Re: Move command on iOS

2018-08-04 Thread J. Landman Gay via use-livecode
I did leave the group set to dynamic, actually. When I'm done tinkering 
with rotation adjustments I'll see if that helps. Thanks.


On 8/4/18 4:06 PM, Randy Hengst via use-livecode wrote:

Did you leave the controls on dynamic? I found leaving them at static helped.

be well,
randy
www.classroomFocusedSoftware.com


On Aug 4, 2018, at 3:00 PM, J. Landman Gay via use-livecode 
 wrote:

I did tinker with accleratedRendering when the problem first appeared. I turned 
it off before the move command and back on afterward, but it didn't help. I 
also changed the time so that the move was slower, but that didn't work either.

Panos seems to have identified the reason for the failure in my case, though I'm not 
sure it is applicable everywhere. It's posted in the bug report 
<https://quality.livecode.com/show_bug.cgi?id=21461>. Would this situation 
apply to your stack(s)?

I don't quite know why my stack ran okay on Monte's phone, and my stripped-down 
test with the same code ran okay in the simulator, but my real stack failed. 
Weird.


On 8/4/18 8:07 AM, Randy Hengst via use-livecode wrote:
Sorry I’m a bit late to this strand, but yes, I’ve seen what you’re describing 
Jacque. I’ve seen it in the simulator and when loaded on the iPad.
Have you tried turning off acceleratedRendering and setting to static? As I 
shared earlier with the list, the problem I’m seeing includes slowdowns of the 
movements.
I’ve read on in the strand… and I’m using move to …. without waiting. The move 
for me always includes two buttons… sometimes five depending on the context of 
the call.
I was also seeing some issues with the acceleratedRendering/dynamic in the IDE.
be well,
randy
www.classroomFocusedSoftware.com

On Aug 3, 2018, at 4:53 PM, J. Landman Gay via use-livecode 
 wrote:

Anyone else having trouble with the move command on iOS? I'm sliding a group 
into view, which works the first time, and after that it starts to move and 
then immediately jumps to its destination without any animation. It works fine 
in the IDE.

AccleratedRendering is true and the group layermode is "dynamic". I don't have 
an actual phone to try it on, so maybe this is a simulator problem?

--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode



--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode




--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-04 Thread J. Landman Gay via use-livecode

On 8/4/18 5:11 PM, Monte Goulding via use-livecode wrote:

So I guess ensuring it is positioned correctly for the device before the first 
move and the hide move hides the whole thing would be a good place to start.


I saw that, just fixed it today. This stack was made 6 years ago before 
we had fullscreenMode and rather than re-doing all the layouts to 
accomodate, I'm manually placing everything (my god I wish we'd had that 
earlier, half the scripts deal with placement, text size and height, and 
rotation.) I missed that one.


But the fact that in spite of the initial bad placement the group still 
animated correctly makes me wonder what's different.


--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


Re: Move command on iOS

2018-08-04 Thread Monte Goulding via use-livecode



> On 5 Aug 2018, at 5:00 am, J. Landman Gay via use-livecode 
>  wrote:
> 
> I don't quite know why my stack ran okay on Monte's phone, and my 
> stripped-down test with the same code ran okay in the simulator, but my real 
> stack failed. Weird.

When I said it worked ok here I should have probably been a bit more specific. 
It seemed to work as scripted. I tested on a mini. The first move the group 
came up on an angle from bottom left. Cancel would move it straight down about 
half way then hide it. Presenting it again moved it straight up. Cancel again 
moved it straight down and hid.

So I guess ensuring it is positioned correctly for the device before the first 
move and the hide move hides the whole thing would be a good place to start.

Cheers

Monte
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


Re: Move command on iOS

2018-08-04 Thread Randy Hengst via use-livecode
Did you leave the controls on dynamic? I found leaving them at static helped. 

be well,
randy
www.classroomFocusedSoftware.com

> On Aug 4, 2018, at 3:00 PM, J. Landman Gay via use-livecode 
>  wrote:
> 
> I did tinker with accleratedRendering when the problem first appeared. I 
> turned it off before the move command and back on afterward, but it didn't 
> help. I also changed the time so that the move was slower, but that didn't 
> work either.
> 
> Panos seems to have identified the reason for the failure in my case, though 
> I'm not sure it is applicable everywhere. It's posted in the bug report 
> <https://quality.livecode.com/show_bug.cgi?id=21461>. Would this situation 
> apply to your stack(s)?
> 
> I don't quite know why my stack ran okay on Monte's phone, and my 
> stripped-down test with the same code ran okay in the simulator, but my real 
> stack failed. Weird.
> 
>> On 8/4/18 8:07 AM, Randy Hengst via use-livecode wrote:
>> Sorry I’m a bit late to this strand, but yes, I’ve seen what you’re 
>> describing Jacque. I’ve seen it in the simulator and when loaded on the iPad.
>> Have you tried turning off acceleratedRendering and setting to static? As I 
>> shared earlier with the list, the problem I’m seeing includes slowdowns of 
>> the movements.
>> I’ve read on in the strand… and I’m using move to …. without waiting. The 
>> move for me always includes two buttons… sometimes five depending on the 
>> context of the call.
>> I was also seeing some issues with the acceleratedRendering/dynamic in the 
>> IDE.
>> be well,
>> randy
>> www.classroomFocusedSoftware.com
>>> On Aug 3, 2018, at 4:53 PM, J. Landman Gay via use-livecode 
>>>  wrote:
>>> 
>>> Anyone else having trouble with the move command on iOS? I'm sliding a 
>>> group into view, which works the first time, and after that it starts to 
>>> move and then immediately jumps to its destination without any animation. 
>>> It works fine in the IDE.
>>> 
>>> AccleratedRendering is true and the group layermode is "dynamic". I don't 
>>> have an actual phone to try it on, so maybe this is a simulator problem?
>>> 
>>> -- 
>>> Jacqueline Landman Gay | jac...@hyperactivesw.com
>>> HyperActive Software   | http://www.hyperactivesw.com
>>> 
>>> ___
>>> use-livecode mailing list
>>> use-livecode@lists.runrev.com
>>> Please visit this url to subscribe, unsubscribe and manage your 
>>> subscription preferences:
>>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> ___
>> use-livecode mailing list
>> use-livecode@lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your subscription 
>> preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
> 
> 
> -- 
> Jacqueline Landman Gay | jac...@hyperactivesw.com
> HyperActive Software   | http://www.hyperactivesw.com
> 
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-04 Thread J. Landman Gay via use-livecode
I did tinker with accleratedRendering when the problem first appeared. I 
turned it off before the move command and back on afterward, but it 
didn't help. I also changed the time so that the move was slower, but 
that didn't work either.


Panos seems to have identified the reason for the failure in my case, 
though I'm not sure it is applicable everywhere. It's posted in the bug 
report <https://quality.livecode.com/show_bug.cgi?id=21461>. Would this 
situation apply to your stack(s)?


I don't quite know why my stack ran okay on Monte's phone, and my 
stripped-down test with the same code ran okay in the simulator, but my 
real stack failed. Weird.


On 8/4/18 8:07 AM, Randy Hengst via use-livecode wrote:

Sorry I’m a bit late to this strand, but yes, I’ve seen what you’re describing 
Jacque. I’ve seen it in the simulator and when loaded on the iPad.

Have you tried turning off acceleratedRendering and setting to static? As I 
shared earlier with the list, the problem I’m seeing includes slowdowns of the 
movements.

I’ve read on in the strand… and I’m using move to …. without waiting. The move 
for me always includes two buttons… sometimes five depending on the context of 
the call.

I was also seeing some issues with the acceleratedRendering/dynamic in the IDE.


be well,
randy
www.classroomFocusedSoftware.com



On Aug 3, 2018, at 4:53 PM, J. Landman Gay via use-livecode 
 wrote:

Anyone else having trouble with the move command on iOS? I'm sliding a group 
into view, which works the first time, and after that it starts to move and 
then immediately jumps to its destination without any animation. It works fine 
in the IDE.

AccleratedRendering is true and the group layermode is "dynamic". I don't have 
an actual phone to try it on, so maybe this is a simulator problem?

--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode




--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-04 Thread Randy Hengst via use-livecode
Sorry I’m a bit late to this strand, but yes, I’ve seen what you’re describing 
Jacque. I’ve seen it in the simulator and when loaded on the iPad.

Have you tried turning off acceleratedRendering and setting to static? As I 
shared earlier with the list, the problem I’m seeing includes slowdowns of the 
movements.

I’ve read on in the strand… and I’m using move to …. without waiting. The move 
for me always includes two buttons… sometimes five depending on the context of 
the call.

I was also seeing some issues with the acceleratedRendering/dynamic in the IDE.


be well,
randy
www.classroomFocusedSoftware.com


> On Aug 3, 2018, at 4:53 PM, J. Landman Gay via use-livecode 
>  wrote:
> 
> Anyone else having trouble with the move command on iOS? I'm sliding a group 
> into view, which works the first time, and after that it starts to move and 
> then immediately jumps to its destination without any animation. It works 
> fine in the IDE.
> 
> AccleratedRendering is true and the group layermode is "dynamic". I don't 
> have an actual phone to try it on, so maybe this is a simulator problem?
> 
> -- 
> Jacqueline Landman Gay | jac...@hyperactivesw.com
> HyperActive Software   | http://www.hyperactivesw.com
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-04 Thread panagiotis merakos via use-livecode
Hello all,

I have added a comment to the bug report.

Best,
Panos
--

On Sat, Aug 4, 2018 at 7:53 AM, Monte Goulding via use-livecode <
use-livecode@lists.runrev.com> wrote:

> This seems to work fine here testing on a device
>
> > On 4 Aug 2018, at 2:20 pm, J. Landman Gay via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> >
> > I jumped the gun and sent a download link to both of you. But you're
> hours ahead of him so you have time to intercept. :)
> >
> > On 8/3/18 10:25 PM, Monte Goulding via use-livecode wrote:
> >> Hmm… feel free to send through to me as I’m intrigued. I will send the
> stack to Panos if I can’t figure out what is going on so he can put it
> wherever private test stacks go.
> >>> On 4 Aug 2018, at 1:05 pm, J. Landman Gay via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> >>>
> >>> Skip the test, it works fine in isolation. Bug report is here:
> >>> https://quality.livecode.com/show_bug.cgi?id=21461
> >>>
> >>> But there must be something else going on so I should send the real
> stack to either you or Panos I guess.
> >>>
> >>> On 8/3/18 9:27 PM, J. Landman Gay via use-livecode wrote:
>  Here's the relevant part of the script. There's only one "move"
> command:
>  put the long id of grp "iOSPicker" into tGrp
>  get the height of tGrp div 2
>  put the height of this cd - it into tDestV
>  show tGrp -- before updating text
>  wait 1 millisecond with messages
>  move tGrp to (item 1 of the loc of me),tDestV in 500 milliseconds
>  I put the wait command in there to see if it made any difference but
> it doesn't.
>  If the above isn't enough, it would be quicker if I could just send
> you my client's stack privately. Is that okay? I'll put in a bug report
> regardless.
>  On 8/3/18 8:27 PM, Monte Goulding via use-livecode wrote:
> > @Jacque I’ve had a look around the engine… would be interested to
> know if you are moving without waiting or not (if that makes a difference).
> >
> > It looks like the most likely cause of what you are seeing is
> multiple calls to `move` the object to a location. The second of which will
> look like the first just ended because a second move ends the first and
> then the object is already at the location. Perhaps log when you are doing
> it?
> >
> >>>
> >>>
> >>> --
> >>> Jacqueline Landman Gay | jac...@hyperactivesw.com
> >>> HyperActive Software   | http://www.hyperactivesw.com
> >>>
> >>>
> >>> ___
> >>> use-livecode mailing list
> >>> use-livecode@lists.runrev.com
> >>> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> >>> http://lists.runrev.com/mailman/listinfo/use-livecode
> >> ___
> >> use-livecode mailing list
> >> use-livecode@lists.runrev.com
> >> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> >> http://lists.runrev.com/mailman/listinfo/use-livecode
> >
> >
> > --
> > Jacqueline Landman Gay | jac...@hyperactivesw.com
> > HyperActive Software   | http://www.hyperactivesw.com
> >
> >
> > ___
> > use-livecode mailing list
> > use-livecode@lists.runrev.com
> > Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> > http://lists.runrev.com/mailman/listinfo/use-livecode
>
>
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
>
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-04 Thread Monte Goulding via use-livecode
This seems to work fine here testing on a device

> On 4 Aug 2018, at 2:20 pm, J. Landman Gay via use-livecode 
>  wrote:
> 
> I jumped the gun and sent a download link to both of you. But you're hours 
> ahead of him so you have time to intercept. :)
> 
> On 8/3/18 10:25 PM, Monte Goulding via use-livecode wrote:
>> Hmm… feel free to send through to me as I’m intrigued. I will send the stack 
>> to Panos if I can’t figure out what is going on so he can put it wherever 
>> private test stacks go.
>>> On 4 Aug 2018, at 1:05 pm, J. Landman Gay via use-livecode 
>>>  wrote:
>>> 
>>> Skip the test, it works fine in isolation. Bug report is here:
>>> https://quality.livecode.com/show_bug.cgi?id=21461
>>> 
>>> But there must be something else going on so I should send the real stack 
>>> to either you or Panos I guess.
>>> 
>>> On 8/3/18 9:27 PM, J. Landman Gay via use-livecode wrote:
 Here's the relevant part of the script. There's only one "move" command:
 put the long id of grp "iOSPicker" into tGrp
 get the height of tGrp div 2
 put the height of this cd - it into tDestV
 show tGrp -- before updating text
 wait 1 millisecond with messages
 move tGrp to (item 1 of the loc of me),tDestV in 500 milliseconds
 I put the wait command in there to see if it made any difference but it 
 doesn't.
 If the above isn't enough, it would be quicker if I could just send you my 
 client's stack privately. Is that okay? I'll put in a bug report 
 regardless.
 On 8/3/18 8:27 PM, Monte Goulding via use-livecode wrote:
> @Jacque I’ve had a look around the engine… would be interested to know if 
> you are moving without waiting or not (if that makes a difference).
> 
> It looks like the most likely cause of what you are seeing is multiple 
> calls to `move` the object to a location. The second of which will look 
> like the first just ended because a second move ends the first and then 
> the object is already at the location. Perhaps log when you are doing it?
> 
>>> 
>>> 
>>> -- 
>>> Jacqueline Landman Gay | jac...@hyperactivesw.com
>>> HyperActive Software   | http://www.hyperactivesw.com
>>> 
>>> 
>>> ___
>>> use-livecode mailing list
>>> use-livecode@lists.runrev.com
>>> Please visit this url to subscribe, unsubscribe and manage your 
>>> subscription preferences:
>>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> ___
>> use-livecode mailing list
>> use-livecode@lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your subscription 
>> preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
> 
> 
> -- 
> Jacqueline Landman Gay | jac...@hyperactivesw.com
> HyperActive Software   | http://www.hyperactivesw.com
> 
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread J. Landman Gay via use-livecode
I jumped the gun and sent a download link to both of you. But you're 
hours ahead of him so you have time to intercept. :)


On 8/3/18 10:25 PM, Monte Goulding via use-livecode wrote:

Hmm… feel free to send through to me as I’m intrigued. I will send the stack to 
Panos if I can’t figure out what is going on so he can put it wherever private 
test stacks go.


On 4 Aug 2018, at 1:05 pm, J. Landman Gay via use-livecode 
 wrote:

Skip the test, it works fine in isolation. Bug report is here:
https://quality.livecode.com/show_bug.cgi?id=21461

But there must be something else going on so I should send the real stack to 
either you or Panos I guess.

On 8/3/18 9:27 PM, J. Landman Gay via use-livecode wrote:

Here's the relevant part of the script. There's only one "move" command:
 put the long id of grp "iOSPicker" into tGrp
 get the height of tGrp div 2
 put the height of this cd - it into tDestV
 show tGrp -- before updating text
 wait 1 millisecond with messages
 move tGrp to (item 1 of the loc of me),tDestV in 500 milliseconds
I put the wait command in there to see if it made any difference but it doesn't.
If the above isn't enough, it would be quicker if I could just send you my 
client's stack privately. Is that okay? I'll put in a bug report regardless.
On 8/3/18 8:27 PM, Monte Goulding via use-livecode wrote:

@Jacque I’ve had a look around the engine… would be interested to know if you 
are moving without waiting or not (if that makes a difference).

It looks like the most likely cause of what you are seeing is multiple calls to 
`move` the object to a location. The second of which will look like the first 
just ended because a second move ends the first and then the object is already 
at the location. Perhaps log when you are doing it?




--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode



___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode




--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread Monte Goulding via use-livecode
Hmm… feel free to send through to me as I’m intrigued. I will send the stack to 
Panos if I can’t figure out what is going on so he can put it wherever private 
test stacks go.

> On 4 Aug 2018, at 1:05 pm, J. Landman Gay via use-livecode 
>  wrote:
> 
> Skip the test, it works fine in isolation. Bug report is here:
> https://quality.livecode.com/show_bug.cgi?id=21461
> 
> But there must be something else going on so I should send the real stack to 
> either you or Panos I guess.
> 
> On 8/3/18 9:27 PM, J. Landman Gay via use-livecode wrote:
>> Here's the relevant part of the script. There's only one "move" command:
>> put the long id of grp "iOSPicker" into tGrp
>> get the height of tGrp div 2
>> put the height of this cd - it into tDestV
>> show tGrp -- before updating text
>> wait 1 millisecond with messages
>> move tGrp to (item 1 of the loc of me),tDestV in 500 milliseconds
>> I put the wait command in there to see if it made any difference but it 
>> doesn't.
>> If the above isn't enough, it would be quicker if I could just send you my 
>> client's stack privately. Is that okay? I'll put in a bug report regardless.
>> On 8/3/18 8:27 PM, Monte Goulding via use-livecode wrote:
>>> @Jacque I’ve had a look around the engine… would be interested to know if 
>>> you are moving without waiting or not (if that makes a difference).
>>> 
>>> It looks like the most likely cause of what you are seeing is multiple 
>>> calls to `move` the object to a location. The second of which will look 
>>> like the first just ended because a second move ends the first and then the 
>>> object is already at the location. Perhaps log when you are doing it?
>>> 
> 
> 
> -- 
> Jacqueline Landman Gay | jac...@hyperactivesw.com
> HyperActive Software   | http://www.hyperactivesw.com
> 
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread J. Landman Gay via use-livecode

Skip the test, it works fine in isolation. Bug report is here:
https://quality.livecode.com/show_bug.cgi?id=21461

But there must be something else going on so I should send the real 
stack to either you or Panos I guess.


On 8/3/18 9:27 PM, J. Landman Gay via use-livecode wrote:

Here's the relevant part of the script. There's only one "move" command:

     put the long id of grp "iOSPicker" into tGrp
     get the height of tGrp div 2
     put the height of this cd - it into tDestV
     show tGrp -- before updating text
     wait 1 millisecond with messages
     move tGrp to (item 1 of the loc of me),tDestV in 500 milliseconds

I put the wait command in there to see if it made any difference but it 
doesn't.


If the above isn't enough, it would be quicker if I could just send you 
my client's stack privately. Is that okay? I'll put in a bug report 
regardless.



On 8/3/18 8:27 PM, Monte Goulding via use-livecode wrote:
@Jacque I’ve had a look around the engine… would be interested to know 
if you are moving without waiting or not (if that makes a difference).


It looks like the most likely cause of what you are seeing is multiple 
calls to `move` the object to a location. The second of which will 
look like the first just ended because a second move ends the first 
and then the object is already at the location. Perhaps log when you 
are doing it?








--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread J. Landman Gay via use-livecode

Here's the relevant part of the script. There's only one "move" command:

put the long id of grp "iOSPicker" into tGrp
get the height of tGrp div 2
put the height of this cd - it into tDestV
show tGrp -- before updating text
wait 1 millisecond with messages
move tGrp to (item 1 of the loc of me),tDestV in 500 milliseconds

I put the wait command in there to see if it made any difference but it 
doesn't.


If the above isn't enough, it would be quicker if I could just send you 
my client's stack privately. Is that okay? I'll put in a bug report 
regardless.



On 8/3/18 8:27 PM, Monte Goulding via use-livecode wrote:

@Jacque I’ve had a look around the engine… would be interested to know if you 
are moving without waiting or not (if that makes a difference).

It looks like the most likely cause of what you are seeing is multiple calls to 
`move` the object to a location. The second of which will look like the first 
just ended because a second move ends the first and then the object is already 
at the location. Perhaps log when you are doing it?




--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread J. Landman Gay via use-livecode
I'm not using visual effects so it probably isn't that bug. I'll put in a 
report when I can get a test stack together. The simulator I'm using is set 
up for 11.4 so the problem is in at least iOS 11 and 12 both.


--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software | http://www.hyperactivesw.com
On August 3, 2018 7:42:31 PM Monte Goulding via use-livecode 
 wrote:


@Jacque there was this one also but that is visual effects only 
https://quality.livecode.com/show_bug.cgi?id=21434 



On 4 Aug 2018, at 10:18 am, Monte Goulding via use-livecode 
 wrote:


Hmm… I patched the crash at startup when not in acceleratedRendering mode 
for iOS 12. I don’t think it will have much to do with the move command in 
acceleratedRendering mode. I did recently fix something in 
acceleratedRendering mode in a stack that had a group coming in from the 
side that was doing some relayering… Oh… it’s possibly feasible that this 
is a manifestation of the redraw issue that Brahma found with groups. Could 
someone open a report with a sample stack and I can check if it’s working...


On 4 Aug 2018, at 9:49 am, MWCM via use-livecode 
 wrote:


Are you testing in iOS 12? This is the exact problem I’m having (that Monte 
just patched today).


Sounds like it should be fixed in 9.0.1.rc2


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your 
subscription preferences:

http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your 
subscription preferences:

http://lists.runrev.com/mailman/listinfo/use-livecode





___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread Monte Goulding via use-livecode
@Jacque I’ve had a look around the engine… would be interested to know if you 
are moving without waiting or not (if that makes a difference).

It looks like the most likely cause of what you are seeing is multiple calls to 
`move` the object to a location. The second of which will look like the first 
just ended because a second move ends the first and then the object is already 
at the location. Perhaps log when you are doing it?

> On 4 Aug 2018, at 10:40 am, Monte Goulding via use-livecode 
>  wrote:
> 
> @Jacque there was this one also but that is visual effects only 
> https://quality.livecode.com/show_bug.cgi?id=21434 
> 
> 
>> On 4 Aug 2018, at 10:18 am, Monte Goulding via use-livecode 
>>  wrote:
>> 
>> Hmm… I patched the crash at startup when not in acceleratedRendering mode 
>> for iOS 12. I don’t think it will have much to do with the move command in 
>> acceleratedRendering mode. I did recently fix something in 
>> acceleratedRendering mode in a stack that had a group coming in from the 
>> side that was doing some relayering… Oh… it’s possibly feasible that this is 
>> a manifestation of the redraw issue that Brahma found with groups. Could 
>> someone open a report with a sample stack and I can check if it’s working...
>> 
>>> On 4 Aug 2018, at 9:49 am, MWCM via use-livecode 
>>>  wrote:
>>> 
>>> Are you testing in iOS 12? This is the exact problem I’m having (that Monte 
>>> just patched today). 
>>> 
>>> Sounds like it should be fixed in 9.0.1.rc2
>> 
>> ___
>> use-livecode mailing list
>> use-livecode@lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your subscription 
>> preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread Monte Goulding via use-livecode
@Jacque there was this one also but that is visual effects only 
https://quality.livecode.com/show_bug.cgi?id=21434 


> On 4 Aug 2018, at 10:18 am, Monte Goulding via use-livecode 
>  wrote:
> 
> Hmm… I patched the crash at startup when not in acceleratedRendering mode for 
> iOS 12. I don’t think it will have much to do with the move command in 
> acceleratedRendering mode. I did recently fix something in 
> acceleratedRendering mode in a stack that had a group coming in from the side 
> that was doing some relayering… Oh… it’s possibly feasible that this is a 
> manifestation of the redraw issue that Brahma found with groups. Could 
> someone open a report with a sample stack and I can check if it’s working...
> 
>> On 4 Aug 2018, at 9:49 am, MWCM via use-livecode 
>>  wrote:
>> 
>> Are you testing in iOS 12? This is the exact problem I’m having (that Monte 
>> just patched today). 
>> 
>> Sounds like it should be fixed in 9.0.1.rc2
> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread Monte Goulding via use-livecode
Hmm… I patched the crash at startup when not in acceleratedRendering mode for 
iOS 12. I don’t think it will have much to do with the move command in 
acceleratedRendering mode. I did recently fix something in acceleratedRendering 
mode in a stack that had a group coming in from the side that was doing some 
relayering… Oh… it’s possibly feasible that this is a manifestation of the 
redraw issue that Brahma found with groups. Could someone open a report with a 
sample stack and I can check if it’s working...

> On 4 Aug 2018, at 9:49 am, MWCM via use-livecode 
>  wrote:
> 
> Are you testing in iOS 12? This is the exact problem I’m having (that Monte 
> just patched today). 
> 
> Sounds like it should be fixed in 9.0.1.rc2

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: Move command on iOS

2018-08-03 Thread MWCM via use-livecode
Are you testing in iOS 12? This is the exact problem I’m having (that Monte 
just patched today). 

Sounds like it should be fixed in 9.0.1.rc2

--Andrew Bell
--Sent from my iPhone

>>>>>>> 
> From: "J. Landman Gay" 
> To: LiveCode Mailing List 
> Subject: Move command on iOS
> Message-ID: 
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
> Anyone else having trouble with the move command on iOS? I'm sliding a 
> group into view, which works the first time, and after that it starts to 
> move and then immediately jumps to its destination without any 
> animation. It works fine in the IDE.
> 
> AccleratedRendering is true and the group layermode is "dynamic". I 
> don't have an actual phone to try it on, so maybe this is a simulator 
> problem?
> 
> -- 
> Jacqueline Landman Gay | jac...@hyperactivesw.com
> HyperActive Software   | http://www.hyperactivesw.com
> 


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Move command on iOS

2018-08-03 Thread J. Landman Gay via use-livecode
Anyone else having trouble with the move command on iOS? I'm sliding a 
group into view, which works the first time, and after that it starts to 
move and then immediately jumps to its destination without any 
animation. It works fine in the IDE.


AccleratedRendering is true and the group layermode is "dynamic". I 
don't have an actual phone to try it on, so maybe this is a simulator 
problem?


--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software   | http://www.hyperactivesw.com

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode