboard Manager
Content Library
Text To Speech Reader
Color Palette
Hotkey Scripts
Emoji Picker
Browser Array
Quick Composer

The toolbox is also a platform on which many other tools can be built.
There are 4 or 5 other tools in production that didn't make it into this
1st release.

To learn more about it, please visit www.timesaverstoolbox.com

There is a 30 day trial available, I have a special 20% off coupon code for
all Livecode Users: 'ThankYouLivecode' (Expires December 1, 2019)

---
About the Codebase
---

It took me 489 days to build it.
Its about 15k - 20k lines of code

I am contemplating releasing the codebase (minus some of the tools) as open
source.  But if I do, it will be with a future release after I am able to
document the code a little more, and split some of the code into script
only stacks.

Thank you to Livecode Inc. for the great engine that made this possible for
me.
Thank you to this community that has helped me solve some of the problems
along the way.

If anyone would like to use this codebase to build a custom project, please
contact me personally.

Sincerely,
-- 
Tom Glod
Founder & Developer
MakeShyft R.D.A (www.makeshyft.com)
Office:226-706-9339
Mobile:226-706-9793
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Brian Milby via use-livecode 
You are saving a number and not a string.  Numberformat governs how a number is 
displayed as a string doesn’t it?

Thanks,
Brian
On Nov 7, 2019, 8:19 AM -0500, Klaus major-k via use-livecode 
, wrote:
> Bonjour Thierry,
>
> > Am 07.11.2019 um 14:09 schrieb Thierry Douez via use-livecode 
> > :
> >
> > Hallo Klaus,
> >
> > Umm, thinking loudly, I would say numberformat has a local scope ...
>
> ah, that was what I was missing, merci, mon ami!
>
> But see below...
>
> function fNextNr
> set the numberformat to 
> put the cLetzteLaufendeNummer of this stack into tNextNr
> if tNextNr = EMPTY then
> put 1 + 0 into tNewNext
> else
> put tNextNr + 1 into tNewNext
> end if
> ## !!
> ## However this line IS Inside of the local cope of numberformat
> set the cLetzteLaufendeNummer of this stack to tNewNext
> ## !!
> return tNewNext
> end fNextNr
>
> So -> the cLetzteLaufendeNummer of this stack should result in e.g. 0003 but 
> is in fact 3?
> At least this is shown in the Custom Property departement of the inspector 
> for my stack.
>
> Hm, it is getting even stranger, maybe I just don't get it? :-D
> This:
> ...
> put the cLetzteLaufendeNummer of this stack
> ...
> -> 3
>
> But this:
> ...
> set the numberformat to 
> put the cLetzteLaufendeNummer of this stack
> ...
> -> 0003
>
> No arithmetic operation involved!?
>
> > Regards,
> >
> > Thierry
>
> Best
>
> Klaus
>
> --
> Klaus Major
> https://www.major-k.de
> kl...@major-k.de
>
>
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Klaus major-k via use-livecode 
Bonjour Thierry,

> Am 07.11.2019 um 14:09 schrieb Thierry Douez via use-livecode 
> :
> 
> Hallo Klaus,
> 
> Umm, thinking loudly, I would say numberformat has a local scope ...

ah, that was what I was missing, merci, mon ami!

But see below...

function fNextNr
 set the numberformat to 
 put the cLetzteLaufendeNummer of this stack into tNextNr
 if tNextNr = EMPTY then
 put 1 + 0 into tNewNext
 else
 put tNextNr + 1 into tNewNext
 end if
 ## !!
 ## However this line IS Inside of the local cope of numberformat
 set the cLetzteLaufendeNummer of this stack to tNewNext
 ## !!
 return tNewNext
end fNextNr

So -> the cLetzteLaufendeNummer of this stack should result in e.g. 0003 but is 
in fact 3?
At least this is shown in the Custom Property departement of the inspector for 
my stack.

Hm, it is getting even stranger, maybe I just don't get it? :-D
This:
...
put the cLetzteLaufendeNummer of this stack
...
-> 3

But this:
...
set the numberformat to 
put the cLetzteLaufendeNummer of this stack
...
-> 0003

No arithmetic operation involved!?

> Regards,
> 
> Thierry

Best

Klaus

--
Klaus Major
https://www.major-k.de
kl...@major-k.de


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: numberformat woes?

2019-11-07 Thread Thierry Douez via use-livecode 
Hallo Klaus,

Umm, thinking loudly, I would say numberformat has a local scope ...


Regards,

Thierry

What am I missing?
>
> Klaus

-- 

Thierry Douez - sunny-tdz.com
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

numberformat woes?

2019-11-07 Thread Klaus major-k via use-livecode 
Hi friends,

this snippet:
...
set the numberformat to 
put EMPTY into tNextNr
if tNextNr = EMPTY then
  put 1 + 0 into tNewNext
else
  put tNextNr + 1 into tNewNext
end if
put tNewNext
...
-> 0001

However if I put this into a function:
function fNextNr
  set the numberformat to 
  put the cLetzteLaufendeNummer of this stack into tNextNr
  if tNextNr = EMPTY then
  put 1 + 0 into tNewNext
  else
  put tNextNr + 1 into tNewNext
  end if
  set the cLetzteLaufendeNummer of this stack to tNewNext
  return tNewNext
end fNextNr

tNewNext = 1 (If tNextNr = EMPTY, resp 2,3,4..., if not)?

What am I missing? 
LC 9.5, macOS 10.14.6

Thanks a lot in advance!


Best

Klaus
--
Klaus Major
https://www.major-k.de
kl...@major-k.de


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

AW: Indy 9.5.0. Apple can't search for malware in LC Indy?

2019-11-07 Thread Tiemo Hollmann TB via use-livecode 
The weird thing was, that this message was different as others related to
not signed apps, telling it couldn't search for malware in the LC app...
That puzzled me.

In the security settings I had the setting "appStore & trusted developers"
(or so), but that was not enough. I had to add LC Indy to the white list
"open anyway". The clue was, that I had to open first the security system
settings – then start LC – and only then Apple asks me in the open system
settings window, if I want to add this app to the “open anyway” list.
Otherwise it won’t show you any window or choice to answer this option.

Tiemo

-Ursprüngliche Nachricht-
Von: use-livecode [mailto:use-livecode-boun...@lists.runrev.com] Im Auftrag
von Tiemo Hollmann TB via use-livecode
Gesendet: Dienstag, 5. November 2019 11:02
An: use-livecode@lists.runrev.com
Cc: Tiemo Hollmann TB 
Betreff: Indy 9.5.0. Apple can't search for malware in LC Indy?

Hello,

 

I just installed LC Indy 9.5.0. on MacOS 10.15 Catalina

 

I can't start LC Indy. My Mac tells me:

"LiveCode Indy 9.5.0 can't be opened, because Apple can't search for malware
in this app." This software has to be updated.

 

Probably this was already a question on this list, but I couldn't find the
answer, what I have to do.

 

Thank you

 

Tiemo

 

 

 

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Test

2019-11-07 Thread Heather Laine via use-livecode 
Not your fault, apparently cpanel updated automatically and broke mailman. 
Fixed now, apologies for the inconvenience.

Regards,

Heather


Heather Laine
Customer Services Manager
LiveCode Ltd
www.livecode.com



> On 7 Nov 2019, at 09:29, Tiemo Hollmann TB via use-livecode 
>  wrote:
> 
> Hello,
> 
> 
> 
> when answering on a post on this list, my answer is rejected with the
> following error:
> 
> 
> 
>  pipe to |/usr/local/cpanel/3rdparty/mailman/mail/mailman post use-livecode
> 
>generated by  
> use-livecode@lists.runrev.com
> 
>local delivery failed
> 
> 
> 
> what worked fine in the past.
> 
> 
> 
> anybody knows, whats the difference to a new post? And what I have to change
> to be able to answer a post?
> 
> 
> 
> Tiemo
> 
> 
> 
> 
> 
> 
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Test

2019-11-07 Thread Tiemo Hollmann TB via use-livecode 
Hello,

 

when answering on a post on this list, my answer is rejected with the
following error:

 

  pipe to |/usr/local/cpanel/3rdparty/mailman/mail/mailman post use-livecode

generated by  
use-livecode@lists.runrev.com

local delivery failed

 

what worked fine in the past.

 

anybody knows, whats the difference to a new post? And what I have to change
to be able to answer a post?

 

Tiemo

 

 

 

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

checking the list is here

2019-11-07 Thread Heather Laine via use-livecode 
No need to respond...


Heather Laine
Customer Services Manager
LiveCode Ltd
www.livecode.com




___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode